Scribd
Upload
107 views3 pages

Moc 3022

The document summarizes the MOC302_ series of optically coupled isolators consisting of a gallium arsenide infrared emitting diode coupled with a light activated silicon bilateral switch performing the functions of a triac. Key specifications of the device include a high isolation voltage of 5.3kV RMS, 7.5kV peak, 400V peak blocking voltage, and operating temperature range of -40°C to 100°C. The document provides typical electrical characteristics and graphs of performance metrics over temperature.

Uploaded by

aboalfotoh
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
107 views3 pages

Moc 3022

The document summarizes the MOC302_ series of optically coupled isolators consisting of a gallium arsenide infrared emitting diode coupled with a light activated silicon bilateral switch performing the functions of a triac. Key specifications of the device include a high isolation voltage of 5.3kV RMS, 7.5kV peak, 400V peak blocking voltage, and operating temperature range of -40°C to 100°C. The document provides typical electrical characteristics and graphs of performance metrics over temperature.

Uploaded by

aboalfotoh
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

MOC3020X, MOC3021X, MOC3022X, MOC3023X MOC3020, MOC3021, MOC3022, MOC3023

OPTICALLY COUPLED BILATERAL SWITCH NON-ZERO CROSSING TRIAC

APPROVALS l UL recognised, File No. E91231 under


Package System 'KK'

2.54 7.0 6.0 1.2 7.62 6.62 1 2 3

Dimensions in mm 6 5 4 7.62 4.0 3.0 0.5 13 Max 0.26

'X' SPECIFICATION APPROVALS l VDE 0884 in 3 available lead forms : - STD - G form - SMD approved to CECC 00802 DESCRIPTION

3.0

The MOC302_ series are optically coupled isolators consisting of a Gallium Arsenide infrared emitting diode coupled with a light activated silicon bilateral switch performing the functions of a triac mounted in a standard 6 pin dual-in-line package. FEATURE l Options :10mm lead spread - add G after part no. Surface mount - add SM after part no. Tape&reel - add SMT&R after part no. l High Isolation Voltage (5.3kVRMS ,7.5kVPK ) l 400V Peak Blocking Voltage l All electrical parameters 100% tested l Custom electrical selections available APPLICATIONS CRTs l Power Triac Driver l Motors l Consumer appliances l Printers
l

0.5

3.35

ABSOLUTE MAXIMUM RATINGS (25 C unless otherwise noted) Storage Temperature -550C - +1500C Operating Temperature -400C - +1000C Lead Soldering Temperature 2600C (1.6mm from case for 10 seconds) INPUT DIODE Forward Current 50mA Reverse Voltage 6V Power Dissipation 70mW (derate linearly 0.93mW/0C above 250C) OUTPUT PHOTO TRIAC Off-State Output Terminal Voltage 400V Forward Current (Peak) 1A Power Dissipation 300mW (derate linearly 4.0mW/0C above 250C) POWER DISSIPATION

OPTION SM
SURFACE MOUNT

OPTION G

7.62

0.6 0.1 10.46 9.86

1.25 0.75

0.26 10.16

Total Power Dissipation 330mW (derate linearly 4.4mW/0C above 250C)

ISOCOM COMPONENTS LTD Unit 25B, Park View Road West, Park View Industrial Estate, Brenda Road Hartlepool, Cleveland, TS25 1YD Tel: (01429) 863609 Fax :(01429) 863581
19/12/02

DB91045m-AAS/A4

ELECTRICAL CHARACTERISTICS ( TA = 25C Unless otherwise noted ) PARAMETER Input Forward Voltage (VF) Reverse Current (IR) Peak Off-state Current ( I DRM ) Peak Blocking Voltage ( VDRM ) On-state Voltage ( VTM ) Critical rate of rise of off-state Voltage ( dv/dt ) ( note 1 ) Critical rate of rise of commutating Voltage ( dv/dt ) ( note 1 ) 400 1.5 10 0.1 0.2 3.0 MIN TYP MAX UNITS 1.2 1.5 100 100 V A nA V V V/s V/s I load = 15mA, VIN = 30V ( fig 1. ) TEST CONDITION IF = 10mA VR = 6V VDRM = 400V (note 1 ) IDRM = 100nA ITM = 100mA ( peak )

Output

Coupled

Input Current to Trigger ( IFT )(note 2 ) MOC3020 MOC3021 MOC3022 MOC3023

30 15 10 5

mA mA mA mA
A

VD = 3V ( note 2 )

Holding Current , either direction ( IH ) Input to Output Isolation Voltage VISO 5300 7500

100

VRMS VPK

See note 3 See note 3

Note 1. Test voltage must be applied within dv/dt rating. Note 2. Guaranteed to trigger at an IF value less than or equal to max. IFT , recommended IF lies between Rated IFT and absolute max. IFT . Note 3. Measured with input leads shorted together and output leads shorted together.

FIGURE 1 +5v VCC VCC + 0v COMMUTATING dv/dt STATIC dv/dt RIN 120 1 2 3 6 VIN 5 4 RL 2k

19/12/02

DB91045m-AAS/A4

RMS On-state Current vs. Ambient Temperature Normalised repetitive peak off-state voltage 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 -30

Normalised Repetitive Peak Off-state Voltage vs. Ambient Temperature

RMS on-state current IT (Arms)

0.1

0.05

Normalised to TA = 25C

0 -30 0 25 50 75 100 125 Ambient temperature TA ( C ) Forward Current vs. Ambient Temperature 80 70 Forward current IF (mA) 60 50 40 30 20 10 0 -30 0 25 50 75 100 125 Ambient temperature TA ( C ) Normalised Input Trigger Current vs. Ambient Temperature Normalised input trigger current ( IFT ) 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 -30 0 25 50 75 100 Ambient temperature TA ( C )
19/12/02

25

50

75

100

Ambient temperature TA ( C ) On-state Voltage vs. Ambient Temperature 2.8 2.4 On-state voltage VTM (V) 2.0 1.6 1.2 0.8 0.4 0 -30 0 25 50 75 100 Ambient temperature TA ( C ) On-state Current vs. On-state Voltage 100 On-state current ITM (mA) 80

60 IF = 20mA TA = 25C

Normalised to TA = 25C

40

20 0 0 0.4 0.8 1.2 1.6 2.0 On-state voltage VTM (V)


DB91045m-AAS/A4

You might also like