Mercedes-Benz Atego

Download as pdf or txt
Download as pdf or txt
You are on page 1of 18
At a glance
Powered by AI
The document provides specifications for various Mercedes-Benz Atego truck models, including information on engines, transmissions, axles, payloads, and dimensions.

The Atego is available with either a 4-cylinder or 6-cylinder engine, with output ranging from 130 to 205 kW. The engines listed are the OM 904 LA and OM 906 LA.

Transmission options include the MB G60-6 manual and G85-6 manual, with single or twin rear axles. Transfer cases and differential locks are also options. Trailer brakes are not standard.

ATEGO Specications

Index
Atego cabs ...........................................................................................................2 Cab drawings ......................................................................................................3 Atego engines .....................................................................................................4 Transmissions.....................................................................................................5 Chassis frame .....................................................................................................6 Freight Carrier ................................................................................................ 8-9 Tipper .................................................................................................................11

Atego cabs

Short Cabs (Standard)


The spacious S-cab is designed to meet the needs of the driver/passenger in local distribution, short-distance and construction-site operation. It is designed on the basis of state-of-the-art ergonomics and safety criteria and offers numerous storage facilities. The short dimensions of the cab permit maximum utilisation of space for bodies. Features: Completely steel cab with rigid structure Interior sunvisors Rubber oor mat Full complement of instruments and warning lights Seat covers made of at-woven fabric Adjustable steering wheel column Pre-installation for 12V radio Cup holder for driver and co-driver Bottle holder in door trim Entrance grab handles for driver and passenger Storage facilities on the rear panel Stef lid (air vent), manually operated 4-point cab suspension with hydraulic tilting Safety standards to ECE 29 Enhanced aerodynamics Transparent-glass headlights Heated exterior mirror on the passengers side, electrically adjustable Doors open 95 for easy access Immobiliser Powerful heating and ventilation system with individual control Head restraints and automatic 3-point seat belts Windows in rear wall panel Benets: Easier working for the driver due to very spacious, functional workplace with friendly atmosphere. Enhanced utilisation of space for bodies due to short dimensions of the cab. Numerous storage facilities in the cab keep the cab tidy. High level of passive safety due to the high-strength design and efcient safety facilities. Practically-orientated cab suspension with good suspension comfort relieves the strain on the driver.

Long Cabs
The L-cab is designed entirely to meet the needs of the driver/passengers and to provide comfort in long-distance and distribution operations. It is designed on the basis of state-of-the-art ergonomics and safety criteria, and offers generous space and storage facilities. Features: As per short cab, with additional features listed below Cab curtain all-round Seat/bunk combination Optimised conversion between a berth and crew seats Increased passenger capacity to four additional seats with safety belts Folding co-driver seat for easy access into cab rear area Benets: Easier working for the driver due to very spacious, functional workplace with friendly atmosphere. Assists recuperation phases in the cab (e.g. during waiting times) due to generous space concept designed on the basis of state-of-theart ergonomics and safety criteria. High level of rest and seating comfort for driver and crew, due to wide seat/bunk combination. Numerous storage facilities in the cab keep the cab tidy and increase comfort. High level of passive safety due to the high-strength design and efcient safety facilities. Comfortable cab suspension with high suspension comfort relieves the strain on the driver on long journeys. Note: The L-cab offered as standard in model 1428AF/39 is a long cab shell prepared to retrot a crew cab. No oor assembly or engine tunnel in the rear cab area. Rear panel provisionally attached, with a few spot welds for transfer to body builder.

Cab drawings

Short cab

Long cab

Atego engines
The OM 904 LA engine with 130 kW/177 hp at 2 200 rpm is a R4 engine with enhanced efciency for individual adaptation of the engine output to the relevant transport task. The OM 906 LA engine with 170 kW/231 hp is a R6 engine for individual adaptation of the engine output to the relevant transport task.

OM 904 LA
Technical Data / Features: In-line 4-cylinder engine with an exhaust-gas turbocharger and charge-air intercooling Displacement: 4 250 cm3 3-valve technology Cooling: water-cooled Unit-Pump System (UPS) technology single-nozzle fuel-injection pumps Engine management by fully electronic Telligent engine management system. Injection pressure: up to 1 800 bar Compression ratio: 1:17,75 Peak combustion pressure: 170 bar 6-hole injection nozzles, centrally arranged Performance data Maximum output: 130 kW/177 hp at 2 200 rpm Maximum torque: 675 Nm at 1 200 rpm 1 600 rpm Euro 3 emission level Benets: Assists in achieving fuel-saving, economical operation as a function of transport task and driving style. Reduction in lifecycle costs thanks to long engine oil-change intervals and low fuel consumption.

OM 906 LA
Technical Data / Features: In-line 6-cylinder engine with an exhaust-gas turbocharger and charge-air inter-cooling. Displacement: 6 374 cm3 3-valve technology Cooling: water-cooled Engine management: Electronic engine management system integrated in the Telligent drive management system Fuel injection system: Unit-Pump System (UPS) technology with single-plunger fuel-injection pumps and centrally arranged 6-hole injection nozzles Injection pressure: up to 1 800 bar Performance data for models xx23 refer to model overview Maximum output: 170 kW/231 hp at 2 200 rpm Maximum torque: 810 Nm at 1 200 rpm to 1 600 rpm Performance data for models xx28 refer to model overview Maximum output: 205 kW(279hp) at 2 200 rpm Maximum torque: 1 100 Nm at 1200 rpm to 1 600 rpm Euro 3 emission level Benets: Assists in achieving fuel-saving, economical operation as a function of transport task and driving style.

4-Cylinder
140 220 200

6-Cylinder
240 220 200

6-Cylinder

130

120

130 kW

180 160

205 kW
180

110 140 100 120 100 80 70 60 60 40 20 0

170 kW
160 140

(kW)

(kW)

90

(kW)

120 100 80 60 40 20

80

50

40

800 700

1000 900

1400 1200

(Nm)

(Nm)

810 Nm
700 600 500

500 400 300

800 600 400

240

240

240

(g/kWh)

(g/kWh)

(g/kWh)

220 200 180 600 800 1000 1200 1400 1600 1800 2000 2200 2400 2600

220 200 180 600 800 1000 1200 1400 1600 1800 2000 2200 2400 2600

220 200 180 600 800 1000 1200 1400 1600 1800 2000 2200 2400 2600

OM 904 LA Euro3

OM 906 LA Euro3

OM 906 LA Euro3

(Nm)

660 Nm

600

800

1 100 Nm

1000

Transmissions

G85-6
The G 85-6 gearbox is an all-synchromesh gearbox with 6 forward gears and one reverse gear. It features a hydraulic gearshift.

G56-6 G856 (Ratios)


The G 56-6 gearbox is an all-synchromesh manual gearbox with 6 forward gears and one reverse gear. It is available with engine-mounted linkage gearshift or Telligent automated gearshift. 1st gear = 6,70 2nd gear = 3,81 3rd gear = 2,29 4th gear = 1,48 5th gear = 1,00 6th gear = 0,73 Reverse gear = 6,29 Weight, not including oil: approx. 145 kg Benets Allows economical operation, in conjunction with other components of the powertrain, as a function of the transport task.

G566 (Ratios)
1st gear = 6,291 2nd gear = 3,475 3rd gear = 2,095 4th gear = 1,383 5th gear = 1,00 6th gear = 0,786 Reverse gear = 6,29 Weight, not including oil: approx. 100 kg Benets Allows economical operation, in conjunction with other components of the powertrain, as a function of the transport task. Lightweight gearbox for vehicles with or without Telligent automated gearshift.

ALLISON 3000P
The Allison Series 3000P electronically controlled automatic gearbox changes gear automatically. It features ve forward gears and one reverse gear. The highest gear can be preselected by means of the pushbuttons of the pushbutton panel on the centre console there is no clutch pedal.

G60-6
The G 60-6 gearbox is an all-synchromesh manual gearbox with 6 forward gears and one reverse gear. It is available with engine-mounted linkage gearshift.

Allison 3000P (Ratios)


1st gear: 3,59 2nd gear: 1,86 3rd gear: 1,41 4th gear: 1,00 5th gear: 0,75 Reverse gear: 5,34 Weight: approx. 290 kg The optional retarder (Allison 3000PR) is an additional, powerful and wear-free auxiliary brake. The 4 retarder stages are connected downstream of the engine brake and constantly-open throttle. Benets Substantially relieves the driver's workload by simplifying moving off, driving and manoeuvring owing to automatic gear changing. Protection of the powertrain due to gentle, smooth gearshifting. Reduction of fuel consumption due to elimination of converter slip. Higher drive-away torque due to torque increase by the torque converter.

G606 (Ratios)
1st gear = 9,2 2nd gear = 5,23 3rd gear = 3,15 4th gear = 2,03 5th gear = 1,37 6th gear = 1,00 Reverse gear = 8,65 Weight, not including oil: approx. 144 kg Benets Allows economical operation, in conjunction with other components of the powertrain, as a function of the transport task.

Chassis frame
Convincing frame handling.
The high-strength frame of the Atego features the following highlights: No parts project above the top of the frame Wheelbases between 3 260 mm and 5 360 mm at standard spacing of 300 mm depending on model The frame side rails feature a continuous hole spacing of 50 mm. Bodies and additional equipment can therefore be attached and repositioned quickly, easily and, above all, at low cost. The environment-friendly paint nish is sprayed manually. This ensures full-coverage of all surfaces and, as a consequence, corrosion protection. The frame components are made of E 380TM and E 500TM high-strength steel. They are cold-formed for enhanced strength. Two-piece modular frame with two symmetrical Z-prole members on front end and straight, untapered, U-shaped logitudinal and 65 mm ange width at the rear. Cross members and side rails are interconnected by means of riveted gusset plates. This design is particularly exible and able to withstand extreme stresses and strains.

Mercedes-Benz Atego: Freight Carrier


Model specications:
918/42 General Info Engine No. of cylinders Total displacement Output Torque Emission level Air cleaner Type Clutch Type Transmission Type Ratios MB 6-speed, full synchromesh, with engine mounted gearshift 1st gear: 6,291:1 6th gear: 0,786:1 Reverse: 6,290:1 Telligent automatic gearshift PTO Front axle Load capacity Rear axle Load capacity Axle ratio Differential lock Steering Type Suspension Front Rear Shock Absorbers Stabilisers Brakes Service Parking Auxiliary 1 Chassis Two-piece modular frame with two symmetrical Z-prole members on front end and straight, untapered, U-shaped longitudinal and 65mm ange width at the rear Yes Two-piece modular frame with two symmetrical Z-prole members on front end and straight, untapered, U-shaped longitudinal and 65mm ange width at the rear Yes Two-piece modular frame with two symmetrical Z-prole members on front end and straight, untapered, U-shaped longitudinal and 65mm ange width at the rear Yes Dual-circuit air brake with ABS/ALB with disc brakes front and rear Spring-loaded brake cylinders acting on rear wheels Engine brake with decompression valve Dual-circuit air brake with ABS/ALB with disc brakes front and rear Spring-loaded brake cylinders acting on rear wheels Engine brake with decompression valve Dual-circuit air brake with ABS/ALB with disc brakes front and rear Spring-loaded brake cylinders acting on rear wheels Air-actuated engine brake with decompression valve Twin-leaf parabolic springs Multi-leaf parabolic springs with support leaf springs Twin-tube shock absorbers front and rear Front and rear Twin-leaf parabolic springs Multi-leaf parabolic springs with support leaf springs Twin-tube shock absorbers front and rear Front and rear Twin-leaf parabolic springs Multi-leaf parabolic springs with support leaf springs Twin-tube shock absorbers front and rear Front and rear Power assisted, recirculating ball with variable steering gear ratio Power assisted, recirculating ball with variable steering gear ratio Power assisted, recirculating ball with variable steering gear ratio 7,0 ton 3,909:1 No 11,0 ton 3,308:1 No 11,0 ton 3,909:1 No 4,1 ton 5,3 ton 5,3 ton Optional MB 6-speed, full synchromesh, with engine mounted gearshift 1st gear: 9,201:1 6th gear: 1,000:1 Reverse: 8,650:1 Optional MB 6-speed, full synchromesh, with engine mounted gearshift 1st gear: 9,201:1 6th gear: 1,000:1 Reverse: 8,650:1 Optional Optional Single-plate dry clutch with diaphragm spring, hydraulically released with over-centre spring on pedal Single-plate dry clutch with diaphragm spring, hydraulically released with over-centre spring on pedal Single-plate dry clutch with diaphragm spring, hydraulically released with over-centre spring on pedal High capacity paper element High capacity paper element High capacity paper element 4 In-line 4, 250 litres 130kW (177hp) @ 2 200 r/min 675 N.m @ 1 200 to 1 600 r/min EURO 3 4 In-line 4, 250 litres 130kW (177hp) @ 2 200 r/min 675 N.m @ 1 200 to 1 600 r/min EURO 3 4 In-line 4, 250 litres 130kW (177hp) @ 2 200 r/min 675 N.m @ 1 200 to 1 600 r/min EURO 3 1118/48 1318/48

Type

Spare wheel carrier Fuel Tank Capacity Electrical systems/Electronics System voltage Batteries - No. x capacity PSM Body CAN Interface Wheels Tyres, front Tyres, rear

Apprx. 180 l

Apprx. 180 l

Apprx. 180 l

24V 2 x 12V/115 Ah No

24V 2 x 12V/115 Ah No

24V 2 x 12V/115 Ah Yes

235/75 R17.5 235/75 R17.5

265/70 R19.5 265/70 R19.5

11.00 R22.5 11.00 R22.5

1323/48 General Info Engine No. of cylinders Total displacement Output Torque Emission level Air cleaner Type Clutch Type Transmission Type Ratios MB 6-speed, full synchromesh, with engine mounted gearshift 1st gear: 6,700:1 6th gear: 0,730:1 Reverse: 6,290:1 Telligent automatic gearshift PTO Front axle Load capacity Rear axle Load capacity Axle ratio Differential lock Steering Type Suspension Front Rear Shock Absorbers Stabilisers Brakes Service Parking Auxiliary 1 Chassis Two-piece modular frame with two symmetrical Z-prole members on front end and straight, untapered, U-shaped longitudinal and 65mm ange width at the rear Yes Dual-circuit air brake with ABS/ALB with disc brakes front and rear Spring-loaded brake cylinders acting on rear wheels Air-actuated engine brake with decompression valve Asymmetrical 3-leaf parabolic springs Multi-leaf parabolic springs with support leaf springs Twin-tube shock absorbers front and rear Front and rear Power assisted, recirculating ball with variable steering gear ratio 11,0 ton 4,778:1 No 5,3 ton Optional Optional Single-plate dry clutch with diaphragm spring, hydraulically released with over-centre spring on pedal High capacity paper element 6 In-line 6, 370 litres 170kW (231hp) @ 2 200 r/min 810 N.m @ 1 200 to 1 600 r/min EURO 3

1518/54

1523/54

4 In-line 4, 250 litres 130kW (177hp) @ 2 200 r/min 675 N.m @ 1 200 to 1 600 r/min EURO 3

6 In-line 6, 370 litres 170kW (231hp) @ 2 200 r/min 810 N.m @ 1 200 to 1 600 r/min EURO 3

High capacity paper element

High capacity paper element

Single-plate dry clutch with diaphragm spring, hydraulically released with over-centre spring on pedal

Single-plate dry clutch with diaphragm spring, hydraulically released with over-centre spring on pedal

MB 6-speed, full synchromesh, with engine mounted gearshift 1st gear: 9,201:1 6th gear: 1,000:1 Reverse: 8,650:1 Optional Optional

MB 6-speed, full synchromesh, with engine mounted gearshift 1st gear: 6,700:1 6th gear: 0,730:1 Reverse: 6,290:1 Optional Optional

6,1 ton

6,1 ton

11,0 ton 4,300:1 Yes

11,0 ton 4,778:1 Yes

Power assisted, recirculating ball with variable steering gear ratio

Power assisted, recirculating ball with variable steering gear ratio

Twin-leaf parabolic springs Multi-leaf parabolic springs with support leaf springs Twin-tube shock absorbers front and rear Front and rear

Asymmetrical 3-leaf parabolic springs Multi-leaf parabolic springs with support leaf springs Twin-tube shock absorbers front and rear Front and rear

Dual-circuit air brake with ABS/ALB with disc brakes front and rear Spring-loaded brake cylinders acting on rear wheels Air-actuated engine brake with decompression valve

Dual-circuit air brake with ABS/ALB with disc brakes front and rear Spring-loaded brake cylinders acting on rear wheels Air-actuated engine brake with decompression valve

Type

Two-piece modular frame with two symmetrical Z-prole members on front end and straight, untapered, U-shaped longitudinal and 65mm ange width at the rear Yes

Two-piece modular frame with two symmetrical Z-prole members on front end and straight, untapered, U-shaped longitudinal and 65mm ange width at the rear Yes

Spare wheel carrier Fuel Tank Capacity Electrical systems/Electronics System voltage Batteries - No. x capacity PSM Body CAN Interface Wheels Tyres, front Tyres, rear

Apprx. 180 l

Apprx. 180 l

Apprx. 180 l

24V 2 x 12V/115 Ah Yes

24V 2 x 12V/115 Ah Yes

24V 2 x 12V/115 Ah Yes

11.00 R22.5 11.00 R22.5

11.00 R22.5 11.00 R22.5

11.00 R22.5 11.00 R22.5

Mercedes-Benz Atego: All-wheel Drive & Tipper


Model specications:
1118AF/39 General Info Engine No. of cylinders Total displacement Output Torque Emission level Air cleaner Type Clutch Type Transmission Type Ratios MB 6-speed, Full synchromesh, with engine mounted gearshift 1st gear: 9,201:1 6th gear: 1,000:1 Reverse: 8,650:1 Optional PTO Type Max. continuous torque Max. available power Transfer Case Type Front axle Load capacity Rear axle Load capacity Axle ratio Differential lock Steering Type Suspension Front Rear Shock Absorbers Stabilisers Brakes Service Parking Auxiliary 1 Chassis Two-piece modular frame with two symmetrical Z-prole members on front end and straight, untapered, U-shaped longitudinal and 65mm ange width at the rear Two-piece modular frame with two symmetrical Z-prole members on front end and straight, untapered, U-shaped longitudinal and 65mm ange width at the rear Two-piece modular frame with two symmetrical Z-prole members on front end and straight, untapered, U-shaped longitudinal and 65mm ange width at the rear Dual-circuit air brake with ABS/ALB with drum brakes front and rear Spring-loaded brake cylinders acting on rear wheels Engine brake with decompression valve Dual-circuit air brake with ABS/ALB with drum brakes front and rear Spring-loaded brake cylinders acting on rear wheels Air-actuated engine brake with decompression valve Dual-circuit air brake with ABS/ALB with disc/drum front and rear respectively Spring-loaded brake cylinders acting on rear wheels Engine brake with decompression valve Twin-leaf parabolic springs Multi-leaf parabolic springs with support leaf springs Twin-tube shock absorbers front and rear Front and rear Twin-leaf parabolic springs Multi-leaf parabolic springs with support leaf springs Twin-tube shock absorbers front and rear Front and rear Twin-leaf parabolic springs Multi-leaf parabolic springs with support leaf springs Twin-tube shock absorbers front and rear Front and rear Power assisted, recirculating ball with variable steering gear ratio Power assisted, recirculating ball with variable steering gear ratio Power assisted, recirculating ball with variable steering gear ratio 7,7 ton 4,300:1 Yes 10,8 ton 5,222:1 Yes 10,8 ton 5,222:1 Yes 4,7 ton 6,1 ton 6,1 ton 3 shaft transfer case with differential lock 3 shaft transfer case with differential lock Mercedes-Benz NA 61-10b / 1,54:1 ange drive 248 N.m 40 kW / 92 kW @ 1000 / 2300 r/min Chelsea 859-b / 1,7:1 ange drive 270 N.m 28kW / 78kW @ 1000 / 2300 r/min Mercedes-Benz NA 60-2c / 400 N.m 33kW / 76kW @ 1000 / 2300 r/min 5-speed Allison 3000P, multi stage planetary transmission, with hydrodynamic torque converter 1st gear: 3,490:1 5th gear: 0,750:1 Reverse: 5,030:1 Allison 3000PR with retarder MB 6-speed, Full synchromesh, with engine mounted gearshift 1st gear: 9,201:1 6th gear: 1,000:1 Reverse: 8,650:1 Telligent automatic gearshift Single-plate dry clutch with diaphragm spring, hydraulically released with over-centre spring on pedal Single-plate dry clutch with diaphragm spring, hydraulically released with over-centre spring on pedal High capacity paper element High capacity paper element High capacity paper element 4 In-line 4, 250 litres 130kW (177hp) @ 2 200 r/min 675 N.m @ 1 200 to 1 600 r/min EURO 3 6 In-line 6, 370 litres 205kW (279hp) @ 2 200 r/min 1 100 N.m @ 1 200 to 1 600 r/min EURO 3 4 In-line 4, 250 litres 130kW (177hp) @ 2 200 r/min 675 N.m @ 1 200 to 1 600 r/min EURO 3 1428AF/39 1518K/33

Type

Fuel Tank Capacity Electrical systems/Electronics System voltage Batteries - No. x capacity Wheels Tyres, front Tyres, rear 12.00 R20 12.00 R20 11.00 R22.5 11.00 R22.5 11.00 R22.5 11.00 R22.5 24V 2 x 12V/115 Ah 24V 2 x 12V/165 Ah 24V 2 x 12V/115 Ah Apprx. 75 l (slimline) Apprx. 130 l (slimline) Apprx. 180 l

11

Model Overview
1118AF/39 918/42 1118/48 1318/48 1323/48 1518/54 1428AF/39 1518K/33 OM 904 LA OM904LA 4 in-line 130/177 2 200 675 1 200 - 1 600 G56-6 3,909:1 3,308:1 3,909:1 4,778:1 G60-6 G60-6 1 200 -1 600 1 200 - 1 600 675 675 2 200 2 200 130/177 130/177 170/231 2 200 810 1 200 - 1 600 G85-6 4,300:1 4 in-line 4 in-line 6 in-line OM904LA OM904LA OM906LA 4 in-line 130/177 2 200 675 1 200 - 1 600 MB G60-6 5,222 5,222:1 OM904LA 4 in-line 130/177 2 800 675 1 200 - 1 600 G60-6 OM 904 LA 4 in-line 130/177 2 200 675 1 200 - 1 600 MB G60-6 VG 550-3W 4,300:1 VG 900 - 3W AL 3000 P 1 200 - 600 1 100 2 200 205/279 6 in-line OM 906 LA

1523/54

Cab OM906LA 6 in-line 170/231 2 200 810 1 200 - 1 600 G85-6 4,778:1

Standard Short Cab

Long Cab

Engine

Number of Cylinders

Output kW/hp

@ r/min

Torque Nm

@ r/min

Transmission

Transfer Case

PTO-transmission drive

Rear Axle Final Ratio

Brakes LS6 LS4 LS4 LS6 LS4 LS6 LS6 LS6 LS6

Discs All Round

Drums All Round

Discs in Front, Drums at Rear

Differential Lock

Twinline Trailer Brake

Steering

Reinforced Rear Cross Member

Suspension 5,6 7,1 10,5 10,5 5,6 6,1 4,0 6,2 4,4 8,1 75 3 860 11 000 11 000 = Optional equipment 130 3 860 14 500 14 500 180 3 260 15 000 21 000 180 4 220 9 500 13 000 180 4 760 11 990 21 000 180 4 760 13 500 21 000 5,1 9,3 180 4 760 13 500 28 000 5,1 9,3 180 5 360 15 000 21 000 6,1 10,5 180 5 360 15 000 28 000 6,1 10,5

Front Parabolic Spring (load capacity in tons)

Rear Parabolic Spring (load capacity in tons)

Trailer 15-pin Plug

PSM Body CAN Interface

Fuel Tank

Capacity Approximately ( l )

Wheelbase mm (centre of front axle to centre of rear axle)

Manufacturers Gross Vehicle Mass (GVM) (kg)

Manufacturers Gross Combination Mass (GCM) (kg)

= Standard equipment

Vehicle Masses (kg)


1118AF/39 3 214 1 517 4 731 5 000 6 200 11 000 11 000 5 000 6 200 11 000 11 000 14 500 21 000 13 000 21 000 21 000 14 500 15 000 9 500 11 990 13 500 9 000 9 000 6 200 8 100 9 000 5 600 6 100 3 800 4 400 5 100 5 100 9 000 13 500 28 000 14 500 21 000 13 000 21 000 21 000 28 000 14 500 15 000 9 500 11 990 13 500 13 500 10 400 10 500 6 200 8 100 9 300 9 300 5 600 6 100 3 800 4 400 5 100 5 100 5 587 4 494 3 652 4 299 4 491 4 667 4 796 6 100 10 500 15 000 21 000 6 100 9 000 15 000 21 000 1 849 1 499 1 121 1 492 1 716 1 703 1 818 3 738 2 955 2 530 2 807 2 775 2 963 2 977 1428AF/39 1518K/33 918/42 1118/48 1318/48 1323/48 1518/54

1523/54 3 165 1 807 4 972 6 100 10 500 15 000 28 000 6 100 9 000 15 000 28 000

* Front axle tare

* Rear axle tare (Single Wheel Application - SWA)

* Total tare (with cab, tools and spare wheel)

Manufacturers front axle mass (GA, front)

Manufacturers rear axle mass (GA, rear)

Manufacturers gross vehicle mass (GVM)

Manufacturers gross combination mass (GCM)

Permissible front axle mass (A, front)

Permissible rear axle mass (A, rear)

Permissible maximum vehicle mass (V)

Permissible drawing vehicle mass (D/T)

* Figures stated are estimates and includes full fuel tank, tools and spare wheel.

Vehicle Dimensions (mm)


1118AF/39 918/42 7 665 2 323 2 557 4 220 5 835 3 950 1 380 1 885 1 955 1 838 902 827 1 105 1 060 2 243 854 17,4 m 973 846 1 643 852 13,2 m 1 949 1 762 832 766 914 796 1 643 851 16,0 m 7 495 2 416 2 875 3 860 5 735 3 650 1 440 2 085 2 010 2 060 1 105 1 060 1 199 1 067 1 643 852 17,4 m 1 010 1 061 1 796 2 034 2 085 1 440 1 440 1 135 3 050 3 050 5 135 4 185 3 860 3 260 2 831 2 672 2 441 2 363 7 385 6 015 1428AF/39 1518K/33

1118/48 8 665 2 363 2 663 4 760 6 835 4 550 1 440 2 285 1 975 1 838 933 853 991 864 1 643 854 17,4 m

1318/48 8 665 2 363 2 667 4 760 6 835 4 550 1 440 2 285 1 975 1 838 937 850 987 860 1 643 854 17,4 m

1323/48 8 665 2 363 2 667 4 760 6 835 4 550 1 440 2 285 1 975 1 838 937 850 987 860 1 643 854 17,4

1518/54 9 665 2 363 2 687 5 360 7 835 5 150 1 440 2 685 1 955 1 838 955 868 1 014 886 1 643 854 19,4 m

1523/54 9 665 2 363 2 687 5 360 7 835 5 150 1 440 2 685 1 955 1 838 955 868 1 014 886 1 643 854 19,4 m

Overall length

Overall width

Vehicle height (unladen)

W/B

Wheelbase (front axle to centre of rear axle)

Chassis length from rear of cab

CA

Back of cab (air intake) to centre of rear axle

Front overhang

Rear overhang

Track width, front

Track width, rear

M1

Frame height, front

M1

Frame height, front (laden)

M2

Frame height, rear

M2

Frame height, rear (laden)

BBC

Bumper to back of cab (back of air intake)

Outside width of chassis at rear

Turning circle

Note: Chassis heights are subject to variation due to suspension settings, tyre makes and tread patterns.

Dealer

Please note: Changes may have been made to the product since the brochure went to press (25.09.2008). The manufacturer reserves the right to make changes to the design, form, colour and specication of any Mercedes-Benz vehicle during the life cycle period, provided these changes, while taking into account the interests of the vendor, are communicated to the purchaser. The illustrations may show accessories and items of optional equipment which are not part of standard South African specication. Colours may differ slightly from those shown in the brochure, owing to the limitations of the electronic and printing process. www.mercedes-benz.co.za Part number: 0001 4995 02

You might also like