0% found this document useful (0 votes)
271 views13 pages

Torque Problems

The document contains several problems involving the calculation of torque: 1) A force of 55 N is applied to a door at different lever arms and the torque is calculated for each case. 2) The torque of a 720 N force about the ankle joint 3.6 m from the point of application is determined. 3) A mobile is balanced over a baby's crib by calculating the torque of toy objects hanging from different points on the mobile and finding the position of a support string that balances the system.

Uploaded by

Vladimir Morote
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
271 views13 pages

Torque Problems

The document contains several problems involving the calculation of torque: 1) A force of 55 N is applied to a door at different lever arms and the torque is calculated for each case. 2) The torque of a 720 N force about the ankle joint 3.6 m from the point of application is determined. 3) A mobile is balanced over a baby's crib by calculating the torque of toy objects hanging from different points on the mobile and finding the position of a support string that balances the system.

Uploaded by

Vladimir Morote
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 13

Torque Problems

In the following figure, a force whose magnitude is 55 N is applied to a door. However, the lever arms are different in the three parts of the drawing: a) l =.8 m, b) l =.6 m, and c) l =0m. Determine the torque in each case.

The figure shows the ankle joint and the Achilles tendon attached to the heel at point P. The tendon exerts a force of magnitude F=720 N. Determine the torque of this force about the ankle joint, which is located 3.6 x 102 m away from point P.

Tracy is building a mobile to hang over her baby's crib. She hangs a 0.02 kg toy sailboat 0.01 m from the left end and a 0.015 kg toy truck 0.2 m from the right end of a bar 0.5 m long. If the lever arm itself has negligible mass, where must the support string be placed so that the arm balances?

Your first step is to determine how much force there is in the support string. This is arrived at by getting the summation of all the vertical forces and since the system has to be in equilibrium Force in the support string (call this Fs) = 0.015(9.8) + 0.02(9.8)= 0.035(9.8)
Fs

The next step is to locate where Fs will be along the mobile and this is done by getting the summation of all torques and again, since this system is in equilibrium, the summation of torques = 0.

The next step is to locate where Fs will be along the mobile and this is done by getting the summation of all torques and again, since this system is in equilibrium, the summation of torques = 0. Let X = distance from the right end of the bar where the support string will be placed, in other words, the far right can be the axis of rotation Watch signs

-(9.8(0.015)(0.2)) + 9.8(0.035(X)) - (9.8(0.02)(0.49)) = 0

X = .366 m from the right side

Figure 1 shows an object with several forces acting on it. The pivot point is at O.
F1 = 10 N, and is at a distance of 0.25 m from O, where = 80o F2 = 7.0 N, acting perpendicular to the object, at a distance of 1.25 m from O F3 = 12 N, is 0.60 m from O, and acts at = 40o from the horizontal

Find the total (net) torque on the object.

= -10(sin80)(.25) + 12(sin40)(.6) 7(1.25) = -6.58 Nm (where is down)

You spin a bicycle wheel (diameter of 0.85 m, mass of 4.5 kg), applying a force of 24 N tangentially. Find the angular acceleration of the wheel, assuming the spokes are negligible.

= I Fl = I 24 x .425 = MR2 24 x .425 = 4.5 x .4252 x = 12.55 rad/s2

More help

You might also like