Scribd
Upload
65 views1 page

Port Forwarding

By default Hikvision software and devices (IP cameras, DVR, NVR, DVS) requires the following ports to be forwarded. Routers will not allow incoming traffic to the device unless you have configured them to forward the necessary ports to that device.

Uploaded by

Billy Buitrago
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
65 views1 page

Port Forwarding

By default Hikvision software and devices (IP cameras, DVR, NVR, DVS) requires the following ports to be forwarded. Routers will not allow incoming traffic to the device unless you have configured them to forward the necessary ports to that device.

Uploaded by

Billy Buitrago
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

TM

TECHNICAL BULLETIN
1.2 Pages 1

Title: Date: Product: Action Required:

Port Forwarding 9/28/2012 Version: All Hikvision IP devices and Software Information Only

A router is a physical device that allows you to share your internet connection between multiple computers. Most routers will not allow incoming traffic to the device unless you have configured them to forward the necessary ports to that device. By default Hikvision software and devices (IP cameras, DVR, NVR, DVS) requires the following ports to be forwarded. Note: Port Forwarding may reduce the security of the computers on your network! Please contact the network administrator or a qualified network technician for further information. Port: 80 Port: 8000 Port: +200 HTTP protocol Client Software Port Client Software Port +200 Used to connect via the IE browser Used to connect to the video streams Used by IP cameras only To connect to the video streams

For example: If the client port is changed to 9000 then the +200 port will be 9200. Using the default client port 8000 then the +200 port will be 8200. Port: 554 RTSP Port Realtime Streaming Protocol Used for Recording Video Remotely Used by iVMS-4500 mobile app For 3G/4G connection

Port: 1024

RTSP Port for 3G/4G

Note: Recommended RTSP port 1024 should be used when experiencing connection issues over 3G/4G connection. Used only with Hikvision model (-ST series) that support RTSP stream.

Third-party assistance on configuring popular routers can be found at:


http://www.portforward.com/ http://canyouseeme.org/ http://yougetsignal.com

(note: not affiliated nor supported by Hikvision Tech Support Team). Many router manufacturers also offer guides on their websites, with the included documentation, or on the installation CD. Note: On most routers, the brand and model number on or near the serial number sticker on the bottom of the device. If you cannot find any information for your particular router, please contact your router manufacturer or internet service provider for further assistance.

-1Hikvision USA, Inc. 908 Canada Court, Industry, CA 91748 Phone: 909-895-0400 Fax: 909-595-0788 Email: [email protected] Website: http://www.hikvision.com

You might also like