Scribd Logo
Upload

Welcome to Scribd!

  • 3K views

    GE 7EA Gas Turbine Details

    Uploaded by

    Hernan Giraut
    This document describes a bearing housing assembly that uses a triple-pipe design to provide three separate air passages to the bearing. The inner and outer piping is fabricated as a pipe within a pipe within a pipe. The bearing housing assembly includes upper and lower halves connected by bolts, with a bearing cap also attached by bolts and containing the bearing, liner, seals, and passages for oil feed and drain to/from the bearing liner.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    GE 7EA Gas Turbine Details

    Uploaded by

    Hernan Giraut
    3K views10 pages
    This document describes a bearing housing assembly that uses a triple-pipe design to provide three separate air passages to the bearing. The inner and outer piping is fabricated as a pipe within a pipe within a pipe. The bearing housing assembly includes upper and lower halves connected by bolts, with a bearing cap also attached by bolts and containing the bearing, liner, seals, and passages for oil feed and drain to/from the bearing liner.

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document describes a bearing housing assembly that uses a triple-pipe design to provide three separate air passages to the bearing. The inner and outer piping is fabricated as a pipe within a pipe within a pipe. The bearing housing assembly includes upper and lower halves connected by bolts, with a bearing cap also attached by bolts and containing the bearing, liner, seals, and passages for oil feed and drain to/from the bearing liner.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    3K views10 pages

    GE 7EA Gas Turbine Details

    Uploaded by

    Hernan Giraut
    This document describes a bearing housing assembly that uses a triple-pipe design to provide three separate air passages to the bearing. The inner and outer piping is fabricated as a pipe within a pipe within a pipe. The bearing housing assembly includes upper and lower halves connected by bolts, with a bearing cap also attached by bolts and containing the bearing, liner, seals, and passages for oil feed and drain to/from the bearing liner.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 10

    Cooling & Sealing Air Piping.

    Fabricated As A Pipe Within


    A Pipe Within A Pipe To
    Provide 3 Separate Air
    Passages To The Bearing.
    Piping - Vent I nner & Outer
    Fabricated As A Pipe Within
    A Pipe Within A Pipe To
    Provide 3 Separate Air
    Passages To The Bearing.
    Bearing Housing
    Upper Half
    Bearing Housing
    Assembly Bolts
    Bearing Cap
    Assembly Bolts
    Bearing Cap
    Bearing
    Liner
    AFT Air
    Seal
    Bearing
    Housing
    Oil Feed To
    #2 Brg Liner
    Lower Half
    Anti -
    Rotation
    Pin
    Seal
    AFT Oil
    Seal
    FWD Oil
    Seal
    FWD Air
    Oil Feed To
    #2 Brg Liner
    #2 Brg Liner
    Oil Drain From
    Oil Drain From
    #2 Brg Liner
    Wrapper
    Combustion
    5th Stage
    Extraction
    Clg & Slg Air
    To Mist
    Eliminator
    To
    Exhaust
    BRG01X 2/94
    ROTOR

    You might also like