Scribd
Upload
259 views

Xilinx FPGA Design Using Simulink With Hardware Co-Simulation

The document discusses using Simulink to design FPGA systems with Xilinx tools. It describes the toolchain, basic elements like gateways and memory blocks, and demonstrates an FFT calculation on FPGA with hardware co-simulation.

Uploaded by

vlsijp
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
259 views

Xilinx FPGA Design Using Simulink With Hardware Co-Simulation

The document discusses using Simulink to design FPGA systems with Xilinx tools. It describes the toolchain, basic elements like gateways and memory blocks, and demonstrates an FFT calculation on FPGA with hardware co-simulation.

Uploaded by

vlsijp
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 19

Outline

Introduction

Design toolchain

Basic Elements

Demo - FFT calculation

Summary

Xilinx FPGA design using Simulink with Hardware Co-Simulation


Mikolaj Chwalisz ([email protected])
Technische Universit at Berlin Telecommunication Networks Group (TKN)

April 28, 2011

TKN

Telecommunication Networks Group

Outline

Introduction

Design toolchain

Basic Elements

Demo - FFT calculation

Summary

Outline

Introduction Design toolchain Basic Elements Demo - FFT calculation Summary

2 / 17

Outline

Introduction

Design toolchain

Basic Elements

Demo - FFT calculation

Summary

Simulink based FPGA design model


Simulink Environment for multidomain simulation and Model-Based Design for dynamic and embedded systems. Xilinx System Generator High-level tool for designing high-performance DSP systems using FPGAs. Replace HDL language with Simulink blocks Xilinx Blockset contains many functions Possibility to use HDL modules as black boxes Ease of simulation and testbench Compilation to bitstream, HDL, hardware co-simulation
3 / 17

Outline

Introduction

Design toolchain

Basic Elements

Demo - FFT calculation

Summary

Hardware co-simulation

Incorporate hardware into Simulink design Speed up simulation with hardware in the loop Automatic data exchange Supports Xilinx FPGA chips with JTAG programming

4 / 17

Outline

Introduction

Design toolchain

Basic Elements

Demo - FFT calculation

Summary

Toolchain
Required software

Matlab Matlab Simulink

ISE Design Suite EDK System Generator

Additional software: Mentor Modelsim


5 / 17

Outline

Introduction

Design toolchain

Basic Elements

Demo - FFT calculation

Summary

Toolchain
Required software

Matlab 7.4.0.287 (R2007a) Matlab Simulink 6.6 (R2007a)

ISE Design Suite v10.1.03 EDK v10.1.03 System Generator 10.1.3.1386 Xilinx ISE v10.1 is the last one supporting Virtex II chips Additional software: Mentor Modelsim
5 / 17

Sensitive to version changes One System Generator supports only two Matlab versions

Outline

Introduction

Design toolchain

Basic Elements

Demo - FFT calculation

Summary

Outline

Introduction Design toolchain Basic Elements Demo - FFT calculation Summary

6 / 17

Outline

Introduction

Design toolchain

Basic Elements

Demo - FFT calculation

Summary

Simple example

System Generator Input/Output Gateway Xilinx blocks Any Simulink blocks

Gateways are Top-level output in compilation results Between gateways there are only Xilinx blocks Outside gateways can be all other blocks
7 / 17

Outline

Introduction

Design toolchain

Basic Elements

Demo - FFT calculation

Summary

System Generator

Most important block Must be at Top-level in every Simulink model Allows compilation of the design

8 / 17

Outline

Introduction

Design toolchain

Basic Elements

Demo - FFT calculation

Summary

System Generator compilation targets

HDL Netlist
VHDL Verilog

Bitstream Hardware co-simulation


JTAG
FPGA programming Data exchange

Ethernet
Data exchange Point-to-point Network based

9 / 17

Outline

Introduction

Design toolchain

Basic Elements

Demo - FFT calculation

Summary

Gateways

Name is transferred to the generated IP Fixed binary point arithmetic Important to set Output data type
number of bits binary point

10 / 17

Outline

Introduction

Design toolchain

Basic Elements

Demo - FFT calculation

Summary

Basic elements

11 / 17

Outline

Introduction

Design toolchain

Basic Elements

Demo - FFT calculation

Summary

Memory library

12 / 17

Outline

Introduction

Design toolchain

Basic Elements

Demo - FFT calculation

Summary

Outline

Introduction Design toolchain Basic Elements Demo - FFT calculation Summary

13 / 17

Outline

Introduction

Design toolchain

Basic Elements

Demo - FFT calculation

Summary

Simulink model

Signal generated in Simulink. Sum of 2 sine waves and noise 512point FFT Delay block on done line
14 / 17

Outline

Introduction

Design toolchain

Basic Elements

Demo - FFT calculation

Summary

Hardware-Software Co-Simulation

Simulink subsystem with Xilinx blocks Compiled Co-Simulation block


Automatic JTAG connection FPGA conguration at simulation start
15 / 17

Outline

Introduction

Design toolchain

Basic Elements

Demo - FFT calculation

Summary

Demo results

Calculated FFT

Done, synchronization pulse

Original signal

16 / 17

Outline

Introduction

Design toolchain

Basic Elements

Demo - FFT calculation

Summary

Summary
Simulink as FPGA design tool Easy to use No need of HDL knowledge Multiple ready blocks Hardware-Software Co-Simulation Xilinx System Generator brings hardware into simulation Problems Sensitive to version changes Complicated and long toolchain

17 / 17

Outline

Introduction

Design toolchain

Basic Elements

Demo - FFT calculation

Summary

Xilinx FPGA design using Simulink with Hardware Co-Simulation


Mikolaj Chwalisz ([email protected])
Technische Universit at Berlin Telecommunication Networks Group (TKN)

April 28, 2011

TKN

Telecommunication Networks Group

18 / 17

You might also like