Scribd
Upload
103 views20 pages

Spectral Reflectance

The document discusses the spectral reflectance of vegetation, soil, and water. It explains that vegetation strongly absorbs blue and red light but reflects green light, causing it to appear green. The reflectance of vegetation, soil, and water varies depending on factors like the moisture content, the presence of chlorophyll, and the content of suspended solids. Measurements of spectral reflectance can help discriminate between plant species and detect plant stress or changes in soil and water properties.

Uploaded by

riteshreply
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
103 views20 pages

Spectral Reflectance

The document discusses the spectral reflectance of vegetation, soil, and water. It explains that vegetation strongly absorbs blue and red light but reflects green light, causing it to appear green. The reflectance of vegetation, soil, and water varies depending on factors like the moisture content, the presence of chlorophyll, and the content of suspended solids. Measurements of spectral reflectance can help discriminate between plant species and detect plant stress or changes in soil and water properties.

Uploaded by

riteshreply
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 20

SPECTRAL REFLECTANCE OF VEGETATION, SOIL AND WATER

LWR314

Electromagnetic Spectrum
Energy transfer from one body to another in the form of electromagnetic waves A fundamental characteristic of radiation is the wavelength ( ) of propagation All bodies radiate at a large number of wavelengths (continuous range of wavelengths)

Spectral Reflectivity
Reflectivity is the fraction of incident radiation reflected by a surface The reflectance characteristics of Earths surface features may be quantified by measuring the portion of incident energy that is reflected This is measured as a function of wavelength () and is called spectral reflectance (r)

Typical spectral reflectance curves for vegetation, soil and water

Spectral reflectance of Vegetation


Chlorophyll strongly absorbs energy in the wavelength bands centred at about 0.45 m (blue) and 0.67 m (red) Our eyes perceive healthy vegetation as green in colour because of the very high reflection of green light If a plant is subject to some form of stress, it may decrease chlorophyll production resulting in less chlorophyll absorption in the blue and red bands Often the red reflectance increases to the point that we see the plant turn yellow (combination of green and red)

Colour Wheel

Spectral reflectance of Vegetation

Spectral reflectance of Vegetation


In the range from about 0.7 to 1.3 m a plant leaf typically reflects 40 - 50% of the energy incident upon it primarily due to the internal structure of plant leaves Because the internal structure of leaves are highly variable between plant species, reflectance measurements in this range often permit us to discriminate between species (even if they look the same in visible wavelengths) Many plant stresses alter the reflectance in this region, and sensors operating in this range are often used for vegetation stress detection

Spectral reflectance of Vegetation

Spectral reflectance of Vegetation

Spectral reflectance of Vegetation


Beyond 1.3 m energy incident upon vegetation is essentially absorbed or reflected with little to no transmittance of energy Dips in reflectance occur at 1.4, 1.9 and 2.7 m because water in the leaf absorbs strongly at these wavelengths (water absorption bands) Reflectance peaks occur at about 1.6 m and 2.2 m, between the absorption bands Throughout the range beyond 1.3 m, leaf reflectance is approximately inversely related to the total water present in a leaf which is a function of both the moisture content and the thickness of a leaf

Changes in the reflectance from a vegetative surface owing to water stress

Typical spectral reflectance curves for vegetation, soil and water

Spectral reflectance of Soil


The factors that influence soil reflectance act over less specified spectral bands Factors affecting soil reflectance are moisture content, soil texture (proportion of sand, silt and clay), surface roughness, presence of iron oxide and organic matter content The presence of moisture in soil will decrease its reflectance - this effect is greatest in the water absorption bands at about 1.4, 1.9, 2.2 and 2.7 m Soil moisture content is strongly related to the soil texture

Spectral reflectance of Soil

Variation in the spectral reflectance characteristics of soil according to moisture content

Spectral reflectance of Soil

Variation in the spectral reflectance characteristics of soil according to soil texture

Typical spectral reflectance curves for vegetation, soil and water

Spectral reflectance of Water


Water (in soil, vegetation or water bodies) absorbs radiation at near-IR wavelengths and beyond (strong absorption bands at about 1.4, 1.9 and 2.7 m) Reflectance from a water body can stem from an interaction with:
the waters surface (specular reflection), with material suspended in the water, or with the bottom of the water body

Spectral reflectance of Water


Clear water absorbs relatively little energy with wavelengths < 0.6 m, resulting in high transmittance in the blue-green portion of the spectrum As the turbidity of water changes, the reflectance changes dramatically Increases in chlorophyll concentration tend to decrease reflectance in blue wavelengths and increase it in green wavelengths (can monitor algae)

Spectral reflectance of Water

Variation in the spectral reflectance characteristics of turbid water according to the content of suspended solids

You might also like