Scribd
Upload
51 views

Dynamic Calculation

This document contains input data for dynamic ground analysis and machine vibration calculations. It provides dynamic Young's modulus, elastic uniform compression coefficient, and damping coefficient for the ground data. It also lists the weight, center of gravity, and inertial properties of various machine equipment. Calculations are shown for steady state dynamic forces on individual machine rotors. The output data section summarizes that the system eccentricity and maximum pressure on the ground are within acceptable limits. It also verifies that the foundation can support the machine weight, frequency ratios are acceptable, and maximum displacement meets the criteria.

Uploaded by

Anonymous h87K4sT
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
51 views

Dynamic Calculation

This document contains input data for dynamic ground analysis and machine vibration calculations. It provides dynamic Young's modulus, elastic uniform compression coefficient, and damping coefficient for the ground data. It also lists the weight, center of gravity, and inertial properties of various machine equipment. Calculations are shown for steady state dynamic forces on individual machine rotors. The output data section summarizes that the system eccentricity and maximum pressure on the ground are within acceptable limits. It also verifies that the foundation can support the machine weight, frequency ratios are acceptable, and maximum displacement meets the criteria.

Uploaded by

Anonymous h87K4sT
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
You are on page 1/ 3

GROUND DATA

DYNAMIC GROUND DATA Dynamic Young's modulus: E = G x 2( 1+v ) with: G = shear modulus v = Poisson's coefficent

2 82320 t /m

29400 t /m 0.4

Elastic uniform compression coefficient:

Cu

E 1 CS 2 1 A

3 15461 t /m

with: A = foundation area LxB L = length of fnd. B = width of fnd. H = height of fnd. Cs = Barkan's Theory coeff =L/B 1 1.5 2 3 5 10 Cs 1.06 1.07 1.09 1.13 1.22 1.41

49.5 11 4.5 1.6 1.11 2.44

m m m m

Damping coefficient

5 %

Pagina 1

MACHINES DATA
INPUT DATA EQUIPT. POMPE COUPLEUR MOTEUR SKID & AUX WEIGHT (kg) 5900 12800 19300 19960 CENTER OF GRAVITY X Y Z (m) (m) (m) 1.710 4.465 8.175 5.875 2.701 2.326 1.646 2.064 3.283 2.973 3.413 2.925

TOTAL

57960

5.592

2.204

1.329

INERTIAL MASS AND FREQUENCY DATA CENTER OF GRAVITY X Y Z (m) (m) (m) 1.710 4.465 8.175 2.701 2.326 1.646 3.283 2.973 3.413 FREQUENCY (rpm) 5750 1491 1491 ROTOR W. (kg) 145 1645 5530

ROTORS 1 2 3

DESCRIPTION POMPE COUPLEUR MOTEUR

CALCULATION OF STEADY STATE DYNAMIC FORCES ROTORS 1 2 3 DESCRIPTION FREQ. rpm POMPE COUPLEUR MOTEUR 5750 1491 1491 W (t) 0.145 1.645 5.53 Fd (kN) 0.13896 0.40878 1.37421

with Fd= W x Freq / 6000

Pagina 2

OUTPUT DATA
SYSTEM MACHINE+FOUNDATION ECCENTRICITY Eccentricity of system's C.o.G. respect fnd dimensions: ex = ey = 0.835 < 5% -1.019 < 5% OK! OK!

PRESSURE ON GROUND T = with MAX = 41.51 kN/m2 < 0,6 max =120kPa OK! 2 200 kN/m

WEIGHT CONTROL Control foundation weight - machine weight ratio: Foundation weight WF Equipment weight WE WF / WE 198 t 57.96 t 3.42 OK!

FREQUENCY RATIO Equipment freq. F= rpm x 6,28/60 F= 302 rad/s with: rpm = 2890 System frequency Fs = F / Fs = 209.42 rad/s 1.44

VIBRATIONS AMPLITUDE CONTROL Max displacement d= 4.65E-6 m <10e-6 OK!

Pagina 3

You might also like