Associated Technical Services Co. W. L. L.

2014

Skylight steel framing support Page 1


Project:
Design of Skylight steel support framing


Document Title:
Proposed (B+G+M+1) Commercial showrooms &
Residential Apartment Pin no: 74100454

Structural Design Calculation
05 APRIL 2014



Revision History
Revision Date Description Prepared by Approved by
0 05 April 2014 First Issue







Associated Technical Services Co. W. L. L. 2014

Skylight steel framing support Page 2

TABLE OF CONTENTS
1.) Rationale 3
2.) Design Concept
2.1 Ultimate Limit State (ULS) 4
2.2 Serviceability Limit State (SLS) 4

3.) Structural Design Criteria
3.1 Basic Codes and Standards 4
3.2 Structural Materials 5
3.3 Loadings 5
3.4 Acceptance Criteria Parameters 6
3.5 Structural Software 7
4.) Structural Analysis and Design
4.1 Loadings 8
4.2 Analysis and design 9-20
4.3 Design Summary 21














Associated Technical Services Co. W. L. L. 2014

Skylight steel framing support Page 3

1 Rationale
This report will provide statement of the design basis, principle, methodology and
parameters for the design of skylight steel beams. The overall design will be in
accordance with the relevant British Standards.

2 Design Concept
All structural steelwork will be designed and detailed based on the most critical limit
state (ultimate limit state) and check to ensure that the remaining limit states
(serviceability limit states) will not be reached in accordance with BS 5950
Part1:2000.
The skylight steel beam will be design to accommodate a 14.50 meters span for
UB356x171x57 beam with maximum span of 3.574 meter and 15.446 meters for
UB203x103x23 beam with maximum span of 3.045 meter. The typical arrangement
for Skylight Steel beam of the support system is presented in the succeeding figures.


Associated Technical Services Co. W. L. L. 2014

Skylight steel framing support Page 4

2.1 Ultimate Limit State (ULS)
All structural steelwork will be designed to ensure the stability and durability from
the action of design ultimate loads. The structure will be assessed in this state based
on the following load combinations:
1.4D + 1.6 LV
1.4D + 1.6LL + 1.4 LH
Note: D = dead load including selfweight; LV = live load due to vertical crane load; LH = live load due to
horizontal crane load
2.2 Serviceability Limit State (SLS)
All structural steelwork will be checked during its service based on the following load
combinations:
1.0D + 1.0LL
Note: D = dead load including self weight; LL = live load
3 Structural Design Criteria
3.1 Basic Codes and Standards
All structural steelwork will be designed in accordance with the applicable
requirements and recommendations BS 5950 Part 1: 2000 and related standards, to
meet or exceed the specified performance. The requirements and recommendations
of these codes and standards are to be regarded as minimum criteria, and the
designers will utilize the values specified within this document, where these prove
more onerous.
Table 4.1 Codes and Standards
Codes and Standards Description
BS 5950 Part 1: 2000 Structural Use of Steelwork in Building
BS 7668 : 2000 Specification for weldable structural steels
BS 449 Specification for the use of structural steel in building
BS 4 Part 1:1993 Structural steel section. Specification for hot-rolled
section
QCS 2010 Qatar Construction Standards



Associated Technical Services Co. W. L. L. 2014

Skylight steel framing support Page 5

3.2 Structural Materials
The structural steel is to conform to BS EN 10025: Hot rolled products of non-alloy
structural steel , BS 4 Part 1: Specification for hot rolled sections , BS 4848: Hot
rolled Structural steel section and BS 5950 Part 1:2000 Structural use of steel work.
The following design strengths are to be used for steels supplied to BS 7668: 2000.

All structural steelwork will generally be designed using a grade S275 steel. In
specific cases, where there is constraints in member depths and sizes high grade
S355 steel will be used.
3.3 Loadings
Loadings are based on the information provided by the client.
3.3.1 Dead Loads
Dead loads are to be calculated in accordance with BS 648, project specification and
proprietary material technical data information from the supplier. As a guide the
following dead load allowances may be assumed where appropriate:
Table 4.2 Dead loads
Material Weight
Skylight +Aluminum+glass 56 kg/m
2
= 0.55 kN/m
2


3.3.2 Live Loads
The loading requirements in the design of cable supports and connection were
considered during installation, operation, accidental blast due to short circuit and
maintenance. The specific live loads are presented in tables 4.3
The skylight steel beam was designed to sustain an impact load of 25% of the total
Uniform distributed load including sand load has been considered for the design of
the connections.
Table 4.3 Live Loads
Specific Use Uniform Distributed Load,
kN/m
2

Concentrated Load
Sand load 0.40 kN/m
2

Skylight 0.75 kN/m
2





Associated Technical Services Co. W. L. L. 2014

Skylight steel framing support Page 6

3.4 Acceptance Criteria Parameters
3.4.1 Deflections
For structural steel, vertical deflection shall not exceed the following:
Roof panel - Span/180
Frames(DL + LL) - Span/200

3.5 Structural Software
The structural system will be modeled in STAAD using 2D frame concept.




























Associated Technical Services Co. W. L. L. 2014

Skylight steel framing support Page 7


4 Structural Analysis and Design
4.1 Loadings
The skylight is being restrained by skylight steel beam UB356x171x57 with a
maximum spacing of 3.574 meters and UB 203x103x23 with a maximum spacing of
3.045 meters.

Span length of the UB356x171x57 L
356
= 3.574 m
Span length of the UB203x103x23 L
203
= 3.045 m

The following design loads have been considered in the analysis:
For uniform load on a skylight roof, outward force is equal to one-fourth (25%) the
total load (on both slopes of entire roof) times the inverted ratio of roof slope.


Deadloads:
Liveloads:
UB356x171x57:
Loading span of beam =3.045m
UB356x171x57:
Loading span of beam = 3.045 m
Load on beam = 0.55 x 3.045 =1.73 KN/mm
UB203x103x23:
Loading span of beam = 3.574 m
Load on beam = 0.55 x 3.574 =1.9657 KN/mm
load on beam = (0.75 + 0.4) x 3.045 = 3.50KN/m
UB203x103x23:
Loading span of beam =3.574m
load on beam = (0.75 + 0.4) x 3.574 =4.11 KN/m
Software licensed to
Job Title
Client
Job No Sheet No Rev
Part
Ref
By Date Chd
File Date/Time
1
02-Mar-14
03-May-2014 16:20 356X171X57.std
Print Time/Date: 04/05/2014 08:49 Print Run 1 of 7
STAAD.Pro V8i (SELECTseries 5) 20.07.10.41
4
3
2
1
Load 3
X
Y
Z
Whole Structure
3.57m
3.57m
3.57m
3.57m
Load 3
X
Y
Z
Whole Structure
Beam No
Beam Length (in m)
Software licensed to
Job Title
Client
Job No Sheet No Rev
Part
Ref
By Date Chd
File Date/Time
2
02-Mar-14
03-May-2014 16:20 356X171X57.std
Print Time/Date: 04/05/2014 08:49 Print Run 2 of 7
STAAD.Pro V8i (SELECTseries 5) 20.07.10.41
UB356X171X57
UB356X171X57
UB356X171X57
UB356X171X57
Load 3
X
Y
Z
Whole Structure
-1.730 kN/m
-1.730 kN/m
-1.730 kN/m
-1.730 kN/m
Load 1
X
Y
Z
Whole Structure
Member Properties
Total Dead load (DL)
Software licensed to
Job Title
Client
Job No Sheet No Rev
Part
Ref
By Date Chd
File Date/Time
3
02-Mar-14
03-May-2014 16:20 356X171X57.std
Print Time/Date: 04/05/2014 08:49 Print Run 3 of 7
STAAD.Pro V8i (SELECTseries 5) 20.07.10.41
-3.500 kN/m
-3.500 kN/m
-3.500 kN/m
-3.500 kN/m
Load 2
X
Y
Z
Whole Structure
-1.730 kN/m
-3.500 kN/m
-1.730 kN/m
-3.500 kN/m
-1.730 kN/m
-3.500 kN/m
-1.730 kN/m
-3.500 kN/m
Load 3
X
Y
Z
Whole Structure
Total Live Load (LL)
Load combination : DL + LL
Software licensed to
Job Title
Client
Job No Sheet No Rev
Part
Ref
By Date Chd
File Date/Time
4
02-Mar-14
03-May-2014 16:20 356X171X57.std
Print Time/Date: 04/05/2014 08:49 Print Run 4 of 7
STAAD.Pro V8i (SELECTseries 5) 20.07.10.41
-2.422 kN/m
-5.600 kN/m
-2.422 kN/m
-5.600 kN/m
-2.422 kN/m
-5.600 kN/m
-2.422 kN/m
-5.600 kN/m
Load 4
X
Y
Z
Whole Structure
Load combination : 1.4 DL + 1.6 LL
Software licensed to
Job Title
Client
Job No Sheet No Rev
Part
Ref
By Date Chd
File Date/Time
5
02-Mar-14
03-May-2014 16:20 356X171X57.std
Print Time/Date: 04/05/2014 08:49 Print Run 5 of 7
STAAD.Pro V8i (SELECTseries 5) 20.07.10.41
Max: 3.047 kNm Max: 3.047 kNm
Max: 3.047 kNm Max: 3.047 kNm
Bending Z Load 1 :
Moment - kNm
X
Y
Z
Whole Structure Mz 5kNm:1m 1 DEAD LOAD
Max Bending Moment
Software licensed to
Job Title
Client
Job No Sheet No Rev
Part
Ref
By Date Chd
File Date/Time
6
02-Mar-14
03-May-2014 16:20 356X171X57.std
Print Time/Date: 04/05/2014 08:49 Print Run 6 of 7
STAAD.Pro V8i (SELECTseries 5) 20.07.10.41
Max: 4.941 kN
Max: -4.336 kN
Max: 4.336 kN
Max: -4.941 kN
Shear Y Load 1 :
Force - kN
X
Y
Z
Whole Structure Fy 10kN:1m 1 DEAD LOAD
Max shear force
Software licensed to
Job Title
Client
Job No Sheet No Rev
Part
Ref
By Date Chd
File Date/Time
7
02-Mar-14
03-May-2014 16:20 356X171X57.std
Print Time/Date: 04/05/2014 08:49 Print Run 7 of 7
STAAD.Pro V8i (SELECTseries 5) 20.07.10.41
Max: 0.074 mm
Max: 0.021 mm
Max: 0.021 mm
Max: 0.074 mm
Displacement Load 1 :
Displacement - mm
X
Y
Z
Whole Structure Displacements 0.07mm:1m 1 DEAD LOAD
Max Displacement
Sunday, May 04, 2014, 08:29 AM
PAGE NO. 1


****************************************************
* *
* STAAD.Pro V8i SELECTseries4 *
* Version 20.07.09.21 *
* Proprietary Program of *
* Bentley Systems, Inc. *
* Date= MAY 4, 2014 *
* Time= 8:29:19 *
* *
* USER ID: KEOIC *
****************************************************


1. STAAD SPACE
I NPUT FI LE: 356X171X57. STD
2. START J OB I NFORMATI ON
3. ENGI NEER DATE 02- MAR- 14
4. END J OB I NFORMATI ON
5. I NPUT WI DTH 79
6. UNI T METER KN
7. J OI NT COORDI NATES
8. 1 0 0 0; 2 3. 574 0 0; 3 7. 148 0 0; 4 10. 722 0 0; 5 14. 296 0 0
9. MEMBER I NCI DENCES
10. 1 1 2; 2 2 3; 3 3 4; 4 4 5
11. DEFI NE MATERI AL START
12. I SOTROPI C STEEL
13. E 2. 05E+008
14. POI SSON 0. 3
15. DENSI TY 76. 8195
16. ALPHA 1. 2E- 005
17. DAMP 0. 03
18. TYPE STEEL
19. STRENGTH FY 253200 FU 407800 RY 1. 5 RT 1. 2
20. END DEFI NE MATERI AL
21. MEMBER PROPERTY BRI TI SH
22. 1 TO 4 TABLE ST UB356X171X57
23. CONSTANTS
24. MATERI AL STEEL ALL
25. SUPPORTS
26. 1 TO 4 PI NNED
27. 5 FI XED BUT MY MZ
28. DEFI NE MOVI NG LOAD
29. TYPE 1 LOAD 25
30. DI ST 0
31. LOAD 1 LOADTYPE DEAD TI TLE DEAD LOAD
32. SELFWEI GHT Y - 1
33. MEMBER LOAD
34. 1 TO 4 UNI GY - 1. 73
35. LOAD 2 LOADTYPE NONE TI TLE LI VE LOAD
36. MEMBER LOAD
37. 1 TO 4 UNI GY - 3. 5
38. LOAD COMB 3 DL + LL
Page 1 of 9 C:\A MARS\WAQAR\4th May\356X171X57.anl
ATTACHMENT-1 : STAAD ANALYSIS OF BEAM UB 356X171X57
Sunday, May 04, 2014, 08:29 AM
STAAD SPACE - - PAGE NO. 2
39. 1 1. 0 2 1. 0
40. LOAD COMB 4 1. 4 DL + 1. 6 LL
41. 1 1. 4 2 1. 6
42. PERFORM ANALYSI S PRI NT ALL


P R O B L E M S T A T I S T I C S
-----------------------------------

NUMBER OF JOINTS 5 NUMBER OF MEMBERS 4
NUMBER OF PLATES 0 NUMBER OF SOLIDS 0
NUMBER OF SURFACES 0 NUMBER OF SUPPORTS 5

SOLVER USED IS THE OUT-OF-CORE BASIC SOLVER
ORIGINAL/FINAL BAND-WIDTH= 1/ 1/ 6 DOF
TOTAL PRIMARY LOAD CASES = 2, TOTAL DEGREES OF FREEDOM = 14
SIZE OF STIFFNESS MATRIX = 1 DOUBLE KILO-WORDS
REQRD/AVAIL. DISK SPACE = 12.0/ 122035.0 MB

Page 2 of 9 C:\A MARS\WAQAR\4th May\356X171X57.anl
Sunday, May 04, 2014, 08:29 AM
STAAD SPACE - - PAGE NO. 3


LOADI NG 1 LOADTYPE DEAD TI TLE DEAD LOAD
- - - - - - - - - - -

SELFWEI GHT Y - 1. 000

ACTUAL WEI GHT OF THE STRUCTURE = 7. 973 KN


MEMBER LOAD - UNI T KN METE

MEMBER UDL L1 L2 CON L LI N1 LI N2

1 - 1. 7300 GY 0. 00 3. 57
2 - 1. 7300 GY 0. 00 3. 57
3 - 1. 7300 GY 0. 00 3. 57
4 - 1. 7300 GY 0. 00 3. 57


LOADI NG 2 LOADTYPE NONE TI TLE LI VE LOAD
- - - - - - - - - - -


MEMBER LOAD - UNI T KN METE

MEMBER UDL L1 L2 CON L LI N1 LI N2

1 - 3. 5000 GY 0. 00 3. 57
2 - 3. 5000 GY 0. 00 3. 57
3 - 3. 5000 GY 0. 00 3. 57
4 - 3. 5000 GY 0. 00 3. 57


FOR LOADI NG - 1
APPLI ED J OI NT EQUI VALENT LOADS
J OI NT FORCE- X FORCE- Y FORCE- Z MOM- X MOM- Y MOM- Z
1 0. 00000E+00- 4. 08814E+00 0. 00000E+00 0. 00000E+00 0. 00000E+00- 2. 43517E+00
2 0. 00000E+00- 8. 17627E+00 0. 00000E+00 0. 00000E+00 0. 00000E+00- 2. 15501E- 07
3 0. 00000E+00- 8. 17627E+00 0. 00000E+00 0. 00000E+00 0. 00000E+00 4. 31003E- 07
4 0. 00000E+00- 8. 17627E+00 0. 00000E+00 0. 00000E+00 0. 00000E+00- 1. 07751E- 06
5 0. 00000E+00- 4. 08814E+00 0. 00000E+00 0. 00000E+00 0. 00000E+00 2. 43517E+00

STATI C LOAD/ REACTI ON/ EQUI LI BRI UM SUMMARY FOR CASE NO. 1
LOADTYPE DEAD TI TLE DEAD LOAD


CENTER OF FORCE BASED ON Y FORCES ONLY ( METE) .
( FORCES I N NON- GLOBAL DI RECTI ONS WI LL I NVALI DATE RESULTS)

X = 0. 714800010E+01
Y = 0. 000000000E+00
Z = 0. 000000000E+00
Page 3 of 9 C:\A MARS\WAQAR\4th May\356X171X57.anl
Sunday, May 04, 2014, 08:29 AM
STAAD SPACE - - PAGE NO. 4

***TOTAL APPLI ED LOAD ( KN METE ) SUMMARY ( LOADI NG 1 )
SUMMATI ON FORCE- X = 0. 00
SUMMATI ON FORCE- Y = - 32. 71
SUMMATI ON FORCE- Z = 0. 00

SUMMATI ON OF MOMENTS AROUND THE ORI GI N-
MX= 0. 00 MY= 0. 00 MZ= - 233. 78


***TOTAL REACTI ON LOAD( KN METE ) SUMMARY ( LOADI NG 1 )
SUMMATI ON FORCE- X = 0. 00
SUMMATI ON FORCE- Y = 32. 71
SUMMATI ON FORCE- Z = 0. 00

SUMMATI ON OF MOMENTS AROUND THE ORI GI N-
MX= 0. 00 MY= 0. 00 MZ= 233. 78


MAXI MUM DI SPLACEMENTS ( CM / RADI ANS) ( LOADI NG 1)
MAXI MUMS AT NODE
X = 0. 00000E+00 0
Y = 0. 00000E+00 0
Z = 0. 00000E+00 0
RX= 0. 00000E+00 0
RY= 0. 00000E+00 0
RZ= 8. 10716E- 05 5



EXTERNAL AND I NTERNAL J OI NT LOAD SUMMARY ( KN METE ) -

J T EXT FX/ EXT FY/ EXT FZ/ EXT MX/ EXT MY/ EXT MZ/
I NT FX I NT FY I NT FZ I NT MX I NT MY I NT MZ

SUPPORT=1
1 0. 00 - 4. 09 0. 00 0. 00 0. 00 - 2. 44
0. 00 0. 85 0. 00 0. 00 0. 00 2. 44 111000

2 0. 00 - 8. 18 0. 00 0. 00 0. 00 0. 00
0. 00 - 1. 10 0. 00 0. 00 0. 00 0. 00 111000

3 0. 00 - 8. 18 0. 00 0. 00 0. 00 0. 00
0. 00 0. 50 0. 00 0. 00 0. 00 0. 00 111000

4 0. 00 - 8. 18 0. 00 0. 00 0. 00 0. 00
0. 00 - 1. 10 0. 00 0. 00 0. 00 0. 00 111000

5 0. 00 - 4. 09 0. 00 0. 00 0. 00 2. 44
0. 00 0. 85 0. 00 0. 00 0. 00 - 2. 44 111100

FOR LOADI NG - 2
APPLI ED J OI NT EQUI VALENT LOADS
J OI NT FORCE- X FORCE- Y FORCE- Z MOM- X MOM- Y MOM- Z
1 0. 00000E+00- 6. 25450E+00 0. 00000E+00 0. 00000E+00 0. 00000E+00- 3. 72560E+00
2 0. 00000E+00- 1. 25090E+01 0. 00000E+00 0. 00000E+00 0. 00000E+00 0. 00000E+00
3 0. 00000E+00- 1. 25090E+01 0. 00000E+00 0. 00000E+00 0. 00000E+00 8. 62006E- 07
4 0. 00000E+00- 1. 25090E+01 0. 00000E+00 0. 00000E+00 0. 00000E+00- 1. 72401E- 06
5 0. 00000E+00- 6. 25450E+00 0. 00000E+00 0. 00000E+00 0. 00000E+00 3. 72560E+00

STATI C LOAD/ REACTI ON/ EQUI LI BRI UM SUMMARY FOR CASE NO. 2
LOADTYPE NONE TI TLE LI VE LOAD

Page 4 of 9 C:\A MARS\WAQAR\4th May\356X171X57.anl
Sunday, May 04, 2014, 08:29 AM
STAAD SPACE - - PAGE NO. 5

CENTER OF FORCE BASED ON Y FORCES ONLY ( METE) .
( FORCES I N NON- GLOBAL DI RECTI ONS WI LL I NVALI DATE RESULTS)

X = 0. 714800002E+01
Y = 0. 000000000E+00
Z = 0. 000000000E+00

***TOTAL APPLI ED LOAD ( KN METE ) SUMMARY ( LOADI NG 2 )
SUMMATI ON FORCE- X = 0. 00
SUMMATI ON FORCE- Y = - 50. 04
SUMMATI ON FORCE- Z = 0. 00

SUMMATI ON OF MOMENTS AROUND THE ORI GI N-
MX= 0. 00 MY= 0. 00 MZ= - 357. 66


***TOTAL REACTI ON LOAD( KN METE ) SUMMARY ( LOADI NG 2 )
SUMMATI ON FORCE- X = 0. 00
SUMMATI ON FORCE- Y = 50. 04
SUMMATI ON FORCE- Z = 0. 00

SUMMATI ON OF MOMENTS AROUND THE ORI GI N-
MX= 0. 00 MY= 0. 00 MZ= 357. 66


MAXI MUM DI SPLACEMENTS ( CM / RADI ANS) ( LOADI NG 2)
MAXI MUMS AT NODE
X = 0. 00000E+00 0
Y = 0. 00000E+00 0
Z = 0. 00000E+00 0
RX= 0. 00000E+00 0
RY= 0. 00000E+00 0
RZ= 1. 24033E- 04 5



EXTERNAL AND I NTERNAL J OI NT LOAD SUMMARY ( KN METE ) -

J T EXT FX/ EXT FY/ EXT FZ/ EXT MX/ EXT MY/ EXT MZ/
I NT FX I NT FY I NT FZ I NT MX I NT MY I NT MZ

SUPPORT=1
1 0. 00 - 6. 25 0. 00 0. 00 0. 00 - 3. 73
0. 00 1. 30 0. 00 0. 00 0. 00 3. 73 111000

2 0. 00 - 12. 51 0. 00 0. 00 0. 00 0. 00
0. 00 - 1. 68 0. 00 0. 00 0. 00 0. 00 111000

3 0. 00 - 12. 51 0. 00 0. 00 0. 00 0. 00
0. 00 0. 76 0. 00 0. 00 0. 00 0. 00 111000

4 0. 00 - 12. 51 0. 00 0. 00 0. 00 0. 00
0. 00 - 1. 68 0. 00 0. 00 0. 00 0. 00 111000

5 0. 00 - 6. 25 0. 00 0. 00 0. 00 3. 73
0. 00 1. 30 0. 00 0. 00 0. 00 - 3. 73 111100


LOAD COMBI NATI ON NO. 3
DL + LL
Page 5 of 9 C:\A MARS\WAQAR\4th May\356X171X57.anl
Sunday, May 04, 2014, 08:29 AM
STAAD SPACE - - PAGE NO. 6

LOADI NG- 1. 2.
FACTOR - 1. 00 1. 00

LOAD COMBI NATI ON NO. 4
1. 4 DL + 1. 6 LL

LOADI NG- 1. 2.
FACTOR - 1. 40 1. 60


************ END OF DATA FROM I NTERNAL STORAGE ************


43. PARAMETER 1
44. CODE BS5950
45. DFF 200 ALL
46. TRACK 4 ALL
47. CHECK CODE ALL


STAAD. Pr o CODE CHECKI NG - ( BSI )
***********************
PROGRAM CODE REVI SI ON V2. 13_5950- 1_2000
Page 6 of 9 C:\A MARS\WAQAR\4th May\356X171X57.anl
Sunday, May 04, 2014, 08:29 AM
STAAD SPACE - - PAGE NO. 7
CLAUSE BS-2.5.1 CHECKS
LENGTH UNITS - METE
MEMBER TABLE RESULT ACTUAL DEFL. DEFL.LEN/ LOAD/
DEFL. LIMIT DFF LOCATION
=======================================================================
1 ST UB356X171X57 PASS 0. 000 0. 018 3. 574 4
200. 000 1. 49
2 ST UB356X171X57 PASS 0. 000 0. 018 3. 574 4
200. 000 1. 79
3 ST UB356X171X57 PASS 0. 000 0. 018 3. 574 4
200. 000 1. 79
4 ST UB356X171X57 PASS 0. 000 0. 018 3. 574 4
200. 000 2. 08


************** END OF TABULATED RESULT OF DESI GN **************


48. FI NI SH


*********** END OF THE STAAD. Pr o RUN ***********

**** DATE= MAY 4, 2014 TI ME= 8: 29: 20 ****

Page 7 of 9 C:\A MARS\WAQAR\4th May\356X171X57.anl
Sunday, May 04, 2014, 08:29 AM
STAAD SPACE - - PAGE NO. 8
************************************************************
* For quest i ons on STAAD. Pr o, pl ease cont act *
* Bent l ey Syst ems or Par t ner of f i ces *
* *
* Tel ephone Web / Emai l *
* USA +1 ( 714) 974- 2500 *
* UK +44 ( 0) 808 101 9246 *
* SI NGAPORE +65 6225- 6158 *
* FRANCE +33 ( 0) 1 55238400 *
* GERMANY +49 0931 40468 *
* I NDI A +91 ( 033) 4006- 2021 *
* J APAN +81 ( 03) 5952- 6500 ht t p: / / www. ct c- g. co. j p *
* CHI NA +86 21 6288 4040 *
* THAI LAND +66 ( 0) 2645- 1018/ 19 par t ha. p@r ei sof t war et h. com*
* *
* Wor l dwi de ht t p: / / sel ect ser vi ces. bent l ey. com/ en- US/ *
* *
************************************************************
Page 8 of 9 C:\A MARS\WAQAR\4th May\356X171X57.anl
Software licensed to
Job Title
Client
Job No Sheet No Rev
Part
Ref
By Date Chd
File Date/Time
1
02-Mar-14
03-May-2014 15:44 203X103X23.std
Print Time/Date: 04/05/2014 08:47 Print Run 1 of 7
STAAD.Pro V8i (SELECTseries 5) 20.07.10.41
4
3
2
1
Load 1
X
Y
Z
Whole Structure
3.05m
3.05m
3.05m
3.05m
Load 1
X
Y
Z
Whole Structure
Beam No
Beam Length (in m)
Software licensed to
Job Title
Client
Job No Sheet No Rev
Part
Ref
By Date Chd
File Date/Time
2
02-Mar-14
03-May-2014 15:44 203X103X23.std
Print Time/Date: 04/05/2014 08:47 Print Run 2 of 7
STAAD.Pro V8i (SELECTseries 5) 20.07.10.41
UB203X102X23
UB203X102X23
UB203X102X23
UB203X102X23
Load 1
X
Y
Z
Whole Structure
-1.966 kN/m
-1.966 kN/m
-1.966 kN/m
-1.966 kN/m
Load 1
X
Y
Z
Whole Structure
Member Properties
Total Dead load (DL)
Software licensed to
Job Title
Client
Job No Sheet No Rev
Part
Ref
By Date Chd
File Date/Time
3
02-Mar-14
03-May-2014 15:44 203X103X23.std
Print Time/Date: 04/05/2014 08:47 Print Run 3 of 7
STAAD.Pro V8i (SELECTseries 5) 20.07.10.41
-4.110 kN/m
-4.110 kN/m
-4.110 kN/m
-4.110 kN/m
Load 2
X
Y
Z
Whole Structure
-1.966 kN/m
-4.110 kN/m
-1.966 kN/m
-4.110 kN/m
-1.966 kN/m
-4.110 kN/m
-1.966 kN/m
-4.110 kN/m
Load 3
X
Y
Z
Whole Structure
Total Live Load (LL)
Load combination : DL +LL
Software licensed to
Job Title
Client
Job No Sheet No Rev
Part
Ref
By Date Chd
File Date/Time
4
02-Mar-14
03-May-2014 15:44 203X103X23.std
Print Time/Date: 04/05/2014 08:47 Print Run 4 of 7
STAAD.Pro V8i (SELECTseries 5) 20.07.10.41
-2.752 kN/m
-6.576 kN/m
-2.752 kN/m
-6.576 kN/m
-2.752 kN/m
-6.576 kN/m
-2.752 kN/m
-6.576 kN/m
Load 4
X
Y
Z
Whole Structure
Load combination : 1.4 DL +1.6 LL
Software licensed to
Job Title
Client
Job No Sheet No Rev
Part
Ref
By Date Chd
File Date/Time
5
02-Mar-14
03-May-2014 15:44 203X103X23.std
Print Time/Date: 04/05/2014 08:47 Print Run 5 of 7
STAAD.Pro V8i (SELECTseries 5) 20.07.10.41
Max: 9.453 kNm Max: 9.453 kNm
Max: 9.453 kNm Max: 9.453 kNm
Bending Z Load 4 :
Moment - kNm
X
Y
Z
Whole Structure Mz 20kNm:1m 4 1.4 DL + 1.6 LL
Max Bending Moment
Software licensed to
Job Title
Client
Job No Sheet No Rev
Part
Ref
By Date Chd
File Date/Time
6
02-Mar-14
03-May-2014 15:44 203X103X23.std
Print Time/Date: 04/05/2014 08:47 Print Run 6 of 7
STAAD.Pro V8i (SELECTseries 5) 20.07.10.41
Max: 17.788 kN
Max: -15.654 kN
Max: 15.654 kN
Max: -17.788 kN
Shear Y Load 4 :
Force - kN
X
Y
Z
Whole Structure Fy 35kN:1m 4 1.4 DL + 1.6 LL
Max shear force
Software licensed to
Job Title
Client
Job No Sheet No Rev
Part
Ref
By Date Chd
File Date/Time
7
02-Mar-14
03-May-2014 15:44 203X103X23.std
Print Time/Date: 04/05/2014 08:47 Print Run 7 of 7
STAAD.Pro V8i (SELECTseries 5) 20.07.10.41
Max: 1.243 mm
Max: 0.347 mm
Max: 0.347 mm
Max: 1.243 mm
Displacement Load 4 :
Displacement - mm
X
Y
Z
Whole Structure Displacements 1mm:1m 4 1.4 DL + 1.6 LL
Max Displacement
Sunday, May 04, 2014, 08:29 AM
PAGE NO. 1


****************************************************
* *
* STAAD.Pro V8i SELECTseries4 *
* Version 20.07.09.21 *
* Proprietary Program of *
* Bentley Systems, Inc. *
* Date= MAY 4, 2014 *
* Time= 8:28:41 *
* *
* USER ID: KEOIC *
****************************************************


1. STAAD SPACE
I NPUT FI LE: 203X103X23. STD
2. START J OB I NFORMATI ON
3. ENGI NEER DATE 02- MAR- 14
4. END J OB I NFORMATI ON
5. I NPUT WI DTH 79
6. UNI T METER KN
7. J OI NT COORDI NATES
8. 1 0 0 0; 2 3. 045 0 0; 3 6. 09 0 0; 4 9. 135 0 0; 5 12. 18 0 0
9. MEMBER I NCI DENCES
10. 1 1 2; 2 2 3; 3 3 4; 4 4 5
11. DEFI NE MATERI AL START
12. I SOTROPI C STEEL
13. E 2. 05E+008
14. POI SSON 0. 3
15. DENSI TY 76. 8195
16. ALPHA 1. 2E- 005
17. DAMP 0. 03
18. TYPE STEEL
19. STRENGTH FY 253200 FU 407800 RY 1. 5 RT 1. 2
20. END DEFI NE MATERI AL
21. MEMBER PROPERTY BRI TI SH
22. 1 TO 4 TABLE ST UB203X102X23
23. CONSTANTS
24. MATERI AL STEEL ALL
25. SUPPORTS
26. 1 TO 4 PI NNED
27. 5 FI XED BUT MY MZ
28. DEFI NE MOVI NG LOAD
29. TYPE 1 LOAD 25
30. DI ST 0
31. LOAD 1 LOADTYPE DEAD TI TLE DEAD LOAD
32. SELFWEI GHT Y - 1
33. MEMBER LOAD
34. 1 TO 4 UNI GY - 1. 9657
35. LOAD 2 LOADTYPE NONE TI TLE LI VE LOAD
36. MEMBER LOAD
37. 1 TO 4 UNI GY - 4. 11
38. LOAD COMB 3 DL + LL
Page 1 of 9 C:\A MARS\WAQAR\4th May\203X103X23.anl
ATTACHMENT-2 : STAAD ANALYSIS OF BEAM UB 203X102X23
Sunday, May 04, 2014, 08:29 AM
STAAD SPACE - - PAGE NO. 2
39. 1 1. 0 2 1. 0
40. LOAD COMB 4 1. 4 DL + 1. 6 LL
41. 1 1. 4 2 1. 6
42. PERFORM ANALYSI S PRI NT ALL


P R O B L E M S T A T I S T I C S
-----------------------------------

NUMBER OF JOINTS 5 NUMBER OF MEMBERS 4
NUMBER OF PLATES 0 NUMBER OF SOLIDS 0
NUMBER OF SURFACES 0 NUMBER OF SUPPORTS 5

SOLVER USED IS THE OUT-OF-CORE BASIC SOLVER
ORIGINAL/FINAL BAND-WIDTH= 1/ 1/ 6 DOF
TOTAL PRIMARY LOAD CASES = 2, TOTAL DEGREES OF FREEDOM = 14
SIZE OF STIFFNESS MATRIX = 1 DOUBLE KILO-WORDS
REQRD/AVAIL. DISK SPACE = 12.0/ 122035.2 MB

Page 2 of 9 C:\A MARS\WAQAR\4th May\203X103X23.anl
Sunday, May 04, 2014, 08:29 AM
STAAD SPACE - - PAGE NO. 3


LOADI NG 1 LOADTYPE DEAD TI TLE DEAD LOAD
- - - - - - - - - - -

SELFWEI GHT Y - 1. 000

ACTUAL WEI GHT OF THE STRUCTURE = 2. 751 KN


MEMBER LOAD - UNI T KN METE

MEMBER UDL L1 L2 CON L LI N1 LI N2

1 - 1. 9657 GY 0. 00 3. 04
2 - 1. 9657 GY 0. 00 3. 04
3 - 1. 9657 GY 0. 00 3. 04
4 - 1. 9657 GY 0. 00 3. 05


LOADI NG 2 LOADTYPE NONE TI TLE LI VE LOAD
- - - - - - - - - - -


MEMBER LOAD - UNI T KN METE

MEMBER UDL L1 L2 CON L LI N1 LI N2

1 - 4. 1100 GY 0. 00 3. 04
2 - 4. 1100 GY 0. 00 3. 04
3 - 4. 1100 GY 0. 00 3. 04
4 - 4. 1100 GY 0. 00 3. 05


FOR LOADI NG - 1
APPLI ED J OI NT EQUI VALENT LOADS
J OI NT FORCE- X FORCE- Y FORCE- Z MOM- X MOM- Y MOM- Z
1 0. 00000E+00- 3. 33663E+00 0. 00000E+00 0. 00000E+00 0. 00000E+00- 1. 69334E+00
2 0. 00000E+00- 6. 67327E+00 0. 00000E+00 0. 00000E+00 0. 00000E+00 1. 07751E- 07
3 0. 00000E+00- 6. 67327E+00 0. 00000E+00 0. 00000E+00 0. 00000E+00 2. 15501E- 07
4 0. 00000E+00- 6. 67327E+00 0. 00000E+00 0. 00000E+00 0. 00000E+00- 4. 31003E- 07
5 0. 00000E+00- 3. 33663E+00 0. 00000E+00 0. 00000E+00 0. 00000E+00 1. 69334E+00

STATI C LOAD/ REACTI ON/ EQUI LI BRI UM SUMMARY FOR CASE NO. 1
LOADTYPE DEAD TI TLE DEAD LOAD


CENTER OF FORCE BASED ON Y FORCES ONLY ( METE) .
( FORCES I N NON- GLOBAL DI RECTI ONS WI LL I NVALI DATE RESULTS)

X = 0. 608999991E+01
Y = 0. 000000000E+00
Z = 0. 000000000E+00
Page 3 of 9 C:\A MARS\WAQAR\4th May\203X103X23.anl
Sunday, May 04, 2014, 08:29 AM
STAAD SPACE - - PAGE NO. 4

***TOTAL APPLI ED LOAD ( KN METE ) SUMMARY ( LOADI NG 1 )
SUMMATI ON FORCE- X = 0. 00
SUMMATI ON FORCE- Y = - 26. 69
SUMMATI ON FORCE- Z = 0. 00

SUMMATI ON OF MOMENTS AROUND THE ORI GI N-
MX= 0. 00 MY= 0. 00 MZ= - 162. 56


***TOTAL REACTI ON LOAD( KN METE ) SUMMARY ( LOADI NG 1 )
SUMMATI ON FORCE- X = 0. 00
SUMMATI ON FORCE- Y = 26. 69
SUMMATI ON FORCE- Z = 0. 00

SUMMATI ON OF MOMENTS AROUND THE ORI GI N-
MX= 0. 00 MY= 0. 00 MZ= 162. 56


MAXI MUM DI SPLACEMENTS ( CM / RADI ANS) ( LOADI NG 1)
MAXI MUMS AT NODE
X = 0. 00000E+00 0
Y = 0. 00000E+00 0
Z = 0. 00000E+00 0
RX= 0. 00000E+00 0
RY= 0. 00000E+00 0
RZ= 3. 53784E- 04 5



EXTERNAL AND I NTERNAL J OI NT LOAD SUMMARY ( KN METE ) -

J T EXT FX/ EXT FY/ EXT FZ/ EXT MX/ EXT MY/ EXT MZ/
I NT FX I NT FY I NT FZ I NT MX I NT MY I NT MZ

SUPPORT=1
1 0. 00 - 3. 34 0. 00 0. 00 0. 00 - 1. 69
0. 00 0. 71 0. 00 0. 00 0. 00 1. 69 111000

2 0. 00 - 6. 67 0. 00 0. 00 0. 00 0. 00
0. 00 - 0. 93 0. 00 0. 00 0. 00 0. 00 111000

3 0. 00 - 6. 67 0. 00 0. 00 0. 00 0. 00
0. 00 0. 44 0. 00 0. 00 0. 00 0. 00 111000

4 0. 00 - 6. 67 0. 00 0. 00 0. 00 0. 00
0. 00 - 0. 93 0. 00 0. 00 0. 00 0. 00 111000

5 0. 00 - 3. 34 0. 00 0. 00 0. 00 1. 69
0. 00 0. 71 0. 00 0. 00 0. 00 - 1. 69 111100

FOR LOADI NG - 2
APPLI ED J OI NT EQUI VALENT LOADS
J OI NT FORCE- X FORCE- Y FORCE- Z MOM- X MOM- Y MOM- Z
1 0. 00000E+00- 6. 25748E+00 0. 00000E+00 0. 00000E+00 0. 00000E+00- 3. 17567E+00
2 0. 00000E+00- 1. 25150E+01 0. 00000E+00 0. 00000E+00 0. 00000E+00 0. 00000E+00
3 0. 00000E+00- 1. 25149E+01 0. 00000E+00 0. 00000E+00 0. 00000E+00 4. 31003E- 07
4 0. 00000E+00- 1. 25150E+01 0. 00000E+00 0. 00000E+00 0. 00000E+00- 8. 62006E- 07
5 0. 00000E+00- 6. 25748E+00 0. 00000E+00 0. 00000E+00 0. 00000E+00 3. 17567E+00

STATI C LOAD/ REACTI ON/ EQUI LI BRI UM SUMMARY FOR CASE NO. 2
LOADTYPE NONE TI TLE LI VE LOAD

Page 4 of 9 C:\A MARS\WAQAR\4th May\203X103X23.anl
Sunday, May 04, 2014, 08:29 AM
STAAD SPACE - - PAGE NO. 5

CENTER OF FORCE BASED ON Y FORCES ONLY ( METE) .
( FORCES I N NON- GLOBAL DI RECTI ONS WI LL I NVALI DATE RESULTS)

X = 0. 608999986E+01
Y = 0. 000000000E+00
Z = 0. 000000000E+00

***TOTAL APPLI ED LOAD ( KN METE ) SUMMARY ( LOADI NG 2 )
SUMMATI ON FORCE- X = 0. 00
SUMMATI ON FORCE- Y = - 50. 06
SUMMATI ON FORCE- Z = 0. 00

SUMMATI ON OF MOMENTS AROUND THE ORI GI N-
MX= 0. 00 MY= 0. 00 MZ= - 304. 86


***TOTAL REACTI ON LOAD( KN METE ) SUMMARY ( LOADI NG 2 )
SUMMATI ON FORCE- X = 0. 00
SUMMATI ON FORCE- Y = 50. 06
SUMMATI ON FORCE- Z = 0. 00

SUMMATI ON OF MOMENTS AROUND THE ORI GI N-
MX= 0. 00 MY= 0. 00 MZ= 304. 86


MAXI MUM DI SPLACEMENTS ( CM / RADI ANS) ( LOADI NG 2)
MAXI MUMS AT NODE
X = 0. 00000E+00 0
Y = 0. 00000E+00 0
Z = 0. 00000E+00 0
RX= 0. 00000E+00 0
RY= 0. 00000E+00 0
RZ= 6. 63482E- 04 5



EXTERNAL AND I NTERNAL J OI NT LOAD SUMMARY ( KN METE ) -

J T EXT FX/ EXT FY/ EXT FZ/ EXT MX/ EXT MY/ EXT MZ/
I NT FX I NT FY I NT FZ I NT MX I NT MY I NT MZ

SUPPORT=1
1 0. 00 - 6. 26 0. 00 0. 00 0. 00 - 3. 18
0. 00 1. 32 0. 00 0. 00 0. 00 3. 18 111000

2 0. 00 - 12. 51 0. 00 0. 00 0. 00 0. 00
0. 00 - 1. 74 0. 00 0. 00 0. 00 0. 00 111000

3 0. 00 - 12. 51 0. 00 0. 00 0. 00 0. 00
0. 00 0. 83 0. 00 0. 00 0. 00 0. 00 111000

4 0. 00 - 12. 51 0. 00 0. 00 0. 00 0. 00
0. 00 - 1. 74 0. 00 0. 00 0. 00 0. 00 111000

5 0. 00 - 6. 26 0. 00 0. 00 0. 00 3. 18
0. 00 1. 32 0. 00 0. 00 0. 00 - 3. 18 111100


LOAD COMBI NATI ON NO. 3
DL + LL
Page 5 of 9 C:\A MARS\WAQAR\4th May\203X103X23.anl
Sunday, May 04, 2014, 08:29 AM
STAAD SPACE - - PAGE NO. 6

LOADI NG- 1. 2.
FACTOR - 1. 00 1. 00

LOAD COMBI NATI ON NO. 4
1. 4 DL + 1. 6 LL

LOADI NG- 1. 2.
FACTOR - 1. 40 1. 60


************ END OF DATA FROM I NTERNAL STORAGE ************


43. PARAMETER 1
44. CODE BS5950
45. DFF 200 ALL
46. TRACK 4 ALL
47. CHECK CODE ALL


STAAD. Pr o CODE CHECKI NG - ( BSI )
***********************
PROGRAM CODE REVI SI ON V2. 13_5950- 1_2000
Page 6 of 9 C:\A MARS\WAQAR\4th May\203X103X23.anl
Sunday, May 04, 2014, 08:29 AM
STAAD SPACE - - PAGE NO. 7
CLAUSE BS-2.5.1 CHECKS
LENGTH UNITS - METE
MEMBER TABLE RESULT ACTUAL DEFL. DEFL.LEN/ LOAD/
DEFL. LIMIT DFF LOCATION
=======================================================================
1 ST UB203X102X23 PASS 0. 001 0. 015 3. 045 4
200. 000 1. 27
2 ST UB203X102X23 PASS 0. 000 0. 015 3. 045 4
200. 000 1. 52
3 ST UB203X102X23 PASS 0. 000 0. 015 3. 045 4
200. 000 1. 52
4 ST UB203X102X23 PASS 0. 001 0. 015 3. 045 4
200. 000 1. 78


************** END OF TABULATED RESULT OF DESI GN **************


48. FI NI SH


*********** END OF THE STAAD. Pr o RUN ***********

**** DATE= MAY 4, 2014 TI ME= 8: 28: 42 ****

Page 7 of 9 C:\A MARS\WAQAR\4th May\203X103X23.anl
Sunday, May 04, 2014, 08:29 AM
STAAD SPACE - - PAGE NO. 8
************************************************************
* For quest i ons on STAAD. Pr o, pl ease cont act *
* Bent l ey Syst ems or Par t ner of f i ces *
* *
* Tel ephone Web / Emai l *
* USA +1 ( 714) 974- 2500 *
* UK +44 ( 0) 808 101 9246 *
* SI NGAPORE +65 6225- 6158 *
* FRANCE +33 ( 0) 1 55238400 *
* GERMANY +49 0931 40468 *
* I NDI A +91 ( 033) 4006- 2021 *
* J APAN +81 ( 03) 5952- 6500 ht t p: / / www. ct c- g. co. j p *
* CHI NA +86 21 6288 4040 *
* THAI LAND +66 ( 0) 2645- 1018/ 19 par t ha. p@r ei sof t war et h. com*
* *
* Wor l dwi de ht t p: / / sel ect ser vi ces. bent l ey. com/ en- US/ *
* *
************************************************************
Page 8 of 9 C:\A MARS\WAQAR\4th May\203X103X23.anl
Sunday, May 04, 2014, 08:29 AM
STAAD SPACE - - PAGE NO. 9
Page 9 of 9 C:\A MARS\WAQAR\4th May\203X103X23.anl
Associated Technical Services Co. W. L. L. 2014

Skylight steel framing support Page 20

Beam Deflection (UB203x102x23)
The steel beam deflection was designed not to exceed the allowable limit specified
by the code, span/180. The deflection shall be checked considering the deal weight
of the member and DL + LL.


Maximum Deflection (Roof Panel) = 0.310mm<L/180 = 3045/180 = 16.92 mm,
Therefore OK!



Maximum Deflection (DL + LL) = 1.146<L/200 = 3045/200 = 15.23 mm, Therefore OK!






Associated Technical Services Co. W. L. L. 2014

Skylight steel framing support Page 21


4.4 Design Summary
Element Size
Skylight support steel beam UB 356x171x57
Skylight support steel beam UB203x102x23