Scribd
Upload
100 views2 pages

Equipment Data Sheet Centrifugal Mag Drive Pump: Amec 1979 Lakeside Parkway Suite 500 Tucker, GA 30084

This document is an equipment data sheet for a centrifugal mag drive pump. It provides key specifications and operating conditions for the pump such as the process liquid being pumped, operating temperatures and pressures, pump performance curves, materials of construction, auxiliary equipment details, weights and dimensions, and testing and inspection requirements. The pump is used to pump an unspecified liquid at temperatures from minimum to maximum within a normal range, and has a multistage centrifugal design driven by a magnetic drive system.

Uploaded by

EDUARDO
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
100 views2 pages

Equipment Data Sheet Centrifugal Mag Drive Pump: Amec 1979 Lakeside Parkway Suite 500 Tucker, GA 30084

This document is an equipment data sheet for a centrifugal mag drive pump. It provides key specifications and operating conditions for the pump such as the process liquid being pumped, operating temperatures and pressures, pump performance curves, materials of construction, auxiliary equipment details, weights and dimensions, and testing and inspection requirements. The pump is used to pump an unspecified liquid at temperatures from minimum to maximum within a normal range, and has a multistage centrifugal design driven by a magnetic drive system.

Uploaded by

EDUARDO
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
You are on page 1/ 2

EQUIPMENT DATA SHEET CENTRIFUGAL MAG DRIVE PUMP

Attachments: AMEC 1979 Lakeside Parkway Suite 500 Tucker, GA 30084 Spec. No.: Project No.: Customer: Compiled by: Date: Equip. No.: Equip. Name: Checked by: Approval: Customer Approval:

P&ID No: PFD No: Issue:

Date:

Released for:

DESCRIPTION Service: Qty. Required: PROCESS DATA LIQUID Name: Pumping Temp., F: Min/Norm/Max S.G. @ F: Vapor Pressure, PSIA: Viscosity cP @ F: Corrosion / Erosion:

Pump Mfg.: Size & Type: No. Stages:

Motor Type: Motor Provided by: Motor Mounted by:

OPERATING CONDITIONS Capacity, US GPM: Norm/Rated Disch. Pressure, PSIG: Suction Pressure, PSIG: Diff. Press., PSI: Diff. Head, ft: NPSH avail., ft: Hyd. Power, HP:

PERFORMANCE (To be completed by manufacturer) Proposal Curve No.: Speed, RPM: Efficiency, %: Rated Power, BHP: CONSTRUCTION NOZZLES Suction Discharge Bal. Drum Drain Vent Pressure Gauge Warm Up Impeller Type Impeller diam (in): Rated/Max/Min: Rot.(viewed from cplq): Max. Pressure PSIG @: 60 Deg. F Pumping Temperature Hydro Test Pressure PSIG: Casing Mounting - Standard SIZE, in. LOCATION RATING, PSIG FACING REMARKS Min. Continuous Flow: Thermal: Stable: Max. Head Rated Imp, ft: Max. Rated Power, BHP: NPSH Required, ft. water: 3% Head Drop: Suction Specific Speed, RPM:

CW/CCW

Material: Barrel/Case Impeller Shaft Wet End Gasket O-Rings Inner Magnet Ring Bushholder Coupling Housing Outer Magnet Ring Alignment Pad Casing Wear Ring Thrust Alignment Shell/Shroud Mat'l

Coupling Type: Manuf. Model

Coupling Guard: Type

Bearings(Type/No): Radial Thrust Lubrication Type: Baseplate Material: Type API 610 Std. No. : PAGE 1 OF 2

FORM NO. F2300039 REV. 01\\ALPHA\STANDARDS\FORMS\EXCEL\UNITSPECS\222153227.xls.ms_office

EQUIPMENT DATA SHEET CENTRIFUGAL MAG DRIVE PUMP


Attachments: AMEC 1979 Lakeside Parkway Suite 500 Tucker, GA 30084 Spec. No.: Project No.: Customer: Compiled by: Date: Equip. No.: Equip. Name: Checked by: Approval: Customer Approval:

P&ID No: PFD No: Issue:

Date:

Released for:

Material AUXILIARY PIPING Cooling Water Plan: Tubing/Pipe: Material: Tube/Pipe Assembly: Sight Flow Indicators Required Cooling Water GPM/PSIG:

MOTOR HP: RPM: Frame: Volts/Phase/Hz: Type: Enclosure: WEIGHTS Weight of Pump, lbs.: Weight of BasePlate, lbs.: Weight of Driver, lbs.: Weight of Gearbox lbs.: Total Weight, lbs.: Manufacturer: Temp. Rise (Deg.F): Full Load AMPS: Locked Rotor AMPS: Insulation: Service Factor: TESTING & INSPECTION Testing: Performance Hydro Other Witnessed Inspection Req. (y /n): REMARKS * Vendor to Specify **Vendor to Verify Noise Level @ 3' dB: Bearings: Lube: Vertical Shaft: Solid/Hollow Vertical Thrust (lbs.) Up/Down: Area Classification: MISC. Painting: Standard Other

FORM NO. F2300039 REV. 01\\ALPHA\STANDARDS\FORMS\EXCEL\UNITSPECS\222153227.xls.ms_office

PAGE 2 OF 2

You might also like