0% found this document useful (0 votes)
332 views10 pages

Mikrotik Qos Calculator V5: Local

The document provides instructions and configuration commands for setting up Quality of Service (QoS) bandwidth priorities on a Mikrotik router. It includes a QoS calculator that allows the user to assign bandwidth percentages to up to 4 priorities for two network interfaces. The output includes the queue configuration commands to apply these priority settings on the Mikrotik router.
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
332 views10 pages

Mikrotik Qos Calculator V5: Local

The document provides instructions and configuration commands for setting up Quality of Service (QoS) bandwidth priorities on a Mikrotik router. It includes a QoS calculator that allows the user to assign bandwidth percentages to up to 4 priorities for two network interfaces. The output includes the queue configuration commands to apply these priority settings on the Mikrotik router.
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 10

Mikrotik QoS Calculator v5

: B (Interface Name & Bandwidth Test) "Commands for Local Queue Rules" & Mikrotik. Instructions: Fill the fields in blue letters (Interface Name & Bandwidth Test). Then copy the table "Commands for L Queue Rules" & paste at Mikrotik console.

Interface Trasmit / Upload Packet Mark 1 2 3 4 Percent % 10% 20% 30% 40%

Local ether1 100.0 Mbps Local 10.0 Mbps 20.0 Mbps 30.0 Mbps 40.0 Mbps

Remote ether2 100.0 Mbps Remote 10.0 Mbps 20.0 Mbps 30.0 Mbps 40.0 Mbps

Commands for Local Queue Rules


1 2 3 4 5 6 7 8 9 / queue type set wireless-default kind=pfifo pfifo-limit=200 / queue tree

add name="ether1 Queue" parent="ether1" packet-mark="" limit-at=80000000 queue=wireless-default priority=8 max-limit=900 burst-limit=0 burst-threshold=0 burst-time=0

add name="ether1 Priority 2-3-4" parent="ether1 Queue" packet-mark="" limit-at=60000000 queue=wireless-default priority limit=70000000 burst-limit=0 burst-threshold=0 burst-time=0

add name="ether1 Priority 3-4" parent="ether1 Priority 2-3-4" packet-mark="" limit-at=20000000 queue=wireless-defau priority=8 max-limit=40000000 burst-limit=0 burst-threshold=0 burst-time=0

add name="ether1 Priority 1" parent="ether1 Queue" packet-mark=1 limit-at=70000000 queue=wireless-default priority=1 m limit=80000000 burst-limit=0 burst-threshold=0 burst-time=0 add name="ether1 Priority 2" parent="ether1 Priority 2-3-4" packet-mark=2 limit-at=60000000 queue=wireless-default max-limit=70000000 burst-limit=0 burst-threshold=0 burst-time=0

add name="ether1 Priority 3" parent="ether1 Priority 3-4" packet-mark=3 limit-at=30000000 queue=wireless-defau priority=3 max-limit=40000000 burst-limit=0 burst-threshold=0 burst-time=0

add name="ether1 Priority 4" parent="ether1 Priority 3-4" packet-mark=4 limit-at=20000000 queue=wireless-defau priority=4 max-limit=40000000 burst-limit=0 burst-threshold=0 burst-time=0

Commands for Remote Queue Rules


1 2 3 4 5 6 7 / queue type set wireless-default kind=pfifo pfifo-limit=200 / queue tree

add name="ether2 Queue" parent="ether2" packet-mark="" limit-at=80000000 queue=wireless-default priority=8 max-limit=900 burst-limit=0 burst-threshold=0 burst-time=0

add name="ether2 Priority 2-3-4" parent="ether2 Queue" packet-mark="" limit-at=60000000 queue=wireless-default priority limit=70000000 burst-limit=0 burst-threshold=0 burst-time=0

add name="ether2 Priority 3-4" parent="ether2 Priority 2-3-4" packet-mark="" limit-at=20000000 queue=wireless-defau priority=8 max-limit=40000000 burst-limit=0 burst-threshold=0 burst-time=0

add name="ether2 Priority 1" parent="ether2 Queue" packet-mark=1 limit-at=70000000 queue=wireless-default priority=1 m limit=80000000 burst-limit=0 burst-threshold=0 burst-time=0 add name="ether2 Priority 2" parent="ether2 Priority 2-3-4" packet-mark=2 limit-at=60000000 queue=wireless-default max-limit=70000000 burst-limit=0 burst-threshold=0 burst-time=0

8 9

add name="ether2 Priority 3" parent="ether2 Priority 3-4" packet-mark=3 limit-at=30000000 queue=wireless-defau priority=3 max-limit=40000000 burst-limit=0 burst-threshold=0 burst-time=0

add name="ether2 Priority 4" parent="ether2 Priority 3-4" packet-mark=4 limit-at=20000000 queue=wireless-defau priority=4 max-limit=40000000 burst-limit=0 burst-threshold=0 burst-time=0

alculator v5

Menu
Transformations Mikrotik Graphs

Name & Bandwidth Test) Mikrotik. andwidth Test). Then copy the table "Commands for Local

Burst Time Burst Threshold Mikrotik 2.9.x+ ? 0 = No , 1 = Yes Wireless ? 0 = No , 1 = Yes

0s 0 Yes

Yes

al Queue Rules

0000000 queue=wireless-default priority=8 max-limit=90000000

mark="" limit-at=60000000 queue=wireless-default priority=8 max-

packet-mark="" limit-at=20000000 queue=wireless-default =0 burst-time=0

=1 limit-at=70000000 queue=wireless-default priority=1 max-

acket-mark=2 limit-at=60000000 queue=wireless-default priority=2 me=0

packet-mark=3 limit-at=30000000 queue=wireless-default hold=0 burst-time=0

packet-mark=4 limit-at=20000000 queue=wireless-default hold=0 burst-time=0

te Queue Rules

0000000 queue=wireless-default priority=8 max-limit=90000000

mark="" limit-at=60000000 queue=wireless-default priority=8 max-

packet-mark="" limit-at=20000000 queue=wireless-default =0 burst-time=0

=1 limit-at=70000000 queue=wireless-default priority=1 max-

acket-mark=2 limit-at=60000000 queue=wireless-default priority=2 me=0

packet-mark=3 limit-at=30000000 queue=wireless-default hold=0 burst-time=0

packet-mark=4 limit-at=20000000 queue=wireless-default hold=0 burst-time=0

Local ether1 Queue Priority 2-3-4 Priority 3-4 Priority 2 Priority 3 Priority 4 20.0 Mbps 30.0 Mbps 20.0 Mbps 40.0 Mbps 60.0 Mbps 40.0 Mbps 0.0 Mbps 0.0 Mbps 0.0 Mbps Limit 80.0 Mbps 60.0 Mbps 20.0 Mbps Factor 1 2 0 Limit 80000000 60000000 20000000

Real Values
Limit Max Limit Burst Limit Priority 1 10.0 Mbps 20.0 Mbps 0.0 Mbps

Mikrotik Values
Limit Max Limit Burst Limit Remote

Priority 1 70000000 80000000 0

ether1 Queue Priority 2-3-4 Priority 3-4 Priority 2 Priority 3 Priority 4 60000000 30000000 20000000 70000000 40000000 40000000 0 0 0

Real Values
Limit Max Limit Burst Limit Priority 1 10.0 Mbps 20.0 Mbps 0.0 Mbps

ether2 Queue Priority 2-3-4 Priority 3-4 Priority 2 Priority 3 Priority 4 20.0 Mbps 30.0 Mbps 20.0 Mbps 40.0 Mbps 60.0 Mbps 40.0 Mbps 0.0 Mbps 0.0 Mbps 0.0 Mbps

Limit 80.0 Mbps 60.0 Mbps 20.0 Mbps Factor 1 2 0 Limit 80000000 60000000 20000000

Mikrotik Values
Limit Max Limit Burst Limit

Priority 1 70000000 80000000 0

ether2 Queue Priority 2-3-4 Priority 3-4 Priority 2 Priority 3 Priority 4 60000000 30000000 20000000 70000000 40000000 40000000 0 0 0

Max Limit 90.0 Mbps 70.0 Mbps 40.0 Mbps

Or Max Or Burst, Not Both

Max Limit 90000000 70000000 40000000

Max Limit 90.0 Mbps 70.0 Mbps 40.0 Mbps

Or Max Or Burst, Not Both

Max Limit 90000000 70000000 40000000

Local
Name ether1 Queue Priority 1 Priority 2-3-4 Priority 2 Priority 3-4 Priority 3 Priority 4 ether1 Queue ether1 Queue Priority 2-3-4 Priority 2-3-4 Priority 3-4 Priority 3-4 3 4 2 1 Parent Interface Packet Mark Limit At 80M 70M 60M 60M 20M 30M 20M Max Limit 90M 80M 70M 70M 40M 40M 40M Rate 0.00 bps 0.00 bps 0.00 bps 0.00 bps 0.00 bps 0.00 bps 0.00 bps

Remote
Name ether2 Queue Priority 1 Priority 2-3-4 Priority 2 Priority 3-4 Priority 3 Priority 4 ether2 Queue ether2 Queue Priority 2-3-4 Priority 2-3-4 Priority 3-4 Priority 3-4 3 4 2 1 Parent Interface Packet Mark Limit At 80M 70M 60M 60M 20M 30M 20M Max Limit 90M 80M 70M 70M 40M 40M 40M Rate 0.00 bps 0.00 bps 0.00 bps 0.00 bps 0.00 bps 0.00 bps 0.00 bps

Queued Bytes 0B 0B 0B 0B 0B 0B 0B

Bytes 0B 0B 0B 0B 0B 0B 0B

Packets 0 0 0 0 0 0 0

Queued Bytes 0B 0B 0B 0B 0B 0B 0B

Bytes 0B 0B 0B 0B 0B 0B 0B

Packets 0 0 0 0 0 0 0

Local

Remote

90.0 Mbps 80.0 Mbps 70.0 Mbps 60.0 Mbps 50.0 Mbps 40.0 Mbps 30.0 Mbps 20.0 Mbps 10.0 Mbps 0.0 Mbps Max Min Priority 1 Priority 2 Priority 3 Priority 4 ether1

90.0 Mbps 80.0 Mbps 70.0 Mbps 60.0 Mbps 50.0 Mbps 40.0 Mbps 30.0 Mbps 20.0 Mbps 10.0 Mbps 0.0 Mbps

Limits

Limits

1 2 3

Remote

Max

Min

Priority Priority Priority Priority ether2

1 2 3 4

1 2 3

You might also like