Scribd Logo
Upload

Welcome to Scribd!

  • 92 views

    English Unit Spec Sheet

    Uploaded by

    Danang Prakosa
    This document is a specification sheet for a shell and tube heat exchanger. It provides key design parameters and performance details, including the type and quantities of fluids, inlet and outlet temperatures, pressures and flow rates. Construction details are given for the shell, tubes and internals. Design requirements for pressure, temperature and materials are specified. Heat transfer calculations and plots of property data are also included.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd

    English Unit Spec Sheet

    Uploaded by

    Danang Prakosa
    92 views3 pages
    This document is a specification sheet for a shell and tube heat exchanger. It provides key design parameters and performance details, including the type and quantities of fluids, inlet and outlet temperatures, pressures and flow rates. Construction details are given for the shell, tubes and internals. Design requirements for pressure, temperature and materials are specified. Heat transfer calculations and plots of property data are also included.

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document is a specification sheet for a shell and tube heat exchanger. It provides key design parameters and performance details, including the type and quantities of fluids, inlet and outlet temperatures, pressures and flow rates. Construction details are given for the shell, tubes and internals. Design requirements for pressure, temperature and materials are specified. Heat transfer calculations and plots of property data are also included.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    92 views3 pages

    English Unit Spec Sheet

    Uploaded by

    Danang Prakosa
    This document is a specification sheet for a shell and tube heat exchanger. It provides key design parameters and performance details, including the type and quantities of fluids, inlet and outlet temperatures, pressures and flow rates. Construction details are given for the shell, tubes and internals. Design requirements for pressure, temperature and materials are specified. Heat transfer calculations and plots of property data are also included.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 3

    SPECIFICATION SHEET SHELL AND TUBE EXCHANGER

    R E V I S I O N EXCHST02 (11/04) NUMBER 0 By Date Originator Check Approved Issued (English Units) By 1 Date By 2 Date By 3 Date Job No. Client Location Item No. Process Unit Document No. Client Document No. Fabricator Page

    Engineered by KBR Technical Services, Inc.

    of

    1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61

    Service of Unit Size Surface/Unit (Eff.) PERFORMANCE OF ONE UNIT Fluid Allocation Fluid Name Fluid Quantity, Total Vapor (In/Out) Liquid Steam Water Noncondensable/MW Temperature (In/Out) Density (Vapor/Liquid) Viscosity (Vapor/Liquid) Molecular Weight, Vapor Specific Heat (Vapor/Liquid) Thermal Conductivity (Vapor/Liquid)

    No. of Units Type ft Shells/Unit Connected in Surface/Shell (Eff.) SHELL SIDE lb/hr lb/hr lb/hr lb/hr lb/hr lb/hr F lb/ft cP Btu/lb F Btu/hr ft F Parallel Series ft

    TUBE SIDE

    Latent Heat Inlet Pressure Velocity Pressure Drop (Allowable/Calculated) Fouling Resistance (Min.) Heat Exchanged Transfer Rate (Service/Clean) CONSTRUCTION OF ONE SHELL Design Pressure/Vacuum Pressure Design Temperature (Max/Min) Corrosion Allowance No. of Passes per Shell Connections In Size & Out Rating Tube No. OD Tube Type Shell Channel or Bonnet Tubesheet - Stationary Floating Head Cover Baffles - Cross Type Baffles - Long Supports - Tube Bypass Seal Arrangement Expansion Joint Gaskets - Shell Side Code Requirements REMARKS: psig F in

    Btu/lb psig ft/s psi hr ft F/Btu Btu/hr MTD (Corrected) (Weighted) F Btu/hr ft F

    SHELL SIDE / /

    TUBE SIDE / /

    in Thk ID OD

    in

    Tube Side

    Length ft Pitch Material in Shell Cover Channel Cover Tubesheet - Floating Impingement Protection No. Crosspasses % Cut Seal Type Type Tube - Tubesheet Joint Metal Temp. for Expansion (Shell/Tube) Floating Head Stamp TEMA Class

    in Flow Angle

    Deg.

    Central Spacing

    in

    C:\Documents and Settings\hbd6855\Desktop\[Shell and Tube.xls]

    SPECIFICATION SHEET SHELL AND TUBE EXCHANGER


    Job No. Client Location Item No. Process Unit Document No. Client Document No. #REF! #REF! #REF! #REF! #REF! #REF! #REF! Page

    Engineered Engineeredby byKBR KBR Technical TechnicalServices, Services,Inc Inc

    of #####

    Heat Release Curve


    1.00
    Fluid Name: Pressure psi (abs) Temp. F Ref. Pressure 1: Enthalpy Btu/lb psi (abs) Mass Vapor Fraction

    1.000 0.800 0.600 0.400 0.200 0.000 Temperature (F) Enthalpy Mass Vapor Frac Mass Vapor Fraction
    Liq. Crit. Temp. F

    0.80 Enthalpy (BTU/LB) 0.60 0.40 0.20 0.00

    Density Vapor lb/ft3

    Density Liquid lb/ft3

    Viscosity Vapor cP

    Viscosity Liquid cP

    Thermal Cond., Vap Btu/hr-ft-F

    Thermal Cond., Liq Btu/hr-ft-F

    Sp. Heat Vapor Btu/lb-F

    Sp. Heat Liquid Btu/lb-F

    Surface Tension DYNE/cm

    Liquid Critical Press. psia

    Fluid Name: Pressure psi (abs) Temp. F

    Ref. Pressure 2: Enthalpy Btu/lb

    psi (abs) Mass Vapor Fraction

    Heat Release Curve


    1.00 0.80 Enthalpy (BTU/LB) 0.60 0.40 0.20 Enthalpy 0.00 1.000 0.800 0.600 0.400 0.200 Mass Vapor Frac 0.000 Temperature (F) Mass Vapor Fraction
    Liq. Crit. Temp. F

    Density Vapor lb/ft3

    Density Liquid lb/ft3

    Viscosity Vapor cP

    Viscosity Liquid cP

    Thermal Cond., Vap Btu/hr-ft-F

    Thermal Cond., Liq Btu/hr-ft-F

    Sp. Heat Vapor Btu/lb-F

    Sp. Heat Liquid Btu/lb-F

    Surface Tension DYNE/cm

    Liquid Critical Press. psia

    SPECIFICATION SHEET SHELL AND TUBE EXCHANGER


    Job No. Client Location Item No. Process Unit Document No. Client Document No. #REF! #REF! #REF! #REF! #REF! #REF! #REF! Page

    Engineered by KBR Technical Services, Inc

    of #####

    Heat Release Curve


    1.00
    Fluid Name: Pressure psi (abs) Temp. F Ref. Pressure 1: Enthalpy Btu/lb psi (abs) Mass Vapor Fraction

    1.000 0.800 0.600 0.400 0.200 0.000 Temperature (F) Enthalpy Mass Vapor Frac Mass Vapor Fraction Mass Vapor Fraction

    0.80 Enthalpy (BTU/LB) 0.60 0.40 0.20 0.00

    Density Vapor lb/ft3

    Density Liquid lb/ft3

    Viscosity Vapor cP

    Viscosity Liquid cP

    Thermal Cond., Vap Btu/hr-ft-F

    Thermal Cond., Liq Btu/hr-ft-F

    Sp. Heat Vapor Btu/lb-F

    Sp. Heat Liquid Btu/lb-F

    Surface Tension DYNE/cm

    Liquid Critical Press. psia

    Liq. Crit. Temp. F

    Fluid Name: Pressure psi (abs) Temp. F

    Ref. Pressure 2: Enthalpy Btu/lb

    psi (abs) Mass Vapor Fraction

    1.00 0.90 0.80 0.70 0.60 0.50 0.40 0.30 0.20 0.10 0.00

    Heat Release Curve

    1.000 0.900 0.800 0.700 0.600 0.500 0.400 0.300 0.200 0.100 0.000

    Enthalpy (BTU/LB)

    Temperature (F) Enthalpy


    Density Vapor lb/ft3 Density Liquid lb/ft3 Viscosity Vapor cP Viscosity Liquid cP Thermal Cond., Vap Btu/hr-ft-F Thermal Cond., Liq Btu/hr-ft-F Sp. Heat Vapor Btu/lb-F Sp. Heat Liquid Btu/lb-F Surface Tension DYNE/cm

    Mass Vapor Frac


    Liquid Critical Press. psia Liq. Crit. Temp. F

    Form API/ISO ST SPEC SHT (05/00)

    English Units

    You might also like