0% found this document useful (0 votes)
23 views1 page

Thickness (In) Corner (Psi) Interior (Psi) Edge (Psi)

The document shows measurements of corner psi, interior psi, and edge psi for wood thicknesses ranging from 6 to 8.5 inches. The corner psi, interior psi, and edge psi values all decrease as thickness increases. At a thickness of 7.5 inches, the corner psi, interior psi, and edge psi values are all below 450 psi, which is identified as a reasonable threshold. Therefore, the document concludes that 7.5 inches should be taken as the design thickness.

Uploaded by

Aryanth Reddy
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
23 views1 page

Thickness (In) Corner (Psi) Interior (Psi) Edge (Psi)

The document shows measurements of corner psi, interior psi, and edge psi for wood thicknesses ranging from 6 to 8.5 inches. The corner psi, interior psi, and edge psi values all decrease as thickness increases. At a thickness of 7.5 inches, the corner psi, interior psi, and edge psi values are all below 450 psi, which is identified as a reasonable threshold. Therefore, the document concludes that 7.5 inches should be taken as the design thickness.

Uploaded by

Aryanth Reddy
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 1

Thickness(in)

6
6.25
6.5
6.75
7
7.25
7.5
7.75
8
8.5

Corner(Psi)
602.1507
559.85732
521.83124
487.52302
456.46778
428.2703
402.593
379.14627
357.68063
319.85771

interior(Psi)
327.173346
305.395259
285.794811
268.086119
252.029193
237.421315
224.090252
211.888884
200.690902
180.883824

edge(Psi)
610.391886
571.698364
536.722908
504.994003
476.113506
449.743249
425.594429
403.419133
383.003528
346.734367

At 7.5 inch thickness we got reasonable values below than 450 psi..so 7.5 inch we can
taken as our design thickness

You might also like