Scribd Logo
Upload

Welcome to Scribd!

  • 56 views

    3.korzeniowski Magnetic Particle

    Uploaded by

    nasrpk
    The document discusses magnetic particle testing (MPT), a non-destructive testing method used to locate surface and subsurface discontinuities in ferromagnetic materials. MPT works by magnetizing the material and applying iron particles that gather at locations of magnetic field leakage caused by defects. The document covers the basic MPT process, types of ferromagnetic materials it can be used on, different magnetization techniques, advantages like being fast and portable, and limitations like not working on non-ferrous metals.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PPT, PDF, TXT or read online from Scribd

    3.korzeniowski Magnetic Particle

    Uploaded by

    nasrpk
    56 views32 pages
    The document discusses magnetic particle testing (MPT), a non-destructive testing method used to locate surface and subsurface discontinuities in ferromagnetic materials. MPT works by magnetizing the material and applying iron particles that gather at locations of magnetic field leakage caused by defects. The document covers the basic MPT process, types of ferromagnetic materials it can be used on, different magnetization techniques, advantages like being fast and portable, and limitations like not working on non-ferrous metals.

    Original Description:

    Korzeniowski_magnetic_particle

    Original Title

    3.Korzeniowski Magnetic Particle

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    PPT, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document discusses magnetic particle testing (MPT), a non-destructive testing method used to locate surface and subsurface discontinuities in ferromagnetic materials. MPT works by magnetizing the material and applying iron particles that gather at locations of magnetic field leakage caused by defects. The document covers the basic MPT process, types of ferromagnetic materials it can be used on, different magnetization techniques, advantages like being fast and portable, and limitations like not working on non-ferrous metals.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PPT, PDF, TXT or read online from Scribd
    Download as ppt, pdf, or txt
    56 views32 pages

    3.korzeniowski Magnetic Particle

    Uploaded by

    nasrpk
    The document discusses magnetic particle testing (MPT), a non-destructive testing method used to locate surface and subsurface discontinuities in ferromagnetic materials. MPT works by magnetizing the material and applying iron particles that gather at locations of magnetic field leakage caused by defects. The document covers the basic MPT process, types of ferromagnetic materials it can be used on, different magnetization techniques, advantages like being fast and portable, and limitations like not working on non-ferrous metals.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PPT, PDF, TXT or read online from Scribd
    Download as ppt, pdf, or txt
    of 32

    Automotive Engineering Phd Eng.

    Marcin Korzeniowski Non Destructive Evaluation in Contemporary Manufacturing Systems

    Lecture 3

    Magnetic Particle Testing

    Magnetic Testing (MT) MAGNETIC PARTICLE INSPECTION


    Method of locating surface and subsurface discontinuities in ferromagnetic materials. When the material or part under test is magnetized, magnetic discontinuities that lie in a direction generally transverse to the direction of the magnetic field cause a leakage field to be formed at and above the surface of the part. The discontinuity, is detected by the use of finely divided ferromagnetic particles applied over the surface, with some of the particles being gathered and held by the leakage field.

    Magnetic Testing (MT)


    Limitation for Magnetic Particle Testing:
    The method can be used only on ferromagnetic materials, For best results, the magnetic field must be in a direction that will intercept the principal plane of the discontinuity; this sometimes requires two or more sequential inspections with different magnetizations, Demagnetization following inspection is often necessary, Post cleaning to remove remnants of the magnetic particles clinging to the surface may sometimes be required after testing and demagnetization, Exceedingly large currents are sometimes needed for very large parts, Care is necessary to avoid local heating and burning of finished parts or surfaces at the points of electrical contact Although magnetic particle indications are easily seen, experience and skill are sometimes needed to judge their significance.

    Magnetic Testing (MT)

    FERROMAGNETIC MATERIALS
    Metals which conduct magnetic field: elements:
    iron, nickel, cobalt,

    alloys:
    cast iron carbon steel

    Ferromagnetic Materials
    A material is considered ferromagnetic if it can be magnetized. Materials with a significant Iron, nickel or cobalt content are generally ferromagnetic.
    Ferromagnetic materials are made up of many regions in which the magnetic fields of atoms are aligned. These regions are call magnetic domains. Magnetic domains point randomly in demagnetized material, but can be aligned using electrical current or an external magnetic field to magnetize the material.
    S

    Demagnetized

    Magnetized

    Magnetic Testing (MT)


    The physical background

    Magnetic Testing (MT)


    Directions of the discontinuities

    Magnetic Testing (MT)

    Magnetic Testing (MT)


    The ways of magnetization

    circular

    Producing a Longitudinal Magnetic Field Using a Coil

    A longitudinal magnetic field is usually established by placing the part near the inside or a coils annulus. This produces magnetic lines of force that are parallel to the long axis of the test part.

    Coil on Wet Horizontal Inspection Unit

    Portable Coil

    Magnetic Testing (MT)


    Magnetized ring
    When a magnetic material is placed across the poles of a horseshoe magnet having square ends, forming a closed or ringlike assembly, the lines of force flow from the north pole through the magnetic material to the south pole

    Magnetic Testing (MT)


    Magnetizing current

    Both direct current (dc) and alternating current (ac) are suitable for magnetizing parts for magnetic particle inspection. The strength, direction, and distribution of magnetic fields are greatly affected by the type of current used for magnetization. The important difference with regard to magnetic particle inspection is that the fields produced by direct current generally penetrate the cross section of the part, while the fields produced by alternating current are confined to the metal at or near the surface of the part, a phenomenon known as the skin effect. Therefore, alternating current should not be used in searching for subsurface discontinuities.

    Magnetic Testing (MT)


    Magnetizing current
    alternate current

    rectified three phase AC

    rectified one phase AC

    Magnetic Testing (MT)


    Yokes

    Two basic types of yokes that are commonly used for magnetizing purposes: permanent-magnet, electromagnetic yokes.

    Both are hand held and therefore quite mobile.

    Magnetic Testing (MT)


    Yokes

    Permanent-magnet yokes are used for applications where a source of electric power is not available or where arcing is not permissible (as in an explosive atmosphere). The limitations of permanent-magnet yokes include the following: Large areas or masses cannot be magnetized with enough strength to produce satisfactory crack indications, Flux density cannot be varied at will, If the magnet is very strong, it may be difficult to separate from a part, Particles may cling to the magnet, possibly obscuring indications.

    Magnetic Testing (MT)


    Yokes

    Electromagnetic yokes Consist of a coil wound around a U-shaped core of soft iron. The legs of the yoke can be either fixed or adjustable. Adjustable legs permit changing the contact spacing and the relative angle of contact to accommodate irregularly-shaped parts. Unlike a permanent-magnet yoke, an electromagnetic yoke can readily be switched on or off. This feature makes it convenient to apply and remove the yoke from the testpiece.

    Magnetic Testing (MT)


    Electromagnetic yokes

    Application of Magnetic Media (Wet Versus Dry)


    MPI can be performed using either dry particles, or particles suspended in a liquid. With the dry method, the particles are lightly dusted on to the surface. With the wet method, the part is flooded with a solution carrying the particles. The dry method is more portable. The wet method is generally more sensitive since the liquid carrier gives the magnetic particles additional mobility.

    Dry Magnetic Particles


    Magnetic particles come in a variety of colors. A color that produces a high level of contrast against the background should be used.

    Wet Magnetic Particles


    Wet particles are typically supplied as visible or fluorescent. Visible particles are viewed under normal white light and fluorescent particles are viewed under ultraviolet light.

    Crane Hook with Service Induced Crack

    Fluorescent, Wet Particle Method

    Gear with Service Induced Crack

    Fluorescent, Wet Particle Method

    Drive Shaft with Heat Treatment Induced Cracks

    Fluorescent, Wet Particle Method

    Splined Shaft with Service Induced Cracks

    Fluorescent, Wet Particle Method

    Threaded Shaft with Service Induced Crack

    Fluorescent, Wet Particle Method

    Large Bolt with Service Induced Crack

    Fluorescent, Wet Particle Method

    Crank Shaft with Service Induced Crack Near Lube Hole

    Fluorescent, Wet Particle Method

    Lack of Fusion in SMAW Weld


    Indication

    Visible, Dry Powder Method

    Toe Crack in SMAW Weld

    Visible, Dry Powder Method

    Advantages of Magnetic Particle Inspection


    Can detect both surface and near sub-surface defects. Can inspect parts with irregular shapes easily. Precleaning of components is not as critical as it is for some other inspection methods. Most contaminants within a flaw will not hinder flaw detectability. Fast method of inspection and indications are visible directly on the specimen surface. Considered low cost compared to many other NDT methods. Is a very portable inspection method especially when used with battery powered equipment.

    Limitations of Magnetic Particle Inspection


    Cannot inspect non-ferrous materials such as aluminum, magnesium
    or most stainless steels. Inspection of large parts may require use of equipment with special power requirements. Some parts may require removal of coating or plating to achieve desired inspection sensitivity. Limited subsurface discontinuity detection capabilities. Maximum depth sensitivity is approximately 0.6 (under ideal conditions). Post cleaning, and post demagnetization is often necessary. Alignment between magnetic flux and defect is important

    You might also like