Scribd
Upload
1K views

API Source Inspector Exam Study Guide

This document lists the standards and sections an inspector needs to be familiar with to pass the API American Petroleum Institute Source Inspector Exam. It includes sections from standards published by API, AWS, ASNT, ASME, SSPC, and others related to inspection of pressure vessels, welding, materials, coatings, and piping. Key areas covered are nondestructive testing, welding and brazing qualifications, materials specifications, coating thickness measurement, and surface preparation standards.

Uploaded by

dhasdj
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
1K views

API Source Inspector Exam Study Guide

This document lists the standards and sections an inspector needs to be familiar with to pass the API American Petroleum Institute Source Inspector Exam. It includes sections from standards published by API, AWS, ASNT, ASME, SSPC, and others related to inspection of pressure vessels, welding, materials, coatings, and piping. Key areas covered are nondestructive testing, welding and brazing qualifications, materials specifications, coating thickness measurement, and surface preparation standards.

Uploaded by

dhasdj
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

API American Petroleum Institute Source Inspector Exam Study Guide

RP572 InspectionofPressureVessels Sections3and4only RP577 WeldingInspectionandMetallurgy RP578 MaterialVerificationProgramforAlloyPipingSystems STD598 ValveInspectionandTesting AWS American Welding Society D1.1StructuralWeldingCode WeldingInspectorHandbook ASNT American Society of Nondestructive Testing SNTTC1APersonalQualificationandCertificationofNondestructiveTestingPersonnel ASME American Society of Mechanical Engineers BoilerandPressureVesselCode(BPVC) Section II Materials,PartA, SectionsSA20,SA370,SA6 Section V NondestructiveExamination: AlldefinitionsinSubsectionA,Article1,Appendix1andSubsectionB,Article30,SE1316. Articles1,4,6,7,9,10,and23(section797only) Section VIII RulesforConstructionofPressureVessels,Div1: AlldefinitionsinAppendix3 SectionsUG415;UG7585;UG90103;UG115120 SectionsUW13;UW5;UW2642;UW4654;UW60 UCS5657 Section IX WeldingandBrazingQualifications,Weldingonly: QW100190;QW200290;QW300380 QW400490;QW500540 B31.3 Code for Process Piping ChaptersI,III,IV,V,VI B16.5 Pipe Flanges and Flanged Fittings Chapters18 SSPC Society for Protective Coatings SSPC PA 2 ProcedureforDeterminingConformancetoDryCoatingThicknessRequirements SSPC Surface Preparation Guide,thefollowingsectionsonly: SSPCSP1 SSPCSP3 SSPCSP5 SSPCSP6 SSPCSP7 SSPCSP10 SSPCSP11

You might also like