SAP FINANCIALS ENTERPRISE STRUCTURE Interview Qs with As Q.

Q.What is a Company Code and what are the basic organizational assignments to a company code? Ans: Company Code is a legal entity for which financial statements like Profit and Loss and Balance Sheets are generated. Plants are assigned to the company code, Purchasing organization is assigned to the company code, and Sales organization is assigned to the company code. Q.What is the relation between a Controlling Area and a Company code? Ans: A Controlling area can have the following 2 type of relationship with a Company code a. Single Company code relation b. Cross Company code relation this means that one single controlling area can be assigned to several different company codes. Controlling can have a one is to one relationship or a one is to many relationship with different company codes. Controlling Area is the umbrella under which all controlling activities of Cost Center Accounting, Product Costing, Profit Center and Profitability Analysis are stored. In a similar way Company Codes is the umbrella for Finance activities. Q.How many Chart of Accounts can a Company code have? Ans: A single Company code can have only one Chart of Account assigned to it. The Chart of Accounts is nothing but the list of General Ledger Accounts. Q.What are the options in SAP when it comes to Fiscal years? Ans: Fiscal year is nothing but the way financial data is stored in the system.SAP provides you with the combination of 12 normal periods and also four special periods. These periods are stored in what is called the fiscal year variant. There are two types of Fiscal Year Variant Calendar Year e.g. Jan-Dec Year Dependent Fiscal Year . Q.What is a year dependent fiscal year variant ? Ans:In a year dependent fiscal year variant the number of days in a month are not as per the calendar month. Let us take an example:- For the year 2005 the period January ends on 29th, Feb ends on 27th, March ends on 29. For the year 2006 January ends on 30th, Feb ends on 26th, March ends on 30th. This is applicable to many countries especially USA. Ever year this fiscal year variant needs to be configured in such a case Q.How does posting happen in MM (Materials Management) during special periods? Ans: There is no posting which happens from MM in special periods. Special periods are only applicable for the FI module. They are required for making any additional posting such as closing entries, provisions. Which happen during quarter end or year end. Q.How many currencies can be configured for a company code? Ans: A company code can have 3 currencies in total. They are local currency (ie company code currency) and 2 parallel currencies. This gives the company the flexibility to report in the different currencies. Q.Do you require to configure additional ledger for parallel currencies? Ans: Where only 2 currencies are configured (Company code currency and a parallel currency) there is no need for an additional ledger. In case the third parallel currency is also configured and if it is different

than the second currency type, you would then need to configure additional ledger. Q.If there are two company codes with different chart of accounts how can you consolidate their activities? Ans. In this case you either need to write an ABAP program or you need to implement the Special Consolidation Module of SAP. If both the company codes use the same chart of accounts then standard SAP reports give you the consolidated figure.

SAP FINANCIALS GENERAL LEDGER Interview Qs with As Q.Give some examples of GL accounts that should be posted automatically through the system and how is this defined in the system. Ans: Stock and Consumption accounts are instances of GL accounts that should be automatically posted . In the GL account master record, a check box exists wherein the automatic posting option is selected called Post Automatically Only Q.What is a Account group and where is it used? Ans: An Account group controls the data that needs to be entered at the time of creation of a master record. Account groups exist for the definition of a GL account, Vendor and Customer master. It basically controls the fields which pop up during master data creation in SAP. Q.What is a field status group? Ans: Field status groups control the fields which come up when the user does the transactions. There are three options for field selection. They are: Display only Suppressed Mandatory So basically you can have any field either for display only or you can totally suppress it or make it mandatory. The field status group is stored in the FI GL Master Record. Q.What is the purpose of a Document type in SAP? Ans: A Document type is specified at the Header level during transaction entry and serves the following purposes: It defines the Number range for documents It controls the type of accounts that can be posted to eg Assets, Vendor, Customer, Normal GL account Document type to be used for reversal of entries Whether it can be used only for Batch input sessions Document Type is created for differentiating business transactions. Eg Vendor Invoice, Credit Memo, Accrual Entries, Customer Invoice. It is a two digit character. Q.What is a Financial Statement Version? Ans: A FSV (Financial Statement Version) is a reporting tool and can be used to depict the manner in which the financial accounts like Profit and Loss Account and Balance Sheet needs to be extracted from SAP. It is freely definable and multiple FSV's can be defined for generating the output for various external agencies like Banks and other Statutory authorities.

Q.How are input and output taxes taken care of in SAP? Ans: A tax procedure is defined for each country and tax codes are defined within this. There is flexibility to either expense out the Tax amounts or Capitalize the same to Stocks. Q.What are Validations and Substitutions? Ans:Validations/Substitutions in SAP are defined for each functional area e.g. FI-GL, Assets, Controlling etc at the following levels 1. Document level 2. Line item level These need to be specifically activated and setting them up are complex and done only when it is really needed. Often help of the technical team is taken to do that. Q.Is it possible to maintain plant wise different GL codes? Ans: Yes. To be able to do so the valuation group code should be activated. The valuation grouping code is maintained per plant and is configured in the MM module. Account codes should be maintained per valuation grouping code after doing this configuration. Q.Is Business area at company code Level? Ans: No. Business area is at client level. What this means is that other company codes can also post to the same business area. Q.What are the different scenarios under which a Business Area or a Profit Center may be defined? Ans: This question is usually very disputable. But both Business Areas and Profit centers are created for internal reporting. Each has its own pros and cons but many companies nowadays go for Profit center as there is a feeling that business area enhancements would not be supported by SAP in future versions.There are typical month end procedures which need to be executed for both of them and many times reconciliation might become a big issue. A typical challenge in both of them is in cases where you do not know the Business Area or Profit Center of the transaction at the time of posting. Q.What are the problems faced when a Business area is configured? Ans: The problem of splitting of account balance is more pertinent in case of tax accounts. Q.Is it possible to default certain values for particular fields? For e.g.company code. Ans: Yes it is possible to default values for certain fields where a parameter id is present. Step 1 Go to the input field to which you want to make defaults. Step 2 Press F1, then click technical info push button. This would open a window that displays the corresponding parameter id (if one has been allocated to the field) in the field data section. Step 3 Enter this parameter id using the following path on SAP Easy access screen System User profile Own data. Step 4 Click on parameter tab. Enter the parameter id code and enter the value you want as default. Save the user settings. Q.Which is the default exchange rate type which is picked up for all SAP transactions? Ans: The default exchange rate type picked up for all SAP transactions is M (average rate) Q.Is it possible to configure the system to pick up a different exchange rate type for a particular transaction?

Ans: Yes it is possible. In the document type definition of GL, you need to attach a different exchange rate type. Q.What are the master data pre-requisites for document clearing? Ans: The Gl Account must be managed as an open item management . This checkbox is there in the General Ledger Master Record called Open Item Management. It helps you to manage your accounts in terms of cleared and uncleared items. A typical example would be GR/IR Account in SAP (Goods Received/Invoice Received Account) Q.Explain the importance of the GR/IR clearing account. Ans: GR/IR is an interim account. In the legacy system of a client if the goods are received and the invoice is not received the provision is made for the same. In SAP at the Goods receipt stage the system passes an accounting entry debiting the Inventory and crediting the GR/IR Account .Subsequently when an invoice is recd this GR/IR account is debited and the Vendor account is credited. That way till the time that the invoice is not received the GR/IR is shown as uncleared items. Q.How many numbers of line items in one single entry you can have? Ans: The number of line items in one document you can accommodate is 999 lines. Q. A Finance Document usually has an assignment field. This field automatically gets populated during data entry. Where does it get its value? Ans: This value comes from the Sort key entered in the Gl master record. Q.How do you maintain the number range in Production environment? Do you directly create it in the Production box or do you do it by means of transport? Ans: Number range is to be created in the production client. You can transport it also by way of request but creating in the production client is more advisable. Q.In customizing company code productive means what? What does it denote? Once the company code is live(real time transactions have started) this check box helps prevents deletion of many programs accidentally. This check box is activated just before go live. Q.What is done by GR/IR regrouping program? Ans: The balance in a GR/IR account is basically because of 2 main types of transactions:Goods delivered but invoice not received Here the Goods receipt is made but no invoice has yet been received from the vendor. In such a scenario GR/IR account will have a credit balance. Invoiced received but goods not delivered Here the Invoice is received from the vendor and accounted for, but goods have not been received. In such a scenario GR/IR account will have a debit balance.The GR/IR account would contain the net value of the above two types of transactions. The GR/IR regrouping program analyses the above transactions and regroups them to the correct adjustment account. The balance on account of first transactions will be regrouped to another liability account and the balance on account of second transactions will be regrouped to an asset account. Q.What are the functionalities available in the financial statement version? Ans: In the financial statement version the most important functionality available is the debit credit shift. This is more important in case of Bank overdraft accounts which can have a debit balance or a credit

balance. Thus in case of a debit balance you would require the overdraft account to be shown on the Asset side. In case of credit balance you would require the account to be shown on the Liability side. Q.Is it possible to print the financial statement version on a SAPscript form? Ans: Yes. It is possible to print the financial statement version on a SAPscript form. Q.How do you configure the SAPscript form financial statement version? Ans: It is possible to generate a form from the financial statement version and print the financial statements on a SAPscript form. In the customizing for financial statement version select the FSV you created and choose Goto Generate form One column or Two column form.You can also copy form from the standard system. Q.Is it possible to generate a financial statement form automatically? Ans: Yes. It is possible to generate a form automatically. Q.Is it possible to keep the FI posting period open only for certain GL codes? Ans: Yes. It is possible to keep open the FI posting period only for certain GL codes. Q.How do you keep the FI posting period open only for certain GL codes? Ans: In transaction code OB52 click on new entries and maintain an interval or a single GL code for the account type S with the posting period variant. If the GL codes are not in sequence then you need to maintain further entries for the posting period variant and account type S. Q. Can posting period variant be assigned to more than 1 company code? Ans: Yes. Posting period variant can be assigned to more than one company code. SAP FINANCIALS AR & AP Interview Qs with As Q. At what level are the customer and vendor codes stored in SAP ? Ans. The customer and vendor code are at the client level. That means any company code can use the customer and vendor code by extending the company code view. Q. How are Vendor Invoice payments made? Ans. Vendor payments can be made in the following manner: Manual payments without the use of any output medium like cheques etc. Automatic Payment program through cheques, Wire transfers, DME etc. Q. How do you configure the automatic payment program? Ans. The following are the steps for configuring the automatic payment program:Step 1 Set up the following: Co. code for Payment transaction Define sending and paying company code. Tolerance days for payable Minimum % for cash discount Maximum cash discount Special GL transactions to be paid

Step 2 Set up the following: Paying company code for payment transaction Minimum amount for outgoing payment No exchange rate diff Separate payment for each ref Bill/exch payment Form for payment advice Step 3 Set up the following: Payment method per country Whether Outgoing payment Check or bank transfer or B/E Whether allowed for personnel payment Required master data Doc types Payment medium programs Currencies allowed Step 4 Set up the following: Payment method per company code for payment transactions Set up per payment method and co. code The minimum and maximum amount. Whether payment per due day Bank optimization by bank group or by postal code or no optimization Whether Foreign currency allowed Customer/Vendor bank abroad allowed Attach the payment form check Whether payment advice required Step 5 Set up the following: Bank Determination for Payment Transactions Rank the house banks as per the following Payment method, currency and give them ranking nos Set up house bank sub account (GL code) Available amounts for each bank House bank, account id, currency, available amount Value date specification Q. Where do you attach the check payment form? Ans. It is attached to the payment method per company code. Q. Where are Payment terms for customer master maintained? Ans. Payment terms for customer master can be maintained at two places i.e. in the accounting view and the sales view of the vendor master record.

Q. Which is the payment term which actually gets defaulted when the transaction is posted for the customer (accounting view or the sales view)? Ans. The payment term in the accounting view of the customer master comes into picture if the transaction originates from the FI module. If an FI invoice is posted (FB70) to the customer, then the payment terms is defaulted from the accounting view of the customer master. The payment term in the sales view of the customer master comes into picture if the transaction originates from the SD module. A sales order is created in the SD module. The payment terms are defaulted in the sales order from the sales view of the customer master. Q. Where are Payment terms for vendor master maintained? Ans. Payment terms for Vendor master can be maintained at two places i.e. in the accounting view and the purchasing view. Q. Which is the payment term which actually gets defaulted in transaction (accounting view or purchasing view)? Ans. The payment term in the accounting view of the vendor master comes into picture if the transaction originates from the FI module. If an FI invoice is posted (FB60) to the Vendor, then the payment terms is defaulted from the accounting view of the vendor master. The payment term in the purchasing view of the vendor master comes into picture if the transaction originates from the MM module. A purchase order is created in the MM module. The payment terms are defaulted in the purchase order from the purchasing view of the vendor master. Q. Explain the entire process of Invoice verification from GR to Invoice verification in SAP with accounting entries? Ans. These are the following steps: A goods receipt in SAP for a purchased material is prepared referring a purchase order. When the goods receipt is posted in SAP the accounting entry passed is:Inventory account Debit GR/IR account credit A GR/IR (which is Goods receipt/Invoice receipt) is a provision account which provides for the liability for the purchase. The rates for the valuation of the material are picked up from the purchase order. When the invoice is booked in the system through Logistics invoice verification the entry passed is as follows:GR/IR account debit Vendor credit Q. How are Tolerances for Invoice verification defined? Ans. The following are instances of tolerances that can be defined for Logistic Invoice Verification. c. Small Differences d. Moving Average Price variances e. Quantity variances f. Price variances Based on the client requirement, the transaction can be Blocked or Posted with a Warning in the event of the Tolerances being exceeded. Tolerances are nothing but the differences

between invoice amount and payment amount or differences between goods receipt amount and invoice amount which is acceptable to the client. Q. Can we change the reconciliation account in the vendor master? Ans. Yes. Reconciliation account can be changed in the vendor master provided that the authority to change has been configured. Normally we should not change the reconciliation account. Q. What is the impact on the old balance when the reconciliation account in the vendor master is changed? Ans. Any change you make to the reconciliation account is prospective and not retrospective. The old items and balances do not reflect the new account only the new transactions reflect the account. Q. There is an advance given by the customer which lies in a special GL account indicator A. Will this advance amount be considered for credit check? Ans. It depends on the configuration setting in the special GL indicator A. If the Relevant to credit limit indicator is switched on in the Special GL indicator A the advances will be relevant for credit check, otherwise it will not be relevant. Q. In payment term configuration what are the options available for setting a default baseline date? Ans. There are 4 options available:1) No default 2) Posting date 3) Document date 4) Entry date Q. What is generally configured in the payment term as a default for baseline date? Ans. Generally document date is configured in the payment term as a default for base line date. Q. How do you configure a special GL indicator for Customer? Ans. You can use an existing special GL indicator ID or create a new one. After creating a special GL indicator id, update the chart of accounts and the Reconciliation account. Also as a last step you need to update the special GL code. The special GL code should also be marked as a Reconciliation account. Switch on the relevant for credit limit and commitment warning indicators in the master record.

SAP FI Bank Accounting Interview Qs and As How is Bank Reconciliation handled in SAP? The bank reco typically follows the below procedure:

First, the payment made to a Vendor is posted to an interim bank clearing account. Subsequently, while performing reconciliation, an entry is posted to the Main Bank account. You can do bank reconciliation either manually or electronically. How do you configure check deposit? The following are the steps for configuring check deposit:Step1: Create account symbols for the main bank and incoming check account. Step2: Assign accounts to account symbols Step3: Create keys for posting rules Step4: Define posting rules Step5: Create business transactions and assign posting rule Step6: Define variant for check deposit What is the clearing basis for check deposit? In the variant for check deposit we need to set up the following a) fields document number ( which is the invoice number), b) amount c) Short description of the customer. The document number and the invoice amount acts as the clearing basis. How do you configure manual bank statement? The following are the steps for configuring manual bank statement:Step1: Create account symbols for the main bank and the sub accounts Step2: Assign accounts to account symbols Step3: Create keys for posting rules Step4: Define posting rules Step5: Create business transaction and assign posting rule Step6: Define variant for Manual Bank statement How do you configure Electronic bank statement? The steps for Electronic Bank Statement are the same except for couple of more additional steps which you will see down below Step1: Create account symbols for the main bank and the sub accounts Step2: Assign accounts to account symbols Step3: Create keys for posting rules Step4: Define posting rules Step5: Create transaction type Step6: Assign external transaction type to posting rules Step7: Assign Bank accounts to Transaction types

SAP FI ASSET ACCOUNTING Interview Qs and As

What are the organizational assignments in asset accounting? Chart of depreciation is the highest node in Asset Accounting and this is assigned to the company code. Under the Chart of depreciation all the depreciation calculations are stored. How do you go about configuring Asset accounting? The configuration steps in brief are as follows:a) Copy a reference chart of depreciation areas b) Assign Input Tax indicator for non taxable acquisitions c) Assign chart of depreciation area to company code d) Specify account determination e) Define number range interval f) Define asset classes g) Define depreciation areas posting to general ledger h) Define depreciation key Explain the importance of asset classes. Give examples? The asset class is the main criterion for classifying assets. Every asset must be assigned to only one asset class. Examples of asset class are Plant& Machinery, Furniture & Fixtures, Computers etc. The asset class also contains the Gl accounts which are debited when any asset is procured. It also contains the gl accounts for depreciation calculation, scrapping etc. Whenever you create an asset master you need to mention the asset class for which you are creating the required asset. In this manner whenever any asset transaction happens the gl accounts attached to the asset class is automatically picked up and the entry passed. You can also specify certain control parameters and default values for depreciation calculation and other master data in each asset class. How are depreciation keys defined? The specifications and parameters that the system requires to calculate depreciation amounts are entered in Calculation methods. Calculation methods replace the internal calculation key of the depreciation key. Depreciation keys are defaulted in Asset Master from the asset class . Refer to the configuration for more details of how depreciation is calculated. A company has its books prepared based on Jan Dec calendar year for reporting to its parent company. It is also required to report accounts to tax authorities based on AprilMarch. Can assets be managed in another depreciation area based on a different fiscal year variant? No. Assets accounting module cannot manage differing fiscal year variant which has a different start date (January for book depreciation and April for tax depreciation) and different end date (December for book depreciation and March for tax depreciation). In this case you need to implement the special purpose ledger. What are the special steps and care to be taken in Fixed asset data migration into SAP system especially when Profit center accounting is active?

Data migration is slightly different from a normal transaction which happens in Asset accounting module. Normally, in asset accounting the day to day transactions is posted with values through FI bookings and at the same time the asset reconciliation is updated online realtime. Whereas In data Migration the asset master is updated with values through a transaction code called as AS91. The values updated on the master are Opening Gross value and the accumulated depreciation. The reconciliation GL account is not automatically updated at this point of time. The reconciliation accounts (GL codes) are updated manually through another transaction code called as OASV. If profit center is active, then after uploading assets through AS91 you should transfer the asset balances to profit center accounting through a program. Thereafter you remove the Asset GL code (reconciliation accounts) from the 3KEH table for PCA and update the Asset reconciliation account (GL code) through OASV. After this step you again update the Asset reconciliation account in the 3KEH table. The reason you remove the Asset reconciliation code from 3KEH table is that double posting will happen to PCA when you update the Asset reconciliation manually. Is it possible to calculate multiple shift depreciation? Is any special configuration required? Yes it is possible to calculate multiple shift depreciation in SAP for all types of depreciation except unit of production. No special configuration is required. How do you maintain multiple shift depreciation in asset master? The following steps are needed to maintain multiple shift depreciation: 1. The variable depreciation portion as a percentage rate is to be maintained in the detail screen of the depreciation area. 2. The multiple shift factor is to be maintained in the time dependent data in the asset master record. This shift factor is multiplied by the variable portion of ordinary depreciation. Once you have done the above the SAP system calculates the total depreciation amount as follows:- Depreciation amount = Fixed depreciation + (variable depreciation * shift factor) Lets say you have changed the depreciation rates in one of the depreciation keys due to changes in legal requirements. Does system automatically calculate the planned depreciation as per the new rate? No. System does not automatically calculate the planned depreciation after the change is made. You need to run a program for recalculation of planned depreciation. What are evaluation groups? The evaluation groups are an option for classifying assets for reports or user defined match code (search code). You can configure 5 different evaluation groups. You can update these evaluation groups on to the asset master record. What are group assets? The tax requirements in some countries require calculation of depreciation at a higher group or level of assets. For this purpose you can group assets together into so-called group assets.

What are the steps to be taken into account during a depreciation run to ensure that the integration with the general ledger works smoothly? For each depreciation area and company code, specify the following: 1 The frequency of posting depreciation(monthly,quarterly etc) 2 CO account assignment (cost center) 3 For each company code you must define a document type for automatic depreciation posting: This document type requires its own external number range. 4 You also need to specify the accounts for posting. (Account determination) Finally to ensure consistency between Asset Accounting and Financial Accounting, you must process the batch input session created by the posting report. If you fail to process the batch input session, an error message will appear at the next posting run. The depreciation calculation is a month end process which is run in batches and then once the batch input is run the system posts the accounting entries into Finance. How do you change fiscal year in Asset Accounting? Run The fiscal year change program which would open new annual value fields for each asset. i e next year The earliest you can start this program is in the last posting period of the current year. You have to run the fiscal year change program for your whole company code. You can only process a fiscal year change in a subsequent year if the previous year has already been closed for business. Take care not to confuse the fiscal year change program with year-end closing for accounting purposes. This fiscal year change is needed only in Asset Accounting for various technical reasons. Is it possible to have depreciation calculated to the day? Yes it is possible. You need to switch on the indicator Dep to the day in the depreciation key configuration. Is it possible to ensure that no capitalization be posted in the subsequent years? Yes it is possible. You need to set it in the depreciation key configuration. How are Capital Work in Progress and Assets accounted for in SAP? Capital WIP is referred to as Assets under Construction in SAP and are represented by a specific Asset class. Usually depreciation is not charged on Capital WIP. All costs incurred on building a capital asset can be booked to an Internal Order and through the settlement procedure can be posted onto an Asset Under Construction. Subsequently on the actual readiness of the asset for commercial production, the Asset Under Construction gets capitalized to an actual asset. The company has procured 10 cars. You want to create asset masters for each of this car. How do you create 10 asset masters at the same time? While creating asset master there is a field on the initial create screen called as number of similar assets. Update this field with 10. When you finally save this asset master you will get a pop up asking whether you want to maintain different texts for these assets. You can update different details for all the 10 cars.

SAP FI MM SD INTEGRATION

How do you go about setting the FI MM account determination ? FI MM settings are maintained in transaction code OBYC. Within these there are various transaction keys to be maintained like BSX, WRX, GBB, PRD etc. In each of these transaction keys you specify the GL accounts which gets automatically passed at the time of entry. Few examples could be: BSX- Stands for Inventory Posting Debit GBB-Stands for Goods Issue/Scrapping/delivery of goods etc PRD- Stands for Price Differences. At what level is the FI-MM, FI-SD account determination settings? They are at the chart of accounts level. What are the additional settings required while maintaining or creating the GL codes for Inventory accounts? In the Inventory GL accounts (Balance sheet) you should switch on the Post automatically only tick. It is also advisable to maintain the aforesaid setting for all FI-MM accounts and FISD accounts. This helps in preserving the sanctity of those accounts and prevents from having any difference between FI and MM, FI and SD. What is Valuation and Account assignment in SAP? This is actually the link between Materials Management and Finance. The valuation in SAP can be at the plant level or the company code level. If you define valuation at the plant level then you can have different prices for the same material in the various plants. If you keep it at the company code level you can have only price across all plants. Valuation also involves the Price Control .Each material is assigned to a material type in Materials Management and every material is valuated either in Moving Average Price or Standard Price in SAP. These are the two types of price control available. What is Valuation Class? The Valuation Class in the Accounting 1 View in Material Master is the main link between Material Master and Finance. This Valuation Class along with the combination of the transaction keys (BSX,WRX,GBB,PRD ) defined above determine the GL account during posting. We can group together different materials with similar properties by valuation class. Eg Raw material,Finsihed Goods, Semi Finished We can define the following assignments in customizing : All materials with same material type are assigned to just one valuation class. Different materials with the same material type can be assigned to different valuation classes. Materials with different material types are assigned to a single valuation class. Can we change the valuation class in the material master once it is assigned? Once a material is assigned to a valuation class in the material master record, we can change it only if the stocks for that material are nil. If the stock exists for that material, then we cannot change the valuation class. In such a case, if the stock exists, we have to transfer the stocks or issue the stocks and make the stock nil for the specific valuation class. Then only we will be able to change the valuation class.

Does the moving average price change in the material master during issue of the stock assuming that the price control for the material is Moving Average? The moving average price in the case of goods issue remains unchanged. Goods issue are always valuated at the current moving average price. It is only in goods receipt that the moving average price might change. A goods issue only reduces the total quantity and the total value in relation to the price and the moving price remains unchanged. Also read the next question to learn more about this topic. If the answer to the above question is Yes, then list the scenario in which the moving average price of the material in the material master changes when the goods are issued. The moving average price in the material master changes in the scenario of Split Valuation which is sometimes used by many organizations. If the material is subject to split valuation, the material is managed as Several partial stocks and each partial stock is valuated separately. In split valuation, the material with valuation header record will have v moving average price. This is where the individual stocks of a material are managed cumulatively. Here two valuation types are created, one valuation type can have v (MAP) and the other valuation type can have s(standard price). In this case, whenever the goods are issued from the respective valuation types, always the MAP for the valuation header changes. What is the accounting entry in the Financial books of accounts when the goods are received in unrestricted use stock? Also mention the settings to be done in the Automatic postings in SAP for the specific G/L accounts. On receipt of the goods in unrestricted-use stock, the Inventory account is debited and the GR/IR account gets credited. In customization, in the automatic postings, the Inventory G/L account is assigned to the Transaction event key BSX and the GR/IR account is assigned to the Transaction event key WRX. If a material has no material code in SAP, can you default the G/L account in Purchase order or it has to be manually entered?. If a material has no material code in SAP, we can still, default the G/L account with the help of material groups. We can assign the valuation class to a material group and then in FIautomatic posting, we can assign the relevant G/L account in the Transaction event key. The assignment of a valuation class to a material group enables the system to determine different G/L accounts for the individual material groups. What is the procedure in SAP for Initial stock uploading? Mention the accounting entries also. Initial stock uploading in SAP from the legacy system is done with inventory movement type 561( a MM transaction which is performed). Material valuated at standard price: For a material valuated at standard price, the initial entry of inventory data is valuated on the basis of standard price in the material master. If you enter an alternative value at the time of the movement type 561, then the system posts the difference to the price difference account. Material valuated at moving average price: The initial entry of inventory data is valuated as follows : If you enter a value when uploading the initial data, the quantity entered is valuated at this price. If you do not enter a value when entering initial data, then the quantity entered is

valuated at the MAP present in the material master. The accounting entries are: Inventory account is debited and Inventory Historical upload account is credited. How do you configure FI-SD account determination? The FI-SD account determination happens through an access sequence. The system goes about finding accounts from more specific criteria to less specific criteria. This is the sequence it would follow: 1) It will first access and look for the combination of Customer accounts assignment grp/ Material account assignment grp/ Account key. 2) If it does not find the accounts for the first combination it will look for Customer account assignment grp and account key combination. 3) Furthermore, if it does not find accounts for the first 2 criterias then it will look for Material account assignment grp/Account key. 4) If it does not find accounts for the all earlier criterias then finally it will look for Account key and assign the GL code. Thus posting of Sales Invoices into FI are effected on the basis of a combination of Sales organization, Account type, or Customer and Material Account assignment groups and following are the options available. a. Customer AAG/Material AAG/Account type b. Material AAG/Account type c. Customer AAG/Account type For each of this option you can define a Gl account. Thus the system uses this gl account to automatically pass the entries.