内部公开 Internal Use Only▲

Fiber cascading connection

Scenario-8: Dual band 900M S1-S3, 1800M S4 or 900M

S4 1800M S1-S4, FS board not available for 3G RRU
In this scenario, two R8860E/R8881 were cascaded for GSM 900M&1800M, slot 3, 4, 5 of FS
board is not available for 3G RRU.

Scenario-9: Dual band 900M S1-S4, 1800M S5-S6, FS board

available for 3G.

In this scenario, one R8860E/R8881 was used for 900M; one R8882 was used for 1800M. While
there is no FS port available for 3G RRU, The 3G RRU will be cascaded with R8860E/R8881.

<以上所有信息均为中兴通讯股份有限公司所有，不得外传> 第1页
All Rights reserved, No Spreading abroad without Permission of ZTE
 内部公开 Internal Use Only▲

Scenario-10: Dual band 900M S1-S4, 1800M S7-S10, FS

board available for 3G.

In this scenario, one R8860E/R8881 was used for 900M, one R8860E/R8881 and one R8882 were
used for 1800M, and one R8881 will be used for 3G. The three R8860E/R8881 will be cascaded
by Optical Fiber.

<以上所有信息均为中兴通讯股份有限公司所有，不得外传> 第2页
All Rights reserved, No Spreading abroad without Permission of ZTE
 内部公开 Internal Use Only▲

Cable connection layout

BS8700 with W301 Rectifier cabinet

2G 3G 2G 3G 2G 3G
S1 S1 S2 S2 S3 S3

+45° -45° +45°

+45°-45°
-45° +45° -45° +45° -45° +45° -45° +45° -45°

½ Jumper ½ Jumper ½ Jumper ½ Jumper ½ Jumper ½ Jumper ½ Jumper ½ Jumper ½ Jumper

Tx/Rx Rx ANT1 ANT2 Tx/Rx

Tx/Rx Rx
Rx ANT1 ANT2 Tx/RxANT2
ANT1 Rx ANT1 ANT2
R8860E 3G R8860E 3G R8860E 3G
/R8881 R8881 /R8881 R8881 /R8881 R8881
PGND PGND
PGND PGND PGND PGND
PGND
PWR Mon LC2 LC1 PWR Mon OPT1 PWR Mon LC2 LC1 PWR OPT1 PWR Mon LC2 LC1 PWR OPT1

OUT1 OUT1 OUT1

16mm2
PIMDC PIMDC PIMDC
16mm2
-48V IN -48V IN -48V IN
16mm2

GROUNDING BAR
GROUNDING BAR

Power cable
Power cable
GROUNDING BAR Power cable

Optical fiber

W301
AC input

BPK

ETH0

ETH 0 BBU 0 FE cable

Power cabinet RS232/485 MON IN/OUT LPU SCSI 50

External alarms
ACPD
DCPD4
IDU
FE0
To ODU

RF cable

<以上所有信息均为中兴通讯股份有限公司所有，不得外传> 第3页
All Rights reserved, No Spreading abroad without Permission of ZTE
 内部公开 Internal Use Only▲

8881 cascade to 8860E

3G RRU(R8881) cascade
to 2G RRU(R8860E)

3G 2G
Antenna Antenna

+45° -45°

JUMPER JUMPER

ANT1 ANT2

R8881 R8860E

RX/TX RX

GND

GND

PWR

LC1 LC2 Mon PWR

OPT1
CASCADING FIBER

PIMDC

Grounding cable

Power cable

TO BBU To Rec/ DCPD4 To Grounding Bar

<以上所有信息均为中兴通讯股份有限公司所有，不得外传> 第4页
All Rights reserved, No Spreading abroad without Permission of ZTE
 内部公开 Internal Use Only▲

8881 cascade to 8881

3G RRU(R8881) cascade
to 2G RRU(R8881)

3G 2G
Antenna Antenna

+45° -45°

JUMPER JUMPER

3G 2G
R8881 R8881
ANT1 ANT2

GND
GND

OPT1
CASCADING FIBER
PWR
OPT1 PWR OPT2

Power cable Grounding cable

TO BBU To Rec/ DCPD4 To Grounding Bar

<以上所有信息均为中兴通讯股份有限公司所有，不得外传> 第5页
All Rights reserved, No Spreading abroad without Permission of ZTE