0% found this document useful (0 votes)
40 views3 pages

Model P232/P233 24Mm Rotary Potentiometer Sealed/ Dust Proof Long Life Element 2 Million Cycle Life Metal Shaft/ Bushing Rohs Compliant

This document provides specifications for the Model P232/P233 24mm rotary potentiometer. The potentiometer has a long life element with a 2 million cycle life. It has a metal shaft and bushing and is RoHS compliant. The resistance range is 1k-1m ohms with a tolerance of ±10%. It has a maximum voltage of 200Vdc, power rating of 0.5W, and can operate from -10°C to +85°C. Ordering information includes options for seals, tapers, shaft lengths, and standard resistance values from 500 ohms to 1 megohm.

Uploaded by

Peter Bird
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
40 views3 pages

Model P232/P233 24Mm Rotary Potentiometer Sealed/ Dust Proof Long Life Element 2 Million Cycle Life Metal Shaft/ Bushing Rohs Compliant

This document provides specifications for the Model P232/P233 24mm rotary potentiometer. The potentiometer has a long life element with a 2 million cycle life. It has a metal shaft and bushing and is RoHS compliant. The resistance range is 1k-1m ohms with a tolerance of ±10%. It has a maximum voltage of 200Vdc, power rating of 0.5W, and can operate from -10°C to +85°C. Ordering information includes options for seals, tapers, shaft lengths, and standard resistance values from 500 ohms to 1 megohm.

Uploaded by

Peter Bird
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

Model P232/P233 24mm Rotary Potentiometer Sealed/ Dust Proof Long Life Element 2 Million Cycle Life Metal

Shaft/ Bushing RoHS Compliant


MODEL STYLE
Side Adjust, Solder Lugs, Single-Gang Side Adjust, Solder Lugs, Dual-Gang P232 P233

ELECTRICAL1
Resistance Range, Ohms Standard Resistance Tolerance Residual Resistance Input Voltage, Maximum Power rating, Watts Dielectric Strength Insulation Resistance, Minimum Peak Noise (Contact Resistance Variation) @ 6 rpm Linearity Actual Electrical Travel, Nominal Gang Error 1K-1M (for B taper) 5K-1M (for other tapers) 10% 3 ohms max. 200 Vdc max. 0.5W- B taper, 0.3W- others 500Vac, I minute 100M ohms at 1,000Vdc/ 1 minute 3% max. 3% max. 280 3dB (-40dB to 0dB)

MECHANICAL
Total Mechanical Travel Static Stop Strength, Minimum Rotational Torque, Maximum, Single Gang (P232) Rotational Torque, Maximum, Dual Gang (P233) 300 5 120 oz-in 1.5 oz-in 3.0 oz-in

ENVIRONMENTAL
Operating Temperature Range Rotational Life -10C to +85C 2,000,000 cycles

Specifications subject to change without notice.

BI Technologies Corporation 4200 Bonita Place, Fullerton, CA 92835 USA Phone: 714 447 2345 May 1, 2009 Website: www.bitechnologies.com
page 1 of 3

BI technologies

Model P232/P233
ORDERING INFORMATION2

P232 S E C 20 B R100K
Total Resistance Model Series Seal Type: S = Sealed D = Dust Proof Tapers: A = Audio B = Linear C = Reverse Audio Shaft Length L see below

Shaft Type

Full CCW Shaft Position: see below

Shaft Types

Shaft Position (F-Type Shaft) Dashed lines on Type C and Type A shows position of adjustment slot for E-Type shaft

STANDARD RESISTANCE VALUES, OHMS


500 1K 2K 5K 10K 20K 50K 100K 200K 500K 1M

Contact our customer service for custom designs and features.

BI Technologies Corporation 4200 Bonita Place, Fullerton, CA 92835 USA Phone: 714 447 2345 May 1, 2009 Website: www.bitechnologies.com
page 2 of 3

BI technologies

Model P232/P233

OUTLINE DRAWING

Model P232

Model P233

CIRCUIT DIAGRAM
P232 (Single gang) P233 (Dual gang)

BI Technologies Corporation 4200 Bonita Place, Fullerton, CA 92835 USA Phone: 714 447 2345 May 1, 2009 Website: www.bitechnologies.com
page 3 of 3

BI technologies

You might also like