Scribd
Upload
306 views1 page

Description: Plan 02 Is A Dead-Ended Seal Chamber With No

Plan 02 is a dead-ended seal chamber that does not recirculate flush fluid and is often used with a jacketed seal chamber to control temperature in high temperature processes when adequate vapor margin is present. It requires little to no maintenance and prevents process solids from continuously entering the seal chamber. Plan 62 is similar but requires an open throat and tapered seal chamber with flow modifiers to create circulation and remove solids while helping to ensure proper flooding, venting and draining of the chamber.

Uploaded by

m_stasys9939
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
306 views1 page

Description: Plan 02 Is A Dead-Ended Seal Chamber With No

Plan 02 is a dead-ended seal chamber that does not recirculate flush fluid and is often used with a jacketed seal chamber to control temperature in high temperature processes when adequate vapor margin is present. It requires little to no maintenance and prevents process solids from continuously entering the seal chamber. Plan 62 is similar but requires an open throat and tapered seal chamber with flow modifiers to create circulation and remove solids while helping to ensure proper flooding, venting and draining of the chamber.

Uploaded by

m_stasys9939
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Description: Plan 02 is a dead-ended seal chamber with no recirculation of flush fluid.

Objective: Often used with a jacketed seal chamber to control temperature in high temperature processes. Use only when adequate vapor margin is present in the seal chamber. Advantages: Little to no maintenance. Process solids are not continuously introduced into seal chamber. Plan 62 with steam can provide additional heating or cooling and minimize coking on hot processes.
Similar to Plan 02 but must have an open throat, tapered seal chamber with flow modifiers to create circulation and aid in removal of solids. Helps insure proper flooding, venting and draining of chamber.

You might also like