0% found this document useful (0 votes)
33 views1 page

Air Conditioning Amplifier: On-Vehicle Inspection

This document provides inspection instructions for an air conditioning amplifier on a vehicle. It instructs technicians to inspect the wire harness connectors of the engine and electronic control unit for correct voltage readings in various engine and air conditioning conditions. Technicians are told to check for proper voltage between specific terminals under starts with the magnetic clutch on and off, various evaporator and switch states, and refrigerant pressures. If readings are incorrect, technicians should inspect circuits connected to other parts.

Uploaded by

bmashrequi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
33 views1 page

Air Conditioning Amplifier: On-Vehicle Inspection

This document provides inspection instructions for an air conditioning amplifier on a vehicle. It instructs technicians to inspect the wire harness connectors of the engine and electronic control unit for correct voltage readings in various engine and air conditioning conditions. Technicians are told to check for proper voltage between specific terminals under starts with the magnetic clutch on and off, various evaporator and switch states, and refrigerant pressures. If readings are incorrect, technicians should inspect circuits connected to other parts.

Uploaded by

bmashrequi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

AC-75

AIR CONDITIONING AIR CONDITIONING AMPLIFIER

AIR CONDITIONING AMPLIFIER


AC2K5-01

ON-VEHICLE INSPECTION
1. 2. REMOVE GLOVE COMPARTMENT DOOR INSPECT A/C AMPLIFIER (Engine (and ECT) ECU) CIRCUIT Inspect the wire harness side connector of engine (and ECT) ECU from the back side, as shown in the chart below.
Engine (and ECT) ECU terminals E5 E6 E7 E8

13 12 11 10 9 8 7 6 5 4 3 2 1 8 7 6 5 4 3 2 1 6 5 4 3 2 1 1110 9 8 7 6 5 4 3 2 1 2625 242322 21 2019 18 17 161514 161514 1312 11 10 9 12 11 10 9 8 7 2221 2019 18 17 161514 1312

FI6526

Tester connection E7 3 Ground E7-3 G d

Condition Start engine. Magnetic clutch: ON Start engine. Magnetic clutch: OFF IG ON. Evaporator temp.: 0 C (32 F) IG ON. Evaporator temp.: 15 C (59 F) IG ON. A/C switch: ON IG ON. A/C switch: OFF Refrigerant pressure: 196 - 1,340 kPa Refrigerant pressure: less than 196 or more than 1,340 kPa Below 1.0 V Battery voltage 2.0 - 2.4 V 1.4 - 1.8 V Battery voltage No voltage Battery voltage No voltage

Specified condition

E5 14 E5 E5-14 E5-9 9

E7 10 Ground E7-10 G d E7-7 Ground E7-7 Ground

If the circuit is not as specified, inspect the circuits connected to other parts.

2002 ECHO (RM884U)

Author :

Date :

1522

You might also like