System Redundancy FW V40 en
System Redundancy FW V40 en
System Redundancy FW V40 en
Possible Configurations
Ring struktur with standard-CPU (MRP) System redundancy with S7-400H
DP/ MPI
DP
DP/ MPI
DP
S7-400H
PN
DP/ MPI
DP
Sync
PN
PN
Sync
PN
PN
Sync
PN
ET 200M
ET 200M
IM153-4 PN IO Standard
Page 2
1. Wire break of the ring 2. Power off / failure of a single station 3. Switch over time appr. 200ms
1. 2. 3. 4.
Wire break of the ring Power off / failure of a single station CPU failure Switch over time appr. 30ms autom. synchronisation at CPU change
Siemens AG 2011. All Rights Reserved. Industry Sector
Page 3
High-available automation system SIMATIC S7-400H with PROFINET I/O System Redundancy (SR)
Goals Overview Innovations Redundant Periphery Periphery Overview PROFINET I/O PROFIBUS I/O High-available communication Safety & High availibility Applications References
Automatic switchover in the event of a fault Event-controlled synchronization of both stations makes for fast and bumpless switchover Redundant CPU picks up processing at the interruption point without loss of information and alarms. All components can be replaced during running operation (hot swapping). When replacing a CPU, it is automatically loaded with the latest programs and data.
Open ring architecture SR-Support through H-CPUs and ET 200M Guarantee of functionality in the case of an error in a CPU or a ring node or a bus error
CPU 41x-5H
Switch
CPU 41x-5H
PROFINET
Switch
Switch
ET 200M
ET 200M
ET 200M
E 200M
Page 4
SIMATIC ET 200M