RXEF250 is an overcurrent protection device from circuit protection products. Rated voltage is 72 volts, maximum current is 40 amps. UL, CSA and TUV have recognized this product.
RXEF250 is an overcurrent protection device from circuit protection products. Rated voltage is 72 volts, maximum current is 40 amps. UL, CSA and TUV have recognized this product.
RXEF250 is an overcurrent protection device from circuit protection products. Rated voltage is 72 volts, maximum current is 40 amps. UL, CSA and TUV have recognized this product.
RXEF250 is an overcurrent protection device from circuit protection products. Rated voltage is 72 volts, maximum current is 40 amps. UL, CSA and TUV have recognized this product.
Manufacturers Mark and Voltage Lot Identification Part Identification XF250 (can be on back) 72
TABLE I. DIMENSIONS: A B C D E MIN MAX MIN MAX MIN MAX MIN MAX MIN MAX mm: -- 20.8 -- 25.4 9.4 10.9 7.6 -- -- 3.0 in*: -- (0.82) -- (1.00) (0.37) (0.43) (0.30) -- -- (0.12) *Rounded off approximation
TABLE II. PERFORMANCE RATINGS : I HOLD RATED CURRENT CURRENT RATINGS INITIAL RESISTANCE VALUES TIME TO TRIP ONE HOUR POST-TRIP RESISTANCE STANDARD TRIP TRIPPED- STATE POWER DISSIPATION AMPERES AT 20C AMPERES AT 20C OHMS AT 20C SECONDS AT 20C, 12.5A OHMS AT 20C WATTS AT 20C HOLD HOLD TRIP MIN MAX MAX MAX NOMINAL 2.50 2.50 5.00 0.05 0.08 15.6 0.13 2.5
Agency Recognitions UL, CSA,TUV. Reference Documents: PS300 Precedence: This specification takes precedence over documents referenced herein. Effectivity: Reference documents shall be the issue in effect on the date of invitation for bid. CAUTION: Operation beyond the rated voltage or current may result in rupture, electrical arcing or flame.
Materials Information ROHS Compliant ELV Compliant Pb-Free
2005, 2007 Tyco Electronics Corporation. All rights reserved.
