Principle of disinfection
Disinfection lectures
Principle of disinfection Individual disinfection processes Water and wastewater disinfection (w/disinfection kinetics) Air disinfection and disinfection on surfaces Disinfection on infectious solids (biosolids)
Definitions
Sterilization: A process intended to remove or destroy all viable forms of microbial life, including bacterial spores.
Definitions
Disinfection: The destruction of pathogenic and other kinds of microorganisms by physical and chemical means. Disinfection is less lethal process than sterilization because it destroys most recognized pathogenic microorganisms, but not necessarily all microbial forms such as bacterial spores.
Definitions
Preservation: The process by which chemical or physical agents prevent biological deterioration of substances.
Definitions
Sterilizer: An agent that destroys or eliminates all forms of microbial life in the inanimate environment, including all forms of vegetative bacteria, bacterial spores, fungi, fungal spores, and viruses.
Definitions
Disinfectant: An agent that frees from infection, usually a chemical agents but sometimes a physical one, such as x-rays or ultraviolet light, that destroy disease or other harmful microorganisms but may not kill bacterial spores. It refers to substances applied to inanimate objects.
Definitions
Sanitizer: An agent that reduces contaminants in the inanimate environment to level considered safe as determined by Public Health Ordinance, or that reduces the bacterial population by significant numbers where public health requirements have not been established.
Definitions
Antiseptics: An agent that opposes sepsis, putrefaction, or decay by preventing or arresting the growth of microorganisms.
Antiseptic products are applied on or in the living body of humans or other animals.
Antibiotics: an organic chemical substance produced by microorganisms that has capacity in dilute solutions to destroy or inhibit the growth of bacteria or other microorganisms.
It is usually used as a chemitherapeutant and must be low in toxicity while effective against microorganisms.
The target sites of antibiotics
Common sterilizers and disinfectants
Sterilizer
Most heat (>121 oC) Dry heat (> 160 oC) Ionizing radiation
Disinfectant
Physical
Ultraviolet radiation Hydrostatic pressure
Chemical
Alcohols Phenols Quaternary ammonium compounds Glutaraldehyde Iodine and iodine compounds Chlorine species (free chlorine, chloramines, and chlorine dioxide) Ozone
Mechanisms of sterilizers and disinfectants
Sterilizer
Moist and dry heat: protein denaturation, enzyme inhibition, RNA and DNA breakdown Ionizing radiations: single or double-strand breakage in DNA
Disinfectants
Ultraviolet radiation: thymine dimers, various photoproducts (5,6-dihydroxy-dihydrothymine, TDHT, pyrimine-(6-4)-pyrimidone,) Chemical disinfectants: protein denaturation, enzyme inhibition, breakdown of nucleic acids
Mode of action of (chemical) disinfectants
Adsorption on the microbes surface Diffusion through the surface Binding to the vulnerable sites (e.g. plasma membrane, cytoplasmic proteins, nucleic acids, and so on) Disruption of the vulnerable sites Injury and death of the microbes
Structure of viruses
Structure of bacteria
Structure of bacterial cell walls
Structure of fungi
Structure of fungal cell wall
Structure of algae
Components of algal cell walls
Cellulose Silica or calcium carbonate or polysaccharide
Structure of bacterial spores
Surface structure of bacterial endospores
Exosporium: a thin protein cover Spore coat: layers of spore-specific proteins Cortex: loosely cross-linked peptidoglycan Core: core cell wall, cytoplasmic membrane, cytoplasm, nucleoid, ribosomes, and others Remarkable physical barrier against sterilization and disinfection
Survive up to 150 oC with dry heat Extremely resistant to ultraviolet, strong acid and bases, and chemical disinfectants
Structure of Giardia cysts
Surface structure of Giardia cysts
An inner membrane A thick (0.3 m) outer filamentous portion Filaments
7-20 nm in diameter Protein and a unique carbohydrate ((1-3)-N-acetylD-galactopyranosamine) Strong interchain interaction and tightly packed meshwork
Remarkable physical barrier against most chemical disinfectants
Surface structure of Cryptosporidium oocyst
Surface structure of Cryptosporidium oocyst
Glycocalyx
82 % carbohydrate, 17 % protein, and trace fatty acid
Outer oocyst wall
Multilaminate glycoprotin, lipid, and lipid conjugates
Central lipid layer Inner oocyst layer
Cross-linked glycoprotein Outer and inner zone
Remarkable physical barrier against most chemical disinfectants
Structure of Helminth eggs (Ascaris)
Surface structure of Helminth eggs (Ascaris)
Surface structure of Ascaris eggs
Outer surface: protein and filamentous fibers Outer limited membrane Chitinous zone Inner limited membrane Considerable physical barrier against most chemical disinfectants
Factors in antimicrobial processes
Target microorganisms The media to be treated The intended use of the media Presence of interfering materials in the media
Antimicrobial products
Regulated by EPA 5000 antimicrobial products (1997) with 256 antimicrobially active ingredient
19 % sanitizers 80 % disinfectants 1% sterilizers
Selection criteria (chemical antimicrobial agents)
Antimicrobial efficacy Corrosivity Chemical hazard Environmental concerns Stability
Biocidal spectrum
Corrosivity
Chemical hazard
Environmental concerns
Stability
To be continued
