Scribd
Upload
293 views9 pages

Workbook Milling Practice CNC

This document introduces a workbook of CNC milling programming exercises intended to consolidate knowledge of numerical control milling. It contains 8 practice exercises of increasing complexity involving profiles, cutter compensation, absolute and relative programming, multiple tools, and pocketing. The exercises can be accessed and run within the SIMUL CNC software for validation and feedback.

Uploaded by

kree_bigdaddy
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
293 views9 pages

Workbook Milling Practice CNC

This document introduces a workbook of CNC milling programming exercises intended to consolidate knowledge of numerical control milling. It contains 8 practice exercises of increasing complexity involving profiles, cutter compensation, absolute and relative programming, multiple tools, and pocketing. The exercises can be accessed and run within the SIMUL CNC software for validation and feedback.

Uploaded by

kree_bigdaddy
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 9

WORKBOOK EXERCISES MILLING

Welcome to workbooks SIMUL CNC milling. This book offers a set of exercises to perform alone or in a training session in order to consolidate your knowledge of numerical control milling programming. http://www.cnc-pad.com/simul-cnc.php All practical work present in this workbook are integrated into the SIMUL CNC Software with their correction and help so you can at any time open the tab Previous in software to enable integrated practical work. For this enter Code at the top of each year directly into the software and then press OK.

Activation of exercise causes the appearance of the block of control of the exercise at the bottom right:

When you feel that the path and the program is correct: click on the button control for the validation of the trajectory, and error receive help and advice on each exercise.

WORKBOOK EXERCISES MILLING

PRACTICE 1

CODE P : A1MILL

Objectives of the exercise :

- Language : Fanuc - Make profile and use cutter compensation G41 - Use CNC G90 Absolute Programming - Use tool T1 - Thickness of the workpiece: Z-20

WORKBOOK EXERCISES MILLING

PRACTICE 2

CODE P : A2MILL

Objectives of the exercise :

- Language : Fanuc - Make profile and use cutter compensation G41 - Use CNC G90 Absolute Programming - Use tool T1 - Thickness of the workpiece: Z-20

WORKBOOK EXERCISES MILLING

PRACTICE 3

CODE P : A3MILL

Objectives of the exercise :

- Language : Fanuc - Make profile and use cutter compensation G41 - Use CNC G91 Relative Programming - Use tool T1 - Thickness of the workpiece: Z-20

WORKBOOK EXERCISES MILLING

PRACTICE 4

CODE P : A4MILL

Objectives of the exercise :

- Language : Fanuc - Make profile and use cutter compensation G41 - Use CNC G90 Absolute Programming - Use tool T1 - Thickness of the workpiece: Z-20

WORKBOOK EXERCISES MILLING

PRACTICE 5

CODE P : A5MILL

Objectives of the exercise :

- Language : Fanuc - Make profile and use cutter compensation G41 - Use CNC G90 Absolute Programming - Use tool T1 - Thickness of the workpiece: Z-20

WORKBOOK EXERCISES MILLING

PRACTICE 6

CODE P : A6MILL

Objectives of the exercise :

- Language : Fanuc - Make profile and use cutter compensation G42 - Use CNC G90 Absolute Programming - Use tool T1 - Thickness of the workpiece: Z-20

WORKBOOK EXERCISES MILLING

PRACTICE 7

CODE P : A7MILL

Objectives of the exercise :

- Language : Fanuc - Use tools T1 and T2 - Thickness of the workpiece : Z-20 Profondeur de lvidement central : Z-10

WORKBOOK EXERCISES MILLING

PRACTICE 8

CODE P : A8MILL

Objectives of the exercise :

- Language : Fanuc - Use tool T1 (diameter 16 mm) - Thickness of the workpiece : Z-20

You might also like