Gain cutting edge expertise with this prestigious, practical ADVANCED DIPLOMA

52368

Advanced Diploma of

ELeCTRICAL AND INSTRUMeNTATION (E & I) ENGINeeRING FOR OIL AND GAS FACILITIeS**
Start Date:
For upcoming start dates, please view our program schedule at:

http://www.eit.edu.au/schedule

WHAT YOU WILL GAIN:

Skills and competencies in E & I oil and gas engineering Knowledge of the latest technologies in E & I oil and gas engineering Key techniques in operating your facility to the highest level of safety and in protecting the environment Tremendous boost to your E & I oil and gas career no matter whether you are a new engineering graduate or a technician Decades of real experience distilled into the program presentations and materials Guidance from real E & I oil and gas experts in the field Hands-on practical knowledge from lecturers with extensive real-world experience Credibility as the local expert in E & I oil and gas Networking contacts in the oil and gas industry Improved career prospects and income An EIT Advanced Diploma of E & I Engineering for Oil and Gas Facilities

Visit our website: www.eit.edu.au

** A note regarding recognition of this program in the Australian education system: The EIT is the owner of this program. The program is officially accredited within the Australian Qualifications Framework by the Training Accreditation Council, and is approved by the Australian Skills Quality Authority (ASQA) for delivery by the EIT in all Australian states. The EIT delivers this program to students worldwide.
V0008 RTO provider 51971 ACN 135 762 426

ADVANCED DIPLOMA OF ELECTRICAL AND INSTRUMENTATION

(E & I) ENGINEERING FOR OIL AND GAS FACILITIES

Introduction
There is a growing shortage, and hence opportunity, for Electrical and Instrumentation (E & I) technicians, technologists and engineers in the oil and gas industry. This is due to an increasing need for higher technology methods of obtaining and processing oil and gas as it is a finite declining resource. The price of oil is heading upwards steadily, thus making personnel and their associated oil and gas expertise in these industries even more valuable. The technical challenges of extracting oil and gas are becoming ever more demanding, with increasing emphasis on more marginal fields and previously inaccessible zones such as deep oceans, Polar regions, Falkland Islands and Greenland. The aim of this 18-month e-learning program is to provide you with core E & I engineering skills so that these opportunities may be accessed, to enhance your career, and to benefit your firm. Often universities and colleges do a brilliant job of teaching the theoretical topics, but fail to actively engage in the application of the theory of E & I engineering, especially the necessary practically based subjects for the oil and gas industries. Much of the material key to E & I practice and its professional application in the workplace is not covered in sufficient detail in university and college curriculums. This advanced diploma is presented by lecturers who are highly experienced engineers from industry, having 'worked in the trenches' in the various E & I engineering areas. When doing any program today, a mix of both extensive experience and teaching prowess is essential. All our lecturers have been carefully selected and are seasoned professionals. This advanced diploma program provides a practical treatment of electrical power systems and instrumentation within the oil, gas, petrochemical and offshore industries. Whilst there is some theory this is used in a practical context giving you the necessary tools to ensure that the Electrical and Instrumentation hardware is delivering the results intended. No matter whether you are a new electrical, instrumentation or control technician/technologist/graduate engineer or indeed, even a practising facilities engineer, you will find this program beneficial in improving your understanding, skills and knowledge of the whole spectrum of activities ranging from basic E & I engineering to advanced practice including hazardous areas, data communications along with a vast array of E & I equipment utilised in an oil and gas environment.

VALUE plus!
As part of the incredible value we have built into this program, you also receive: Two places on any IDC Technologies public 2-day workshop* or Two places at any IDC Technologies conference (conference component only,
excludes workshop if available)*

plus A library of 30 technical eBooks All of this is valued at over US$5000! You may also be eligible for a tax deduction on your personal income tax contact your tax advisor for more information.

*to be used within 2 years of program enrolment and subject to availability. Your fee for this program must be up to date. The offer is for workshop or conference fee only and does not include travel, accommodation or other costs. The EIT is not responsible for cancellation or postponement of IDC Technologies workshops and conferences. Other conditions may apply at our discretion.

About the Engineering Institute of Technology (EIT)

The key objective of the Engineering Institute of Technology (EIT) is to provide an outstanding practical engineering and technology education; from Diplomas and beyond. The finest engineering lecturers and lecturers, with extensive real engineering experience in industry, are drawn from around the world. The learning is gained through synchronous, online (e-learning) technologies. The EIT offers awards in a growing array of engineering fields. Many (perhaps, most) engineering faculties at universities and colleges experience a significant challenge delivering the program-work affordably and with excellence. The EIT achieves this using online based education - economical class sizes are attainable, international experts are engaged to instruct and remote laboratories and simulation software are employed. The EIT is a sister company of the well known and reputable engineering training organisation, IDC Technologies. IDC has been operating for over 20 years, from offices throughout the world, delivering practical short programs to well over 500,000 engineers and technicians.

If you want to improve career prospects and be trained by excellent trainers with a thorough knowledge of the industry and train at your own pace then I would recommend this program.  Gary Burrowes, BHPBilliton This has been the best study process I have gone through and for advancing the career it is a must. The program content is extremely good and practical as I have baffled my engineers with some of the questions in the assignments making them question the content they actually studied. Henk Barnard

To enrol please contact [email protected]

EIT Program Delivery Methodology

Not all e-learning is the same. See why our methodology is so unique and successful. Visit: http://www.eit.edu.au/eit-program-delivery-methodology

RTO provider 51971 ACN 135 762 426

ADVANCED DIPLOMA OF ELECTRICAL AND INSTRUMENTATION

(E & I) ENGINEERING FOR OIL AND GAS FACILITIES

Accreditation & International Standing for Online Engineering Training

The EIT (and many individual programs) has received recognition, endorsement and/or accreditation as a training provider from authorizing bodies based around the world, including those listed below. Please ask us for specific information for your location.
AUstRaLia

Diplomas, for example, when registered at the time of award under the Australian Qualification Framework (AQF) are typically recognized as broadly comparable to a National Diploma at level 6 on the NZQF.
sOUtH aFRiCa The Engineering Council of South Africa (ECSA) )

The Engineering Institute of Technology was declared an educational institution under Section 10 of the copyright Act 1968. The notice was published in accordance with section 10A(4) of the act in the Commonwealth of Australia's Business Gazette (number B56): The Engineering Institute of Technology declares that its principal function is the provision of programs of study or training for the following purpose: the continuing education of people engaged in a particular profession or occupation. Dated 8th November 2011. The Engineering Institute of Technology (EIT) is a private Registered Training Organization (RTO) provider number 51971. EIT is registered with and regulated by the Australian Skills Quality Authority (ASQA). ASQA is the national regulator for Australias vocational education and training sector. They regulate programs and training providers to ensure nationally approved quality standards are met. Many of the programs offered by EIT are nationally accredited and recognized qualifications and are listed on training.gov.au (TGA). TGA is the official National Register of information on Training Packages, Qualifications, Programs, Units of Competency and Registered Training Organizations (RTOs). EIT qualifications accredited to date can be viewed on EITs registration page on TGA under the Scope tab. You can find EIT on TGA by searching for our provider number 51971. Programs listed on EITs scope have been approved for delivery in all Australian states and territories. Please note that many additional programs are also in the process of accreditation.
The Advanced Diploma of Electrical and Instrumentation (E&I) Engineering for Oil and Gas (52368) is a nationally accredited and recognized qualification under the AQF. The Australian Qualifications Framework (AQF) is the national policy for regulated qualifications in the Australian education and training system. Members of Engineers Australia (EA) - are entitled to claim CPD hours for private study, short programs,

which aims to promote a high level of education and training of practitioners in the engineering profession, has validated a large number of EIT programs. Members can check details on the ECSA website. South African students who successfully complete an EIT Advanced Diploma and other qualifications have the option to apply for recognition by SAQA, who have determined in the past that an Australian Advanced Diploma program is at Level 6 in the South African National Qualifications Framework (equivalent to Higher Diploma) in South Africas educational system. However, in most cases formal individual recognition by SAQA is not required as the international validity and accreditation of this credential is very sound.
United states
IEEE is the worlds largest professional association advancing innovation and technological excellence. EIT is an IEEE Continuing Education Provider. IEEE Continuing Education Programs are peer-reviewed by content experts. This peer review guarantees both quality of the technical content of learning materials, as well as adherence to IEEEs strict criteria for educational excellence. All programs that pass this strict process are entitled to award IEEE Continuing Education Units (CEUs), recognized as the standard of excellence for continuing education programs in IEEEs fields of interest. The International Society of Automation (ISA) is a leading, global, non-profit organization that sets the standard for automation around the world. ISA develops standards, certifies industry professionals, provides education and training, publishes books and technical articles, and hosts conferences and exhibitions for automation professionals. ISA has reviewed the curricula of the programs offered by EIT as they relate to the instrumentation, control and automation discipline and are enthusiastic about promoting their availability to the automation community.

managed by ECCTIS Ltd (see http://www.ecctis. co.uk/naric/Default.aspx) which administers the service for the UK Government. Graduates of EITs Advanced Diploma programs in the UK can be confident that their international qualification has been officially evaluated as comparable to the BTEC/SQA Higher National Diploma (HND) standard/Foundation Degree Standard. A BTEC Higher National Diploma is at the same level of the National Qualifications Framework as NVQ/ SVQ Level 4. Recognition will be at a higher level for graduate programs. The Institute of Measurement and Control in the United Kingdom is Britain's foremost professional body for the Automation Industry. An EIT Advanced Diploma is recognized by the Institute of Measurement and Control as contributing to the initial professional development required for eventual registration as Chartered or Incorporated Engineers. The Advanced Diploma is also approved by the Institute as providing CPD.
Canada

EIT is a Participating Partner with the Engineering Institute of Canada (EIC) and EIT programs can be utilised by members to register for Continuing Education Units (CEUs). EICs Continuing Education Program is supported by The Canadian Council of Professional Engineers, The Association of Consulting Engineers of Canada, and The Canadian Academy for Engineering. EIC is a member of the International Association for Continuing Education and Training, with headquarters in Washington, DC. OtHeR COUntRies Students who successfully complete an EIT Advanced Diploma and other qualifications may be able to apply for recognition of their qualification within the local (home country) education system. Many countries have a process for recognition of foreign qualifications which is utilised by new residents when they have qualifications earned overseas. Although you will be studying from your home country you will be awarded an Australian qualification from the EIT, so your EIT qualifications may be able to be recognized as a foreign qualification if you apply through your local system. If you would like to find out more, please contact your local education authorities because it is not practical for the EIT to know the systems that apply in all countries. However, in many cases formal individual recognition within the home country may not be required because the international validity and accreditation of this credential is very sound. Members of other engineering organizations may be able to claim credit for professional development and are advised to check with their own organization.

and learning activities at the workplace. CPD hours can be claimed for our programs in most cases, but we would always advise individual members to check with EA regarding specific programs.
NEW ZEALAND The New Zealand Qualifications Authority

United KinGdOM

recognizes individual qualifications gained overseas on a case-by-case basis. Advanced

Nationally recognised qualifications that have been achieved at EIT can be compared by UK NARIC to the UK framework. UK NARIC is the UKs national agency responsible for the recognition of qualifications from overseas and provides services for individuals and organizations to compare international qualifications against UK qualification framework levels. UK NARIC is

For additional information please see http://www.eit.edu.au/international-standing.

RTO provider 51971 ACN 135 762 426

ADVANCED DIPLOMA OF ELECTRICAL AND INSTRUMENTATION

(E & I) ENGINEERING FOR OIL AND GAS FACILITIES

Program Structure
The valuable oil and gas program has five main streams: 1. Electrical engineering 2. Instrumentation and control engineering (onshore and offshore) 3. General oil and gas engineering 4. Subsea instrumentation and control 5. Floating Production, Storage and Offloading (FPSO) Facilities

Presentation Format
The programme features real-world applications and uses a multi-pronged approach involving interactive on-line webinars, simulation software and self-study assignments with a mentor on call. The program consists of 72 topics delivered over a period of 18 months. Presentations and group discussions will be conducted using a live, interactive software system. For each topic you will have an initial reading assignment (which will be delivered to you in electronic format in advance of the online presentations). There will be coursework or problems to be submitted and in some cases there will be practical exercises, using simulation software and remote labs that you can easily do from your home or office. You will have ongoing support from the lecturers via phone, fax and e-mail.

Oil and Gas Electrical Engineering Design, Installation, Commissioning and Maintenance
Electrical power systems within the oil, gas, petrochemical and offshore industries have significantly different characteristics to a typical power utility and associated consumers of electricity. This program provides an excellent balance between basic applicable mathematical theory and practical know-how which is so essential in applying this immediately to your work. Solid, practical knowledge is provided in the electrical systems equipment used in off-shore production platforms, on-shore separation and production plants, drilling rigs, pipelines, refineries and even general petrochemical plants. Because of the hazardous nature of oil and gas plants there is particular emphasis on the design, installation, commissioning, maintenance and use of electrical equipment in hazardous areas. You will gain confidence in basic design, selection, and operation of the typical electrical equipment used in these areas. Numerous practical rule-of-thumb examples are given to enable you to make quick estimates and assessments whilst engaged in your work.

Live Webinars
During the program you will participate in 72 live interactive sessions with the lecturers and other participants from around the world. Each webinar will last approximately 60 to 90 minutes, and we take student availability into consideration wherever possible before scheduling webinar times. Contact us for details of webinar session scheduling. All you need to participate is an adequate Internet connection, speakers and a microphone. The software package and setup details will be sent to you prior to the program.

Oil and Gas Instrumentation and Control Engineering Design, Installation, Commissioning and Maintenance
Instrumentation and control engineering is the most diversified and challenging area in the oil and gas industry. It covers a whole gambit of engineering such as: Instrumentation Engineering - You will learn about design documentation and specification, field measurement devices, control elements, condition and machine monitoring, field bus, actuators, control valves, severe service valves, solenoids, hydraulics, testing and calibration, wireless instrumentation, instrument fittings/monoflanges/manifolds/tubing and accessories, on-line process analysers and sample systems, pressure relief valves, choke valves and associated real world applications. Control System Engineering This extremely interesting area covers Programmable Logic Controllers (PLCs), Supervisory Control and Data Acquisition (SCADA), Distributed Control Systems (DCS), control system tuning, basics of advanced process control, control applications, compressor surge control, pneumatic controllers, programmable automation controllers, process control security, OPC and smart plant concepts. Safety Instrumented Systems SIS is a very important part of any oil and gas plant in that these systems provide the most important safety layer necessary to protect a facility. You will learn about Safety Integrity Levels (SIL), the importance of maintaining SIS instrumentation, safety logic, Burner Management Systems (BMS), emergency shutdown systems and their certification, shutdown and blowdown valves, SIS standards, fire and gas detection and protection systems and devices along with combined safety systems. In addition you will get some insight into High Integrity Pipeline Protection Systems (HIPPS).

Prior Learning Recognition and Exemptions

The EIT can give you full or partial credit for modules where you can demonstrate substantial prior experience or educational background. An assessment fee may apply. If you wish to find out more please ask us for your copy of the policy for recognition of prior learning.

General Oil and Gas Engineering

This covers critical aspects which are applicable across all disciplines associated with oil and gas engineering including; Corrosion as many oil and gas installations are either on the coast or in offshore locations a basic understanding of corrosion and how to mitigate against its effects is very important. By just installing a fitting of the wrong material, the safety of a multimillion dollar facility can be compromised. Health, Safety and Environment, including facility safety cases, legislation, spill reporting, hazards, work permits, safe working practices, working with high pressure hydraulics and Job Safety Analysis (JSA) documentation. How to write a resume and CV, techniques for selling yourself at an interview. Basics of oil and gas process plant, the importance of understanding how a plant works with real examples of an offshore oil and gas platform, refinery and LNG plant.  4
Continued next page
RTO provider 4 51971 ACN 135 762 426

Time Commitment for the Program

You will need to spend an estimated 6-10 hours per week. This includes the reading of the material prior to your attendance at each hour webinar (45 minutes with 15 minutes for discussion) and the time needed to complete assignments for submission. This time would be required to ensure the material is covered adequately and sufficient knowledge is gained to provide sound, enduring and immediately useful skills in engineering. The EIT operates almost all year long, so your studies will continue most weeks of the year to enable you to achieve the qualification in an accelerated time period when compared to a traditional semester-based system.

ADVANCED DIPLOMA OF ELECTRICAL AND INSTRUMENTATION

(E & I) ENGINEERING FOR OIL AND GAS FACILITIES

Program Structure (continued)

You will then work through a project such as a three-phase inlet separator, its components, design, operation, control and instrumentation and maintenance. You will gain a strong introduction to Front End Engineering Design (FEED) with coverage of flow diagrams, P&IDs, control system philosophy, safety instrumented system logic, specification, cost estimates and design approval. You will then be exposed to final design activities including authorisation for expenditure, specifications, power systems, wiring and connection diagrams, logic diagrams and bill of materials. Finally, the construction, installation and commissioning phase will be covered with an emphasis on factor acceptance testing (FAT), commissioning, start up and maintenance.

Where to from here?

Articulation to higher level programs at the Engineering Institute of Technology (EIT)
Successful students of the Advanced Diploma of E & I Engineering may be able to move into postgraduate studies with the EIT. This advanced diploma program articulates into the Vocational Graduate Diploma of Project Management in Industrial Automation and (for successful students) into the Master Degree in Business and Project Management (provided by the Asia Pacific International College). Even though there would appear to be some overlap no credit can be given for any topics covered in the Advanced Diploma as the level of materials in the Vocational Graduate Diploma of Project Management in Industrial Automation is at a considerably higher level (above that of a Bachelor degree). Each individual application is considered on its merits and admission is subject to the applicant meeting specified criteria. It is crucial that the candidate for the Vocational Graduate Diploma is highly competent with all the materials associated with the lower level advanced diploma program before attempting the postgraduate level of knowledge. The criteria for entering a Graduate Diploma normally include a bachelor of engineering with sufficient experience and demonstrated knowledge. Students who have achieved outstanding results at advanced diploma level and can demonstrate a high level of experience may be considered.

Subsea Control Systems Engineering

Subsea manifolds are commonly utilised in offshore applications, these are either tied back to platforms or piped onshore. These have instrumentation and control systems that are specifically designed for deepwater use. You will learn about the basic concepts and how these systems are monitored, controlled and maintained.

Floating Production, Storage and Offloading (FPSO) Facilities

Floating production, storage and offloading facilities receive crude oil and gas from deepwater wells and store it until the crude oil can be pumped into other vessels for transport to shore. This facility is especially useful for extending extraction processes into deep water areas previously inaccessible. The processing facilities onboard the FPSO separate the produced oil, water and gas. Floating LNG (FLNG) facilities are the latest oil and gas facilities being deployed around the world. The electrical and instrumentation systems relevant to FPSOs will be examined during this program.

Core Modules
The 23 modules will be completed in the following order:
1 2 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. Fundamentals of Electrical Engineering Fundamentals of Instrumentation, Measurement and Process Control Engineering Electrical Drawings, Documentation and Schematics For detailed information Power Distribution Power Transformers on the content and Switchgear for Power Distribution breakdown of modules, Cables and Wires Maintenance and Installation Practice see pages 14 to 33 Power System Protection and Co-ordination (incl. Fault Calculations/Stability and Protective Relays) Electrical Safety and Grounding/Earthing, Bonding and Lightning Protection Power Quality, Uninterruptible Power Supplies (UPSs), Surge Protection and Noise (EMI/EMC Control) Troubleshooting, Maintenance and Protection of AC Electrical Motors and Variable (or Adjustable) Speed Drives (VSDs) for Instrumentation and Control Systems Electrical Equipment in Hazardous Areas Electrical Applications to an Oil and Gas Platform and Site

Electrical Engineering

Instrumentation and Control

14 General Instrumentation Standards in Oil and Gas and Best Practice in Process, Electrical and Instrumentation Drawings and Documentation 15 Process Instrumentation 16 Calibration, Installation and Maintenance of Instruments 17 Process Control Basics and Control Valves Sizing, Selection and Maintenance (incl. Pressure Relief Valves) 18 Programmable Logic Controllers 19 SCADA Systems and Distributed Control Systems 20 Industrial Data Communications (incl. Fieldbus and Industrial Ethernet) 21 Safety Instrumentation and Emergency Shutdown Systems for Oil and Gas (IEC 61511 and IEC 61508) Basic Introduction 22 Wellhead and Flowline Control Control Systems 23 Oil and Gas Specific Applications Floating Production, Storage and Offloading (FPSO) Facilities 5
RTO provider 51971 ACN 135 762 426

ADVANCED DIPLOMA OF ELECTRICAL AND INSTRUMENTATION

(E & I) ENGINEERING FOR OIL AND GAS FACILITIES

Practical Exercises, Remote Labs and Assignments

You will participate in practical exercises using a combination of remote laboratories and simulation software, to ensure you get the requisite hands-on experience. This will give you a solid practical exposure to the key principles covered in the program and ensure you are able to put theory into practice. As research shows, no matter how gifted and experienced an lecturer (and we believe ours are some of the best worldwide), no one learns from an lecturer only presenting program materials to them in a lecture format. It is only by the additional activities of hands-on exercises using simulation software, remote laboratories, practically based assignments and interactive discussion groups with both your peers and the lecturer that you are able to internalise this knowledge, "take ownership of it" and apply it successfully to the real world. You should note that there is some degree of overlap between the practical sessions between the different units to reinforce the concepts and to look at the issues from different perspectives. Traditional distance learning thus presents challenges in achieving these goals but we believe today with the modern e-learning technologies available combined with outstanding lecturers that we can give you an equivalent or indeed even better experience than on a traditional university campus. Practical sessions may be added, deleted or modified by the lecturers to ensure the best outcome for students.

Why EIT?
Our lecturers are selected and recruited from amongst the top engineers/lecturers in their field - worldwide. These presenters are highly skilled at presenting challenging concepts and ideas to students of varying levels and abilities. As shown in the detailed program prospectus, the programs are aimed at practising professionals giving hard-hitting practical know-how relevant to today's market and is aimed at people working in industry. We design and select Case Studies and practical exercises in the program based upon real-world business requirements Feedback from the tens of thousands of students we have trained over many years has allowed EIT a unique understanding of real world business requirements and we have tailored the program accordingly. We have experience in training over 500,000 engineers and technicians throughout the world and have built up a library of outstanding reference materials which focus on what engineers and technicians need in their work today in industry and mining. The value of these references is considerable and they are a great asset to industry professionals. These reference materials are included in the cost of the program. The program content is challenging and designed for engineers and technicians already working in industry. We assume a general understanding of the demands of the workplace. A student without practical experience would be unsuited to the program.

Benefits of Live E-learning

Attend lessons in a live, virtual classroom with your lecturers and fellow students Upgrade your skills and refresh your knowledge without having to take valuable time away from work Receive information and materials in small, easy to digest sections Learn from almost anywhere - all you need is an Internet connection Have constant support from your program lecturers and coordinator for the duration of the program Interact and network with participants from around the globe and gain valuable insight into international practice Learn from international industry experts Live interactive webinars, not just a book on the web Receive an accredited EIT Advanced Diploma of Electrical and Instrumentation (E & I) Engineering for Oil and Gas Facilities

Who Should Attend

This program would be ideal for you if you are seeking to get know-how and expertise in the oil and gas business and are an: Instrument and process control technician or technologist Instrument fitter Chemical or mechanical engineer Electrical engineer currently working in a different area to oil and gas Experienced electrician A recent graduate electrical, instrumentation or mechanical engineer Even if you are highly experienced you will find this a great way to become familiar with the oil and gas technology as quickly as possible.

Program Fees
Your program fees include weekly webinars with leading engineering and technical experts, 30 technical eBooks, all program materials, software and postage, plus grading and support from the program coordinators and lecturers. We provide payment options and can accept fees in a variety of currencies. Please contact your advisor for fees in an appropriate currency for your location.

For more information or to enrol, please contact us at [email protected]

6
RTO provider 51971 ACN 135 762 426

ADVANCED DIPLOMA OF ELECTRICAL AND INSTRUMENTATION

(E & I) ENGINEERING FOR OIL AND GAS FACILITIES

Comprehensive e-Books and Associated Documentation

You will receive 30 of our up-to-date technical e-Books to add to your library. Together these texts contain over 8000 pages of valuable know-how distilled from years of experience in presenting these programs throughout the world. Participants only completing selected topics will receive only the relevant documentation. 1) Electrical Drawings and Schematics 2) Practical Power Transformers: Operation, Maintenance and Testing 3) Practical Power Distribution 4) Grounding/earthing, Shielding and Surge Protection of Electrical Equipment for Instrumentation and Control 5) Practical Power System Harmonics, Grounding/Earthing and Power Quality - Problems and Solutions 6) Practical Instrumentation for Automation and Process Control 7) Practical Control Valve Sizing, Selection and Maintenance 8) Practical Programmable Logic Controllers (PLCs) for Automation and Process Control 9) Practical SCADA Systems for Industry 10) Practical Troubleshooting and Problem Solving of Industrial Data Communications 11) Practical Safety Instrumentation and Emergency Shutdown Systems for Process Industries 12) Practical Hazardous Areas for Engineers and Technicians 13) Best Practice in Process, Electrical and Instrumentation Drawings and Documentation 14) Practical Power System Protection for Engineers and Technicians 15) Practical Process Control 16) Practical Troubleshooting and Problem Solving of Modbus Protocols 17) Practical Fundamentals of Telecommunications and Wireless Communications 18) Safe Operation & Maintenance of Circuit Breakers and Switchgear 19) Practical Energy Efficiency, Design, Engineering and Auditing 20) Lightning, Surge Protection and Earthing of Electrical & Electronic Systems in Industrial Networks 21) Electrical Maintenance for Engineers and Technicians 22) Practical Shielding, EMC/EMI, Noise Reduction, Earthing and Circuit Board Layout 23) Practical Analytical Instrumentation in On-Line Applications 24) Practical Alarm Management for Engineers and Technicians 25) Practical Industrial Flow Measurement for Engineers and Technicians 26) Practical Intrinsic Safety for Engineers and Technicians 27) Fundamentals of Process Plant Layout and Piping Design 28) Practical Mechanical Seals - Selection, Maintenance and Troubleshooting 29) Practical Machinery Vibration Analysis and Predictive Maintenance 30) Leading Your Engineering Team to Top Performance Please Note: Students who choose to pay upfront will receive all 30 e-Books in advance. If you opt to pay by installments you will receive e-Books periodically throughout the program. e-Books are available in hard copy at 50% of the recommended retail price. Contact us for pricing details.

Entrance Requirements
This Engineering Institute of Technology advanced diploma is an accelerated, practical, work-oriented program. It is designed for engineers and technicians who have some background in the field. This includes those who have technical or trade qualifications who want to move to the next career step, those with substantial relevant work experience who need to formalise and enhance their achievements, and those with higher level qualifications in a related field who wish to develop specialist knowledge. Practical work experience in related areas of engineering would help enormously. It would not be suitable for a student with no relevant work experience. We will review your enrolment application and may recommend pre-program studies if required.

Advanced Diploma Preparation Program

If you are unsure if you have a strong enough grasp of the fundamental knowledge required for this program, or you simply want to refresh your skills and experience e-learning in a shorter program, we recommend that you consider the EITs engineering studies preparation program. This intensive 4-month program covers the fundamentals of engineering maths, physics and chemistry. Please ask your advisor for the brochure. If you don't currently have an existing qualification and/or experience, please contact us for advice. Most important, however, is a determination to persist and complete this program. On completion of this program, 50% of the program fees can be used as a credit towards your fee for an EIT Advanced Diploma program.

Hardware and Software Requirements

All you need in order to join the webinars once registered for the program is an adequate internet connection, PC, speakers and a microphone. The software package and setup details will be sent to you prior to the program.

We are Flexible With Your Commitments

We recognise that personal circumstances can make it difficult to complete the program in the time available. We will be flexible about the time you require to complete the program. You can pause and restart by joining a subsequent intake (a rejoining fee may apply). We will allow up to 3 years from your original start date to complete the program. You can withdraw from the program at any time and receive a Statement of Attainment for the topics you have completed. However, completion of all 72 topics will earn you the EIT Advanced Diploma of Electrical and Instrumentation (E & I) Engineering for Oil and Gas Facilities.

RTO provider 51971 ACN 135 762 426

ADVANCED DIPLOMA OF ELECTRICAL AND INSTRUMENTATION

(E & I) ENGINEERING FOR OIL AND GAS FACILITIES

What Our Students Have to Say

QUOTES FROM PAST STUDENTS on the EIT SURVEY ON E-LEARNING to the following question: What made you choose an EIT program(s)?
Good reputation, had attended good full-time programs previously.
Worley Parsons

Believed to be good quality based on previous training programs Ihave done in person. BHP Billiton, South Africa It was referred to me by a colleague and I have attended seminars run by IDC before. The program that I am currently enrolled in also had all the outcomes I was looking for to further my career. Rio Tinto The program content was relevant to my work environment and practical. Alcoa I have done a few IDC programs in the past and found them to be very good and delivered by people with practical knowledge of the subjects. Kalgold It provides good online program delivery including its quality support structures.
OneSteel

Program content seems practical and applicable. I already have a BSc where the focus is on the theory.
BHP Billiton, South Africa

Program facilitator CV, ...reputation, e-learning flexibility.

SMK, New Zealand MIPAC, Australia

Content tends to practical and targeted. Non-vendor specific training and lower program costs with online training capabilities. Worley Parsons The content of the program and the way the program was broken down were the key factors. GEA Group I can do those programs at my own free time which made it more convenient for me.
Iluka, Australia

Industry recognition and recommendation by colleagues. Rio Tinto Seemed the most convenient option, and it was! CPIT, New Zealand Program content ease of study option.
Nestle, South Africa

The content of the program made up my mind.

Transportadora de gas del Norte, Argentina

Their programs are standard and program material as well as lecture are okay.
Shell, UK

Content was applicable to my job and industry. Taught by industry experts not academics. E-room delivery mode. Accreditation in various nations.
Sanofi Pasteur, Australia

Program interest and content.

ABB, Australia

Because it is specialist, and so many available programs. Kacst, Saudi Arabia Covered all my criteria and gave me recognised qualifications on completion.
Netafim

The fact the I could do it online and it was in line with furthering my knowledge for work. CAED, Australia It ticked all the boxes ... quality, suitability, depth, length.
Powerco, New Zealand

Its international recognition with body endorsing certification. Easy to attend lessons after work hours. Easy way of program payment.
Kinyara Sugar Ltd, Uganda

The most practical and technical offerings by the most qualified lecturers for distance learning. Encana Natural Gas On line references, price, and various time frames available to sit in on the class. Also, one more important item was being able to converse with the lecturer and class instead of working totally on my own.
Mitchell Technical Institute

Better choice of topic.

Schneider Electric, UK

Rockwell RA

I took a previous program, IDC [associated organisation] is professional. Cat Group I have done other programs with IDC {associated organisation] and was happy with the service provided. GHD Had completed programs previously. Good content. Woodside I understood from friends that it is good quality. Rio Tinto Better choice of topic.
8
Rockwell RA

Program was visible and relevant. Convenience.

Rio Tinto

To be perfectly honest with the small amount of research on various programs I did the programs are generally the most relevant to my area of work. That's not to say they are perfect but they seem to be superior to others readily available in this part of the world.
WEL Networks, New Zealand

Program content. Accreditation of the training institution. Cost. MODEC Offer the correct program, timing and affordable cost. Folec, Brunei Possibly the most recognised online institution within my industry.
DRA, South Africa
RTO provider 51971 ACN 135 762 426

ADVANCED DIPLOMA OF APPLIED ELECTRICAL ENGINEERING

Frequently Asked Questions

What are the advantages of studying online?
We know that many potential students have part or full-time employment as well as family commitments, so finding the time to study a classroombased program is not always possible. Many students also have geographical, travel and time limitations and do not have an accessible institution or training provider. We have taken this into consideration and developed an affordable, flexible, online approach to training. This means that you can study from anywhere, with minimum downtime from work but still have the necessary interactive learning experience. The software we use does not require very fast internet connection or a sophisticated computer. A basic connection and hardware are sufficient.

Contact us! For any other enquiries, please contact us at [email protected]

What are the fees?

The EIT provides distance education to students located almost anywhere in the world it is one of the very few truly global training institutes. Program fees are paid in a currency that is determined by the students location. A full list of fees in a currency appropriate for every country would be too complex list here and, with todays exchange rate fluctuations, difficult to maintain. To find out the fees for your location, contact us at [email protected] .

What if I cannot join or I miss a live webinar?

Webinars are recorded and available to students upon request. One requirement of the program is that you join at least 70% of the live sessions. The live webinars offer the opportunity to interact with the presenter and other participants from around the globe - an essential yet enjoyable part of the learning process. Circumstances such as on-site work can make attendance difficult at times. These situations need to be clearly communicated with your e-learning coordinator. Feedback from the recordings may be required and assignment submission maintained.

What do I need?
An adequate Internet connection, speakers and a microphone. A headset is recommended. The necessary software and program materials are provided by us.

When will the sessions take place? When will I receive a webinar schedule?
The webinar schedule is not put together until after registrations close. The reason for this is that the program is promoted globally and we often have participants from several time zones. When you enrol you will receive a questionnaire which will help us determine your availability. When all questionnaires are returned we create a schedule which will endeavour to meet everyones requirements. Each webinar runs 2 or 3 times during each presentation day and we try our best to ensure that at least one session falls into your requested time frames. This is not always possible, however, due to the range of locations of both presenters and students. If you are unable to attend the webinars scheduled, we do have some options available. Contact the EIT for more details.

Doesnt it get boring? How can an e-Learning program be interactive?

Boredom can be a real risk in any form of learning; however, we use an interactive approach to our e-Learning with live sessions (instead of recordings) for most presentations. The webinar software allows everyone to interact and involves participants in group work; including hands-on exercises with simulation software and remote laboratories where possible. You can communicate with text messages, or live VoIP speech, or can even draw on the whiteboard during the sessions. This all helps to keep you motivated and interested.

What do live webinars involve?

These are live, interactive sessions over the Internet. You will join the lecturer and other participants from around the world in an online virtual classroom where you are able to watch a presentation, and communicate with the lecturer and other students via audio, text messaging or drawing on the whiteboard. Each webinar is between 60 and 90 minutes in duration and the sessions are scheduled at 2 or 3 different times during the presentation day. This allows you to select the session which is most convenient.

Can I complete the program in less time?

Our programs actually require attendance and participation at the live webinars. The interaction which takes place is an important part of the learning process. Our experience has shown that the interactive classes work exceptionally well and students are far more likely to stay motivated, enjoy the program, and complete the program successfully. See also What if I cannot join or I miss a live webinar? In addition, accelerating the program would be quite onerous for most students.

How much time do I need? How long is the program?

The program reading and assignments may consume anywhere from 5 to 10 hours per week. This will vary depending on the program subject matter and your existing knowledge The EIT does not use a traditional semester-based system, which means that you can complete the qualification faster without long breaks. Each advanced diploma program is delivered over an intensive 18 months. We do break for about 4 weeks per year for traditional festive seasons.

Contact us! For any other enquiries, please contact us at [email protected]

9
RTO provider 51971 ACN 135 762 426

ADVANCED DIPLOMA OF ELECTRICAL AND INSTRUMENTATION

(E & I) ENGINEERING FOR OIL AND GAS FACILITIES

International Expert Speaker Faculty

Your team of professional presenters and facilitators are drawn from experts in their field. They will work closely with you for the duration of the program. Please note: Lecturers are subject to change. Students will be notified in the event new lecturers join the faculty.

Program Designer and Consultant Jim Russell IEng (UK) FIICA MInstMC
Jim has been working in the Instrument and Control engineering discipline for over 40 years, mainly in the oil and gas industry. After studying in the UK, he started his career as an Instrument Apprentice with Esso Fawley, rapidly followed up as an Assistant Instrument Engineer with British Gas, which he regarded as his "real apprenticeship". On moving to Australia, he then progressed to Instrument Engineer with Worley Engineering on the Woodside Energy North Rankin "A" platform, before becoming the Instrument focal point at WAPET. Following this his role was Lead Control Systems Engineer on the Woodside Energy Goodwyn A platform design with responsibility for the Process Control and Safety Systems, where he pioneered the successful introduction of new technologies such as industrial data communications underpinning the traditional instrumentation and Distributed control Systems. After successful completion of this project Jim joined rapidly growing Australian multinational, Woodside Energy, as Principal Instrument Engineer with responsibilities for standards, technical integrity, new technology and instrument systems. Jim now consults in a wide range of mainly oil and gas topics. As a public service to engineering professionals, Jim has set up what must surely be one of most comprehensive (free or pro bono) resources on Instrumentation, Control, Fire and Gas and Safety System called iceweb ( http://www.iceweb.com.au). He has also acted as chair of the Foundation fieldbus End User Council Australia, and was one of only five engineers worldwide who are members of the Foundation fieldbus End User Advisory Council. When not consulting and reading, Jim enjoys time with his family and at his beloved beachside cottage "down south".

Dean of Engineering, EIT

Program Designer Dr Steve Mackay PhD, CP Eng, FIE (Aust) BSc(ElecEng), BSc(Hons), MBA, MMR

Steve has worked in engineering throughout Australia, Europe, Africa and North America for the past 30 years. He has presented numerous industrial automation and industrial data communications programs worldwide to over 18,000 engineers and technicians, and has a particular interest in practical and leading edge aspects of marketing, business and engineering practice. He is a fellow of Engineers Australia and the technical director and founder of IDC Technologies, a growing engineering training and publishing firm which has been operating from offices throughout the world since 1992. He has also acted as the author or editor of over 30 engineering textbooks sold throughout the world. He feels that all engineering businesses need to think globally and keep experimenting with new approaches. Currently, he is actively involved in research and implementation of remote lab technology.

LECTURER John Piperides

John is a professional electrical engineer with over 25 years experience in industrial maintenance, production, management, sales and improvement. He has held management positions in several manufacturing and sales companies. His diverse responsibilities have included contract negotiation, authoring and responsibility of departmental budgets, daily management of over 20 reports, practice of cGMP, auditing in a pharmaceutical plant, and system administration and programming of diverse IT and embedded systems. He has been directly involved with industries including building management, pest control, mining, power utilities, food, pharmaceutical, steel, building products, sugar, paper and pulp, rail and airports. John has completed many years of further education including developing, writing and delivering many work based programs and seminars. He has spent 10 years as a part time teacher at TAFE in electrical engineering, and 15 years delivering structured programs in thermography, power quality, instrument safety, motor drive theory, PLC, SCADA, and pest inspection.

10

RTO provider 51971 ACN 135 762 426

ADVANCED DIPLOMA OF ELECTRICAL AND INSTRUMENTATION

(E & I) ENGINEERING FOR OIL AND GAS FACILITIES

International Expert Speaker Faculty

LECTURER Steve Evans
Steve Evans is a technical expert in the field of electrical systems within buildings and his extensive experience covers a broad range of disciplines and environments. With 7 years direct experience in training, Steve is a member of the Independent Organisation for Licensed Verifiers & Assessors and holder of the following UK training and assessment qualifications: PTLLS, CTLLS, A1 & V1. Steve currently works on a freelance basis (through his own limited company) and provides both electrical training and project management services. As a trainer he covers the delivery of programs relating to electrical installation practice, compliance with regulations and inspection and testing. Steve has delivered distance training via webinars and provided NVQ assessment and verification services. Additionally, Steve has experience managing a company, employing staff and international technical sales.

LECTURER Terry Cousins

PrEng, BSc (Elec Eng)

Terry Cousins was educated at La Salle College in Discovery, and obtained a BSc Electrical Engineering degree from Wits in 1977. He has over 30 years of experience in electrical power and distribution systems in various South African industries including the mining and steel sectors, with national companies such as ISCOR and Chamber of Mines Research. He is currently a director of TLC Engineering Solutions which develops a wide range of instrumentation and measurement systems for industry. He also presents numerous programs on electrical power distribution and power quality, both in South Africa and abroad. Terry is a Senior Member of the SAIEE, and a Member of the IEEE (USA) and has also has served on the South African National Standards committee for power quality instruments (SANS 1816). Terry is an accredited professional with the Green Building Council of Australia, and has BComm and MBL degrees from UNISA. With his extensive experience electrical engineering, you will walk away with valuable know-how that you can apply immediately to your work.

LECTURER Frikkie Marx Pr Eng, B Sc (Eng) Senior Engineer

Frikkie has over 20 years of experience in the fields of power electronics from design to industrialisation. Starting his career on the power system protection side, he migrated to EMC and power supply systems. Frikkie's portfolio of achievements includes the design of power systems, switch mode power supplies, UPS, high precision servo amplifiers, battery and inverter design solar panel applications, vehicle management, specialised computer systems and high current starter for vehicle plants. He is a lecturer and program developer of industrial and power electronics for Technikon SA (UNISA). He is also a project manager/system engineer for the development of electro-optical systems which include video systems for UAVs and a high resolution infra-red camera. Other training activities include the mentorship programs of Kentron, industrial electronics, rockets and robots training programme for the Denel Youth Foundation Bridging Program as well as training consultant. He has also successfully started and managed an IT company specialising in wireless internet and networks. In this new venture he has done strategic technical research, business development with regard to new services/products, wireless management system for repossessed properties, electrified palisade as well as development and presentation of wireless and VoIP technical programs. An enthusiastic lecturer with a wealth of knowledge under his belt, you will gain much from his entertaining style, as thousands of others have benefited from his knowledge. Don't miss this excellent workshop presented by a leading engineer in PE, EO subsystems and EMC/EMI.

LECTURER Geoff Bottrill

HNC, DMS, MIEE

Geoff has been working in the instrumentation, measurement and control fields for over twenty-five years and has spent the past fifteen years specialising in Hazardous Areas, Intrinsic Safety and Instrumentation Drawings. Geoff began his career at Kent Instruments, as a service engineer working in both the UK and East Africa. His experience ranges from systems design functions, on-site trouble shooting to technical and commercial customer support. Recently Geoff has taken on the responsibility of mentoring engineers in training, in addition to the presentation of engineering workshops in the process control and measurement field. His positive interactive style to teaching has made him popular with workshop attendees worldwide. 11
RTO provider 51971 ACN 135 762 426

ADVANCED DIPLOMA OF ELECTRICAL AND INSTRUMENTATION

(E & I) ENGINEERING FOR OIL AND GAS FACILITIES

International Expert Speaker Faculty

LECTURER Deepak Pais
B.E (Electrical & Electronics)

Deepak started his career within the Zinc mining & smelting industry as Project Engineer in Substation & Distribution Greenfield project. He then worked in a Marine and Logistics firm in the Bahamas as Maintenance and Commissioning Engineer. Following this he worked with Japanese and German automobile firms as Maintenance Engineer for Distribution and Utility related systems. He currently works as an Engineer in a regional NSW electricity Distribution utility. Deepak has hands on experience in Distribution, Utility and Substation related systems. He has a particular interest in the consistent interpretation and implementation of Greenfield and Brownfield Standards with an emphasis on safety, reliability, economy and whole of life cost analysis.

LECTURER Dr Rodney Jacobs

NH Dip, M Dip Tech, BA (Hons), D Tech

Rodney has over 20 years experience in the gold mining industry, underground as well as specialising in Metallurgical operations in the Gold Plants. He has worked predominately in the instrumentation; process control and automation field, and is responsible for hardware and software designs associated with instrumentation. His areas of special interest include PLCs, SCADA systems, process control and programming. Having spent many years on the shop-floor, Rodney has built up a vast amount of hands-on practical experience, and is a past recipient of the N & Z award, which is one of the most prestigious awards, for South Africans in the field of instrumentation. Rodney is currently active as a Consulting Engineer in the field of instrumentation, both to the mining industry as well as to other general engineering companies, which require specialised solutions. He has also lectured in Electronics, Electrical Engineering and Digital Systems, at a university level. Rodney feels that people are the most important asset of any organisation and has a qualification in Psychology to complement his Engineering knowledge and experience. Rodney has presented numerous IDC workshops in the United States, England, Ireland, Scotland, Bahrain, United Arab Emirates, Iran, Vietnam, Australia, New Zealand, Malaysia and a great deal of sub-Saharan countries in Africa.

LECTURER Hashemi Ford

BE (Honrs)(Elec) ME(Elec) Principal Engineer

Hashemi has over 20 years international experience in electrical power industry with a focus on modelling, analysis, planning and operation of power systems including distribution, sub-transmission and transmission networks. He has been involved in modelling and analysis of major projects including HVDC interconnectors and Wind farms. Currently Hashemi is working as a Principal Engineer for a power utility in Australia as well as teaching as a part time lecturer for EIT.

LECTURER Behrouz Ghorbanian

BSc, MSc, MIEAust

Behrouz completed his degrees in Telecommunications and Electrical Engineering in 1985 and 1993 respectively, and then concluded his studies in Electrical Utility Engineering at Curtin University (Perth) in 2004. Behrouz started his career in the oil and gas industry where his role got him involved in the maintenance and repair of electronic and navigational marine equipment (VHF and SSB radios, Sat Nav, engine control panels etc). He then moved to the power industry and was involved in the design, installation, and commissioning of substations mainly for consultancies and utilities. He has also established a good reputation in teaching power system protection over his long term services lecturing at Curtin University, and also over the period he worked as a Protection Engineer in New Zealand. Over the past years, Behrouz has been involved in many major projects across Australia (Port Hedland, Barrow Island, Tamar Valley, Karratha, and Newman for example). His most recent experience is related to cost estimation and risk assessment of major substation projects with a special focus on the secondary systems (Protection, COMMS, SCADA). He has also worked as an Engineering Manager and Senior Project Engineer on major copper mine projects overseas. Behrouz has also gained good knowledge in substation design, HV cables sizing and installation, transmission system design, earthing system design and applications, and power system protection design and applications. 12
RTO provider 51971 ACN 135 762 426

ADVANCED DIPLOMA OF ELECTRICAL AND INSTRUMENTATION

(E & I) ENGINEERING FOR OIL AND GAS FACILITIES

International Expert Speaker Faculty

LECTURER John Lawrence
B.Sc (Hons) M.Sc B.Com (Hons)

In today's hyped up world, one is hesitant to describe anyone as 'outstanding', but John Lawrence has distinguished himself over the last 20 years with excellent program reviews. John has 20 years of experience as a project and departmental manager for a multinational oil company, focusing on designing and managing the infrastructure of the telecommunications, data communications and IT systems. In the past 5 years, John has worked extensively for a number of multi-national clients, managing projects including facilities management, budgeting and financial forecasting. When John is not consulting or lecturing, he enjoys increasing his own skills by reading and writing about state-of-the-art technology topics and how to optimise Return On Investment (ROI) for the overall IT infrastructure. John is a dedicated professional who has trained engineers and technicians throughout the world.

LECTURER G. Vijayaraghavan

B.E. (Hons) Electrical

Vijays experience is primarily in the field of industrial power distribution systems. He has contributed to the design, engineering, commissioning and operation of HV distribution equipment in steel industry for over 15 years which includes outdoor switchyards, indoor MV switchgear and distribution substations. He has also been trained in the operation of large captive power plants forming part of integrated steel plant systems. He has worked as the head of testing of protection and HV equipment in a large 4 MTPA integrated steel plant. He has also served as the head of the electrical and instrumentation group for over 2 decades in a firm of consulting engineers handling several large international projects, including the power distribution systems of large metallurgical industries and the integrated power generation plants, the captive thermal power generation unit of an Aluminium smelting and refining complex and Tonnage oxygen plants associated with steel manufacturing, among several others. Vijay has been associated with IDC/EIT for over 10 years and has designed and presented training programs on various topics related to electrical power engineering. Vijay is a popular lecturer his students often seek his advice in analysing and solving technical problems at work, sometimes long after the completion of the program itself.

For more information or to enrol, please contact [email protected]

13

RTO provider 51971 ACN 135 762 426

Module 1: Fundamentals of Electrical Engineering You will learn how to:

Review of fundamental electrical concepts Describe electrical distribution systems as applied to oil and gas

THE PROGRAM
Topic 1.1 OVERVIEW OF POWER SYSTEMS AND GENERATION OF ELECTRIC POWER Historical overview Electricity production and use AC and DC Single and 3 phase AC systems Relation between frequency and poles in a generator Electrical power and energy Active and reactive power Power triangle 3 phase circuit relationships Electrical networks Generation-non renewable and renewable sources Transmission and distribution

fundamentals
Topic 1.2 ELECTRICAL EQUIPMENT FOR POWER TRANSMISSION AND DISTRIBUTION AND RELATED ISSUES Transformers Isolators, fuses and circuit breakers Electrical rotating machines AC and DC Power electronics applications Power quality problems Protection of electrical systems Electrical safety, legislation and compliance issues

Overview
This will give a quick overview of the key areas of electrical engineering. You will review the fundamentals of electricity, alternating current systems, electrical generation, transmission and distribution and the key equipment of electrical systems and also examine the distribution concepts followed in oil and gas industry.

Module 2: Fundamentals of Instrumentation, Measurement and

Process Control Engineering

You will learn how to:

Explain key concepts of industrial automation systems Describe key concepts of Instrumentation and measurement Configure simple PLC systems

THE PROGRAM
Topic 2.1 PROCESS MEASUREMENT: BASICS AND COMMON TYPES INTRODUCTION TO PROCESS MEASUREMENT Basic measurement concepts Definition of terminology PRESSURE MEASUREMENT Principle of pressure measurement Pressure sources Pressure transducers and elements LEVEL MEASUREMENT Principles of level measurement Simple sight glasses Buoyancy tape systems Hydrostatic pressure Ultrasonic measurement Radiation measurement Electrical measurement TEMPERATURE MEASUREMENT Principles Thermocouples Resistance Temperature Detectors (RTDs) Thermistors 14

fundamentals
Topic 2.2 FLOW MEASUREMENT AND BASIC PROCESS CONTROL FLOW MEASUREMENT Principles of flow measurement Open channel, oscillatory and magnetic flow measurement Positive displacement Ultrasonic flow measurement MISCELLANEOUS INSTRUMENTATION CONSIDERATIONS Transmitters, noise, materials of construction FUNDAMENTALS OF LOOP TUNING Processes, controllers and tuning PID controllers - P, I and D modes of operation Load disturbances and offset Speed, stability and robustness Gain, dead time and time constants FUNDAMENTALS OF PLCs Block diagram of typical PLC PLC Processor Module memory organisation Input / output section module types Power Supplies

Overview
This module performs an introductory overview of the key areas of the fast growing area of industrial automation (including instrumentation and control systems) as applied to the oil and gas industry. The topics covered include an introduction to instrumentation and measurement ranging from pressure, level, temperature and flow devices; followed by a review of process control. PLC systems are discussed.

Module 3: Electrical Drawings, Documentation and Schematics You will learn how to:
Apply know-how in the various types of electrical drawings and their applications Show expertise in planning electrical drawings, selecting a proper (paper) size for each type of drawing and the most appropriate scale to be used Apply industry-standard symbols/ representation approach

THE PROGRAM
Topic 3.1 INTRODUCTION TO DRAWINGS, USE OF SYMBOLS AND SCHEMATIC DIAGRAMS Relevance of drawings in engineering Drawings at the center of all activities Types of drawings and application Standards in drawings 2 and 3 dimensional representation Computer aided drafting; an introduction Components of an engineering drawing Scales and sheet sizes Electrotechnology symbols Single line and 3 line diagrams for electrical circuits Control schematics Logic gates and logic diagrams Topic 3.2 DIFFERENT TYPES OF LAYOUTS, 2D/3D DRAWING REPRESENTATIONS AND DRAWING MANAGEMENT Cabling and wiring drawings Layout drawings for different applications P&I diagrams and their importance in process control CAD drawings for 2D and 3D applications Features of CAD and benefits Parametric programming Drawing management Revision control and drawing ownership Drawing process flow Redlining in CAD drawings

electrical engineering

Overview
It is often said that drawing is engineers language. Drawings are used to communicate and share information between different teams of engineers; the design engineer who conceptualises an equipment or system, the production engineer who plans the steps in manufacturing the required components and subsystems, the Assembly engineer who puts the components together, the testing engineer who tests the complete system, the installation engineer who installs the system or equipment and the maintenance engineer who is responsible for its upkeep. To all these engineers with diverse backgrounds and expertise, a drawing should convey precise and identical information. This calls for standardised methodologies, conventions and approach in preparing drawings. This module will cover all these aspects with respect to engineering drawings in general and electrical drawings in particular. Various types of electrical drawings and their application, the steps in planning a drawing, selection of drawing size and scale, use of standardised symbols etc. will be described in detail with commonly used examples from industry practice. Computer Aided Drafting (CAD) has brought about a major change in the way drawings are prepared and has caused a phenomenal improvement in drawing office productivity. No organisation can afford to use the older manual methods of preparing drawings today. Apart from reuse and easy modification of existing drawings to create new ones, complete or partial automated drawing preparation has also become a possibility. The module discusses the advances made in this field and the links between drawings and manufacturing using 3D visualisation tools and computer aided manufacturing (CAM) approach. Use of CAD-CAM tools presents its own challenges in the way drawings are stored, shared between different groups of users and revised for reuse. The module also covers these aspects and takes a look at future possibilities in the way drawings will be used to disseminate information.

Practical Exercises
Reading and interpretation of single line diagrams Reading and interpretation of schematic drawings Reading and interpretation of logic diagrams Reading and interpretation of cabling drawings Reading and interpretation of layout drawings [Inclusion of facilities immediately surrounding the subject being laid out]

15

Module 4: Power Distribution You will learn how to:

Explain practical power distribution fundamentals Explain the intricacies involved in planning power distribution for an industrial facility Determine short-circuit ratings quickly and effectively Assess the influence of fault levels on switchgear ratings Selecting the correct type of in-house generation for critical loads and connection to plant systems

THE PROGRAM
Topic 4.1 DISTRIBUTION SYSTEMS-OVERVIEW AND ALTERNATIVES Typical characteristics of an industrial distribution system Main components of an industrial distribution system Distribution system equipment Electrical safety and power security Voltage classification Voltage levels in a distribution system Types of distribution Typical distribution configuration O&G distribution - special requirements and practices Topic 4.2 DISTRIBUTION SYSTEM PLANNING AND SIZING OF EQUIPMENT System planning approach Data needed for planning Collection of data Studies needed Distribution equipment sizing Load assessment Factors considered Equipment requirements and selection of rating Device coordination (type 1 and 2) Cable sizing Topic 4.3 SHORT CIRCUIT CALCULATION AND ITS APPLICATION What is a fault? Effects of a fault Types of faults Limiting the damaging effects of a fault What is impedance? Impedance in per unit value and its method of calculation. Representing the electrical network as an equivalent diagram Reduction of impedance diagram for calculation of fault currents Concept of base MVA for equivalent circuits Effect of motors on faulted circuits Use of fault current calculation

electrical engineering

Overview
A practical module in power distribution, focusing on medium voltage (1kV-36kV) power considerations, switchgear, and network studies. You will gain technical know how in these areas not covered by university or college programs

Topic 4.4 POWER SUPPLY FOR CRITICAL LOADS Why in-plant generation? Emergency power, standby power Consideration in planning Preferred generation methods in industrial installations Integrating emergency sources with plant distribution Parallel operation of generator with external supply Points to note in parallel operation Typical O&G practices and applications in onshore and offshore facilities

16

Module 5: Power Transformers You will learn how to:

Explain fundamental theory and principles of the operation of power transformers Identify and apply transformers' types Explain power transformers components and their construction Apply power transformer protection Perform power transformers oil and oil tests and interpretation of results Perform the most effective power transformer electrical tests

THE PROGRAM
Topic 5.1 TRANSFORMER THEORY, TYPES, CONSTRUCTION AND CHARACTERISTICS Transformer principle EMF equation of a transformer Vector diagram of transformers Equivalent circuit Impedance and voltage regulation Polarity, vector group and connections Shell type and core type Construction aspects and main components Insulation and cooling Dry type transformers and applications Surge protection, Buchholz relay, pressure relief relay Thermal devices and instruments (oil temperature alarm and trip, winding temperature alarm and trip) Ratings and specifications Topic 5.2 INSTALLATION, MAINTENANCE AND TESTING Electrical schemes and plant layouts Transformer layouts Indoor locations Outdoor installation Core-and-coil assembly Noise considerations Power circuit connections Changes in design parameters Site installation practices Pre-commissioning checks Transformer operation and maintenance Transformer inspection intervals Moisture in transformers Removal of core and assembly Transformer oil analysis - Water, acidity, dissolved gas - Dielectric breakdown, moisture, resistivity, interfacial tension, specific gravity, power factor, furan analysis. - Recovery voltage measurement test

electrical engineering

Overview
Installation of high voltage distribution and transmission equipment has increased significantly over the years due to ongoing global demand for power. As a result, the need to ensure the reliability of operation of power systems is paramount. Power transformers are among the most important and most expensive components of power systems, their failure can impose extraordinarily high costs on plants, factories and utilities of all descriptions. It is critical that all personnel operating and working with such equipment have a sound knowledge of their operational requirements and maintenance. This practical module provides knowledge on both the theory and operation of power transformers. The module will develop and enhance an understanding of what is involved in the maintenance of these essential components of the power systems, through the tips and tricks learnt and developed by some of the world's preeminent electrical engineers.

Testing of transformers - General - Routine tests - Type tests - Special tests - Transformer standards - Tests on parts - Transformer oil tests - On site acceptance tests Recommended transformer field tests and checks Transformer principle

17

Module 6: Switchgear for Power Distribution You will learn how to:
Explain practical power distribution fundamentals Determine short-circuit ratings quickly and effectively Assess the influence of fault levels on switchgear ratings Selecting the correct type of switchgear for the right application

THE PROGRAM
Topic 6.1 MEDIUM AND LOW VOLTAGE SWITCHGEAR Medium voltage switchgear-applications MV switchgear construction Metering, protection and control Topic 6.2 MEDIUM AND LOW VOLTAGE CIRCUIT BREAKERS, DC SUPPLY EQUIPMENT FOR ELECTRICAL SWITCHGEAR Circuit breaker basics Specification and ratings MV and LV circuit breakers Need for DC supply Possible alternatives to DC control Power source for DC supply Batteries - basic principles and common types Battery sizing Battery charging Battery chargers - principle and basic schemes Trip circuit supervision for circuit breakers Substation battery condition and monitoring

electrical engineering

Overview
A practical module in power distribution, focusing on medium voltage (1kV-36kV) and low voltage switchgear. You will gain technical know how in these areas not covered by university or college programs

Module 7: Cables and Wires Maintenance and Installation Practice You will learn how to:
Perform testing and preventative maintenance on power cables Select and install cables Extend life of cables Describe how to splice/joint and terminate cables

THE PROGRAM
Topic 7.1 CABLES - CONSTRUCTION AND SELECTION What is a cable? Cable components Different types of insulation materials and applications Manufacturing Storage and handling Selection of cables Relation between circuit protection and cable sizing Cables for oil and gas applications Topic 7.2 INSTALLATION, TERMINATION AND JOINTING Key installation aspects Storage requirements Type of laying Handling and transportation Unreeling and laying Different types of installation Fire prevention Passive fire protection

electrical engineering

Overview
Faults in underground cable may cause loss of supply to customers and loss of revenue for suppliers so it is imperative that the fault location process is efficient and accurate to minimise excavation time, which results in reducing inconvenience to all concerned. For fault locating to be efficient and accurate technical staff need to have expert knowledge accompanied with experience in order to attain service reliability. This module is designed to ensure that those responsible for the selection, laying, operation, maintenance and monitoring of power cables understands the technical issues involved and comply with relevant specifications and requirements.

Active protection Fire detection Fire alarm Fire extinguishing Cable terminations Indoor and outdoor terminations Equipment terminations Cable joints/splices

18

Module 8: Power System Protection and Co-ordination You will learn how to:
Identify key aspects of the electrical power protection environment Identify and rectify the different fault types Perform simple fault and design calculations

(incl. Fault Calculations/Stability and Protective Relays)

Overview
This module has been designed to give plant operators, electricians, field technicians and engineers a better appreciation of the role played by power protection systems. An understanding of power systems along with correct management will increase your plant efficiency and performance as well as increasing safety for all concerned. The module is designed to provide excellent understanding on both a theoretical and practical level. Starting at a basic level and then moving onto more detailed applications, it features an introduction covering the need for protection, fault types and their effects, simple calculations of short circuit currents and system earthing. This module includes some practical work, simple fault calculations, relay settings and the checking of a current transformer magnetisation curve. Trend towards combining measurement and relaying requirements from common CTs and VTs. Special purpose CTs, e.g. bus-zone and differential protection Issues of modern relays generally requiring much less burden, hence small cable currents can be used e.g. 1 amp instead of 5 amps CIRCUIT BREAKERS Purpose and duty, clearance times, types etc Topic 8.2 FUSES, RELAYS AND BATTERIES FUSE-CONTACTOR COMBINATIONS Purpose and duty, clearance times, types Coordination required by the standards TRIPPING BATTERIES Battery types, chargers, maintenance, DC circuitry closing, tripping, spring charging, indication and protective relay requirements for AC or DC supplies, detection of loss of auxiliary supplied, dual redundancy RELAYS Inverse, definite minimum time (IDMT) relay construction principles and setting Calculation of settings practical examples New era modern numerical relays and future trends Understanding modern notation PRACTICAL DEMONSTRATION SESSION Including simple fault calculations, relay settings and checking a current transformer, magnetising curve etc APPLICATIONS CO-ORDINATED BY TIME GRADING Problems in applying IDMT relays Topic 8.3 PROTECTION TYPES PRINCIPLES OF UNIT PROTECTION Differential protection basic principles FEEDER PROTECTION Cables, pilot wire differential, overhead lines 19 Distance protection (basic principles, characteristics , various schemes) TRANSFORMER PROTECTION Phase shift, magnetising in-rush, inter-turn, core and tank faults Differential and restricted earth fault schemes Buchholz relay, oil and winding temperature Oil testing and gas analysis SWITCHGEAR (BUS BAR) PROTECTION Requirements, zones, types Frame leakage, high, medium and low impedance schemes, reverse blocking MOTOR PROTECTION Thermal overload, time constants, early relays Starting and stalling conditions Unbalanced supply voltages, negative sequence currents, de-rating factors Phase-phase faults Earth faults core balance, residual stabilising resistors GENERATOR PROTECTION Stator and rotor faults Overload and over-voltage Reverse power/unbalanced loading Loss of excitation and synchronism Typical protection scheme for indutrial generators OVERHEAD LINE PROTECTION Basic principles of the distance relay Tripping characteristics Application onto power lines Effect of load current and arc resistance Various schemes using power line carrier MANAGEMENT OF PROTECTION Routine testing, annual testing, investigation and performance assessment, up-grading Organisation, training, records, access planning

electrical engineering

THE PROGRAM
Topic 8.1 FUNDAMENTALS NEED FOR PROTECTION Selectivity, stability, sensitivity, speed Reliability, dependability, security FAULT TYPES AND THEIR EFFECTS Active, incipient, passive, transient, asymmetrical, etc Phase and earth faults SIMPLE CALCULATION OF SHORT CIRCUIT CURRENTS Revision of simple formulae RMS and instantaneous, high-set, components Calculation of short circuit MVA and fault currents Faults close to generators, DC off-set and its effect on circuit breaker rating Worked examples SYSTEM EARTHING/GROUNDING Solid, impedance, touch potentials etc Effect of electric shock on human beings Earth leakage protection Limitation due to grounding/earthing circuit impedance involving the cable armour (incl. obtaining cable armouring impedance data) PROTECTION SYSTEM COMPONENTS INCL. FUSES History, construction, characteristics Energy, let-through, application Notations used in standards and by manufacturers INSTRUMENT TRANSFORMERS Current transformers: Construction, performance, specification, magnetisation, curves etc Voltage transformers: types, accuracy, connections

Module 9: Electrical Safety and Grounding/Earthing*, Bonding

and Lightning Protection

You will learn how to:

Describe best practice in grounding/earthing and its role in safety Evaluate safety against arc flash and take steps to mitigate danger by proper design, operation and maintenance Ensure lightning protection of structures, onshore and offshore facilities Design electrical and electronic systems correctly by applying knowledge of grounding/ earthing principles

THE PROGRAM
Topic 9.1 PRINCIPLES OF EARTHING Major electrical safety hazards Earthing definitions Different objectives of earthing System earthing Types adopted Unearthed systems Comparison of solid earthing, resistance earthing Objectives of protective earthing Electric shock Touch and step voltage Sizing of earthing conductors Equipotential bonding Supply system classifications; TN, TT and IT Earth fault sensing Onshore and offshore earthing examples Basics of earth electrodes Soil resistivity Enhancement measures Resistivity measurements Electrode configurations Chemical electrodes Corrosion and maintenance practices Topic 9.2 ARC FLASH AND MITIGATION Arc flash - a major hazard of electricity Definitions of terms Arc hazards Bolted fault current and arc current The three degrees of burns Causes of arc faults Arc effects Burn injuries and impact Arc flash probability Arc flash protection program Hazard assessment Calculations as per IEEE 1584 Incident energy and flash protection boundary Hazard Risk category Minimizing arc fault incidents through maintenance practices Arc containment measures Warning labels Fault current time reduction through better protection Selection of PPE and classes Topic 9.3 ELECTRICAL SAFETY PRINCIPLES Safety through design-objectives Electric shock prevention Insulation and its role Insulation failures-reasons Enclosures Obstacles/shrouding Placing beyond reach Safe clearances from live components Fire hazards Basic rules; avoid, contain, sense, extinguish Fire protection of electrical equipment Electrical safety through isolation Isolation and switching - What is the difference?

electrical engineering
Earthing Safety interlocks Equipment selection Hazards during operation and maintenance Main indicators of problems Safety precautions during operation and maintenance Isolation and earthing as a safety measure Locking and tagging Switchyards-special safety measures Gas safety Safety legislation Organisational measures Safety policy Accident reporting and investigation Record keeping

Overview
Electrical earthing plays a vital role in safety of personnel and equipment. This module explains the basics of earthing in a simple way so that its safety in oil and gas installations can be assured by correct application of the first principles. Electrical safety is an extensively legislated subject as the handling of electrical equipment has several inherent hazards. A brief overview of electrical safety legislation will also be given. It is well established that lightning is the second most dangerous of all natural phenomena, (the first being flash floods) based on reported fatalities on a long-term average basis. Lightning can also cause extensive damage when it strikes buildings and facilities. Equipment failures and disruption of services on account of lightning strikes on electrical lines and substations is a matter of constant worry to T&D system managers. Protection of structures by lightning protection systems and electrical lines and substations by shield are discussed in elaborate detail as well
* The terms grounding and earthing are understood to be interchangeable in this course but due to the larger readership the term earthing has been the preferred usage. Our apologies to our North American readers for this unfortunate compromise.

Topic 9.4 LIGHTNING PROTECTION OF STRUCTURES AND OTHER INSTALLATIONS Basics of lightning and lightning protection Lightning physics Lightning effects: electrical, thermal and mechanical Direct and indirect effects Hazard assessment IEC 61662 ans AS 1768 Types of damage and risk levels protection basics and protection levels Protection design Zone of protection and evaluation methods Cone of protection and improvements application to Franklin Rod type protection Rolling sphere method as applied to mesh type protection Air terminals Down conductors Earth electrodes Side flash-Inhibition by isolation or bonding Non conventional protection and pitfalls Protection of electrical lines and substations Topic 9.4B DIESEL ENGINES FOR STANDBY POWER Need for Emergency Generators in Oil and Gas Industry Theory of IC engines-Technology and classifications Diesel Engine internals Engine ratings and characteristics Efficiency enhancement Turbo chargers and after-coolers Water pre-heating Diesel Generator package Topic 9.4C BATTERIES FOR DC SUPPLY FOR CRITICAL SERVICES Need for uninterrupted power supply in industry Battery types Charging of batteries Semiconductors as rectifiers and inverters Battery sizing Battery installation/maintenance Failure and disposal

20

RTO provider 51971 ACN 135 762 426

Module 10: Power Quality, Uninterruptible Power Supplies (UPSs),

Surge Protection and Noise (EMI/EMC) Control

THE PROGRAM
Topic 10.1 INTRODUCTION TO POWER QUALITY AND DEALING WITH VOLTAGE VARIATIONS/ INTERRUPTIONS Definition of power quality Important quality aspects Why do electrical parameters vary? Typical power quality issues in practical systems Need for continuity of power supply Effect of interruptions on production and safety Direct and indirect costs Voltage variation and reasons Sag effects Swell effects Sensitivity curves Mitigation approaches Topic 10.2 SURGE PROTECTION Surge coupling Resistive, inductive and capacitive coupling Surge mitigation Bonding of earthing systems Basic principle of surge protection Surge protection devices Basic types of SPD Voltage limiting type Voltage switching type Differences Application Graded surge protection Surge protection zones as per IEC SPD selection criteria Special considerations Typical protection for control loops Importance of correct earthing practices for sensitive equipment Topic 10.3 HARMONICS AND NOISE Meaning of harmonics Linear loads Non linear loads Magnetic saturation and its effect Electronic switching and effects Typical waveforms of switch mode power supplies Harmonic components and Fourier transforms Non linear loads as harmonic current sources Problems cause by harmonics in rotating machines Problems due to zero crossing changes 21

You will learn how to:

Develop a sound working knowledge of earthing and harmonics Protect equipment from surge and transient protection Design electrical and electronic systems correctly by applying knowledge of harmonics and earthing principles Describe applications for the latest technologies in correcting earthing, harmonics, surge, and transient problems Troubleshoot electrical and electronic system problems arising from poor power quality Isolate and rectify power quality problems

electrical engineering

Overview
Supplying reliable electric power for critical systems is an essential part of modern industrial installations. Very often, the supply received from a distribution network has quality issues such as voltage sags/swells, transients, harmonics and interruptions. While it is impossible to guarantee 100% availability of power at all points in any system, vulnerable sections can be provided with alternative emergency power supply to ensure more reliable power availability, thereby avoiding the problems of power interruption. Measures against power interruptions, voltage variations, transients and harmonics will be discussed in this module.

Problems due to tripleN harmonics Problems in measurements Voltage distortion by harmonic currents Controlling harmonics by decoupling Controlling by rectifier configuration and phase shifting Controlling harmonics by filters Passive filters and their constraints Active filters Noise and sources of electrical noise Effects on sensitive circuits (S/N ratio) Common mode noise Differential mode noise Coupling of noise between circuits Avoiding resistive coupling by balanced signal circuits Capacitive coupling Mitigation by electrostatic screening EM coupling Shielding against EMI Twisted signal conductors Optical coupling Isolation transformers to reduce noise

Topic 10.4 PF COMPENSATION AND PQ STUDIES Active and reactive power Problems due to high reactive power Shunt capacitors for reduction of reactive power Synchronous compensators Series capacitors in transmission and distribution networks Compare parallel and series capacitors Dynamic compensation Applications of SVC (Static VAR Compensators) Power quality issues commonly found Normally adopted solutions Power quality studies Objectives of a study General Areas Levels of study as per IEEE 1100 Level 1 study - objectives Aspects studied in level 1 Level 2 study objectives Aspects studied in level 2 Level 3 study and objectives Instruments used

Module 11: Troubleshooting, Maintenance and Protection of AC Electrical

Motors and Variable (or Adjustable) Speed Drives (VSDs) for Instrumentation and Control Systems
THE PROGRAM
Topic 11.1 FUNDAMENTALS OF MOTOR TECHNOLOGY, AC MOTOR THEORY, CONSTRUCTION AND MAINTENANCE Efficiency, torque, inertia, horsepower/ power factor Torque-speed curves Basic construction and physical configuration, windings Principles of operation and performance Topic 11.2 THREE PHASE AC INDUCTION MOTORS THREE PHASE AC INDUCTION MOTORS Components and theory of operation Induction motor design Duty cycles, insulation and cooling requirements Starting and selecting methods DETERMINATION OF LOSSES AND EFFICIENCY Standards and losses Tests for measurement and computation of losses and efficiency Dynamometers Principles of load application by braking Torque measurement basics PROTECTION Thermal overload, over current / overload Under-voltage / over-voltage Under frequency Current unbalance or negative phase sequence Earth fault protection Pole slip / out of step Loss of excitation Inadvertent energization Topic 11.3 INTRODUCTION TO VARIABLE SPEED DRIVES and 3 PHASE AC INDUCTION MOTORS VARIABLE SPEED DRIVES (VSDs) Types and principles of speed control Efficiency, torque, inertia, horsepower/ power factor Calculating induction motor run-up Torque -speed curves Influence of varying frequency and applied voltage Effects of harmonics in induction motors Control of air-gap flux density

You will learn how to:

Describe AC motor operation and construction Specify, select and install motors Specify protection requirements for motors Specify speed control requirements for motors Fix faults on motors Improve plant safety Describe how AC Variable Speed Drives (VSDs) work Install VSDs properly Troubleshoot VSDs

electrical engineering
3 PHASE AC INDUCTION MOTORS Types and principles of speed control Efficiency, torque, inertia, horsepower/power factor Calculating induction motor run-up Torque -speed curves Influence of varying frequency and applied voltage Effects of harmonics in induction motors Control of air-gap flux density MISCELLANEOUS TOPICS Non-hazardous and hazardous types Hazardous type certificates and label markings Inertia and torque-speed curves Topic 11.4 POWER ELECTRONIC CONVERTERS, ELECTROMAGNETIC COMPATIBILITY (EMC), PROTECTION POWER ELECTRONIC CONVERTERS Power electronic and inverters Gate commutated converters and gate controlled devices 6, 12 and 24-pulse systems PWM rectifier for AC converters Soft switching ELECTROMAGNETIC COMPATIBILITY (EMC) Electromagnetic interference Effect of harmonic distortion Thermal Overload Protection PROTECTION OF MOTORS AND CONVERTERS AC frequency converter protection Fault diagnostics Electric motor and thermal overload protection Topic 11.5 AC VARIABLE SPEED DRIVES, INSTALLATION AND FAULT FINDING TECHNIQUES CONTROL SYSTEM FOR AC VARIABLE SPEED DRIVES Power supply and VSD control loops Vector control Current Feedback and speed feedback THE SELECTION OF AC CONVERTERS FOR VARIABLE SPEED DRIVE APPLICATIONS Operation in the constant power region Nature of the machine Load Starting and stopping VSDs Calculating acceleration torques and times INSTALLATION AND FAULT FINDING TECHNIQUES General installation and environmental requirements Installing contactors and AC converters

Overview
It is estimated that electrical drives and other rotating equipment consume about 50% of the total electrical energy consumed in the world today. The cost of maintaining electrical motors can be a significant amount in the budget item of manufacturing and mining industries. This module gives you a thorough understanding of electrical motors working, maintenance and failure modes and gives you the tools to maintain and troubleshoot electrical motors. This module gives you a fundamental understanding of the installation, operation and troubleshooting of variable speed drives. Typical practical applications of VSDs in process control and materials handling, such as those for pumping, ventilation, conveyers, compressors and hoists are covered in detail.

22

Module 12: Electrical Equipment in Hazardous Areas You will learn how to:
Demonstrate a good understanding of the basic hazards associated with electricity near flammable gases and vapours Design and install safe working systems in hazardous areas Perform simple classifications of hazardous areas Detail the types of apparatus that can be used in a given hazardous area Describe the system limitations in using hazardous areas protection Detail the key areas of the national Codes of Practice

THE PROGRAM
Topic 12.1 INTRODUCTION TO CLASSIFICATION PRINCIPLES INTRODUCTION Accidents and explosion consequences Definition of hazardous area Introduction to standards, testing Authorities and equipment certification FLAMMABILITY CHARACTERISTICS Properties of flammable gases Ignition sources Use of electricity Protection requirements AREA CLASSIFICATION Definitions Risk assessment Normal and abnormal plant operation Sources of release Assessment procedures Ventilation consideration Zoning principles Examples Documentation EQUIPMENT CLASSIFICATION SYSTEMS Classification of apparatus Equipment grouping and temperature rating Labeling on equipment Overview of types of protection and comparison Topic 12.2 PRINCIPLES OF TYPES OF PROTECTION EXPLOSION PROTECTION CONCEPTS Definition, principles and applications FLAMEPROOF CONCEPT Ex d Flamepath attributes as part of enclosure design INCREASED SAFETY CONCEPT Ex e High integrity connection and insulation quality NON SPARKING CONCEPT Ex n Basic protection for zone 2 only INTRINSIC SAFETY CONCEPT Ex i Systems approach useful for instrumentation circuits PRESSURISATION CONCEPT Ex p Artificial safe area creation permits wide variety of applications OTHER TYPES OF PROTECTION; Lesser known types: Ex o, q, m and s Advantages and limitations COMBINED PROTECTION Using combinations of protection to solve application problems

electrical engineering

Overview
During the phases of extraction and processing, prior to eventual use as fuels or feed-stocks, the oil and gas industry handles ignitable substances; inadvertent combustion can and has caused major disasters and loss of life. This practical module provides instruction on how explosion protection is applied. It looks at hazardous area terminology, together with the many basic principles involved and some applications to explain the subject. The processes of area classification of plant design are introduced by examining the characteristics of flammable gasses and vapours. This forms the basis of the classification systems for equipment (i.e. grouping and temperature rating) such that suitably rated equipment can be selected for a given hazard. Thereafter, the requirements of installation, operation, inspection and maintenance aspects of such equipment used in hazardous areas are explained. The information is taken from the harmonised International Standard Series IEC60079. Engineers in this industry must understand the workings of explosion protection systems and how they are implemented with respect to process plant, control and instrumentation and other electrical equipment. This is so that safety is designed into the process plant and is managed technically and organizationally for its operational life.

Topic 12.3 INSTALLER AND USER PRACTICES EARTHING AND BONDING Basic terminology and principles Reasons for good earthing practice Fault current routing consideration Noise and interference control for instrumentation Static discharge paths Lightning and surge protection Electric shock, step and touch potentials, IEEE 80 SELECTION AND INSTALLATION OF EX EQUIPMENT Equipment selection criteria Documentation requirements Structure of code of practice Precautionary requirements Cabling requirements INSPECTION AND MAINTENANCE OF EX EQUIPMENT Types of inspection Integration with planned maintenance Procedures Key activities Repair of equipment STANDARDS, CERTIFICATION, MARKING, AND THE ATEX DIRECTIVE Summary of standards and codes of practice Summary of certification Scope of directive Conformity verification

23

Module 13: Electrical Applications to an Oil and Gas Platform and Site You will learn how to:
Consider all electrical problems holistically combining elements of grounding/earthing/ protection/hazardous areas/switchgear Work in groups drawing on each other experience in solving four case studies Four case studies will be undertaken on applications of the various modules in the electrical section.

THE PROGRAM
Topic 13.1 CASE STUDIES INVOLVING SUSTAINABLE ENERGY AND HARMONIC PROBLEM SOLVING Meaning of sustainability Fundamental principles Sustainability indicators Applicability of sustainability to industrial activities Sustainability in oil and gas terms Case study: power source of Yokon Mines and reason for selecting natural gas Case study; LNG plant in Yemen, selection of motors for LNG gas compressor drives Case study: harmonic resonance in an industrial system Case study: cable ship harmonic problem Case study: harmonic problem in offshore platform Topic 13.2 CASE STUDIES INVOLVING HAZARDS DUE TO NATURAL FACTORS LIKE LIGHTNING AND PREVENTION OF ACCIDENTS Fires in oil installations Case study on refinery fire Case study on oil rig fire Case study on a major refinery fire Case study of fire in an Egyptian oil processing plant Lightning as a source of fires Reduction of hazards Static electricity as a source of fires Control of static electricity Static problem areas in oil and gas industry Special situations needing attention

electrical engineering

24

Module 14: General Instrumentation Standards in Oil and Gas and

Best Practice in Process, Electrical & Instrumentation Drawings and Documentation

THE PROGRAM
Topic 14.1 DRAWING TYPES AND STANDARDS AND FUNDAMENTALS INTRODUCTION The role of plant documentation, standards and specifications DRAWING TYPES and STANDARDS Who sets the standards (ISA, IEC, ISO) Understanding diagram layouts and formats. Cross references ISO 9002 and document control API RP14F Section 12.2 electronic instrumentation ISA Standards Library for Automation and Control Specification forms ISA S20 specification forms for process measurement and control FUNDAMENTALS Relays Transducers Switches Gate logic Fail safe design Topic 14.2 PIPING AND INSTRUMENT DIAGRAMS (P&ID), INSTRUMENTATION AND ELECTRICAL PIPING AND INSTRUMENT DIAGRAMS (P&ID) Process flow diagrams An introduction to the PFD, P&ID, UFD, MFD Control loops on the P&ID HAZOP Mass balance Functional spec INSTRUMENTATION Document types Instrument lists Logic diagrams Wiring diagrams Indexes Schedules and lists Block diagrams Data sheets Loop diagrams Hands on circuit function Fault finding Standards and symbols Nomenclature

You will learn how to:

Demonstrate an understanding of the different national and international standards used in the oil and sector ranging from those of ISA to IEC. Integrate these standards into your engineering design and installation work Commence the instrumentation section of the advanced diploma effectively Oil and gas standards in electrical and instrumentation Summary of instrumentation topics to be covered Work with process flow diagrams, P&IDs, instrument lists, specification forms, logic diagrams, location plans, installation details and instrument loop diagrams, instrument hook ups and other design documentation Describe process control devices and the symbols used to define them Specify vendor criteria for the production of plant documentation to the order of the company Describe the appropriate ISA standards available to assist in developing and understanding instrument and control documents

instrumentation and control

ELECTRICAL Electrical standards Electrical document types Main circuits Control circuits Symbols Nomenclature Hands on determine function, fault-finding Topic 14.3 PNEUMATICS & HYDRAULICS, LADDER LOGIC AND ELECTRO PNEUMATIC CIRCUITS PNEUMATICS & HYDRAULICS Introduction Standards Layout and symbols Basic circuits Deducing principle of operation Hands on session LADDER LOGIC Introduction and overview Standards and layout Power supply circuits Hands on circuit design ELECTRO PNEUMATIC CIRCUITS Overview Truth tables Fault finding Principle of operation PRACTICAL EXERCISES DURING THE MODULE Develop basic Hydraulic, instrumentation and pneumatic drawings Develop P&ID drawings for pressure, temperature, flow and level loops Detail the documentation for typical instruments Proceed through development of a full plant set of drawings from flow diagrams and process description to P&ID, electrical, Hydraulic and pneumatic symbols Use software to undertake these typical tasks INSTRUMENTATION ACRONYMS A list of common acronyms (eg. P&ID)

Overview
The module will serve as an introduction to the local, national and international standards used in the oil and gas field. This module is designed for engineers and technicians from a wide range of abilities and backgrounds and will provide an excellent introduction to mastering plant documentation and diagrams, covers the flow of documentation from design through manufacture to maintenance and operations. The module looks at the applications of each diagram type detailing where and when the document should be used. During the life span of any plant, a multitude of different vendors will supply plant modifications and equipment as the plant is continuously enhanced. The quality of the documentation produced will vary enormously with each new supplier. You will be given the skills to apply a standardised internationally acceptable set of standards to your plant documentation.

25

Module 15: Process Instrumentation You will learn how to:

Specify and design instrumentation systems for pressure, level, temperature, flow and other process/plant parameters Correctly select and size control valves for industrial use Predict and avoid the problems with installing measurement equipment Troubleshoot instrumentation systems and control valves Describe most of the major technologies used for instrumentation and control valves

Overview
A clear understanding and application of instrument design, specification , selection, commissioning and maintenance principles is the most important factor in an efficient process system. True control of a processes can only be achieved when instrumentation provides the correct information.. This module focuses on real applications, with attention to special installation considerations and application limitations when selecting or installing different measurement or control equipment.

instrumentation and control

THE PROGRAM
Topic 15.1 INTRODUCTION TO PROCESS MEASUREMENT Basic measurement concepts Definition of terminology Measuring instruments and control valves as part of the overall control system Pressure, level, temperature and flow overview Overview of control valves Instrument tubing, fittings and accessories Pneumatic instrumentation systems Hydraulic instrumentation and controls Essential safety considerations Instrumentation process interface Double block and bleed valves Monoflanges and instrument manifolds Process close coupling techniques Topic 15.2 PRESSURE MEASUREMENT Principle of pressure measurement Load cells Pressure sources Pressure transducers, transmitters, gauges, indicators, switches, elements and accessories Specifications Pressure relief valves, rupture discs Installation considerations Impact on the overall control loop Future technologies Topic 15.3 LEVEL MEASUREMENT Principles of level measurement Simple sight glasses Level gauges Bubbler systems Displacer Differential systems, with and without capillary seals Magnetic float type (preferred for offshore applications due to high integrity & adaptability) Capacitance Nucleonic Buoyancy tape systems

Hydrostatic pressure Radar and microwave Ultrasonic measurement Radiation measurement Electrical measurement Density measurement Fiscal measurement of level Profiling techniques Level transmitters Level calculations Elevation and suppression Reference legs Level switches Tank gauging equipment Installation considerations Impact on the overall control loop Future technologies

Design Basic considerations. Positive displacement Ultrasonic flow measurement Mass flow measurement Installation considerations - Impact on the overall control loop Allocation and fiscal flowmetering Flare gas flowmeters Coriolis mass flow meters Thermal dispersion mass flow meters Wet gas metering Multiphase flowmeters Meter Provers

Topic 15.4 TEMPERATURE MEASUREMENT Principles Thermowells Temperature transmitters Natural frequency and vibration checks Thermocouples Resistance Temperature Detectors (RTDs) Thermistors Liquid in glass, filled, bimetallic Pyrometers Installation considerations Impact on the overall control loop Topic 15.5 FLOW MEASUREMENT Principles of flow measurement Flow calculations, standards, straight lengths etc. basic considerations Open channel flow measurement Oscillatory flow measurement Vortex flow meters Orifice plates DP transmitters Pitot tubes annubars Turbine meters Magnetic flowmeters K factors 26

Topic 15.6 CONTROL VALVES Principles of control valves Control valve types: globe valves, cage valves, butterfly valves, ball valves Control valves selection Control valve bodies (practical session) Control valves characteristics/trim Control valve noise and cavitation Actuators and positioners operation Valve calibration and stroking Installation considerations Impact on the overall control loop Future technologies (practical session) Topic 15.7 PROCESS CONSIDERATIONS Transmitters Noise, materials of construction Topic 15.8 INTEGRATION OF THE SYSTEM Tank farm Instrumentation Calculation of individual instrument error and total error for the system Integration of the pressure, level, temperature and flow systems Integration of new smart subsystems with data communication links - Testing and commissioning of the subsystems

Module 16: Calibration, Installation and Maintenance of Instruments You will learn how to:
Apply correct practice to installation, calibration and maintenance of instruments Calibrate electronic transmitters and controllers Configure instruments correctly to vendor instruction sheets Specify instrument and loop documentation requirements and standards to vendors Fault find with drawings Carry out simple repair procedures for the correction of faults on instrument systems where possible

THE PROGRAM
Topic 16.1 INSTRUMENTATION BASICS, HARDWARE & TEST EQUIPMENT MAINTENANCE Corrective/preventative/ predictive Troubleshooting Meaning of ISO 9000 and 9001 ELECTRICAL MEASUREMENTS Use of multimeters and calibrators Voltage/current and resistance measurement Analog and digital meters Oscilloscopes Current to voltage conversion Multiple loop devices Diodes and resistors Soldering and component preparation Open and short circuits Testing of diodes/DIACS/TRIACS/ Components out of tolerance Isolation and grounding/earthing INSTRUMENT PERFORMANCE Basic measurement and control concepts Accuracy/range/hysteresis/linearity/ repeatability/response/dead time Zero/span Process dynamics Specifications CALIBRATION PRINCIPLES Block diagrams Standards for calibration Five point calibration Charts FUNDAMENTALS OF PROCESS MEASUREMENT Basic measurement concepts Definition of terminology Measuring instruments and control valves as part of the overall control system Pressure, level, temperature and flow overview Overview of control valves CALIBRATION OF TRANSMITTERS Shop calibration Electro pneumatic calibrators In-shop or field Temperature calibration (RTD/ thermocouples) PID CONTROLLERS Direct/reverse acting P&ID Control Spanning and range Instrument/controller and process gains SMART AND FIELD BUS TRANSMITTERS Operation Configuration Rearranging 27

instrumentation and control

Characteristics Trimming TRANSDUCERS AND TRANSMITTERS Fundamentals Calibration Interfacing to instrument INSTRUMENT DOCUMENTATION AND P&IDs Control loops on the P&ID Instrument lists Wiring diagrams Schedules and lists Data sheets Loop diagrams Standards and symbols Topic 16.2 STANDARDS, CALIBRATION & PID CONTROL STANDARDS, CERTIFICATION, MARKING AND APPROVAL Authorities Marking and identification Apparatus certification INTEGRATION OF THE SYSTEM Calculation of individual instrument error and total error for the system Integration of the pressure, level, temperature and flow systems Integration of new smart subsystems with data communication links Procedures Testing and commissioning Start up BASIC MEASUREMENTS Measure and troubleshoot voltage, current, resistance problems Open and Short circuit tips and tricks SIMULATION The basis of signal simulation Transmitter simulation Transducer simulation CALIBRATION The basis of transmitter calibration Zero and span adjustment Performance accuracy and error calculations FIELD BUS AND DIGITAL TRANSMITTER Configure Rearrange Perform digital trim PID FEEDBACK LOOPS Wire up and install a PID feedback loop Check the loop out Tune the loop

Overview
This module is designed for engineers and technicians from a wide range of abilities and backgrounds and will provide an excellent introduction and hands-on experience in installation, calibration, commissioning and maintenance of electronic instrumentation. The module is initiated with coverage of the basics on electrical measurements and some tips and tricks. Instrument performance and calibration principles are then covered with rules for calibrating transmitters. Hereafter the procedures for calibrating and installing smart transmitters are covered. Typical documentation requirements for instruments are examined with a focus on instrument data sheets, P&IDs and wiring diagrams. During the life span of any plant, a multitude of different vendors will supply plant modifications and equipment as the plant is continuously enhanced. The quality of the documentation produced will vary enormously with each new supplier. Instruments in hazardous areas are then detailed. The module is then finalised with a discussion on integration of the entire system and testing and commissioning procedures for instruments detailed.

Module 17: Process Control Basics, Control Valves Sizing, Selection

and Maintenance (incl. Pressure Relief Valves)

Overview
This module covers all the essentials of process control and tools to optimise the operation of your plant and process, including the ability to perform effective loop tuning. This module is aimed at engineers and technicians who wish to have a clear, practical understanding of the essentials of process control and loop tuning, as well as how to optimise the operation of their particular plant or process. These persons would typically be primarily involved in the design, implementation and upgrading of industrial control systems. Mathematical theory has been kept to a minimum with the emphasis throughout on practical applications and useful information. It is claimed that the majority of control valves throughout the world have not been correctly

You will learn how to:

Define the fundamentals of process control and new techniques Tune PID control loops Correct stability problems Configure cascade loops, feed forward control and ratio control Identify and correct problems with dead time in the process Define what happens inside a control valve from basic fluid mechanics point of view Appreciate the difference between cavitation and flashing, and know what choked flow is Do simple calculations to determine CV values Recognise severe service applications and have an appreciation for the methods of tacking the problems associated with such applications Know about all the different types of control valves commonly in use and understand the relative advantages of each Choose between different characteristics on offer and specify seat leakage rates Be able to size actuators for linear and rotary applications and know the relative advantages of pneumatic, hydraulic and electric types. Have a basic understanding on how to select materials for bodies, trims, packing boxes, and gaskets Make use of a computer sizing program to assist with the selection of control valves Understand the failure modes for control valves and demonstrate new approaches to trouble shooting

instrumentation and control

sized and that large numbers operate on manual mode. Whether this is true or not is difficult to establish but we do know that the method of sizing and selecting a control valve for a specific application is generally not well understood. Although there are many factors that need to be taken into account the subject is not difficult to understand if dealt with in a logical manner. We also find that many maintenance problems result from people treating the symptoms of a problem rather than tackling the true cause a basic understanding of the principles is all that is usually needed to solve the problem for good.

THE PROGRAM
Topic 17.1 PRACTICAL PROCESS CONTROL INTRODUCTION, INSTRUMENTATION BASICS, AND CONTROL VALVE INTRODUCTORY CONCEPTS Basic control concepts Introduction to sensors and transmitters Introduction to control valves Basic principles of control systems Topic 17.2 PRACTICAL PROCESS CONTROL PRINCIPLES AND LOOP TUNING Stability and control modes of closed loops Digital control principles Ideal PID vs real PID Tuning of closed loop control Cascade control Topic 17.3 PRACTICAL ADVANCED CONTROL CONCEPTS AND SYSTEMS Feed forward control Combined feedback and feed forward control Long dead-time in closed loop control Expert system and model based self tuning controllers Topic 17.4 PRACTICAL CONTROL VALVE ESSENTIALS AND CAPABILITIES Introduction to control valve theory Different types of control valves Characteristics High pressure drop applications Topic 17.5 PRACTICAL SIZING OF CONTROL VALVES, ACTUATION AND ESSENTIAL ACCESORIES Use of computer programs for valve sizing Examples of high pressure drop applications Actuators Positioners Pneumatic circuits Topic 17.6 PRACTICAL CONTROL VALVE MATERIAL, STANDARDS, APPLICATIONS, MAINTENANCE AND INSTALLATION Materials Quality standards Severe service applications Pressure relief valves Installation / maintenance

28

Module 18: Programmable Logic Controllers You will learn how to:
Specify PLC hardware and installation criteria Describe PLC software structure Write medium level PLC programs (using ladderlogic) Troubleshoot a typical PLC system Specify PLC systems

Overview
This module is designed to benefit you with practical up-to-date information on the application of PLCs to the automation and process control of plants and factories. It is suitable for people who have little or no exposure to PLCs, but expect to become involved in some or all aspects of PLC installation. It aims to give practical advice from experts in the field, to assist you to correctly plan, program and install a PLC with a shorter learning curve and more confidence. While the module is ideal for electricians, technicians and engineers who are new to PLCs, much of the module and additional material in the extensive manual will be of value to those who already have some basic Bit shift / rotate Table functions Register (matrix) logic functions Topic 18.2 APPLICATION SOFTWARE & ADVANCED CONTROL GOOD PROGRAMMING HABITS Keeping track of addresses and data used Looking ahead how will programs be maintained Practical methods to improve program quality - Organisation of code, through documentation, simplifying changes GOOD INSTALLATION PRACTICE Location of hardware Good wiring practice - Cable spacing - Power distribution - Wire numbering Reducing noise and interference Screening and shielding ADVANCED CONTROL WITH PLCS The concept of reusable logic - examples: drive logic, alarm handling Use of advanced programming functions Matrix logic Table functions and indirect addressing EXAMPLES: SIMPLE DISPLAY DRIVER BATCH PROCESSES AND SEQUENTIAL CONTROL Remembering the program state Creating a stepper Step advance Fault detection and recovery Operator Intervention Multiple recipes or alternate paths Sequential function charts PID CONTROL The importance of timing and scan time When PID is not always appropriate: - intermittent measurements - long transport delays

instrumentation and control

skills, but need a wider perspective for larger and more challenging tasks ahead. The information contained in this module advances from the basics to challenge even the most experienced engineer in the industry today.

THE PROGRAM
Topic 18.1 PROGRAMMABLE LOGIC CONTROLLERS (PLCs) Introduction to PLCs A brief history of PLCs Alternative control systems where do PLCs fit in? Why PLCs have become so widely accepted Lingering concerns about PLCs FUNDAMENTALS OF PLC HARDWARE Block diagram of typical PLC PLC processor module memory organisation Input / output section module types Power supplies FUNDAMENTALS OF PLC SOFTWARE Methods of representing logic - Boolean algebra - Instruction code - Graphical presentation - Functional logic diagrams - Ladder logic Fundamental ladder logic instruction set Comparison of different manufacturers - Memory and data representation - Instruction code USING LADDER LOGIC FOR SIMPLE DIGITAL FUNCTIONS The basic rules Comparison with relay ladder diagrams The concept of the scan and how to apply it Infinite fan-out Contact normal states Positive and negative logic Basic Boolean functions The usefulness of De Morgans Law USING REGISTERS (WORDS) Number systems Types of register data Timers Counters

Topic 18.3 SAFETY CONTROLLERS, PROGRAMMING STANDARDS & COMMUNICATIONS SAFETY PROGRAMMABLE SYSTEMS Why regular PLCs should not be used for safety functions Programmable electronic logic solvers Safety certification Certified programming systems Application examples Growth of networked safety devices and certified networks Integrated safety systems DATA COMMUNICATIONS Interface standards, RS-232, RS-422/423, RS-485 Protocols, Modbus & DH+ Local area networks, Ethernet and Token Bus Monitoring communication links and simple watchdog timers INTRODUCTION TO IEC 61131-3 Concepts Common elements Programming languages: structured text Function block diagrams Ladder diagrams Instruction list Sequential function chart OPC Introduction to OPC What is OPC? Architecture SYSTEM CHECKOUT AND TESTING Development and verification of code Factory acceptance testing Testing procedures Emulating missing hardware Emulating process responses

29

Module 19: SCADA Systems and Distributed Control Systems You will learn how to:
Describe the fundamentals of SCADA systems List the essentials of SCADA software configuration Apply the tricks and tips in installation of SCADA systems Describe the essentials of telecommunications links Apply Industrial Ethernet in SCADA systems Apply SCADA network security issues Troubleshoot SCADA systems Describe the architecture and operation of Distributed Control systems Design the overall DCS and process control system Specify, select and install DCSs Apply key ergonomic issues in design of operator displays Design and create a consistent and effective alarm philosophy for your installation Recognise and deal with human problems in interfacing to alarm systems

THE PROGRAM
Topic 19.1 SCADA FOR MONITORING INSTALLATIONS ACROSS A WIDE GEOGRAPHIC AREA Introduction Overview of wide area SCADA systems SCADA system hardware SCADA system software Communication protocols Topic 19.2 SCADA FOR PROCESS PLANT INSTALLATIONS AND COMMON ISSUES Introduction Overview of process plant SCADA systems SCADA system hardware SCADA system software SCADA alarm management Human Management Interface (HMI) SCADA network security SCADA historian Troubleshooting issues SCADA system maintenance SCADA system installation and commissioning Topic 19.3 LOOKING AT THE DCS - WHAT DOES IT PROVIDE US WITH? Summary of typical distributed control systems DCS vs SCADA vs PLCs DCS system elements Data communications The basic controller Basic DCS controller configuration Advanced controllers Programming of DCS systems Uninterrupted operation and security issues Topic 19.4 ALARMS, CONTROLS AND OPERATOR CONSIDERATIONS The operator interface Alarm management for DCSs Distributed control system reporting Distributed control system configuration Advanced control strategies Maintenance considerations Distributed control system applications Comparison of offerings from DCS vendors Among the practical sessions

instrumentation and control

Overview
SCADA has traditionally meant a window into the process of a plant or gathering of data from devices in the field, but now the focus is on integrating this process data into the actual business and using it in real time. The emphasis today, is on using Open Standards such as communication protocols (eg. IEC 60870, DNP3 and TCP/IP) and off-the-shelf hardware and software to keep the costs down. This comprehensive module covers the essentials of SCADA systems. The first section covers SCADA system from the point of view of the systems covering a wide geographical area such as water and electrical utilities. This gives an introduction to the SCADA hardware and software. The second section covers the SCADA system from the point of view of the equipment required within a process plant. This gives an introduction to the SCADA hardware and software then focuses on the main plant communication systems using Industrial Ethernet and Fieldbus. Finally, there is an examination of many of the common issues involved in all SCADA systems. These include Alarm Management, Human Management Interface (HMI), Network Security, SCADA Historians, Troubleshooting, Maintenance and Specification issues. This module will cover the practical applications of the modern distributed control system (DCS). Whilst all control systems are distributed to a certain extent today and there is a definite merging of the concepts of DCS, Programmable Logic Controller (PLC) and SCADA.

30

Module 20: Industrial Data Communications You will learn how to:
Apply best practice in industrial data communications design, installation and commissioning Test industrial data communications based protocols running over copper and fiber based cabling Design and install your own fully operational industrial data communications systems Integrate different industrial communications protocols and standards into a complete working system

(incl. Field bus and Industrial Ethernet)

THE PROGRAM
Topic 20.1 INTRODUCTION AND FUNDUMENTALS Overview of the module OSI model Systems engineering approach Attributes of typical communications systems - media, physical connections, protocols, applications General issues - noise, earthing, shielding, protection against dust and moisture (IP ratings) Copper/fiber - cable standards, cable distribution standards, connector standards, EMC conformance standards, splicing, connector attachment, drivers and detectors, grounding/earthing, termination, protection against transients Physical layer standards - EIA-232, EIA-485, 4-20 mA, IEC 61158-2 (Intrinsic safety) Industrial networks - industrial Ethernet, ASi, DeviceNet, Profibus, Foundation Fieldbus, Modbus Plus, Data Highway Plus, HART, Ethernet/IP, ControlNet, ProfiNet, Foundation Fieldbus HSE Industrial protocols - TCP/IP, Modbus, Modbus TCP, DNP3, 60870 SCADA Other technologies - VSAT, Wireless LAN, Wireless point to point Topic 20.2 SELECTION AND INSTALLATION METHODOLOGY Which standards/technologies to use: Field management (device) level, process management (operator) level, business management (enterprise) level, long distance SCADA/telemetry links Copper cabling and connectors - system design, installation, tips, tricks and pitfalls Fiber cabling and connectors - system design, installation, tips, tricks and pitfalls Wireless - system design, installation, tips, tricks and pitfalls Topic 20.3 COMMISSIONING/TESTING/TROUBLESHOOTING Copper infrastructure Fiber infrastructure Wireless infrastructure Networks - physical layer issues (OSI Layer 1) - data link layer issues (OSI Layer 2) - network layer issues (OSI Layer 3) - transport layer issues (OSI Layer 4) application and user layer issues (OSI Layers 7-8) - client/server issues

instrumentation and control

Overview
The objective of this module is to outline the best practice in designing, installing, commissioning andtroubleshootingindustrialdatacommunications systems. In any given plant, factory or installation there are a myriad of different industrial communications standards used and the key to successful implementation is the degree to which the entire system integrates and works together. With the vast number of different technologies and standards currently on the market, the debate is not what is the best, but rather how does industry assess and select the most appropriate for given applications. (Foundation Fieldbus, Profibus, Devicenet, Industrial Ethernet, Fiber Optic, Copper, Wireless) then ensuring that best practice is followed in designing, installing and commissioning the data communication links to ensure they run fault-free. The industrial data communications systems in your plant underpin your entire operation. It is critical that you apply best practice in designing, installing, troubleshooting and fixing any problems that may occur. This module distils all the tips and tricks learnt with the benefit of many years of experience. You will learn the best, proven practices to follow. The main steps in using todays communications technologies today involve selecting the correct technology and standards for your plant based on your requirements; doing the design of the overall system; installing the cabling and then commissioning the system. Fiber Optic cabling is generally accepted as the best approach for the physical communications but there are obviously areas where you will be forced to use copper wiring and/or, wireless communications. This module outlines the critical rules followed in installing the data communications physical transport media and then ensuring that the installation will be troublefree for years to come. You are not required to know the minute details of the actual protocols used, but rather how to select, install and maintain it in the most cost effective and beneficial manner.

Practical Exercises:
There are several practical sessions and exercises you will undertake to give you a solid basis to the material you cover in the module. These will be mainly conducted in the remote lab working from your remote PC: Do a fiber loss calculation (using spreadsheet) Doing a simple Path Loss calculation (using spreadsheet) Testing RS-232 link and RS-485 links remotely Setting up networks: Ethernet/DeviceNet Using a protocol analyser Troubleshooting and debugging Modbus and TCP/IP protocols. Designing a complete system Plus many others (taken from our other specialised communications classes) time permitting.

31

Module 21: Safety Instrumentation and Emergency Shutdown Systems

for Oil and Gas (IEC 61511 and IEC 61508) Basic Introduction
THE PROGRAM
Topic 21.1 PRACTICAL INTRODUCTION TO THE SAFETY LIFE CYCLE, IEC61511, RISK REDUCTION AND MEETING SAFETY TARGETS Overview of safety instrumented systems for managers Introduction to IEC 61511 and the safety lifecycle HAZOP methods and hazard analysis for defining risk reduction requirements Principles of risk reduction and safety allocation SIL determination methods based on IEC 61511 SIS configurations for both safety and availability targets Selection of sensors and actuators for safety duties Topic 21.2 PRACTICAL INTEGRATION, DOCUMENTATION, DIAGNOSTICS AND TESTING OF SAFTEY SYSTEMS Reliability analysis methods and programs to IEC 61511 Selection of safety controllers System integration and application software for safety controllers Documentation and validation of SIS systems Diagnostics and proof testing of safety instrumentation

You will learn how to:

Create a checklist that you can use to quickly access if your plant complies with the latest international safety standards Describe the key features of the IEC 61511 and IEC 61508 which you can apply immediately to your plant Comply with the IEC 61511 and IEC 61508 standards thus signifying that your company is following the best available safety practices for a process company Determine required SIL ratings using at least 3 different methods as listed in IEC 61511. This has the potential to save costs by avoiding needlessly high specifications for your trip systems Configure safety systems to minimise or avoid spurious trips and create the potential to reduce production losses Know what can be done and what should not be done with PLCs and smart sensors Understand the term combined safety system and how the fire and gas logic is incorporated Know how to take advantage of smart positioners and other self testing devices to reduce down time needed for proof testing Have overall knowledge of the key design and procedural requirements of IEC 61511 to ensure your safety systems comply with the best international codes of practice.

instrumentation and control

Overview
For project managers and engineers involved with hazardous processes, this module focuses on the management, planning and execution of automatic safety systems in accordance with IEC 61511, the newly released international standard for process industry safety controls. (See over for background to IEC 61511). IEC 61511 has been recognised by European safety authorities and by USA based process companies as representing the best practices available for the provision of automatic safety systems. The new standard captures many of the well established project and design techniques that have been described since 1996 in ANSI/ISA standard S84 whilst introducing many newer principles based on the master standard IEC 615108. The newly released standard IEC 61511 (published in 3 parts) combines the principles of IEC 61508 and S84 into a practical and easily understood code of practice specifically for end users in the process industries. This module is structured into two major parts to ensure that both managers and engineering staff are trained in the fundamentals of safety system practices. The first part of the module, approx the first third, provides an overview of the critical issues involved in managing and implementing safety systems.

32

Module 22: Wellhead and Flowline Control Systems You will learn how to:
Describe key features of wellhead and flowline control Design wellhead control and instrumentation systems Performing simple calculations for wellhead and flowline systems

THE PROGRAM
Topic 22.1 WELL CONTROL Basic considerations Causes of kicks Kick detection Pressure concepts and calculations Procedures Gas Characteristics and behaviours Fluids Constant bottomhole pressure well control methods Topic 22.2 WELL INFORMATION COLLECTION, USE, AND MANAGEMENT Equipment - Blow Out Preventor (BOP) Configuration, manifolds and piping, auxiliary well control equipment, BOP closing unit function and performance, testing/ completion pressure control equipment, pressure and function tests Well control equipment arrangements Well control related instrumentation Control systems. Wellhead control panels Standards

instrumentation and control

Overview
This module covers the essentials of instrumentation and control relating to wellhead and flowline control systems.

Module 23: Oil and Gas Specific Applications Floating Production,

Storage and Offloading (FPSO) Facilities

You will learn how to:
Apply smart maintenance techniques to your oil and gas installation Work with instrumentation and safety systems on cranes Perform simple settings on compressor surge control systems

THE PROGRAM
Topic 23.1 SMART MAINTENANCE TECHNIQUES AND KEY PLATFORM SYSTEMS Smart maintenance techniques Cranes instrumentation and safety systems Platform navigational audible warnings/ signals Compressor surge control basic considerations Topic 23.2 PROCESS SAFETY AND EMERGENCY RESPONSE SYSTEMS Flare flame front generator and ignition monitoring system Communication and alarm systems public address systems. Audible and visual alarms. Status lights. basic considerations

instrumentation and control

Overview
This module covers some miscellaneous systems, which are not covered in the core engineering parts of the module and are detailed below in the program.

33