Scribd
Upload
190 views1 page

Coalescer Specification

This document is a technical data sheet for liquid-liquid coalescers from ACS Industries. It requests information about flow conditions, feed composition, product purity requirements, and vessel details to design and quote a coalescer system. Specifications needed include flow rates, temperatures, pressures, materials of construction, phases present, solids content, required purities, vessel pressure and temperature ratings, and corrosion allowance.

Uploaded by

Ioana Popescu
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
190 views1 page

Coalescer Specification

This document is a technical data sheet for liquid-liquid coalescers from ACS Industries. It requests information about flow conditions, feed composition, product purity requirements, and vessel details to design and quote a coalescer system. Specifications needed include flow rates, temperatures, pressures, materials of construction, phases present, solids content, required purities, vessel pressure and temperature ratings, and corrosion allowance.

Uploaded by

Ioana Popescu
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

ACS Industries, LP, SEPARATIONS TECHNOLOGY DIVISION

14211 Industry Road Houston, Texas 77053

800-231-0077
TEL: (713) 434-0934 FAX: (713) 433-6201 E-mail: [email protected]

TECHNICAL DATA SHEET LIQUID-LIQUID COALESCERS


COMPANY INFORMATION
Company: Contact (Name/Title):

Address:

TEL: ( FAX: ( E-mail:

) )

FLOW CONDITIONS
Max. Flow Rate: Min. Flow Rate: __________gpm __________gpm By Pump Operating Temperature: __________F Operating Pressure: __________psig Intermittent Material of Construction: Operating Range: MIN_______% MAX_______%

Feed to Coalescer: By Gravity

Flow pattern: Continuous

Max. Allowable Pressure Drop:

FEED COMPOSITION
Continuous Phase
Name: Qty or %: Density/SG: Viscosity: Feed pH: ______cp

Dispersed Phase
Name: Qty or %: Density/SG: Viscosity: ______cp Name:

Gas (If Present)


Yes Type: Qty or %: ______cp Size: No Qty or %: Density/SG: Viscosity: Corrosive:

Solids

PRODUCT PURITY
Purity of Continuous Phase: Dispersed Phase: ppm ppm % %

VESSEL (ATTACH DRAWING IF EXISTING)


Need Quote for Vessel: Vessel Design Pressure: Corrosion Allowance: Yes No psig Vessel Material: Vessel Design Temperature: ASME Code Stamp Required Yes F No

REMARKS

You might also like