This document is a checklist for waterproofing work being done at the Ramanujan IT City TRIL Info Park project. It outlines the materials, specifications, and checks to be completed at each stage of the waterproofing process, including surface preparation, application of injection grout and waterproofing membranes, curing times, and testing. The checklist ensures all stages of the waterproofing work are properly completed before moving to the next.
This document is a checklist for waterproofing work being done at the Ramanujan IT City TRIL Info Park project. It outlines the materials, specifications, and checks to be completed at each stage of the waterproofing process, including surface preparation, application of injection grout and waterproofing membranes, curing times, and testing. The checklist ensures all stages of the waterproofing work are properly completed before moving to the next.
This document is a checklist for waterproofing work being done at the Ramanujan IT City TRIL Info Park project. It outlines the materials, specifications, and checks to be completed at each stage of the waterproofing process, including surface preparation, application of injection grout and waterproofing membranes, curing times, and testing. The checklist ensures all stages of the waterproofing work are properly completed before moving to the next.
This document is a checklist for waterproofing work being done at the Ramanujan IT City TRIL Info Park project. It outlines the materials, specifications, and checks to be completed at each stage of the waterproofing process, including surface preparation, application of injection grout and waterproofing membranes, curing times, and testing. The checklist ensures all stages of the waterproofing work are properly completed before moving to the next.
Download as XLS, PDF, TXT or read online from Scribd
Download as xls, pdf, or txt
You are on page 1/ 1
ALLIANCE 1st - TRIL INFOPARK LTD
Project : RAMANUJAN it City, TRIL Info Park
Checklist for Waterproofing Work Date Building Level Sl. No. 1 1a Location Materials Specfication Checks Materials Greenseal Injection Grout Greenseal Flexi 201 Greenseal Polydek 1b 2 2a Manufacturer's Material Test Certificates Process Checks Surface Preparation ITEM TO BE CHECKED Has the concrete surface has been cleaned from grease, oil and dust Have they checked for any honey combs to be hacked off Flush with water at all juctions between slab & wall to remove the loose particles & dust before doing Angle Fillet Have they done angle fillet at all junctions between slab and wall of 25mm X 25mm with GS Injection Grout, cement and water Have they cured the Angle Fillet for 2 to 3 hours GS Flexi 201 Part A (Powed) and Part B (Liquid) should be Mechanical mixed with slow speed drill & Stirrer Have they applied mixed GS Flexi 201 Slurry by using brush on the prepared surface Have they cured the 1st coat of GS Flexi 201 for 2 to 3 hours Date of checked Signature REMARKS Batch No Experiy Date Signature REMARKS
2b Cleaning the Junction between slab & wall
2c
Angel Fillet
2d Mixing of Greenseal Flexi 201 Application of Greenseal Flexi 201 (one coat)
2e
2f
2g
2h
Have they applied the 1st Coat of GS Polydek after curing of GS Flexi 201 Have the allow the First Coat of Polydek to cure for 2 to 3 hours Laying of Polyester mat over the 1st coat of GS Polydek Polyester mat Reinforment Have they applied 2nd & Final Coat of GS Polydek over the Polyester mat Application of Greenseal Polydek 2nd Coat Have they allowed 12 hours of curing for Final coat of Polydek, to ensure for foot traffic Have they Packed the Pipe Holes with GS Injection Grout, cement and water Pipe Packing After completion of 48 hours water ponding test to be carried out and no leaks observed Testing Application of Greenseal Polydek 1st Coat
Remarks
dSetters 'n' Waterproofing Date : / / 2012 Page : 01 of 01
