Scribd
Upload
138 views2 pages

MML Commands

This document provides summaries of commands that can be used to output various parameters and information from a base station controller (BSC). Some of the commands output parameters for individual base transceiver stations (BTSs) like hopping parameters and power control settings, while others output information at the BSC level like signaling links and subscriber data. The document also lists some useful general commands for tasks like displaying directories, alarms, unit states, and circuit information.

Uploaded by

Tanveer Umar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
138 views2 pages

MML Commands

This document provides summaries of commands that can be used to output various parameters and information from a base station controller (BSC). Some of the commands output parameters for individual base transceiver stations (BTSs) like hopping parameters and power control settings, while others output information at the BSC level like signaling links and subscriber data. The document also lists some useful general commands for tasks like displaying directories, alarms, unit states, and circuit information.

Uploaded by

Tanveer Umar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
You are on page 1/ 2

Output BTS parameters including hopping:

ZEQO:BTS=1;
ZEQO:BTS=1:ALL;
Output Power Control Parameters:
ZEUO:BTS=1&&248;
Output TRX Parameters and Timeslots state:
ZERO:BTS=1&&248;
Output Adjacent Cell list and parameters:
ZEAO:BTS=1;
ZEAO:BTS=1:ABTS=2;
Output defined MA list from BSC:
ZEBI;
Ouput alarm records:
ZEOL:1; , where 1 is the BCF number
Display the log of all alarms for the whole BSC:
ZAHP;
Display alarm log for the selected alarm unit:
ZAHP:
Output HO related settings:
ZEHO:BTS=1;
Output frequency information:
ZEEI:BTS=1;
Output BTS alarm history:
ZEOH:2001-09-18:BCF=xx;
LapD Traffic:
DMF:
Output BSC parameters:
ZEEO;
Output co-channel adjacent cells:
ZEAT;
To list BSC function list:
WOI;
ZEGO:PAR;
To list the signaling links and loading:
ZOLT;
BSC level clear codes:
ZTVI:49:5;
BTS level clear codes:
ZTVI:47,2,NAKO3,0;
Display VLR subscriber:
ZMVI;
Display HLR subscriber:
ZMII;
Display number of circuit group:
ZCEL:CGR=7;
or
ZCEL:CGR=1;
Display quality of Transmission:
ZYMO:ET,1 (ET number);
Useful BSC Command
- General Commands
ZIWX :Display directory
ZAHO : Alarm currently on
ZEOL : BTS Alarms
ZUSI : Unit states
ZWIP : PCM circuit of identified switch
-A interface Related Commands
ZNEL : Signalling link states
ZNET : States of the links, the link sets and the route sets
ZNHI : SCCP subsystem states
ZRCI : Circuit and circuit gruops
ZDRI : Synchonization
ZQWI : Service channel configuration
ZNRI : Signalling point data
-ABIS interface Related commands
ZEEI : Radio Network Configuration states
ZEFO : BCF states and parameters
ZEQO : BTS states and parameters
ZERO : TRS states and parameters
ZEOL : BTS Alarm currently on
ZDTI : D-channel states
ZRCI : Circuit and circuit gruop
ZDSB : D-channel parameters
ZRBI : Semipermanent Broadband connection
- BCF SW Related Commands
ZEWL : Existing SW packages
ZEWO : SW Configuration of a BCF
ZEWP : Content of a SW package
- BSC SW Related Commands
ZWQO : SW packages and active package
ZWQH : SW packages change history
Check BTS belong to PCU
ZFWO:BCSU=0&&6:BTS;
Check Measurement file from BSC to OMC
ZIFO:OMU:MEASUR;

You might also like