Scribd
Upload
230 views1 page

Wind Load Calculations

This document contains load calculations for a building frame. It provides details on the building dimensions, dead loads from the roofing materials, live loads from occupancy, and wind loads calculated based on basic wind speed and pressure coefficients. The wind loads are summarized in diagrams showing load values across and parallel to the ridge for different internal pressure conditions.

Uploaded by

nsuthar
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
230 views1 page

Wind Load Calculations

This document contains load calculations for a building frame. It provides details on the building dimensions, dead loads from the roofing materials, live loads from occupancy, and wind loads calculated based on basic wind speed and pressure coefficients. The wind loads are summarized in diagrams showing load values across and parallel to the ridge for different internal pressure conditions.

Uploaded by

nsuthar
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
You are on page 1/ 1

LOAD CALCULATIONS

Job No. Project Clint Description

: : : :

Rev. No. Date Designed by Checked by

LOADS APPLIED ON THE MAIN FRAME-1

: : : :

R0 15/02/2014 SANDEEP

Building Type
Length (o/o) Width (o/o) Width module Bay spacing Clear eave height Max. eave height Roof slope () Wt. of sheet & purline Dead Load (DL)

=
= = = = = = = = = 82.00 m 40.50 m 7.00 7.00 8.00 5.71 m m m DEAD LOAD (DL) 15.00 Kg/m 1.05 KN/m COLLATERAL LOAD

Collateral Load on Rafter

= =

0.00 Kg/m 0.00 KN/m LIVE LOAD (LL)

Other Collateral Load

= =

0.00 Kg/m 0.00 KN/m

Live load/unit area, roof Live Load (LL)

= =

75.00 Kg/m 5.25 KN/m WIND LOAD (WL)

Basic wind speed (Vb) Design wind speed (Vz) where,

= 39 m/s = Vbxk1xk2xk3 k1 = probability factor (risk coefficient) = 1 k2 = terrain, height and structure size factor = 0.93 k3 = topography factor = 1 Vz = 36.27 m/s

Terrain Category 2

Class B

Design wind pressure (pz)

= pz =

0.6xVz 0.789 KN/m PRESURE COEFFICIENTS:~

Encloser condition of the building = Enclosed Internal pressure coeff.(Cpi) = 0.20 h/w = 0.20 = h/w<=1/2 l/w = 2.02 = 3/2<=l/w<4 External pressure coeff.(Cpe) : Wind Angle () 0 degree 90 degree

Table 4 Coeff. For Wall Left Right 0.70 -0.25 -0.50 -0.50

Table 5 Coeff. For Roof Left Right -0.9350 -0.40 -0.80 -0.80

WIND LOAD DIAGRAMS:~ Wind Across the Ridge (With -Ve Cpi) -0.74 -4.06 KN/m -0.20 Wind Across the Ridge (With +Ve Cpi) -1.14 -6.271 KN/m -0.60 KN/m -3.32

-1.11KN/m

KN/m 4.97 0.90

KN/m -0.28 -0.05

KN/m 2.76 0.50

KN/m -2.49 -0.45

Wind Parallel to Ridge(With +Ve Cpi) -1.00 -5.53 KN/m -1.00

-5.53 KN/m

KN/m -3.87 -0.70

KN/m -3.87 -0.70

Wind Parallel to Ridge(With -Ve Cpi) -0.60 -3.32 KN/m -0.60

-3.32 KN/m

KN/m -1.66 -0.30

KN/m 0.00 -0.30 Note: 1) Values within the circles are the UDL 2) -Ve value means, load applied away from structure.

You might also like