Scribd
Upload
97 views

Ford Key Programming

KEY PROGRAMMING External fully charged battery pack connected to vehicle battery (Battery voltage 11.9v - 12.5v must be maintained during the complete procedure) MT Pro diagnostic pod must have been registered MT Pro access code to be available All keys must be present at time of programming. If an error is made at any time during the programming procedure All DTCs must be erased and the complete procedure repeated.

Uploaded by

Kandy Kn
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
97 views

Ford Key Programming

KEY PROGRAMMING External fully charged battery pack connected to vehicle battery (Battery voltage 11.9v - 12.5v must be maintained during the complete procedure) MT Pro diagnostic pod must have been registered MT Pro access code to be available All keys must be present at time of programming. If an error is made at any time during the programming procedure All DTCs must be erased and the complete procedure repeated.

Uploaded by

Kandy Kn
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

FORD

Copyright AUTODIAGNOS

FRD
APPLICATIONS


06-0001-01a
P.A.T.S. KEY PROGRAMMING
External fully charged battery pack connected to vehicle battery
(Battery voltage 11.9v - 12.5v must be maintained during the complete procedure)
MT Pro diagnostic pod must have been registered
MT Pro access code to be available
All keys must be present at time of programming
Diesel engines - Remove glow plug relay to prevent flat battery
1
Notes
1
If no communication is available, select '16 pin (ISO)' option
2
Once the timer has elapsed, the next step MUST be carried out within
a MAXIMUM of 1 minute.
N.B. If an error is made at any time during the programming procedure
ALL DTCs must be erased and the complete procedure repeated.
WAIT for timer to count down
2
Follow on screen instructions as they appear
Select
Programme new master/slave keys
Select
Count keys
Enter
MTpro Access Code
Clear any DTCs
Select
Programme new keys
If using 2 pin
- 2 or 3 key system
Select
DTCs
16 Pin (ISO) 2 Pin
PATS
Select Select
16 Pin (PWM)
If using 16 pin
- 2 key system
If using 16 pin
- 3 key system
Select
PROGRAMMING RED P.A.T.S. KEYS
Prerequisits:
Select
Diagnose
Select
FORD
Copyright AUTODIAGNOS

FRD
APPLICATIONS


06-0001-02a
P.A.T.S. KEY PROGRAMMING
External fully charged battery pack connected to vehicle battery
(Battery voltage 11.9v - 12.5v must be maintained during the complete procedure)
MT Pro diagnostic pod must have been registered
MT Pro access code to be available
All keys must be present at time of programming
Diesel engines - Remove glow plug relay to prevent flat battery
Notes
1
Once the timer has elapsed, the next step MUST be carried out within
a MAXIMUM of 1 minute.
N.B. If an error is made at any time during the programming procedure
ALL DTCs must be erased and the complete procedure repeated.
WAIT for timer to count down
1
Follow on screen instructions as they appear
Select
Erase Keys
Select
Programme new keys
Select
Count keys
Enter
MTpro Access Code
Clear any DTCs
Select
Programme new keys
Select
DTCs
PATS
Select
16 Pin (ISO)
PROGRAMMING BLUE P.A.T.S. KEYS
Prerequisits:
Select
Diagnose
Select

You might also like