Electrical &electronics Measurement: 1 Internal Examination 4 Semester
Electrical &electronics Measurement: 1 Internal Examination 4 Semester
Answer all the questions in this section A and any two out of the three questions in section B. SECTION A Marks: 5 * 2
Explain briefly the term Sensitivity. Differentiate between the term Reproducibility and Repeatibility. What is Gross Error ?How can be these avoided. A Moving Coil Voltmeter has a uniform scale with 100 divisions, the full scale reading is 200V and 1/10 of the scale division can be estimated with a fair degree of certainity.Determine the Resolution of the instrument in volt. 5. What is the basic difference between Wheatsone Bridge and Kelvin Double Bridge. 1. 2. 3. 4.
SECTION B Marks: 2 *10
6.
(a) What
Bridge. (b) In the Wheatsone Bridge ,the values of Resistances of various arms are P=1000,Q=100,R=2005,S=200.The battery has an Emf of 5V and negligible internal resitance.The Galvanometer has a Current Sensitivity of 10mm/A and an Internal Resitance of 100.Calculate the Deflection of Galvanometer and the Sensitivity of the bridge in terms of Deflection per unit change in resistance. [10] 7. Derive the balanced condition for Maxwell Inductance-Capacitance bridge? Write down its Advantages and Dis-advantages.[10]
8. A set of independent Current measurement was taken by six observers and recorded as 12.8mA,12.2mA,12.5mA,13.1mA,12.9mAand 12.4mA.Calculate a)The arithmetic mean. b)The Deviations from the Mean. c)The Average Deviation. d)The Standard Deviation. e) Variance [10]