Assignment On Mannegement Information Systems
Assignment On Mannegement Information Systems
SYSTEMS
ASSIGNMENT ON
MANAGEMENT
INFORMATIONS
SYSTEMS
BY RAHUL GUPTA
Q 1: Define MIS? What are the characteristics of MIS?
Answer:
Introduction:
The area of study called MIS is sometimes referred to, in a restrictive sense, as
information technology management. That area of study should not be confused with
computer science. IT service management is a practitioner-focused discipline. MIS has also
some differences with Enterprise Resource Planning (ERP) as ERP incorporates elements
that are not necessarily focused on decision support. MIS has a major impact on the
functions of any organization.
The organization derives benefits from the systems in the following form:
a) Speedy access to information,
b) Interpretation of data,
c) Quick decisions,
d) Speedy actions,
e) Increased productivity and thereby increases in the profit
f) Reduced transaction cost.
MIS characteristics:
In any organization managers will have varieties of tasks to manage. MIS is mainly
designed to take care of the needs of the managers in the organization.
• Organizations will have different departments like marketing, production, sales,
inventory, maintenance etc. Each of these departments function individually and
also in relationship with other departments. Information is available in abundance.
Function of MIS:
The main function of MIS is to help the managers and the executives in the organization in
decision-making.
• Large quantities of data like customers’ information, competitors’ information,
personnel records, sales data, accounting data etc is collected from internal sources.
• Company records and external sources like annual reports and publications.
• The collected data is organized in the form of a database.
• The data from the database is processed and analyzed by using different tools and
techniques.
• The results of the analysis are properly presented to the managers to help them in
decision-making.
Answer:
An early example was the favorable position afforded American and United Airlines by
their reservation systems, Sabre and Apollo. For many years these two systems ensured that
the two carriers' flights appeared on the first screens observed by travel agents, thus
increasing their bookings relative to competitors. A major source of controversy
surrounding SIS is their sustainability.
It is mainly concerned with providing and organization and its members an assistance to
perform the routine tasks efficiently and effectively. One of the major issue before any
organization is the challenge of meeting its goals and objectives. Strategic IS enabling such
organization in realizing their goals. Strategic Information System (SIS) is a support to the
existing system and helps in achieving a competitive advantage over the organizations
competitors in terms of its objectives. This unit deals with the critical aspects of the
strategic information system.
This unit indicates the theoretical concepts and the way in which the same are realized
in practice. The flow of the unit is in such a way that it starts with the development of
contemporary theory about strategic uses of corporations' internal information systems
leading to systems which transcend the boundaries of particular organizations. The process
whereby strategic information systems are created or identified is then examined.
A number of weaknesses in the existing body of theory are identified, and suggestions
made as to directions in which knowledge is or may be progressing. A strategic information
system is concerned with systems which contribute significantly to the achievement of an
organization's overall objectives. The body of knowledge is of recent origin and highly
dynamic and the area have an aura of excitement about it. The emergence of the key ideas,
the process whereby strategic information systems come into being is assessed, areas of
weakness are identified, and directions of current and future development suggested.
Information system is regarded as a tool to provide various services to different
management functions.
The tools have been developing year by year and the application of the tool has become
more and more diverse. In management it is now a very power means to manage and
control various activities and decision making process. The original idea of automating
mechanical processes got quickly succeeded by the rationalization and integration of
systems. In both of these forms, IS was regarded primarily as an operational support tool,
and secondarily as a service to management. Subsequent to the development, it was during
the last few years that an additional potential was discovered. It was found that, in some
cases, information technology (IT) had been critical to the implementation of an
organization's strategy.
Answer:
• Introduction:
Information is a corporate resource, as important as the capital, labor, know-how etc.
and is being used for decision-making. Its quality, therefore, is required to be very high.
Low quality information would adversely affect the organizational performance as it affects
decision-making. The quality of information is the result of the quality of the input data,
processing design, system design, system and procedures which generate such a data, and
the management of the data processing function. Quality, unlike any other product, is not an
absolute concept. Its level is determined with reference to the context and its use, and the
user. Perfect quality just as perfect information is non-achievable and has cost-benefit
implications.
The quality of the parameters is assured if the following steps are taken.
• All the input is processed and controlled, as input and process design.
• All updating and corrections are completed before the data processing begins.
• Inputs (transactions, documents, fields and records) are subject to validity checks.
• The access to the data files is protected and secured through an authorization scheme
• Intermediate processing checks are introduced to ensure that the complete data is
processed right through, i.e. run to run controls.
• Due attention is given to the proper file selection in terms of data, periods and soon.
• Backup of the data and files are taken to safeguard corruption or loss of data.
• The system audit is conducted from time to time to ensure that the information
system specifications are not violated.
• The system modifications are approved by following a set procedure which begins
with authorization of a change to its implementation followed by an audit.
• Systems are developed with a standard specification of design and development.
• Information system processing is controlled through programmed control, process
control and access control.
The quality parameters which are generally considered are shown in the table.
Answer:
The Business application system demands designing of systems suitable to the application
in project. The major steps involved in the design are the following:
Input Design:
Input design is defined as the input requirement specification as per a format required.
Input design begins long before the data arrives at the device. The analyst will have to
design source documents, input screens and methods and procedures for getting the data
into the computer.
Output Design:
The design of the output is based on the requirement of the user manager, customer etc.
The output formats have to very friendly to the user. Therefore the designer has to ensure
the appropriateness of the of the output format.
Development:
When the design and its methodology are approved the system is developed using
appropriate business models. The development has to be in accordance to a given standard.
The norms have to be strictly adhered to.
Testing:
Exhaustive and thorough testing must be conducted to ascertain whether the system
produces the right results. Testing is time consuming: Test data must be carefully prepared,
result reviewed and corrections made in the system. In some instances, parts of the system
may have to be redesigned. Testing an information system can be broken down into three
types of activities. Unit testing, system tests and acceptance testing.
In a parallel strategy both the old system and its potential replacement are run
together for a time until everyone is assure that the new one functions correctly. This is the
safest conversion approach because, in the event of errors or processing disruption, the old
system can still be used as a backup. But, this approach is very expensive, and additional
staff or resources may be required to run the extra system.
The direct cutover strategy replaces the old system entirely with the new system on
an appointed day. At first glance, this strategy seems less costly than the parallel conversion
strategy. But, it is a very risky approach that can potentially be more costly than parallel
activities if serious problems with the new systems are found. There is no other system to
fall back on. Dislocation, disruptions and the cost of corrections are enormous.
The pilot strategy introduces the new system to only a limited area of the
organization, such as a single department or operating unit. When this version is complete
and working smoothly, it is installed throughout the rest of the organization, either
simultaneously or in stages. The phased strategy introduces the new system in stages, either
by functions or by organizational units. If, for example, the system is introduced by
functions, a new payroll system might begin with hourly workers who are paid weekly,
followed six months later by adding salaried employees (who paid monthly) to the system.
Maintenance is also necessary for other failures and problems that arise during the
operation of a system. End-users and information systems personnel then perform a
troubleshooting function to determine the causes of and solution to such problems.
Answer:
suppliers through secured access to information to act, wherever necessary. The cost of
business operations has come down significantly due to the elimination of paper-driven
processes, faster communication and effective collaborative working. The effect of these
radical changes is the reduction in administrative and management overheads, reduction in
inventory, faster delivery of goods and services to the customers.
use of Credit cards, Smart card, ATM, E-money are the examples of the Ecommerce
application. The digital firm, which uses Internet and web technology and uses E-business
and Ecommerce solutions, is a reality and is going to increase in number.
E-Commerce:
It is a second big application next to ERP. It is essential deals with buying and
selling of goods. With the advent of intent and web technology, E-Commerce today covers
an entire commercial scope online including design and developing, marketing, selling,
delivering, servicing, and paying for goods. Some E-Commerce application adds order
tracking as a feature for customer to know the delivery status of the order. The entire model
successfully works on web platform and uses internet technology. E-Commerce process has
two participants, namely Buyer and Seller, like in traditional business model. And unique
and typical to E-commerce there is one more participant to seller by authorization and
authentication of commercial transaction.
In B2B Model, buyer and seller are business organizations. They exchange technical &
commercial through websites and portals. Then model works on similar line like B2C.
More advanced B2B model uses Extranet and Conducts business transaction based on the
information
Status displayed on the buyer’s application server.
In C2C model, Customer Participates in the process of selling and buying through
the auction website. In this model, website is used for personal advertising of products or
services. Newspaper website is an Example of advertising and selling of goods to customer.
In B2B Model, the participants in E-business are two organization with relations as
buyer=seller, distributor-dealer and so on.
E-collaboration system components are internet, Intranet, Extranet and LAN, WAN
networks for communication through GroupWare tools, browser. Let us illustrate the model
using an event in the business such as receipt of material for a job to be processed on the
shop floor. In this event there is a transaction receipt of material, which needs to be
processed, and then a workgroup will use this information of material receipt. Each member
of this workgroup has a different goal.
Q 6: What is an internet? Explain the differences
between internet, intranet and extranet?
Answer:
Introduction:
Internet is a global network of interconnected computers, enabling users to share
information along multiple channels. Typically, a computer that connects to the Internet can
access information from a vast array of available servers and other computers by moving
information from them to the computer's local memory. The same connection allows that
computer to send information to servers on the network; that information is in turn accessed
and potentially modified by a variety of other interconnected computers. A majority of
widely accessible information on the Internet consists of inter-linked hypertext documents
and other resources of the World Wide Web (WWW).
Computer users typically manage sent and received information with web browsers;
other software for users' interface with computer networks includes specialized programs
for electronic mail, online chat, file transfer and file sharing. The movement of information
in the Internet is achieved via a system of interconnected computer networks that share data
by packet switching using the standardized Internet Protocol Suite (TCP/IP). It is a
"network of networks" that consists of millions of private and public, academic, business,
and government networks of local to global scope that are linked by copper wires, fiber
optic cables, wireless connections, and other technologies.
A. Extranet :
An extranet is a private network that uses the Internet protocols and the public
telecommunication system to securely share part of a business's information or operations
with suppliers, vendors, partners, customers, or other businesses. An extranet can be viewed
as part of a company's intranet that is extended to users outside the company. An extranet
requires security and privacy.
The professional development team at My Web Services has the expertise and the right
tools to design the right intranet or extranet that will meet your exact needs, both for today
and the future.
B. Intranet:
An internal use, private network inside an organization that uses the same kind of
software which would also be found on the Internet. Inter-connected network within one
organization that uses Web technologies for the sharing of information internally, not
worldwide. Such information might include organization policies and procedures,
announcements, or information about new products. An intranet is a restricted-access
network that works like the Web, but isn't on it. Usually owned and managed by a
company, an intranet enables a company to share its resources with its employees without
confidential information being made available to everyone with Internet access.
C. Internet: