Scribd
Upload
1K views9 pages

MSA Sample Presentation

The document discusses measurement systems analysis (MSA). It states that QS 9000 requires an MSA to be conducted on all inspection, measuring, and test devices listed on a control plan. It then defines MSA and explains that an MSA determines the error of a measuring device compared to its tolerance. The document lists the components of an MSA as gauge repeatability, gauge reproducibility, bias, linearity, and stability. It defines gauge repeatability and reproducibility, which make up gauge R&R studies, and lists the three types of gauge R&R studies.

Uploaded by

Tom@GGC
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
1K views9 pages

MSA Sample Presentation

The document discusses measurement systems analysis (MSA). It states that QS 9000 requires an MSA to be conducted on all inspection, measuring, and test devices listed on a control plan. It then defines MSA and explains that an MSA determines the error of a measuring device compared to its tolerance. The document lists the components of an MSA as gauge repeatability, gauge reproducibility, bias, linearity, and stability. It defines gauge repeatability and reproducibility, which make up gauge R&R studies, and lists the three types of gauge R&R studies.

Uploaded by

Tom@GGC
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
You are on page 1/ 9

Measurement Systems Analysis

Presented by: {Name}


Course Objectives
• By the end of the course the
participant should be able to;
• Identify what constitutes a
Measurement Systems Analysis
• Complete and understand all types of
Measurement Systems Analysis

World Class Quality Pty Ltd 2


Measurement Systems Analysis

QS 9000 requires a Measurement Systems


Analysis be conducted on all inspection,
measuring and test devices denoted on the
Control plan.

World Class Quality Pty Ltd 3


Measurement Systems Analysis

• What is Measurement Systems Analysis


(MSA)?
– A Measurement System Analysis (MSA)
determines the error in the measuring
device in comparison to the tolerance.

World Class Quality Pty Ltd 4


Measurement Systems Analysis

• Measurement Systems Analysis (MSA)


consists of?

– Gauge Repeatability
– Gauge Reproducibility
– Bias
– Linearity
– Stability

World Class Quality Pty Ltd 5


Measurement Systems Analysis

• So what is Gauge R&R?


Gauge R&R is an acronym
for Gauge
Repeatability
and
Reproducibility

World Class Quality Pty Ltd 6


Measurement Systems Analysis

• Definition of Gauge Repeatability


– Repeatability
• The ability of a measurement device to repeat its
reading when used several times by the same operator
to measure the same characteristic. Generally this is
referred to as Equipment variation.

– Repeatability = Equipment
Variation

World Class Quality Pty Ltd 7


Measurement Systems Analysis

• Definition of Gauge Reproducibility


– Reproducibility
• The variation between the averages of the
measurements taken by different operators
using the same measurement device and
measuring the same characteristic. Generally
this is referred to as Operator Variation

Reproducibility = Operator
Variation
World Class Quality Pty Ltd 8
Measurement Systems Analysis

• There are three types of Gauge R&R


studies
– Variable - Short Method (Range method)
– Variable - Long Method (Average & Range
method)
– Attribute Gauge study

World Class Quality Pty Ltd 9

You might also like