Scribd
Upload
53 views1 page

Dx19 0113 RB

The Microlab Dx-19 series power splitters are 2, 3, or 4-way reactive dividers that evenly split high power cellular signals with minimal loss between 698-2700 MHz. They have IP65-rated aluminum housings, support up to 500W average power, and have very low insertion loss and PIM. The compact design allows for simple wall mounting using supplied clips.

Uploaded by

Renato De Lara
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
53 views1 page

Dx19 0113 RB

The Microlab Dx-19 series power splitters are 2, 3, or 4-way reactive dividers that evenly split high power cellular signals with minimal loss between 698-2700 MHz. They have IP65-rated aluminum housings, support up to 500W average power, and have very low insertion loss and PIM. The compact design allows for simple wall mounting using supplied clips.

Uploaded by

Renato De Lara
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Microlab, A Wireless Telecom Group Company, 25 Eastmans Road, Parsippany, NJ 07054

Tel: (973) 386-9696 [email protected] www.microlab.fxr.com Fax: (973) 386-9191


Power Splitters, Dx-19 series
2, 3 & 4 way Block & Tube Style, Reactive Dividers
Super wideband, 698 - 2,700 MHz, N or 7-16
Rev. B
Multiple-Band Frequency
Cellular, UMTS & WiFi
Up to 500W Average Power
Minimal RF Insertion Loss
High Reliability, IP65
Low Specified PIM
RoHS compliant
Low Cost Design
1.04
[26.5]
(.71
[18.0])
B
A
.63
[16.0]
n 1.02
[26.0]
C
J 4
J 3
J 2
J 1
MAX
Microlab Model Dx-19 series of 2, 3 and 4 way Power Splitters
available in 7-16 DIN and N versions, has been designed to evenly
split high power cellular signals with minimal reflections or loss. The
design allows simple attachment to wall using the supplied clips.
The wide frequency range allows use with multiband antennas
and leaky cable systems. With few solder joints and an air dielectric,
the loss has been minimized and reliability enhanced. Other similar
splitters are available with 380-2700 and 698-3800 MHz frequen-
cy ranges. (01/13)
4 Way and 2 Way Splitters
Version in N-type shown
Frequency Range: 698 - 2700 MHz
Impedance: 50 nominal
Power: N model 300W avg.
7-16 DIN 500W avg.
PIM, Passive IM: <-150 dBc
(2 tones at +43 dBm)
Environment: IP65, -35C to +85C
RoHS compliant
Finish: Connectors: (f) Triplate
Housing: Passivated aluminum
Mounting: Clips supplied
Model Number/Conn No. of Split Insertion Amplitude Input DIN Weight, nom. N Weight, nom.
7-16 DIN N Ways Loss Loss Balance, typ. VSWR lbs. (kg) lbs. (kg)
D2-19FD D2-19FN 2 3 dB <0.1 dB 0.20dB <1.20:1 0.68 (0.31) 0.51 (0.23)
D3-19FD D3-19FN 3 4.8 dB <0.1 dB 0.25dB <1.25:1 0.84 (0.38) 0.60 (0.27)
D4-19FD D4-19FN 4 6 dB <0.1 dB 0.40dB <1.30:1 0.97 (0.44) 0.66 (0.30)
$ Saver Product Line
Dimensions , Inches [mm]
D2-19FN D3-19FN D4-19FN Add for FD
A 7.75 [197] 8.94 [227] 8.94 [227] 0.07 [1.7]
B 7.01 [178] 7.52 [191] 7.52 [191] same
C 0.56 [14.2] 0.56 [14.2] 0.56 [14.2] same
Note: 2 way Splitter delete J3 & J4
3 way Splitter delete J4
4 way Splitter as drawn.
This dimension with
7-16 mm connectors
is 0.78 [19.7].
1.12
[28.5]

You might also like