Scribd Logo
Upload

Welcome to Scribd!

  • 87 views

    CS-150-2c3 - Pulled Bend Min THK

    Uploaded by

    Joanna Newton
    This document calculates the minimum pipe wall thickness for a 3D pulled pipe bend using equations from ASME B31.3. The internal design pressure is 0.6 MPa. The outside diameter of the pipe is 219.1 mm. The bend radius is 609.6 mm. The minimum thickness calculated at the intrados is 0.528 mm and 3.528 mm when including the 3 mm corrosion allowance. The minimum thickness calculated at the extrados is 0.440 mm and 3.440 mm including the corrosion allowance. The ordered pipe thickness of 8.18 mm (Schedule 40) is acceptable for this 3D pulled bend.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    CS-150-2c3 - Pulled Bend Min THK

    Uploaded by

    Joanna Newton
    87 views1 page
    This document calculates the minimum pipe wall thickness for a 3D pulled pipe bend using equations from ASME B31.3. The internal design pressure is 0.6 MPa. The outside diameter of the pipe is 219.1 mm. The bend radius is 609.6 mm. The minimum thickness calculated at the intrados is 0.528 mm and 3.528 mm when including the 3 mm corrosion allowance. The minimum thickness calculated at the extrados is 0.440 mm and 3.440 mm including the corrosion allowance. The ordered pipe thickness of 8.18 mm (Schedule 40) is acceptable for this 3D pulled bend.

    Original Description:

    CS-150-2c3 - Pulled Bend Min Thk

    Original Title

    CS-150-2c3 - Pulled Bend Min Thk

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document calculates the minimum pipe wall thickness for a 3D pulled pipe bend using equations from ASME B31.3. The internal design pressure is 0.6 MPa. The outside diameter of the pipe is 219.1 mm. The bend radius is 609.6 mm. The minimum thickness calculated at the intrados is 0.528 mm and 3.528 mm when including the 3 mm corrosion allowance. The minimum thickness calculated at the extrados is 0.440 mm and 3.440 mm including the corrosion allowance. The ordered pipe thickness of 8.18 mm (Schedule 40) is acceptable for this 3D pulled bend.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    87 views1 page

    CS-150-2c3 - Pulled Bend Min THK

    Uploaded by

    Joanna Newton
    This document calculates the minimum pipe wall thickness for a 3D pulled pipe bend using equations from ASME B31.3. The internal design pressure is 0.6 MPa. The outside diameter of the pipe is 219.1 mm. The bend radius is 609.6 mm. The minimum thickness calculated at the intrados is 0.528 mm and 3.528 mm when including the 3 mm corrosion allowance. The minimum thickness calculated at the extrados is 0.440 mm and 3.440 mm including the corrosion allowance. The ordered pipe thickness of 8.18 mm (Schedule 40) is acceptable for this 3D pulled bend.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    Line No.

    200-P-21014-CS-150-2C3-IH-ST
    CA = 3 mm
    tord = 8.18 mm (NPS 8 Sch 40)
    ASME B31.3 - PARA. 304 - Pressure Design of Components
    Eqn. 2
    where: t =Pressure Design Thickness
    c =Sum of mechanical allowances
    Eqn. 3c
    where: P =Internal Design Gauge Pressure = 0.6 MPa
    D =Outside Diameter of Pipe = 219.1 mm
    S =Allowable Basic Stress = 137.9 MPa
    E =Quality Factor = 1
    W =Weld J oint Strength Reduction Factor = 1
    Y =Coefficient from Table 304.1.1 = 0.4
    At intrados of bend (inside bend radius):
    Eqn. 3d = 1.110
    t_m=t+c
    t=P2|(SEwI)+P]
    I=(4(R_1)-1)(4(R
    _1/)2)
    At extrados of bend (outside bend radius):
    Eqn. 3e = 0.924
    where: R1 =Bend Radius of pipe bend = 609.6 mm (3D Pulled Bend)
    Minimum Thickness at Intrados:
    = 0.528 mm
    = 3.528 mm
    Minimum Thickness at Extrados:
    = 0.440 mm
    = 3.440 mm
    Ordered thickness of 8.18mm (sch 40) considered acceptable for 3D pulled bends.
    I=(4(R_1)-1)(4(R
    _1/)2)
    I=(4(R_1)+1)(4(R
    _1/)+2)
    t=P2|(SEwI)+P]
    t=P2|(SEwI)+P]
    t_m=t+c
    t_m=t+c

    You might also like