Scribd
Upload
690 views1 page

Map Cad-Duct Object Enabler Installation Instructions

The document provides instructions for installing the CADmep+ and CADduct Object Enabler, which supports several Autodesk products. It describes closing any open Autodesk applications, running the installer, and that the installer will automatically register with installed Autodesk products. It also notes that whenever a drawing with MAP objects is opened in a supported application, the DBX program will load and the objects will be visible. It includes instructions for manually loading the Object Enabler if it was not automatically loaded.

Uploaded by

barryoake
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
690 views1 page

Map Cad-Duct Object Enabler Installation Instructions

The document provides instructions for installing the CADmep+ and CADduct Object Enabler, which supports several Autodesk products. It describes closing any open Autodesk applications, running the installer, and that the installer will automatically register with installed Autodesk products. It also notes that whenever a drawing with MAP objects is opened in a supported application, the DBX program will load and the objects will be visible. It includes instructions for manually loading the Object Enabler if it was not automatically loaded.

Uploaded by

barryoake
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Object Enabler Installation Instructions

The CADmep+ and CADduct Object Enabler supports the following Autodesk products: AutoCAD 20072012 32/64bit NavisWorks ADT DWG TrueView 3D Viz 3D Studio Max

Installing the Object Enabler Close any Open Autodesk RealDWG applications i.e. AutoCAD, NavisWorks etc. Double Left click the file OESetup.exe to start the installation. Follow the installation dialog instruction.

Once the installation has completed, the installer will have automatically located and registered with all of the installed Autodesk products. Whenever you open a drawing that includes any MAP objects, AutoCAD, NavisWorks, ADT etc. will automatically load the DBX program and the MAP objects will now be visible.

Manually Loading the Object Enabler Note: If the ARX has been previously loaded (the CADmep+\Mech application executable) you will need to manually load the Object Enabler (DBX) Start AutoCAD Type APPLOAD, browse to the AutoCAD installation folder

Load the following module: MAPcadduct17.dbx (for AutoCAD 20072009) MAPcadduct17x64.dbx (for AutoCAD 20082009 64Bit) MAPcadduct18.dbx (for AutoCAD 20102012) MAPcadduct18x64.dbx (for AutoCAD 20102012 64Bit)

Micro Application Packages Ltd, 2 Metropolitan Business Park, Preston New Road, Blackpool, Lancashire, United Kingdom FY3 9LT Tel. 01253 792 112 Fax. 01253 792 169 www.mapsoftware.com email: [email protected]

1 of 1

You might also like