Scribd
Upload
589 views4 pages

VisMockup Section Capping

This document describes how to add sections to 3D geometry in order to view the internal structure. It explains how to add a section plane with or without clipping edges, and how to enable capping to make the cut surface appear solid by selecting a capping color and effect level. Examples are provided of sections with and without capping applied.

Uploaded by

abhijitmpatil3852
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
589 views4 pages

VisMockup Section Capping

This document describes how to add sections to 3D geometry in order to view the internal structure. It explains how to add a section plane with or without clipping edges, and how to enable capping to make the cut surface appear solid by selecting a capping color and effect level. Examples are provided of sections with and without capping applied.

Uploaded by

abhijitmpatil3852
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
You are on page 1/ 4

Add normal section to geometry:

Section plane added Without Clipping

Section plane added With Clipping

Page 1

Add Capping Option:

Click on Enable Capping to make the section look solid. Select the Capping Color and Effect level (i.e. Global or Per Part).

Page 2

After added capping:


Section plane added Without CAPPING

Section plane added With CAPPING

Page 3

Examples:

Page 4

You might also like