0% found this document useful (0 votes)
81 views5 pages

HW 13

This document provides information and solutions for homework problems from a thermodynamics course. It includes: 1) A refrigeration cycle problem solved on a T-s diagram with calculations of heat transfer rates and compressor power/COP. Replacing the throttle valve with an isentropic turbine increases COP by 29.3%. 2) A vapor compression refrigeration cycle problem with given parameters solved for quality after throttling, COP and compressor power. 3) An ideal Otto cycle problem solved on temperature-entropy diagrams with heat addition and calculations of pressure/temperature after heat addition, net work, thermal efficiency and mean effective pressure.

Uploaded by

Yahya Tawakal
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
81 views5 pages

HW 13

This document provides information and solutions for homework problems from a thermodynamics course. It includes: 1) A refrigeration cycle problem solved on a T-s diagram with calculations of heat transfer rates and compressor power/COP. Replacing the throttle valve with an isentropic turbine increases COP by 29.3%. 2) A vapor compression refrigeration cycle problem with given parameters solved for quality after throttling, COP and compressor power. 3) An ideal Otto cycle problem solved on temperature-entropy diagrams with heat addition and calculations of pressure/temperature after heat addition, net work, thermal efficiency and mean effective pressure.

Uploaded by

Yahya Tawakal
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 5

College of Engineering and Computer Science Mechanical Engineering Department

Mechanical Engineering 370 Thermodynamics


Fall 2010 Course Number: 14319 Instructor: Larry Caretto

Unit Twelve Homework Solutions, December 7, 2010


1 A refrigerator uses R-134a as the working fluid and operates on an ideal aporcompression refrigeration c!cle "etween #$1% and #$& M'a$ (he mass flow rate of the refrigerant is #$#) kg*s$ Show the c!cle on a (-s diagram with respect to the saturation lines$ Determine +a, the rate of heat remo al from the refrigerated space and the power input to the compressor- +", the rate of heat re.ection to the en ironment- and +c, the coefficient of performance$
3 Condenser 2

T rottl!n" #alv e Ev aporator 4

Compressor

T e state po!nts $or t e cycle are s o%n on t e d!a"ram& For t e !deal cycle t ere !s no pressure drop or %or' !n a eat trans$er dev!ce so (1 ) (4 ) 0&12 *(a and (2 ) (3 ) 0&+ *(a& T e compressor !s assumed to be !sentrop!c so s2 ) s1& ,tate 1 !s a saturated vapor and state 3 !s a saturated l!-u!d& .e apply t e $!rst la% $or open systems assum!n" steady $lo% and ne"l!"!ble c an"es !n '!net!c and potent!al ener"!es/ eac dev!ce as one !nlet and one outlet& T us our $!rst la% =W +m ( hout hin ) $or eac dev!ce !s Q

.e can $!nd t e ent alpy values $rom tables 0111 to 0113&


1

"

2(evap ) 120 '(a3 ) 234&9+ '56'"

s1 ) s"2(evap ) 120 '(a3 ) 0&94++9 '56'"7

) 2(2 ) (cond ) +00 '(a8 s2 ) s1) 0&94++9 '56'"73 ) 2+3&94 '56'"7 by !nterpolat!on& ) $2(cond ) +00 '(a3 ) ::&:2 '56'"
4

For t e t rottl!n" valve8

so8

) $2(cond ) +00 '(a3 ) ::&:2 '56'"

,!nce t ere !s no use$ul %or' !n t e evaporator8 %e can $!nd t e eat removed $rom t e re$r!"erated space 2t e evaporator3 us!n" t e $!rst la% as $ollo%s&

0.05 kg 236.97 kJ 88.82 kJ ( h1 h4 ) = Q evap = m s kg kg


Q 7.41 kW evap =

kW s 1 kJ

,!nce t ere !s no eat trans$er to t e compressor8 %e can $!nd t e compressor po%er !nput us!n" t e $!rst la% as $ollo%s&

5acaranda 2En"!neer!n"3 3919 E1ma!l: lcaretto;csun&edu

*a!l Code :34:

( one: :1:&4++&444: Fa<: :1:&4++&+042

0.05 kg 236.97 kJ 273.54 kJ ( h1 h2 ) = W comp = m s kg kg


W 1.83 kW comp =

kW s 1 kJ

T e eat re=ected to t e env!ronment !s t e evaporator eat trans$er& .e can $!nd t !s !" temperature eat trans$er $rom t e "eneral cycle relat!ons !p: Q H = Q L + W & For t e re$r!"erat!on cycle8 t !s becomes&
Q H = Qcond = Q L + W = Qcond + Wcomp = 7.41 kW +1.83 kW
Q H = 9.24 kW

F!nally8 %e $!nd t e coe$$!c!ent o$ per$ormance t e values computed above $or %or' and eat&
cop = Q evap W comp = 7.41 kW 1.83 kW

cop / 4$#)

0f the throttling al e in 'ro"$ 1 is replaced "! an isentropic tur"ine- determine the percentage increase in the C1' and in the rate of heat remo al from the refrigerated space$ >e$er to t e d!a"ram $or problem 1& I$ t e t rottl!n" valve !s replaced by an !sentrop!c turb!ne8 only t e value o$ 4 %!ll c an"e& T e values o$ 18 28 and 38 %!ll rema!n t e same as t ey %ere !n problem 1& For an !sentrop!c process $rom po!nt 3 to po!nt 48 s 4 ) s3 ) s$2(cond ) 0&+ *(a3 ) 0&33230 '56'"7& 0t t e evaporator pressure o$ 120 '*(a8 t !s entropy value !s !n t e m!<ed re"!on& ?ere %e compute t e ent alpy8 4 $rom t e -ual!ty !n t e usual $as !on&

x4 =

s 4 s f ( P4 = 120kPa) s fg ( P4 = 120kPa)

0.33230 kJ 0.09725 kJ kg K kg K = = 0.2749 0.85503 kJ kg K

22.49 kJ 214.48 kJ 81.45 kJ + (0.2749) = kg kg kg .!t t !s value o$ 48 2and t e value o$ 1 $rom problem 101113 t e evaporator eat trans$er becomes h4 = h f ( P4 =120kPa ) + x 4 h fg ( P4 =120kPa ) =

0.05 kg 236.97 kJ 81.45 kJ ( h4 h1 ) = Q evap = m s kg kg


T !s !s an !ncrease o$

kW s 1 kJ = 7.78 kW

7.78 7.41 ) 4$2&3 $or t e eat removed $orm t e re$r!"erated space 7.41

above t e value !n problem 1& T e !sentrop!c turb!ne %or' can be used to reduce t e %or' !nput to t e compressor& T e ava!lable %or' $rom t e turb!ne !s $ound as $ollo%s&
0.05 kg ( h3 h4 ) = W turb = m s 88.82 kJ 81.454 kJ kg kg kW s 1 kJ
W 0.368 kW turb =

T e net cycle %or' !s =ust t e d!$$erence bet%een t e compressor !nput and t e turb!ne output: 5acaranda 2En"!neer!n"3 3919 E1ma!l: lcaretto;csun&edu *a!l Code :34: ( one: :1:&4++&444: Fa<: :1:&4++&+042

W 1.828 kW 0.368 kW net = Wcomp Wturb =

W net

= 1.46 kW

For t !s cycle8 t e coe$$!c!ent o$ per$ormance !s t e rat!o o$ Q to W net 8 evap

cop =

Q evap 7.78 kW = 1.46 kW Wnet

cop / )$3%

T e percent !ncrease !n t e cop !s 29&32 @ 4&09364&09 ) 31$)3& 3 A 3## k4*min refrigeration s!stem operates on a apor-compression refrigeration c!cle with refrigerant 134a as the working fluid and an isentropic efficienc! of 5) percent for the compressor$ (he refrigerant enters the compressor as a saturated apor at 14# k'a and is compressed to 5## k'a$ Determine +a, the 6ualit! of the refrigerant at the end of the throttling process- +", the coefficient of performance and +c, the power input to the compressor$
3 Condenser 2

T rottl!n" #alv e Ev aporator 4

Compressor

T e state po!nts $or t e cycle are s o%n on t e d!a"ram& For t e !deal cycle t ere !s no pressure drop or %or' !n a eat trans$er dev!ce so (1 ) (4 ) 140 '(a and (2 ) (3 ) :00 '(a& T e !deal compressor !s assumed to be !sentrop!c so s28s ) s1& ,tate 1 !s a saturated vapor and state 3 !s a saturated l!-u!d& .e apply t e $!rst la% $or open systems assum!n" steady $lo% and ne"l!"!ble c an"es !n '!net!c and potent!al ener"!es/ eac dev!ce as one !nlet and one outlet& T us our $!rst la% =W +m ( hout hin ) $or eac dev!ce !s Q

.e can $!nd t e ent alpy values $rom tables 0111 to 0113&


1

"

2(evap ) 140 '(a3 ) 239&14 '56'"

s1 ) s"2(evap ) 140 '(a3 ) 0&94494 '56'"7

28s

) 2(2 ) (cond ) :00 '(a8 s28s ) s1) 0&9322 '56'"73 ) 2+9&39 '56'"7 by !nterpolat!on&
2

,!nce t e compressor !s a %or' !nput dev!ce8 %e can $!nd t e actual value o$ 2 by t e e-uat!on ) 1 @ 2 1 @ 28s36s ) 239&14 '56'" @ 2239&14 '56'" @ 2+9&39 '56'"7362:9A3 ) 2+:&40 '56'"&
3

) $2(cond ) :00 '(a3 ) 93&42 '56'"


4

For t e t rottl!n" valve8

so8

) $2(cond ) :00 '(a3 ) 99&4+ '56'"

.e can $!nd t e -ual!ty at t e t rottl!n" valve e<!t as $ollo%s&

95.47 kJ 27.08 kJ h4 h f ( P4 = 140 kPa) kg kg x4 = = 212 . 08 kJ h fg ( P4 = 140 kPa) kg

74 / 3%$%3&

.e $!nd t e CB( $rom t e usual e-uat!on !n terms o$ t e cycle ent alpy values&

5acaranda 2En"!neer!n"3 3919 E1ma!l: lcaretto;csun&edu

*a!l Code :34:

( one: :1:&4++&444: Fa<: :1:&4++&+042

COP =

q evap wcomp

239.16 kJ 95.47 kJ h h4 kg kg = 1 = 281 . 78 kJ 239 . 16 kJ h2 h1 kg kg

C1' / 3$3&&

T e re-u!red po%er !nput to t e compressor !s $ound $rom t e re$r!"erant eat load and t e cop&

W comp
4

300 kJ min kW s min 60 s 1 kJ = = cop 3.37 Q evap

W comp

= 1.48 kW

An ideal 1tto c!cle has a compression ratio of 5$ At the "eginning of the compression process- air is at 2) k'a and %&oC- and &)# k4*kg of heat is transferred to air during the constant- olume heat addition process$ (aking into account the ariation of specific heats with temperature- determine +a, the pressure and temperature at the end of the heataddition process- +", the net work output- +c, the thermal efficienc!- and +d, the mean effecti e pressure for the c!cle$ To andle t e var!able eat capac!ty8 use t e !deal "as tables $or a!r 2Table 011+8 start!n" on pa"e :493& 0t t e !n!t!al temperature o$ 2+oC ) 300&19 7 %e $!nd u1 C u2300 73 ) 214&0+ '56'" and vr2300 73 ) 421&2& T e !sot ermal compress!on process $rom po!nt one to po!nt t%o !s computed as $ollo%s us!n" t e vr values $rom Table 011+&

v2 vr ( 2 ) = v1 v r ( 1 )

vr ( 2 ) = vr ( 1 )

v2 1 = 621.2 = 77.65 v1 8

= 673.1 K and u2 =

491.2 kJ kg

T e values o$ T2 and u2 are $ound by !nterpolat!on& For t e constant volume eat add!t!on8 %e apply t e $!rst la% to "et u3 ) u2 D -? ) 491&2 '56'" D +90 '56'" ) 1241&2 '56'"& 0t t !s value o$ !nternal ener"y8 %e $!nd T3 ) 1939 and vr2T33 ) 4&9::& T e pressure at po!nt 3 can be $ound $rom t e !deal "as la%&

P3 =

! 3 ! 3 ! 3 v1 ! 3 P (C! ) = = = (C!) = 1 v3 v2 v1 v2 ! 1 1 P1

(95 kPa )(8)(1539 K ) = 3,898 kPa (300.15 K )

T e !sentrop!c e<pans!on $rom po!nt 3 to po!nt 4 !s computed !n t e same %ay as t e !sentrop!c compress!on $rom po!nt 1 to po!nt 2&

v4 vr ( 4 ) = v3 v r ( 3 )

vr ( 4 ) = vr ( 3 )

v4 = (6.588)(8) = 52.70 v3

= 774.5 K and u 4 =

571.69 kJ kg

T e lo% temperature eat re=ect!on !s $ound $rom t e $!rst la% $or closed1system8 constant1volume processes: E-LE ) Eu1 @ u4E ) E214&0+ '56'" @ 9+1&49 '56'"E ) 39+&42 '56'"& .e can t en $!nd t e ne% %or' as t e d!$$erence bet%een t e t%o cycle eat trans$ers: E%E ) E-?E 1 E-LE ) +90 '56'" @ 39+&42 '56'" or 8w8 / 32%$35 k4*kg& T e cycle e$$!c!ency !s $ound as $rom t e usual e-uat!on& ) E%E6E-?E ) 2392&3: '56'"3 6 2+90 '56'"3 or / )%$33& 5acaranda 2En"!neer!n"3 3919 E1ma!l: lcaretto;csun&edu *a!l Code :34: ( one: :1:&4++&444: Fa<: :1:&4++&+042

T e mean e$$ect!ve pressure !s de$!ned by t e e-uat!on mep ) E%E62v ma< @ vm!n3& For t e Btto cycle8 vma< ) v1 and vm!n ) v2 ) v16C>& T us8 %e can $!nd our mean e$$ect!ve pressure as $ollo%s&

mep =

w 1 v1 1 C!

w ! 1 P 1 1 1 C!

392.38 kJ kg 0.287 kJ mep / 42) k'a& (300.15 K ) 1 kg K 1 95 kPa 8

Air enters the compressor of a gas-tur"ine engine at 3## k and 1## k'a- where it is compressed to &## k'A and )5# 9$ :eat is transferred to air in the amount of 2)# k4*kg "efore it enters the tur"ine$ ;or a tur"ine efficienc! of 5<3 determine +a, the fraction of the tur"ine work ouput used to dri e the compressor and +", the thermal efficienc!$ Assume aria"le specific heats for air$ For eac component !n t e "as turb!ne cycle %e assume t at t e component !s steady $lo% %!t ne"l!"!ble '!net!c and potent!al ener"y c an"es& Eac component as one !nlet and one outlet so t at t e "eneral $!rst la% $or eac component !n t !s system !s - ) % u D out @ !n& .e assume t at t ere !s no %or' !nput !n t e eat add!t!on step and t at t e compressor and turb!ne are ad!abat!c& .e also assume t at t ere !s no pressure loss dur!n" t e eat add!t!on step so t at t e compressor e<!t pressure o$ +00 '(a !s t e same as t e turb!ne entrance pressure& .e %!ll use t e a!r tables 2Table 011+8 start!n" on pa"e :493&to compute t e a!r propert!es %!t var!able eat capac!ty& For t e compressor8 t e $!rst la%8 %!t - ) 08 becomes % ) 300&19 '56'" @ 9:4&04 '56'" ) 12:9&:9 '56'"&
!n

out

& ) 2300 73 @ 29:0 73 )

For t e !deal8 !sentrop!c turb!ne8 %e $!nd t e end state $rom t e !deal "as table relat!on $or !sentrop!c processes: (r2Tout8s3 ) (r2T!n32(out6(!n3 % ere (r2T!n3 ) 4+4&11 and (out6(!n ) 2100 '(a36 2+00 '(a3 so t at (r2Tout8s3 ) 4+4&116+ ) 4+&+3& Interpolat!on !n t e !deal "as tables "!ves out8s ) 909&:3 '56'"& T e actual turb!ne %or' t en !s $ound as % ) s2 !n @ out8s3& T e !nlet ent alpy to t e turb!ne !s $ound $rom t e $!rst la% $or t e eat add!t!on step: - ? ) turb8!n @ comp8out8 so t at turb8!n ) -? D comp8out8) 990 '56'" D 9:4&04 '56'" ) 1934&04 '56'"& .e can t en $!nd t e turb!ne %or'& .turb ) s2
!n

out8s

3 )2:4A32934&04 '56' 1 909&:3 '56'"3 ) 942&0 '56'"

T e compressor %or' !nput as a $ract!on o$ t e turb!ne %or' output !s no% $ound& E%compE6E%turbE ) E12:9&:9 '56'"E 6 2942&0 '56'"3 T e e$$!c!ency !s $ound $rom t e usual e-uat!on& ) E%netE6E-?E ) 2942&0 '56'" 1 2:9&:9 '56'"3 6 2990 '56'"3 or / %&$#3& 8wcomp8*8wtur"8 / )%$&3&

5acaranda 2En"!neer!n"3 3919 E1ma!l: lcaretto;csun&edu

*a!l Code :34:

( one: :1:&4++&444: Fa<: :1:&4++&+042

You might also like