0% found this document useful (0 votes)

820 views

InDesign CS4 Scripting Guide

Developer documentation by adobe

Uploaded by

Petr Mánek

Available Formats

Download as PDF, TXT or read online on Scribd

0% found this document useful (0 votes)

820 views

InDesign CS4 Scripting Guide

Developer documentation by adobe

Uploaded by

Petr Mánek

Available Formats

Download as PDF, TXT or read online on Scribd

You are on page 1/ 168

ADOBE INDESIGN CS4

ADOBE INDESIGN CS4 SCRIPTING GUIDE: JAVASCRIPT

2008 Adobe Systems Incorporated. All rights reserved.

Adobe InDesign CS4 Scripting Guide: JavaScript If this guide is distributed with software that includes an end user agreement, this guide, as well as the software described in it, is furnished under license and may be used or copied only in accordance with the terms of such license. Except as permitted by any such license, no part of this guide may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, recording, or otherwise, without the prior written permission of Adobe Systems Incorporated. Please note that the content in this guide is protected under copyright law even if it is not distributed with software that includes an end user license agreement. The content of this guide is furnished for informational use only, is subject to change without notice, and should not be construed as a commitment by Adobe Systems Incorporated. Adobe Systems Incorporated assumes no responsibility or liability for any errors or inaccuracies that may appear in the informational content contained in this guide. Please remember that existing artwork or images that you may want to include in your project may be protected under copyright law. The unauthorized incorporation of such material into your new work could be a violation of the rights of the copyright owner. Please be sure to obtain any permission required from the copyright owner. Any references to company names in sample templates are for demonstration purposes only and are not intended to refer to any actual organization. Adobe, the Adobe logo, Creative Suite, and InDesign are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries. Microsoft and Windows are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. Mac OS is a trademark of Apple Computer, Incorporated, registered in the United States and other countries. All other trademarks are the property of their respective owners. Adobe Systems Incorporated, 345 Park Avenue, San Jose, California 95110, USA. Notice to U.S. Government End Users. The Software and Documentation are Commercial Items, as that term is defined at 48 C.F.R. 2.101, consisting of Commercial Computer Software and Commercial Computer Software Documentation, as such terms are used in 48 C.F.R. 12.212 or 48 C.F.R. 227.7202, as applicable. Consistent with 48 C.F.R. 12.212 or 48 C.F.R. 227.7202-1 through 227.7202-4, as applicable, the Commercial Computer Software and Commercial Computer Software Documentation are being licensed to U.S. Government end users (a) only as Commercial Items and (b) with only those rights as are granted to all other end users pursuant to the terms and conditions herein. Unpublished-rights reserved under the copyright laws of the United States. Adobe Systems Incorporated, 345 Park Avenue, San Jose, CA 95110-2704, USA. For U.S. Government End Users, Adobe agrees to comply with all applicable equal opportunity laws including, if appropriate, the provisions of Executive Order 11246, as amended, Section 402 of the Vietnam Era Veterans Readjustment Assistance Act of 1974 (38 USC 4212), and Section 503 of the Rehabilitation Act of 1973, as amended, and the regulations at 41 CFR Parts 60-1 through 60-60, 60-250, and 60-741. The affirmative action clause and regulations contained in the preceding sentence shall be incorporated by reference.

Contents
1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
How to Use the Scripts in This Document . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 About the structure of the scripts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 For More Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Scripting Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Script preferences . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Getting the current script . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Script versioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Targeting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Compilation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Interpretation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 11 11 11

Using the doScript method . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Sending parameters to doScript . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Returning values from doScript . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Controlling Undo with doScript . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Working with script labels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Running scripts at start-up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Session and main script execution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Documents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Basic document operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Creating a new document . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Opening a document . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Saving a document . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Closing a document . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Basic page layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Defining page size and document length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Defining bleed and slug areas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Setting page margins and columns . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Changing the appearance of the pasteboard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Guides and grids . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Changing measurement units and ruler . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Defining and applying document presets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Setting up master spreads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Adding XMP metadata . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Creating a document template . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Printing a document . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Printing using page ranges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Setting print preferences . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Printing with printer presets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 18 18 19 19 20 20 20 22 23 24 26 27 29 31 31 36 36 36 39

Contents

Exporting a document as PDF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Exporting to PDF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Setting PDF export options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Exporting a range of pages to PDF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Exporting individual pages to PDF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Exporting pages as EPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Exporting all pages to EPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Exporting a range of pages to EPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Exporting as EPS with file naming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

39 39 40 41 42 42 43 43 43

Working with Page Items . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

Creating Page Items . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 Page Item Geometry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 Grouping Page Items . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 Duplicating and Moving Page Items . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Creating Compound Paths . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Using Pathfinder Operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Converting Page Item Shapes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Arranging Page Items . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Transforming Page Items . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Using the transform method . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Working with transformation matrices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Coordinate spaces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Transformation origin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Resolving locations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Transforming points . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Transforming again . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 49 50 51 51 51 52 52 54 55 57 57 58

Resize and Reframe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

Text and Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

Entering and importing text . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Creating a text frame . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Adding text . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Stories and text frames . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Replacing text . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Inserting special characters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 60 61 61 62 62

Placing text and setting text-import preferences . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63 Exporting text and setting text-export preferences . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67 Understanding text objects . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Working with text selections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Moving and copying text . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Text objects and iteration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Working with text frames . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Linking text frames . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Unlinking text frames . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Removing a frame from a story . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Splitting all frames in a story . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Creating an anchored frame . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71 73 73 75 76 76 77 77 79 79

Contents

Formatting text . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Setting text defaults . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Working with fonts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Applying a font . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Changing text properties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Changing text color . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Creating and applying styles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Deleting a style . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Importing paragraph and character styles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Finding and changing text . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . About find/change preferences . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Finding and changing text . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Finding and changing text formatting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Using grep . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Using glyph search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

80 80 83 84 84 87 87 89 89 90 90 91 91 92 94

Working with tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95 Path text . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98 Autocorrect . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98 Footnotes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98 Setting text preferences . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99

User Interfaces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100

Dialog overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 Your first InDesign dialog . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101 Adding a user interface to Hello World . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102 Creating a more complex user interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102 Working with ScriptUI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105 Creating a progress bar with ScriptUI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105

Events . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
Understanding the event-scripting model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107 About event properties and event propagation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109 Working with eventListeners . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110 An example afterNew eventListener . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112 Sample beforePrint eventListener . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114

Menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116
Understanding the menu model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116 Localization and menu names . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118 Running a menu action from a script . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119 Adding menus and menu items . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119 Menus and events . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120 Working with scriptMenuActions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121 A more complex menu-scripting example . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122

Contents

XML . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128 The best approach to scripting XML in InDesign? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128 Scripting XML elements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129 Setting XML preferences . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129 Setting XML import preferences . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129 Importing XML . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130 Creating an XML tag . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130 Loading XML tags . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131 Saving XML tags . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131 Creating an XML element . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131 Moving an XML element . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131 Deleting an XML element . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131 Duplicating an XML element . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132 Removing items from the XML structure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132 Creating an XML comment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132 Creating an XML processing instruction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132 Working with XML attributes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133 Working with XML stories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133 Exporting XML . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134 Adding XML elements to a layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134 Associating XML elements with page items and text . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134 Marking up existing layouts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136 Applying styles to XML elements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 138 Working with XML tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 139

XML Rules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141

Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141 Why use XML rules? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 142 XML-rules programming model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 142 XML rules examples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148 Setting up a sample document . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148 Getting started with XML rules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 149 Changing the XML structure using XML rules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 153 Duplicating XML elements with XML rules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 154 XML rules and XML attributes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 155 Applying multiple matching rules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 157 Finding XML elements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 158 Extracting XML elements with XML rules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 161 Applying formatting with XML rules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 162 Creating page items with XML rules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 165 Creating tables using XML rules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166 Scripting the XML-rules processor object . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167

Introduction
This document shows how to do the following:

Work with the Adobe InDesign scripting environment. Use advanced scripting features. Perform basic document tasks like setting up master spreads, printing, and exporting. Work with page items (rectangles, ellipses, graphic lines, polygons, text frames, and groups). Work with text and type in an InDesign document, including finding and changing text. Create dialog boxes and other user-interface items. Customize and add menus and create menu actions. Respond to user-interface events. Work with XML, from creating XML elements and importing XML to adding XML elements to a layout. Apply XML rules, a new scripting feature that makes working with XML in InDesign faster and easier.

We assume that you have already read the Adobe InDesign CS4 Scripting Tutorial and know how to create, install, and run scripts. If you need to know how to connect with your scripting environment or view the InDesign scripting object model from your script editor, that information can be found in the Adobe InDesign CS4 Scripting Tutorial.

How to Use the Scripts in This Document

For the most part, the scripts shown in this document are not complete scripts. They are only fragments of scripts, and are intended to show only the specific part of a script relevant to the point being discussed in the text. You can copy the script lines shown in this document and paste them into your script editor, but you should not expect them to run without further editing. Note, in addition, that scripts copied out of this document may contain line breaks and other characters (due to the document layout) that will prevent them from executing properly. A zip archive of all of the scripts shown in this document is available at the InDesign scripting home page, at: http://www.adobe.com/products/indesign/scripting/index.html. After you have downloaded and expanded the archive, move the folders corresponding to the scripting language(s) of your choice into the Scripts Panel folder inside the Scripts folder in your InDesign folder. At that point, you can run the scripts from the Scripts panel inside InDesign.

About the structure of the scripts

The script examples are all written using a common template that includes the functions main, mySetup, mySnippet, and myTeardown. We did this to simplify automated testing and publication there is no reason for you to construct your scripts this way. Most of the time, the part of the script you will be interested in will be inside the mySnippet function.

CHAPTER 1: Introduction

For More Information

For more information on InDesign scripting, you also can visit the InDesign Scripting User to User forum, at http://www.adobeforums.com. In the forum, scripters can ask questions, post answers, and share their newest scripts. The forum contains hundreds of sample scripts.

Scripting Features
This chapter covers scripting techniques related to InDesigns scripting environment. Almost every other object in the InDesign scripting model controls a feature that can change a document or the application defaults. By contrast, the features in this chapter control how scripts operate. This document discusses the following:

The scriptPreferences object and its properties. Getting a reference to the executing script. Running scripts in prior versions of the scripting object model. Using the doScript method to run scripts. Working with script labels. Running scripts at InDesign start-up. Controlling the ExtendScript engine in which scripts execute.

We assume you already read Adobe InDesign CS4 Scripting Tutorial and know how to write, install, and run InDesign scripts in the scripting language of your choice.

Script preferences
The scriptPreferences object provides objects and properties related to the way InDesign runs scripts. The following table provides more detail on each property of the scriptPreferences object: Property
enableRedraw scriptsFolder scriptsList

Description Turns screen redraw on or off while a script is running from the Scripts panel. The path to the scripts folder. A list of the available scripts. This property is an array of arrays, in the following form:
[[fileName, filePath], ...]

Where fileName is the name of the script file and filePath is the full path to the script. You can use this feature to check for the existence of a script in the installed set of scripts.

CHAPTER 2: Scripting Features

Getting the current script

Property
userInteractionLevel

Description This property controls the alerts and dialogs InDesign presents to the user. When you set this property to UserInteractionLevels.neverInteract, InDesign does not display any alerts or dialogs. Set it to UserInteractionLevels.interactWithAlerts to enable alerts but disable dialogs. Set it to interactWithAll to restore the normal display of alerts and dialogs. The ability to turn off alert displays is very useful when you are opening documents via script; often, InDesign displays an alert for missing fonts or linked graphics files. To avoid this alert, set the user-interaction level to UserInteractionLevels.neverInteract before opening the document, then restore user interaction (set the property to interactWithAll) before completing script execution. The version of the scripting environment in use. For more information, see Script versioning on page 11. Note this property is not the same as the version of the application.

version

Getting the current script

You can get a reference to the current script using the activeScript property of the application object. You can use this property to help you locate files and folders relative to the script, as shown in the following example (from the ActiveScript tutorial script):
var myScript = app.activeScript; alert("The current script is: " + myScript); var myParentFolder = File(myScript).parent; alert("The folder containing the active script is: " + myParentFolder);

When you debug scripts using a script editor, the activeScript property returns an error. Only scripts run from the Scripts palette appear in the activeScript property. When you debug scripts from the ExtendScript Toolkit, using the activeScript property returns an error. To avoid this error and create a way of debugging scripts that use the activeScript property, use the following error handler (from the GetScriptPath tutorial script):
function myGetScriptPath() { try{ return app.activeScript; } catch(myError){ return File(myError.fileName); } }

CHAPTER 2: Scripting Features

Script versioning

Script versioning
InDesign CS4 can run scripts using earlier versions of the InDesign scripting object model. To run an older script in a newer version of InDesign, you must consider the following:

Targeting Scripts must be targeted to the version of the application in which they are being run (i.e., the current version). The mechanics of targeting are language specific. Compilation This involves mapping the names in the script to the underlying script ids, which are what the application understands. The mechanics of compilation are language specific. Interpretation This involves matching the ids to the appropriate request handler within the application. InDesign CS4 correctly interprets a script written for an earlier version of the scripting object model. To do this, run the script from a folder in the Scripts panel folder named Version 5.0 Scripts (for InDesign CS3 scripts) or Version 2.0 Scripts (for InDesign CS2 scripts), or explicitly set the application's script preferences to the old object model within the script (as shown below). Put the previous version scripts in the folder, and run them from the Scripts panel.

Targeting
Targeting for JavaScripts is implicit when the script is launched from the Scripts panel. If the script is launched externally (from the ESTK), use the target directive:
//target CS4 #target "InDesign-6.0" //target the latest version of InDesign #target "InDesign"

Compilation
JavaScripts are not pre-compiled. For compilation, the application uses the same version of the DOM that is set for interpretation.

Interpretation
The InDesign application object contains a scriptPreferences object, which allows a script to get/set the version of the scripting object model to use for interpreting scripts. The version defaults to the current version of the application and persists. The following examples show how to set the version to the CS3 (5.0) version of the scripting object model.
//Set to 5.0 scripting object model app.scriptPreferences.version = 5.0;

Using the doScript method

The doScript method gives a script a way to execute another script. The script can be a string of valid scripting code or a file on disk. The script can be in the same scripting language as the current script or another scripting language. The available languages vary by platform: on Mac OS, you can run AppleScript or JavaScript; on Windows, VBScript or JavaScript.

CHAPTER 2: Scripting Features

Using the doScript method

The doScript method has many possible uses:

Running a script in another language that provides a feature missing in your main scripting language. For example, VBScript lacks the ability to display a file or folder browser, which JavaScript has. AppleScript can be very slow to compute trigonometric functions (sine and cosine), but JavaScript performs these calculations rapidly. JavaScript does not have a way to query Microsoft Excel for the contents of a specific spreadsheet cell, but both AppleScript and VBScript have this capability. In all these examples, the doScript method can execute a snippet of scripting code in another language, to overcome a limitation of the language used for the body of the script. Creating a script on the fly. Your script can create a script (as a string) during its execution, which it can then execute using the doScript method. This is a great way to create a custom dialog or panel based on the contents of the selection or the attributes of objects the script creates. Embedding scripts in objects. Scripts can use the doScript method to run scripts that were saved as strings in the label property of objects. Using this technique, an object can contain a script that controls its layout properties or updates its content according to certain parameters. Scripts also can be embedded in XML elements as an attribute of the element or as the contents of an element. See Running scripts at start-up on page 15.

Sending parameters to doScript

To send a parameter to a script executed by doScript, use the following form (from the DoScriptParameters tutorial script):
var myParameters = ["Hello from DoScript", "Your message here."]; var myJavaScript = "alert(\"First argument: \" + arguments[0] + \"\\rSecond argument: \" + arguments[1]);"; app.doScript(myJavaScript, ScriptLanguage.javascript, myParameters); if(File.fs == "Windows"){ var myVBScript = "msgbox arguments(1), vbOKOnly, \"First argument: \" & arguments(0)"; app.doScript(myVBScript, ScriptLanguage.visualBasic, myParameters); } else{ var myAppleScript = "tell application \"Adobe InDesign CS4\\rdisplay dialog(\"First argument\" & item 1 of arguments & return & \"Second argument: \" & item 2 of arguments & return & end tell"; app.doScript(myAppleScript, ScriptLanguage.applescriptLanguage, myParameters); }

Returning values from doScript

The following script fragment shows how to return a value from a script executed by doScript. This example uses a JavaScript that is executed as a string, but the same method works for script files. This example returns a single value, but you can return multiple values by returning an array (for the complete script, refer to the DoScriptReturnValues script).

CHAPTER 2: Scripting Features

Using the doScript method

//To send parameters to a script run using app.doScript(), the doScript //statement must not appear inside a function. If it does, the parameters //will not be passed to the script. var myDocument = app.documents.add(); var myPage = myDocument.pages.item(0); var myTextFrame = myPage.textFrames.add(); myTextFrame.geometricBounds = ["72pt", "72pt", "288pt", "288pt"]; myTextFramecContents = "Example text frame."; var myDestinationPage = myDocument.pages.add(LocationOptions.after, myPage); var myPageIndex = myDestinationPage.name; var myID = myTextFrame.id; var myJavaScript = "var myDestinationPage = arguments[1];\r" ; myJavaScript += "myID = arguments[0];\r"; myJavaScript += "var myX = arguments[2];\r"; myJavaScript += "var myY = arguments[3]\r;" myJavaScript += "var myPageItem = app.documents.item(0).pages.item(0).pageItems.itemByID(myID);\r"; myJavaScript += "myPageItem.duplicate(app.documents.item(0).pages.item(myDestinationPage));\r" //Create an array for the parameters we want to pass to the JavaScript. var myArguments = [myID, myPageIndex, 0, 0]; var myDuplicate = app.doScript(myJavaScript, ScriptLanguage.javascript, myArguments); //myDuplicate now contains a reference to the duplicated text frame. //Change the text in the duplicated text frame. myDuplicate.contents = "Duplicated text frame.";

Another way to get values from another script is to use the scriptArgs (short for script arguments) object of the application. The following script fragment shows how to do this (for the complete script, see DoScriptScriptArgs):
var myJavaScript = "app.scriptArgs.setValue(\"ScriptArgumentA\", \"This is the first script argument value.\");\r"; myJavaScript += "app.scriptArgs.setValue(\"ScriptArgumentB\", \"This is the second script argument value.\")"; var myScriptArgumentA = app.scriptArgs.getValue("ScriptArgumentA"); var myScriptArgumentB = app.scriptArgs.getValue("ScriptArgumentB"); alert("ScriptArgumentA: " + myScriptArgumentA + "\rScriptArgumentB: " + myScriptArgumentB); if(File.fs == "Windows"){ var myVBScript = "Set myInDesign = CreateObject(\"InDesign.Application.CS4\")\r"; myVBScript += "myInDesign.ScriptArgs.SetValue \"ScriptArgumentA\", \"This is the first script argument value.\"\r"; myVBScript += "myInDesign.ScriptArgs.SetValue \"ScriptArgumentB\", \"This is the second script argument value.\""; app.doScript(myVBScript, ScriptLanguage.visualBasic); } else{ var myAppleScript = "tell application \"Adobe InDesign CS4\"\r"; myAppleScript += "make script arg with properties{name:\"ScriptArgumentA\", value:\"This is the first script argument value.\"}\r"; myAppleScript += "make script arg with properties{name:\"ScriptArgumentB\", value:\"This is the second script argument value.\"}\r"; myAppleScript += "end tell\r"; app.doScript(myAppleScript, ScriptLanguage.applescriptLanguage); } var myScriptArgumentA = app.scriptArgs.getValue("ScriptArgumentA"); var myScriptArgumentB = app.scriptArgs.getValue("ScriptArgumentB"); alert("ScriptArgumentA: " + myScriptArgumentA + "\rScriptArgumentB: " + myScriptArgumentB);

CHAPTER 2: Scripting Features

Controlling Undo with doScript

InDesign gives you the ability to undo almost every action, but this comes at a price: for almost every action you make, InDesign writes to disk. For normal work you using the tools presented by the user interface, this does not present any problem. For scripts, which can perform thousands of actions in the time a human being can blink, the constant disk access can be a serious drag on performance. The doScript method offers a way around this performance bottleneck by providing two parameters that control the way that scripts are executed relative to InDesigns Undo behavior. These parameters are shown in the following examples:
//Given a script "myJavaScript" and an array of parameters "myParameters"... app.doScript(myJavaScript, ScriptLanguage.javascript, myParameters, UndoModes.fastEntireScript, "Script Action"); //UndoModes can be: //UndoModes.autoUnto: Add no events to the Undo queue. //UndoModes.entireScript: Put a single event in the Undo queue. //UndoModes.fastEntireScript: Put a single event in the Undo queue. //UndoModes.scriptRequest: Undo each script action as a separate event. //The last parameter is the text that appears in the Undo menu item.

Working with script labels

Many objects in InDesign scripting have a label property, including page items (rectangles, ovals, groups, polygons, text frames, and graphic lines), table cells, documents, stories, and pages. This property can store a very large amount of text. The label of page items can be viewed, entered, or edited using the Script Label panel (choose Window > Automation > Script Label to display this panel), shown below. You also can add a label to an object using scripting, and you can read the script label via scripting. For many objects, like stories, pages, and paragraph styles, you cannot set or view the label using the Script Label panel.

The label property can contain any form of text data, such as tab- or comma-delimited text, HTML, or XML. Because scripts also are text, they can be stored in the label property. Page items can be referred to by their label, just like named items (such as paragraph styles, colors, or layers) can be referred to by their name. The following script fragment demonstrates this special case of the label property (for the complete script, see ScriptLabel):

CHAPTER 2: Scripting Features

Running scripts at start-up

In addition, all objects that support the label property also support custom labels. A script can set a custom label using the insertLabel method, and extract the custom label using the extractLabel method, as shown in the following script fragment (from the CustomLabel tutorial script):
var myDocument = app.documents.add(); myDocument.viewPreferences.horizontalMeasurementUnits = MeasurementUnits.points; myDocument.viewPreferences.verticalMeasurementUnits = MeasurementUnits.points; var myPage = myDocument.pages.item(0); var myRectangle = myPage.rectangles.add({geometricBounds:[72, 72, 144, 144]}); //Insert a custom label using insertLabel. The first parameter is the //name of the label, the second is the text to add to the label. myRectangle.insertLabel("CustomLabel", "This is some text stored in a custom label."); //Extract the text from the label and display it in an alert. var myString = myRectangle.extractLabel("CustomLabel"); alert("Custom label contained: " + myString);

Running scripts at start-up

To run a script when InDesign starts, put the script in the Startup Scripts folder in the Scripts folder (for more information, see Installing Scripts in Adobe InDesign CS4 Scripting Tutorial). NOTE: Scripts run in the session ExtendScript engine when InDesign starts can create objects and functions that will be available to other scripts for the duration of the session. For more information, see Session and main script execution on page 16.

CHAPTER 2: Scripting Features

Session and main script execution

InDesign has two ways to run a JavaScript, session and main. These names correspond to the ExtendScript engine used to run the script. By default, when you run an InDesign JavaScript, the script is interpreted and executed by the main ExtendScript engine, which is destroyed when the script completes execution. Script objects created by the script do not persist. Scripts run in the session engine can create objects that persist until you close InDesign. You can refer to these objects from other scripts run in the session engine. To set the session engine as the target of an InDesign JavaScript, add the following line to the start of your script.
#targetengine "session"

You can create your own persistent ExtendScript interpretation and execution environment. To do this, use the #targetenging statement and provide your own ExtendScript engine name, as shown in the following script fragment:
#targetengine "adobe"

Documents
The work you do in InDesign revolves around documentscreating them, saving them, printing or exporting them, and populating them with page items, colors, styles, and text. Almost every document-related task can be automated using InDesign scripting. This chapter shows you how to do the following

Perform basic document-management tasks, including:

Creating a new document. Opening a document. Saving a document. Closing a document.

Perform basic page-layout operations, including:

Setting the page size and document length. Defining bleed and slug areas. Specifying page columns and margins.

Change the appearance of the pasteboard. Use guides and grids. Change measurement units and ruler origin. Define and apply document presets. Set up master pages (master spreads) Set text-formatting defaults. Add XMP metadata (information about a file). Create a document template. Print a document. Export a document as Adobe PDF. Export pages of a document as EPS.

We assume you already read Adobe InDesign CS4 Scripting Tutorial and know how to create, install, and run a script.

CHAPTER 3: Documents

Basic document operations

Opening, closing, and saving documents are some of the most basic document tasks. This section shows how to do them using scripting.

Creating a new document

The following script shows how to make a new document using scripting (for the complete script, see MakeDocument):
var myDocument = app.documents.add();

To create a document using a document preset, the add method includes an optional parameter you can use to specify a document preset, as shown in the following script (for the complete script, see MakeDocumentWithPreset):
//Creates a new document using the specified document preset. //Replace "myDocumentPreset" in the following line with the name //of the document preset you want to use. var myDocument = app.documents.add(true, app.documentPresets.item("myDocumentPreset"));

You can create a document without displaying it in a window, as shown in the following script fragment (from the MakeDocumentWithParameters tutorial script):
//Creates a new document without showing the document window. //The first parameter (showingWindow) controls the visibility of the //document. Hidden documents are not minimized, and will not appear until //you add a new window to the document. var myDocument = app.documents.add(false); //To show the window: var myWindow = myDocument.windows.add();

Some script operations are much faster when the document window is hidden.

Opening a document
The following script shows how to open an existing document (for the complete script, see OpenDocument):
app.open(File("/c/myTestDocument.indd"));

You can choose to prevent the document from displaying (i.e., hide it) by setting the showing window parameter of the open method to false (the default is true). You might want to do this to improve performance of a script. To show a hidden document, create a new window, as shown in the following script fragment (from the OpenDocumentInBackground tutorial script):
//Opens an existing document in the background, then shows the document. //You'll have to fill in your own file path. var myDocument = app.open(File("/c/myTestDocument.indd"), false); //At this point, you could do things with the document without showing the //document window. In some cases, scripts will run faster when the document //window is not visible. //When you want to show the hidden document, create a new window. var myLayoutWindow = myDocument.windows.add();

CHAPTER 3: Documents

Basic document operations

Saving a document
In the InDesign user interface, you save a file by choosing File > Save, and you save a file to another file name by choosing File > Save As. In InDesign scripting, the save method can do either operation, as shown in the following script fragment (from the SaveDocument tutorial script):
//If the active document has been changed since it was last saved, save it. if(app.activeDocument.modified == true){ app.activeDocument.save(); }

The save method has two optional parameters: The first (to) specifies the file to save to; the second (stationery) can be set to true to save the document as a template, as shown in the following script fragment (from the SaveDocumentAs tutorial script):
//If the active document has not been saved (ever), save it. if(app.activeDocument.saved == false){ //If you do not provide a file name, InDesign displays the Save dialog box. app.activeDocument.save(new File("/c/myTestDocument.indd")); }

You can save a document as a template, as shown in the following script fragment (from the SaveAsTemplate tutorial script):
//Save the active document as a template. var myFileName; if(app.activeDocument.saved == true){ //Convert the file name to a string. myFileName = app.activeDocument.fullName + ""; //If the file name contains the extension ".indd", change it to ".indt". if(myFileName.indexOf(".indd")!=-1){ var myRegularExpression = /.indd/gi myFileName = myFileName.replace(myRegularExpression, ".indt"); } } //If the document has not been saved, then give it a default file name/file path. else{ myFileName = "/c/myTestDocument.indt"; } app.activeDocument.save(File(myFileName), true);

Closing a document
The close method closes a document, as shown in the following script fragment (from the CloseDocument tutorial script):
app.activeDocument.close(); //Note that you could also use: //app.documents.item(0).close();

The close method can take up to two optional parameters, as shown in the following script fragment (from the CloseWithParameters tutorial script):

CHAPTER 3: Documents

Basic page layout 20

//Use SaveOptions.yes to save the document,SaveOptions.no to close the //document without saving, or SaveOptions.ask to display a prompt. If //you use SaveOptions.yes, you'll need to provide a reference to a file //to save to in the second parameter (SavingIn). //Note that the file path is provided using the JavaScript URI form //rather than the platform-specific form. // //If the file has not been saved, display a prompt. if(app.activeDocument.saved != true){ app.activeDocument.close(SaveOptions.ask); //Or, to save to a specific file name: //var myFile = File("/c/myTestDocument.indd"); //app.activeDocument.close(SaveOptions.yes, myFile); } else{ //If the file has already been saved, save it. app.activeDocument.close(SaveOptions.yes); }

You can close all open documents without saving them, as shown in the following script fragment (from the CloseAll tutorial script):
for(myCounter = app.documents.length; myCounter > 0; myCounter--){ app.documents.item(myCounter-1).close(SaveOptions.no); }

Basic page layout

Each document has a page size, assigned number of pages, bleed and slug working areas, and columns and margins to define the area into which material is placed. Again, all these parameters are accessible to scripting, as shown in the examples in this section.

Defining page size and document length

When you create a new document using the InDesign user interface, you can specify the page size, number of pages, page orientation, and whether the document uses facing pages. To create a document using InDesign scripting, use the documents.add method, which does not specify these settings. After creating a document, you can use the documentPreferences object to control the settings, as shown in the following script fragment (from the DocumentPreferences tutorial script):
var myDocument = app.documents.add(); with(myDocument.documentPreferences){ pageHeight = "800pt"; pageWidth = "600pt"; pageOrientation = PageOrientation.landscape; pagesPerDocument = 16; }

NOTE: The app object also has a documentPreferences object. You can set the application defaults for page height, page width, and other properties by changing the properties of this object.

Defining bleed and slug areas

Within InDesign, a bleed or a slug is an area outside the page margins that can be printed or included in an exported PDF. Typically, these areas are used for objects that extend beyond the page edges (bleed) and

CHAPTER 3: Documents

Basic page layout 21

job/document information (slug). The two areas can be printed and exported independently; for example, you might want to omit slug information for the final printing of a document. The following script shows how to set up the bleed and slug for a new document (for the complete script, see BleedAndSlug):
myDocument = app.documents.add(); //The bleed and slug properties belong to the documentPreferences object. with(myDocument.documentPreferences){ //Bleed documentBleedBottomOffset = "3p"; documentBleedTopOffset = "3p"; documentBleedInsideOrLeftOffset = "3p"; documentBleedOutsideOrRightOffset = "3p"; //Slug slugBottomOffset = "18p"; slugTopOffset = "3p"; slugInsideOrLeftOffset = "3p"; slugRightOrOutsideOffset = "3p"; }

Alternately, if all the bleed distances are equal, as in the preceding example, you can use the documentBleedUniformSize property, as shown in the following script fragment (from the UniformBleed tutorial script):
//Create a new document. myDocument = app.documents.add(); //The bleed properties belong to the documentPreferences object. with(myDocument.documentPreferences){ //Bleed documentBleedUniformSize = true; documentBleedTopOffset = "3p"; }

If all the slug distances are equal, you can use the documentSlugUniformSize property, as shown in the following script fragment (from the UniformSlug tutorial script):
//Create a new document. myDocument = app.documents.add(); //The slug properties belong to the documentPreferences object. with(myDocument.documentPreferences){ //Slug: documentSlugUniformSize = true; slugTopOffset = "3p"; }

In addition to setting the bleed and slug widths and heights, you can control the color used to draw the guides defining the bleed and slug. This property is not in the documentPreferences object; instead, it is in the pasteboardPreferences object, as shown in the following script fragment (from the BleedSlugGuideColors tutorial script):
with(app.activeDocument.pasteboardPreferences){ //Any of InDesign's guides can use the UIColors constants... bleedGuideColor = UIColors.cuteTeal; slugGuideColor = UIColors.charcoal; //...or you can specify an array of RGB values (with values from 0 to 255) //bleedGuideColor = [0, 198, 192]; //slugGuideColor = [192, 192, 192]; }

CHAPTER 3: Documents

Basic page layout 22

Setting page margins and columns

Each page in a document can have its own margin and column settings. With InDesign scripting, these properties are part of the marginPreferences object for each page. This following sample script creates a new document, then sets the margins and columns for all pages in the master spread. (For the complete script, see PageMargins.)
myDocument = app.documents.add(); with (myDocument.pages.item(0).marginPreferences){ columnCount = 3; //columnGutter can be a number or a measurement string. columnGutter = "1p"; bottom = "6p" //When document.documentPreferences.facingPages == true, //"left" means inside; "right" means outside. left = "6p" right = "4p" top = "4p" }

To set the page margins for an individual page, use the margin preferences for that page, as shown in the following script fragment (from the PageMarginsForOnePage tutorial script):
myDocument = app.documents.add(); with (myDocument.pages.item(0).marginPreferences){ columnCount = 3; //columnGutter can be a number or a measurement string. columnGutter = "1p"; bottom = "6p" //When document.documentPreferences.facingPages == true, //"left" means inside; "right" means outside. left = "6p" right = "4p" top = "4p" }

InDesign does not allow you to create a page that is smaller than the sum of the relevant margins; that is, the width of the page must be greater than the sum of the left and right page margins, and the height of the page must be greater than the sum of the top and bottom margins. If you are creating very small pages (for example, for individual newspaper advertisements) using the InDesign user interface, you can easily set the correct margin sizes as you create the document, by entering new values in the document default page Margin fields in the New Document dialog box. From scripting, however, the solution is not as clear: when you create a document, it uses the applications default-margin preferences. These margins are applied to all pages of the document, including master pages. Setting the document margin preferences affects only new pages and has no effect on existing pages. If you try to set the page height and page width to values smaller than the sum of the corresponding margins on any existing pages, InDesign does not change the page size. There are two solutions. The first is to set the margins of the existing pages before you try to change the page size, as shown in the following script fragment (from the PageMarginsForSmallPages tutorial script):

CHAPTER 3: Documents

Basic page layout 23

var myDocument = app.documents.add(); myDocument.marginPreferences.top = 0; myDocument.marginPreferences.left = 0; myDocument.marginPreferences.bottom = 0; myDocument.marginPreferences.right = 0; //The following assumes that your default document contains a single page. myDocument.pages.item(0).marginPreferences.top = 0; myDocument.pages.item(0).marginPreferences.left = 0; myDocument.pages.item(0).marginPreferences.bottom = 0; myDocument.pages.item(0).marginPreferences.right = 0; //The following assumes that your default master spread contains two pages. myDocument.masterSpreads.item(0).pages.item(0).marginPreferences.top = 0; myDocument.masterSpreads.item(0).pages.item(0).marginPreferences.left = 0; myDocument.masterSpreads.item(0).pages.item(0).marginPreferences.bottom = 0; myDocument.masterSpreads.item(0).pages.item(0).marginPreferences.right = 0; myDocument.masterSpreads.item(0).pages.item(1).marginPreferences.top = 0; myDocument.masterSpreads.item(0).pages.item(1).marginPreferences.left = 0; myDocument.masterSpreads.item(0).pages.item(1).marginPreferences.bottom = 0; myDocument.masterSpreads.item(0).pages.item(1).marginPreferences.right = 0; myDocument.documentPreferences.pageHeight = "1p"; myDocument.documentPreferences.pageWidth = "6p";

Alternately, you can change the applications default-margin preferences before you create the document, as shown in the following script fragment (from the ApplicationPageMargins tutorial script):
with (app.marginPreferences){ //Save the current application default margin preferences. var myY1 = top; var myX1 = left; var myY2 = bottom; var myX2 = right; //Set the application default margin preferences. top = 0; left = 0; bottom = 0; right = 0; } //Create a new example document to demonstrate the change. var myDocument = app.documents.add(); myDocument.documentPreferences.pageHeight = "1p"; myDocument.documentPreferences.pageWidth = "6p"; //Reset the application default margin preferences to their former state. with (app.marginPreferences){ top = myY1; left = myX1 ; bottom = myY2; right = myX2; }

Changing the appearance of the pasteboard

The pasteboard is the area that surrounds InDesign pages and spreads. You can use it for temporary storage of page items or for job-tracking information. You can change the size of the pasteboard and its color using scripting. The previewBackgroundColor property sets the color of the pasteboard in Preview mode, as shown in the following script fragment (from the PasteboardPreferences tutorial script):

CHAPTER 3: Documents

Basic page layout 24

myDocument = app.documents.add(); with(myDocument.pasteboardPreferences){ //You can use either a number or a measurement string //to set the space above/below. minimumSpaceAboveAndBelow = "12p"; //You can set the preview background color to any of //the predefined UIColor enumerations... previewBackgroundColor = UIColors.gray; //...or you can specify an array of RGB values //(with values from 0 to 255) //previewBackgroundColor = [192, 192, 192]; }

Guides and grids

Guides and grids make it easy to position objects on your document pages. These are very useful items to add when you are creating templates for others to use.

Defining guides
Guides in InDesign give you an easy way to position objects on the pages of your document. The following script fragment shows how to use guides (for the complete script, see Guides):
var myDocument = app.documents.add(); var myPageWidth = myDocument.documentPreferences.pageWidth; var myPageHeight = myDocument.documentPreferences.pageHeight; with(myDocument.pages.item(0)){ //Place guides at the margins of the page. guides.add(undefined, {orientation:HorizontalOrVertical.vertical, <lb> location:marginPreferences.left}); guides.add(undefined, {orientation:HorizontalOrVertical.vertical, <lb> location:(myPageWidth - marginPreferences.right)}); guides.add(undefined, {orientation:HorizontalOrVertical.horizontal, <lb> location:marginPreferences.top}); guides.add(undefined, {orientation:HorizontalOrVertical.horizontal, <lb> location:(myPageHeight - marginPreferences.bottom)}); //Place a guide at the vertical center of the page. guides.add(undefined, {orientation:HorizontalOrVertical.vertical, <lb> location:(myPageWidth/2)}); //Place a guide at the horizontal center of the page. guides.add(undefined, {orientation:HorizontalOrVertical.horizontal, <lb> location:(myPageHeight/2)}); }

Horizontal guides can be limited to a given page or extend across all pages in a spread. From InDesign scripting, you can control this using the fitToPage property. This property is ignored by vertical guides. You can use scripting to change the layer, color, and visibility of guides, just as you can from the user interface, as shown in the following script fragment (from the GuideOptions tutorial script):

CHAPTER 3: Documents

Basic page layout 25

You also can create guides using the createGuides method on spreads and master spreads, as shown in the following script fragment (from the CreateGuides tutorial script):
var myDocument = app.documents.add(); with (myDocument.spreads.item(0)){ //Parameters (all optional): row count, column count, row gutter, //column gutter,guide color, fit margins, remove existing, layer. //Note that the createGuides method does not take an RGB array //for the guide color parameter. createGuides(4, 4, "1p", "1p", UIColors.gray, true, true, myDocument.layers.item(0)); }

Setting grid preferences

To control the properties of the document and baseline grid, you set the properties of the gridPreferences object, as shown in the following script fragment (from the DocumentAndBaselineGrid tutorial script):
var myDocument = app.documents.add(); //Set the document measurement units to points. myDocument.viewPreferences.horizontalMeasurementUnits = MeasurementUnits.points; myDocument.viewPreferences.verticalMeasurementUnits = MeasurementUnits.points; //Set up grid preferences. with(myDocument.gridPreferences){ baselineStart = 56; baselineDivision = 14; baselineShown = true; horizontalGridlineDivision = 14; horizontalGridSubdivision = 5 verticalGridlineDivision = 14; verticalGridSubdivision = 5 documentGridShown = true; }

CHAPTER 3: Documents

Basic page layout 26

Snapping to guides and grids

All snap settings for a documents grids and guides are in the properties of the guidePreferences and gridPreferences objects. The following script fragment shows how to set guide and grid snap properties (for the complete script, see GuideGridPreferences):
var myDocument = app.activeDocument; with(myDocument.guidePreferences){ guidesInBack = true; guidesLocked = false; guidesShown = true; guidesSnapTo = true; } with(myDocument.gridPreferences){ documentGridShown = false; documentGridSnapTo = true; //Objects "snap" to the baseline grid when //guidePreferences.guideSnapTo is set to true. baselineGridShown = true; }

Changing measurement units and ruler

Thus far, the sample scripts used measurement strings, strings that force InDesign to use a specific measurement unit (for example, 8.5i for 8.5 inches). They do this because you might be using a different measurement system when you run the script. To specify the measurement system used in a script, use the documents viewPreferences object., as shown in the following script fragment (from the ViewPreferences tutorial script):
var myDocument = app.activeDocument; with(myDocument.viewPreferences){ //Measurement unit choices are: //* MeasurementUnits.agates //* MeasurementUnits.picas //* MeasurementUnits.points //* MeasurementUnits.inches //* MeasurementUnits.inchesDecimal //* MeasurementUnits.millimeters //* MeasurementUnits.centimeters //* MeasurementUnits.ciceros //Set horizontal and vertical measurement units to points. horizontalMeasurementUnits = MeasurementUnits.points; verticalMeasurementUnits = MeasurementUnits.points; }

If you are writing a script that needs to use a specific measurement system, you can change the measurement units at the beginning of the script, then restore the original measurement units at the end of the script. This is shown in the following script fragment (from the ResetMeasurementUnits tutorial script):

CHAPTER 3: Documents

Basic page layout 27

Defining and applying document presets

Basic page layout 31

Adding XMP metadata

Metadata is information that describes the content, origin, or other attributes of a file. In the InDesign user interface, you enter, edit, and view metadata using the File Info dialog (choose File > File Info). This metadata includes the documents creation and modification dates, author, copyright status, and other information. All this information is stored using XMP (Adobe Extensible Metadata Platform), an open standard for embedding metadata in a document. To learn more about XMP, see the XMP specification at http://partners.adobe.com/asn/developer/pdf/MetadataFramework.pdf. You also can add XMP information to a document using InDesign scripting. All XMP properties for a document are in the documents metadataPreferences object. The example below fills in the standard XMP data for a document. This example also shows that XMP information is extensible. If you need to attach metadata to a document and the data does not fall into a category provided by the metadata preferences object, you can create your own metadata container (email, in this example). For the complete script, see MetadataExample.
var myDocument = app.documents.add(); with (myDocument.metadataPreferences){ author = "Adobe"; copyrightInfoURL = "http://www.adobe.com"; copyrightNotice = "This document is copyrighted."; copyrightStatus = CopyrightStatus.yes; description = "Example of xmp metadata scripting in InDesign CS"; documentTitle = "XMP Example"; jobName = "XMP_Example_2003"; keywords = ["animal", "mineral", "vegetable"]; //The metadata preferences object also includes the read-only //creator, format, creationDate, modificationDate, and serverURL //properties that are automatically entered and maintained by InDesign. //Create a custom XMP container, "email" var myNewContainer = createContainerItem("http://ns.adobe.com/xap/1.0/", "email"); setProperty("http://ns.adobe.com/xap/1.0/", "email/*[1]", "[email protected]"); }

Creating a document template

This example creates a new document, defines slug and bleed areas, adds information to the documents XMP metadata, sets up master pages, adds page footers, and adds job information to a table in the slug area. For the complete script, see DocumentTemplate.

CHAPTER 3: Documents

Basic page layout 32

//Set the application default margin preferences. with (app.marginPreferences){ //Save the current application default margin preferences. var myY1 = top; var myX1 = left; var myY2 = bottom; var myX2 = right; //Set the application default margin preferences. //Document baseline grid will be based on 14 points, and //all margins are set in increments of 14 points. top = 14 * 4 + "pt"; left = 14 * 4 + "pt"; bottom = "74pt"; right = 14 * 5 + "pt"; } //Make a new document. var myDocument = app.documents.add(); myDocument.documentPreferences.pageWidth = "7i"; myDocument.documentPreferences.pageHeight = "9i"; myDocument.documentPreferences.pageOrientation = PageOrientation.portrait; //At this point, we can reset the application default margins to their original state. with (app.marginPreferences){ top = myY1; left = myX1; bottom = myY2; right = myX2; } //Set up the bleed and slug areas. with(myDocument.documentPreferences){ //Bleed documentBleedBottomOffset = "3p"; documentBleedTopOffset = "3p"; documentBleedInsideOrLeftOffset = "3p"; documentBleedOutsideOrRightOffset = "3p"; //Slug slugBottomOffset = "18p"; slugTopOffset = "3p"; slugInsideOrLeftOffset = "3p"; slugRightOrOutsideOffset = "3p"; } //Create a color. try{ myDocument.colors.item("PageNumberRed").name; } catch (myError){ myDocument.colors.add({name:"PageNumberRed", model:ColorModel.process, colorValue:[20, 100, 80, 10]}); } //Next, set up some default styles. //Create up a character style for the page numbers. try{ myDocument.characterStyles.item("page_number").name; } catch (myError){ myDocument.characterStyles.add({name:"page_number"}); } myDocument.characterStyles.item("page_number").fillColor = myDocument.colors.item("PageNumberRed"); //Create up a pair of paragraph styles for the page footer text. //These styles have only basic formatting.

CHAPTER 3: Documents

Basic page layout 33

try{ myDocument.paragraphStyles.item("footer_left").name; } catch (myError){ myDocument.paragraphStyles.add({name:"footer_left", pointSize:11, leading:14}); } //Create up a pair of paragraph styles for the page footer text. try{ myDocument.paragraphStyles.item("footer_right").name; } catch (myError){ myDocument.paragraphStyles.add({name:"footer_right", basedOn:myDocument.paragraphStyles.item("footer_left"), justification:Justification.rightAlign, pointSize:11, leading:14}); } //Create a layer for guides. try{ myDocument.layers.item("GuideLayer").name; } catch (myError){ myDocument.layers.add({name:"GuideLayer"}); } //Create a layer for the footer items. try{ myDocument.layers.item("Footer").name; } catch (myError){ myDocument.layers.add({name:"Footer"}); } //Create a layer for the slug items. try{ myDocument.layers.item("Slug").name; } catch (myError){ myDocument.layers.add({name:"Slug"}); } //Create a layer for the body text. try{ myDocument.layers.item("BodyText").name; } catch (myError){ myDocument.layers.add({name:"BodyText"}); } with(myDocument.viewPreferences){ rulerOrigin = RulerOrigin.pageOrigin; horizontalMeasurementUnits = MeasurementUnits.points; verticalMeasurementUnits = MeasurementUnits.points; } //Document baseline grid and document grid with(myDocument.gridPreferences){ baselineStart = 56; baselineDivision = 14; baselineShown = false; horizontalGridlineDivision = 14; horizontalGridSubdivision = 5 verticalGridlineDivision = 14; verticalGridSubdivision = 5 documentGridShown = false; }

//-----------------------------------------------------------------------//Properties corresponding to the controls in the //Output panel of the Print dialog box. //-----------------------------------------------------------------------negative = true; colorOutput = ColorOutputModes.separations; //Note the lowercase "i" in "Builtin" trapping = Trapping.applicationBuiltin; screening = "175 lpi/2400 dpi"; flip = Flip.none; //If trapping is on, attempting to set the following //properties will generate an error. if(trapping == Trapping.off){ printBlack = true; printCyan = true; printMagenta = true; printYellow = true; } //Only change the ink angle and frequency when you want to override the //screening set by the screening specified by the screening property. //blackAngle = 45; //blackFrequency = 175; //cyanAngle = 15; //cyanFrequency = 175; //magentaAngle = 75; //magentaFreqency = 175; //yellowAngle = 0; //yellowFrequency = 175; //The following properties are not needed (because //colorOutput is set to separations). //compositeAngle = 45; //compositeFrequency = 175; //simulateOverprint = false; //If trapping is on, setting the following properties will produce an error. if(trapping == Trapping.off){ printBlankPages = false; printGuidesGrids = false; printNonprinting = false; } //-----------------------------------------------------------------------//Properties corresponding to the controls in the //Setup panel of the Print dialog box. //-----------------------------------------------------------------------paperSize = PaperSizes.custom; //Page width and height are ignored if paperSize is not PaperSizes.custom. //paperHeight = 1200; //paperWidth = 1200; printPageOrientation = PrintPageOrientation.portrait; pagePosition = PagePositions.centered; paperGap = 0; paperOffset = 0; paperTransverse = false; scaleHeight = 100; scaleWidth = 100; scaleMode = ScaleModes.scaleWidthHeight; scaleProportional = true;

CHAPTER 3: Documents

Printing a document

//If trapping is on, attempting to set the //following properties will produce an error. if(trapping == Trapping.off){ textAsBlack = false; thumbnails = false; //The following properties is not needed because //thumbnails is set to false. //thumbnailsPerPage = 4; tile = false; //The following properties are not needed because tile is set to false. //tilingOverlap = 12; //tilingType = TilingTypes.auto; } //-----------------------------------------------------------------------//Properties corresponding to the controls in the Marks and Bleed //panel of the Print dialog box. //-----------------------------------------------------------------------//Set the following property to true to print all printer's marks. //allPrinterMarks = true; useDocumentBleedToPrint = false; //If useDocumentBleedToPrint = false then setting //any of the bleed properties //will result in an error. //Get the bleed amounts from the document's bleed and add a bit. bleedBottom = app.activeDocument.documentPreferences. documentBleedBottomOffset+3; bleedTop = app.activeDocument.documentPreferences.documentBleedTopOffset+3; bleedInside = app.activeDocument.documentPreferences. documentBleedInsideOrLeftOffset+3; bleedOutside = app.activeDocument.documentPreferences. documentBleedOutsideOrRightOffset+3; //If any bleed area is greater than zero, then export the bleed marks. if(bleedBottom == 0 && bleedTop == 0 && bleedInside == 0 && bleedOutside == 0){ bleedMarks = true; } else{ bleedMarks = false; } colorBars = true; cropMarks = true; includeSlugToPrint = false; markLineWeight = MarkLineWeight.p125pt markOffset = 6; //markType = MarkTypes.default; pageInformationMarks = true; registrationMarks = true; //-----------------------------------------------------------------------//Properties corresponding to the controls in the //Graphics panel of the Print dialog box. //-----------------------------------------------------------------------sendImageData = ImageDataTypes.allImageData; fontDownloading = FontDownloading.complete; downloadPPDFOnts = true; try{ dataFormat = DataFormat.binary; } catch(e){}

CHAPTER 3: Documents

Exporting a document as PDF

try{ postScriptLevel = PostScriptLevels.level3; } catch(e){} //-----------------------------------------------------------------------//Properties corresponding to the controls in the Color Management //panel of the Print dialog box. //-----------------------------------------------------------------------//If the useColorManagement property of app.colorSettings is false, //attempting to set the following properties will return an error. try{ sourceSpace = SourceSpaces.useDocument; intent = RenderingIntent.useColorSettings; crd = ColorRenderingDictionary.useDocument; profile = Profile.postscriptCMS; } catch(e){} //-----------------------------------------------------------------------//Properties corresponding to the controls in the Advanced //panel of the Print dialog box. //-----------------------------------------------------------------------opiImageReplacement = false; omitBitmaps = false; omitEPS = false; omitPDF = false; //The following line assumes that you have a flattener //preset named "high quality flattener". try{ flattenerPresetName = "high quality flattener"; } catch(e){} ignoreSpreadOverrides = false; }

Printing with printer presets

To print a document using a printer preset, include the printer preset in the print command.

Exporting a document as PDF

InDesign scripting offers full control over the creation of PDF files from your page-layout documents.

Exporting to PDF
The following script exports the current document as PDF, using the current PDF export options (for the complete script, see ExportPDF):
app.activeDocument.exportFile(ExportFormat.pdfType, File("/c/myTestDocument.pdf"), false);

The following script fragment shows how to export to PDF using a PDF export preset (for the complete script, see ExportPDFWithPreset):
var myPDFExportPreset = app.pdfExportPresets.item("prepress"); app.activeDocument.exportFile(ExportFormat.pdfType, File("/c/myTestDocument.pdf"), false, myPDFExportPreset);

CHAPTER 3: Documents

Exporting a document as PDF

Setting PDF export options

Exporting as EPS with file naming

The following script exports each page as an EPS, but it offers more control over file naming than the earlier example. (For the complete script, see ExportEachPageAsEPS.)
//Display a "choose folder" dialog box. if(app.documents.length != 0){ var myFolder = Folder.selectDialog ("Choose a Folder"); if(myFolder != null){ myExportPages(myFolder); } } else{ alert("Please open a document and try again."); } function myExportPages(myFolder){ var myFilePath, myPageName, myFile; var myDocument = app.activeDocument; var myDocumentName = myDocument.name; var myDialog = app.dialogs.add({name:"ExportPages"}); with(myDialog.dialogColumns.add().dialogRows.add()){ staticTexts.add({staticLabel:"Base name:"}); var myBaseNameField = textEditboxes.add({editContents:myDocumentName, minWidth:160}); } var myResult = myDialog.show(); if(myResult == true){ //The name of the exported files will be the base name + //the page name + ".eps". var myBaseName = myBaseNameField.editContents; //Remove the dialog box from memory. myDialog.destroy(); //Generate a file path from the folder name, the base document name, //page name. for(var myCounter = 0; myCounter < myDocument.pages.length;

CHAPTER 3: Documents

Exporting pages as EPS

myCounter++){ myPageName = myDocument.pages.item(myCounter).name; app.epsExportPreferences.pageRange = myPageName; //The name of the exported files will be the base name + //the page name + ".eps". //If the page name contains a colon (as it will if the //document contains sections), //then remove the colon. var myRegExp = new RegExp(":","gi"); myPageName = myPageName.replace(myRegExp, "_"); myFilePath = myFolder + "/" + myBaseName + "_" + myPageName + ".eps"; myFile = new File(myFilePath); app.activeDocument.exportFile(ExportFormat.epsType, myFile, false); } } else{ myDialog.destroy(); } }

Working with Page Items

This chapter covers scripting techniques related to the page items (rectangles, ellipses, graphic lines, polygons, text frames, buttons, and groups) that can appear in an InDesign layout. This document discusses the following:

Creating page items. Page item geometry. Working with paths and path points Creating groups. Duplicating and moving page items. Transforming page items.

Creating Page Items

Page items in an InDesign layout are arranged in a hierarchy, and appear within a container object of some sort. Spreads, pages, other page items, groups, and text characters are all examples of objects that can contain page items. This hierarchy of containers in the InDesign scripting object model is the same as in the InDesign user interface--when you create a rectangle by dragging the Rectangle tool on a page, you are specifying that the page is the container, or parent, of the rectangle. When you paste an ellipse into a polygon, you are specifying that the polygon is the parent of the ellipse, which, in turn, is a child object of its parent, a page. In general, creating a new page item is as simple as telling the object you want to contain the page item to create the page item, as shown in the MakeRectangle script.
//Given a page "myPage", create a new rectangle at the default size and location... var myRectangle = myPage.rectangles.add();

In the above script, a new rectangle is created on the first page of a new document. The rectangle appears at the default location (near the upper left corner of the page) and has a default size (around ten points square). Moving the rectangle and changing its dimensions are both accomplished by filling its geometric bounds property with new values, as shown in the MakeRectangleWithProperties script.
//Given a page "myPage", create a new rectangle and specify its size and location... var myRectangle = myPage.rectangles.add({geometricBounds:[72, 72, 144, 144]});

Page Item Types

It is important to note that you cannot create a generic page item--you have to create a page item of a specific type (a rectangle, oval, graphic line, polygon, text frame, or button). You will also notice that InDesign changes the type of a page item as the geometry of the page item changes. A rectangle, for example, is always made up of a single, closed path containing four path points and having 90 degree interior angles. Change the location of a single point, however, or add another path, and the type of the

CHAPTER 4: Working with Page Items

Creating Page Items

page item changes to a polygon. Open the path and remove two of the four points, and InDesign will change the type to a graphic line. The only things that define the type of a rectangle, ellipse, graphic line, or polygon are:

The number of paths in the object. Any page item with more than one path is a polygon. The number and location of points on the first path in the object.

To determine the type of a page item, use this example:

var myPageItemType = myPageItem.constructor.name;

The result of the above will be a string containing the type of the page item.

Getting the Type of a Page Item

When you have a reference to a generic page item, and want to find out what type of a page item it is, use constructor.name to get the specific type.
//Given a generic page item "myPageItem"... var myType = myPageItem.constructor.name; alert(myType);

Referring to Page Items

When you refer to page items inside a given container (a document, layer, page, spread, group, text frame, or page item), you use the pageItems collection of the container object. This gives you a collection of the top level page items inside the object. For example:
var myPageItems = app.documents.item(0).pages.item(0).pageItems;

The resulting collection (myPageItems) does not include objects inside groups (though it does include the group), objects inside other page items (thought it does contain the parent page item), or page items in text frames. To get a reference to all of the items in a given container, including items nested inside other page items, use the allPageItems property.
var myAllPageItems = app.documents.item(0).pages.item(0).pageItems;

The resulting collection (myAllPageItems) includes all objects on the page, regardless of their position in the hierarchy. Another way to refer to page items is to use their label property, much as you can use the name property of other objects (such as paragraph styles or layers). In the following examples, we will get an array of page items whose label has been set to myLabel.
var myPageItems = app.documents.item(0).pages.item(0).pageItems("myLabel");

If no page items on the page have the specified label, InDesign returns an empty array.

Page Item Geometry

If you are working with page items, it is almost impossible to do anything without understanding the way that rulers and measurements work together to specify the location and shape of an InDesign page item. If you use the Control panel in InDesigns user interface, you probably are already familiar with InDesigns geometry, but here is a quick summary:

CHAPTER 4: Working with Page Items

Creating Page Items

Object are constructed relative to the coordinates shown on the rulers. Changing the zero point location by either dragging the zero point or by changing the ruler origin changes the coordinates on the rulers. Page items are made up of one or more paths, which, in turn, are made up of two or more path points. Paths can be open or closed. Path points contain an anchor point (the location of the point itself ) and two control handles (left direction, which controls the curve of the line segment preceding the point on the path; and right direction, which controls the curve of the segment following the point). Each of these properties contains an array in the form (x, y) (where x is the horizontal location of the point, and y is the vertical location). This array holds the location, in current ruler coordinates, of the point or control handle.

All of the above means that if your scripts need to construct page items, you also need to control the location of the zero point, and you may want to set the measurement units in use.

Working with Paths and Path Points

For most simple page items, you do not need to worry about the paths and path points that define the shape of the object. Rectangles, ellipses, and text frames can be created by specifying their geometric bounds, as we did in the earlier example in this chapter. In some cases, however, you may want to construct or change the shape of a path by specifying path point locations, you can either set the anchor point, left direction, and right direction of each path point on the path individually (as shown in the DrawRegularPolygon_Slow script), or you can use the entirePath property of the path to set all of the path point locations at once (as shown in the DrawRegularPolygon_Fast script). The latter approach is much faster. The items in the array you use for the entirePath property can contain anchor points only, or a anchor points and control handles. Here is an example array containing only anchor point locations:
[[x1, y1], [x2, y2], ...]

Where x and y specify the location of the anchor. Here is an example containing fully-specified path points (i.e., arrays containing the left direction, anchor, and right direction, in that order):
[[xL1, YL1], [x1, y1], [xR1, yR1]], [[xL2, YL2], [x2, y2], [xR2, yR2]], ...]

Where xL and yL specify the left direction, x and y specify the anchor point, and xR and yR specify the right direction. You can also mix the two approaches, as shown in the following example:
[[[xL1, YL1], [x1, y1], [xR1, yR1]], [x2, y2], ...]

Note that the original path does not have to have the same number of points as you specify in the array InDesign will add or subtract points from the path as it applies the array to the entirePath property. The AddPathPoint script shows how to add path points to a path without using the entirePath property.
//Given a graphic line "myGraphicLine"... var myPathPoint = myGraphicLine.paths.item(0).pathPoints.add(); //Move the path point to a specific location. myPathPoint.anchor = [144, 144];

CHAPTER 4: Working with Page Items

Grouping Page Items

The DeletePathPoint script shows how to delete a path point from a path.
//Given a polygon "myPolygon", remove the //last path point in the first path. myPolygon.paths.item(0).pathPoints.item(-1).remove();

Grouping Page Items

In the InDesign user interface, you create groups of page items by selecting them and then choosing Group from the Object menu (or by pressing the corresponding keyboard shortcut). In InDesign scripting, you tell the object containing the page items you want to group (usually a page or spread) to group the page items, as shown in the Group script.
//Given a page "myPage" containing at least two ovals and two rectangles... var myArray = new Array; //Add the items to the array. myArray.push(myPage.rectangles.item(0)); myArray.push(myPage.ovals.item(0)); myArray.push(myPage.rectangles.item(1)); myArray.push(myPage.ovals.item(1)); //Group the items. myPage.groups.add(myArray);

To ungroup, you tell the group itself to ungroup, as shown in the Ungroup script.
//Given a group "myGroup"... myPageItems = myGroup.ungroup();

There is no need to ungroup a group to change the shape, formatting, or content of the page items in the group. Instead, simply get a reference to the page item you want to change, just as you would with any other page item.

Duplicating and Moving Page Items

In the InDesign user interface, you can move page items by selecting them and dragging them to a new location. You can also create copies of page items by copying and pasting, by holding down Option/Alt as you drag an object, or by choosing Duplicate, Paste In Place, or Step and Repeat from the Edit menu. In InDesign scripting, you can use the move method to change the location of page items, and the duplicate method to create a copy of a page item (and, optionally, move it to another location). The move method can take one of two optional parameters: moveTo and moveBy. Both parameters consist of an array of two measurement units, consisting of a horizontal value and a vertical value. moveTo specifies an absolute move to the location specified by the array, relative to the current location of the zero point. moveBy specifies how far to move the page item relative to the current location of the page item itself. The Move script shows the difference between these two approaches.

CHAPTER 4: Working with Page Items

Duplicating and Moving Page Items

//Given a reference to a rectangle "myRectangle"... //Move the rectangle to the location (12, 12). //Absolute move: myRectangle.move([12, 12]); //Move the rectangle *by* 12 points horizontally, 12 points vertically. //Relative move (note undefined first parameter): myRectangle.move(undefined, [12, 12]); //Move the rectangle to another page (rectangle appears at (0,0); var myPage = app.documents.item(0).pages.add(); myRectangle.move(myPage); //To move a page item to another document, use the duplicate method.

Note that the move method truly moves the objectwhen you move a page item to another document, it is deleted from the original document. To move the object to another while retaining the original, use the duplicate method (see below). Use the duplicate method to create a copy of a page item. By default, the duplicate method creates a clone of an object in the same location as the original object. Optional parameters can be used with the duplicate method to move the duplicated object to a new location (including other pages in the same document, or to another document entirely).
//Given a reference to a rectangle "myRectangle"... //Duplicate the rectangle and move the //duplicate to the location (12, 12). //Absolute move: var myDuplicate = myRectangle.duplicate([12, 12]); //Duplicate the rectangle and move the duplicate *by* 12 //points horizontally, 12 points vertically. //Relative move (note undefined first parameter): var myDuplicate = myRectangle.duplicate(undefined, [12, 12]); //Duplicate the rectangle to another page (rectangle appears at (0,0). var myPage = app.documents.item(0).pages.add(); var myDuplicate = myRectangle.duplicate(myPage); //Duplicate the rectangle to another document. var myDocument = app.documents.add(); var myDuplicate = myRectangle.duplicate(myDocument.pages.item(0));

You can also use copy and paste in InDesign scripting, but scripts using on these methods require that you select objects (to copy) and rely on the current view to set the location of the pasted elements (when you paste). This means that scripts that use copy and paste tend to be more fragile (i.e., more likely to fail) than scripts that use duplicate and move. Whenever possible, try to write scripts that do not depend on the current view or selection state.

Creating Compound Paths

InDesign can combine the paths of two or more page items into a single page item containing multiple paths using the Object > Paths > Make Compound Path menu option. You can do this in InDesign scripting using the makeCompoundPath method of a page item, as shown in the following script fragment (for the complete script, refer to the MakeCompoundPath script).
//Given a rectangle "myRectangle" and an Oval "myOval"... myRectangle.makeCompoundPath(myOval);

When you create a compound path, regardless of the types of the objects used to create the compound path, the type of the resulting object is polygon.

CHAPTER 4: Working with Page Items

Duplicating and Moving Page Items

To release a compound path and convert each path in the compound path into a separate page item, use the releaseCompoundPath method of a page item, as shown in the following script fragment (for the complete script, refer to the ReleaseCompoundPath script).
//Given a polygon "myPolygon"... var myPageItems = myPolygon.releaseCompoundPath();

Using Pathfinder Operations

The InDesign Pathfinder features offer ways to work with relationships between page items on an InDesign page. You can merge the paths of page items, or subtract the area of one page item from another page item, or create a new page item from the area of intersection of two or more page items. Every page item supports the following methods related to the Pathfinder features: AddPath, ExcludeOverlapPath, IntersectPath, MinusBack, and SubtractPath. All of the Pathfinder methods work the same way--you provide an array of page items to use as the basis for the operation (just as you select a series of page items before choosing the Pathfinder operation in the user interface). Note that it is very likely that the type of the object will change after you apply one of the Pathfinder operations. Which object type it will change to depends on the number and location of the points in the path or paths resulting from the operation. To merge two page items into a single page item, for example, you would use something like the approach shown in the following fragment (for the complete script, refer to AddPath).
//Given a rectangle "myRectangle" and an Oval "myOval"... myRectangle.addPath(myOval);

The excludeOverlapPath method creates a new path based on the non-intersecting areas of two or more overlapping page items, as shown in the following script fragment (for the complete script, refer to ExcludeOverlapPath).
//Given a rectangle "myRectangle" and an Oval "myOval"... myRectangle.excludeOverlapPath(myOval);

The intersectPath method creates a new page item from the area of intersection of two or more page items, as shown in the following script fragment (for the complete script, refer to IntersectPath).
//Given a rectangle "myRectangle" and an Oval "myOval"... myRectangle.intersect(myOval);

The minusBack method removes the area of intersection of the back-most object from the page item or page items in front of it, as shown in the following script fragment (for the complete script, refer to MinusBack).
//Given a rectangle "myRectangle" and an Oval "myOval"... myRectangle.minusBack(myOval);

The subtractPath method removes the area of intersection of the frontmost object from the page item or page items behind it, as shown in the following script fragment (for the complete script, refer to SubtractPath).
//Given a rectangle "myRectangle" and an Oval "myOval"... myOval.subtractPath(myRetangle);

CHAPTER 4: Working with Page Items

Transforming Page Items

Converting Page Item Shapes

InDesign page items can be converted to other shapes using the options in the Object > Convert Shape menu or the Pathfinder panel (Window > Object and Layout > Pathfinder). In InDesign scripting, page items support the convertShape method, as demonstrated in the following script fragment (for the complete script, refer to ConvertShape).
//Given a rectangle "myRectangle"... myRectangle.convertShape(ConvertShapeOptions.convertToRoundedRectangle);

The convertShape method also provides a way to open or close reverse paths, as shown in the following script fragment (for the complete script, refer to OpenPath).
//Given a rectangle "myRectangle"... myRectangle.convertShape(ConvertShapeOptions.convertToOpenPath);

Transforming Page Items

CoordinateSpaces.parentCoordinates is the coordinate space of the parent of the object. Any

transformations applied to the parent affect the parent coordinates; for example, rotating the parent object changes the angle of the horizontal and vertical axes of this coordinate space. In this case, the parent object refers to the group or page item containing the object; if the parent of the object is a page or spread, parent coordinates are the same as spread coordinates.
CoordinateSpaces.innerCoordinates is the coordinate space of the object itself. CoordinateSpaces.spreadCoordinates is the coordinate space of the spread. The origin of this space is at the center of the spread, and does not correspond to the rulers you see in the user interface.

The following script shows the differences between the coordinate spaces. (For the complete script, see CoordinateSpaces.)
var myRectangle = app.documents.item(0).pages.item(0).groups.item(-1).rectangles.item(0); alert("The page contains a group which has been\rrotated 45 degrees (counterclockwise).\rThe rectangle inside the group was\rrotated 45 degrees counterclockwise\rbefore it was added to the group.\r\rWatch as we apply a series of scaling\roperations in different coordinate spaces."); var myTransformationMatrix = app.transformationMatrices.add({horizontalScaleFactor:2}); //Transform the rectangle using inner coordinates. myRectangle.transform(CoordinateSpaces.innerCoordinates, AnchorPoint.centerAnchor, myTransformationMatrix); //Select the rectangle and display an alert. app.select(myRectangle); alert("Transformed by inner coordinates."); //Undo the transformation. app.documents.item(0).undo(); //Transform using parent coordinates. myRectangle.transform(CoordinateSpaces.parentCoordinates, AnchorPoint.centerAnchor, myTransformationMatrix); app.select(myRectangle); alert("Transformed by parent coordinates."); app.documents.item(0).undo(); //Transform using pasteboard coordinates. myRectangle.transform(CoordinateSpaces.pasteboardCoordinates, AnchorPoint.centerAnchor, myTransformationMatrix); app.select(myRectangle); alert("Transformed by pasteboard coordinates."); app.documents.item(0).undo();

Transformation origin
The transformation origin is the center point of the transformation. The transformation origin can be specified in several ways:

Bounds space:

anchor An anchor point on the object itself.

AnchorPoint.centerAnchor

anchor, bounds type An anchor point specified relative to the geometric bounds of the object (BoundingBoxLimits.geometricPathBounds) or the visible bounds of the object (BoundingBoxLimits.outerStrokeBounds).

CHAPTER 4: Working with Page Items

Transforming Page Items

[AnchorPoint.bottomLeftAnchor, BoundingBoxLimits.outerStrokeBounds]

anchor, bounds type, coordinate system An anchor point specified as the geometric bounds of the object (BoundingBoxLimits.geometricPathBounds) or the visible bounds of the object (BoundingBoxLimits.outerStrokeBounds) in a given coordinate space.
[AnchorPoint.bottomLeftAnchor, BoundingBoxLimits.outerStrokeBounds, CoordinateSpaces.pasteboardCoordinates]

(x,y), bounds type A point specified relative to the geometric bounds of the object (BoundingBoxLimits.geometricPathBounds) or the visible bounds of the object (BoundingBoxLimits.outerStrokeBounds). In this case, the top-left corner of the bounding box is (0, 0); the bottom-right corner, (1, 1). The center anchor is located at (.5, .5).
[[.5, .5], BoundingBoxLimits.outerStrokeBounds]

(x, y), bounds type, coordinate space A point specified relative to the geometric bounds of the object (BoundingBoxLimits.geometricPathBounds) or the visible bounds of the object (BoundingBoxLimits.outerStrokeBounds) in a given coordinate space. In this case, the top-left corner of the bounding box is (0, 0); the bottom-right corner, (1, 1). The center anchor is located at (.5, .5).
[[.5, .5], BoundingBoxLimits.outerStrokeBounds, CoordinateSpaces.pasteboardCoordinates]

Ruler space:

(x, y), page index A point, relative to the ruler origin on a specified page of a spread.
[[72, 144], 0]

(x, y), location A point, relative to the parent page of the specified location of the object. Location can be specified as an anchor point or a coordinate pair. It can be specified relative to the objects geometric or visible bounds, and it can be specified in a given coordinate space.
[[72, 144], AnchorPoint.centerAnchor]

Transform space:

(x, y) A point in the pasteboard coordinate space.

[72, 72]

(x, y), coordinate system A point in the specified coordinate space.

[[72, 72], CoordinateSpaces.parentCoordinates]

((x, y)) A point in the coordinate space given as the in parameter of the transform method.
[[72, 72]]

The following script example shows how to use some of the transformation origin options. (For the complete script, see TransformationOrigin.)

CHAPTER 4: Working with Page Items

Transforming Page Items

//Rotate around the duplicated rectangle's center point. myNewRectangle.transform(CoordinateSpaces.pasteboardCoordinates, AnchorPoint.centerAnchor, myTransformationMatrix); //Rotate the rectangle around the ruler location [-100, -100]. //Note that the anchor point specified here specifes the page //containing the point--*not* that transformation point itself. //The transformation gets the ruler coordinate [-100, -100] based //on that page. Setting the considerRulerUnits parameter to true makes //certain that the transformation uses the current ruler units. myNewRectangle.transform(CoordinateSpaces.pasteboardCoordinates, [[-100, -100], AnchorPoint.topLeftAnchor], myTransformationMatrix, undefined, true);

Resolving locations
Sometimes, you need to get the location of a point specified in one coordinate space in the context of another coordinate space. To do this, you use the resolve method, as shown in the following script example. (For the complete script, see ResolveLocation.)
var myPageLocation = myRectangle.resolve([[72, 72], AnchorPoint.topRightAnchor], CoordinateSpaces.pasteboardCoordinates, true); //resolve() returns an array containing a single item. alert("X: " + myPageLocation[0][0] + "\rY: " + myPageLocation[0][1]);

Transforming points
You can transform points as well as objects, which means scripts can perform a variety of mathematical operations without having to include the calculations in the script itself. The ChangeCoordinates sample script shows how to draw a series of regular polygons using this approach:
//General purpose routine for drawing regular polygons from their center point. function myDrawPolygon(myParent, myCenterPoint, myNumberOfPoints, myRadius, myStarPolygon, myStarInset){ var myTransformedPoint; var myPathPoints = new Array; var myPoint = [0,0]; if(myStarPolygon == true){ myNumberOfPoints = myNumberOfPoints * 2; } var myInnerRadius = myRadius * myStarInset; var myAngle = 360/myNumberOfPoints; var myRotateMatrix = app.transformationMatrices.add({ counterclockwiseRotationAngle:myAngle}); var myOuterTranslateMatrix = app.transformationMatrices.add({ horizontalTranslation:myRadius}); var myInnerTranslateMatrix = app.transformationMatrices.add({ horizontalTranslation:myInnerRadius});

CHAPTER 4: Working with Page Items

Transforming Page Items

for (var myPointCounter = 0; myPointCounter < myNumberOfPoints; myPointCounter ++){ //Translate the point to the inner/outer radius. if ((myStarInset == 1)||(myIsEven(myPointCounter)==true)){ myTransformedPoint = myOuterTranslateMatrix.changeCoordinates(myPoint); } else{ myTransformedPoint = myInnerTranslateMatrix.changeCoordinates(myPoint); } myTransformedPoint = myRotateMatrix.changeCoordinates(myTransformedPoint); myPathPoints.push(myTransformedPoint); myRotateMatrix = myRotateMatrix.rotateMatrix(myAngle); } //Create a new polygon. var myPolygon = myParent.polygons.add(); //Set the entire path of the polygon to the array we've created. myPolygon.paths.item(0).entirePath = myPathPoints; //If the center point is somewhere other than [0,0], //translate the polygon to the center point. if((myCenterPoint[0] != 0)||((myCenterPoint[1] != 0))){ var myTranslateMatrix = app.transformationMatrices.add({ horizontalTranslation:myCenterPoint[0], verticalTranslation:myCenterPoint[1]}); myPolygon.transform(CoordinateSpaces.pasteboardCoordinates, AnchorPoint.centerAnchor, myTranslateMatrix); } } //This function returns true if myNumber is even, false if it is not. function myIsEven(myNumber){ var myResult = (myNumber%2)?false:true; return myResult; }

You also can use the changeCoordinates method to change the positions of curve control points, as shown in the FunWithTransformations sample script.

Transforming again
Just as you can apply a transformation or sequence of transformations again in the user interface, you can do so using scripting. There are four methods for applying transformations again:
transformAgain transformAgainIndividually transformSequenceAgain transformSequenceAgainIndividually

The following script fragment shows how to use transformAgain. (For the complete script, see TransformAgain.)

var myDocument = app.activeDocument; //Set the measurement units to points. myDocument.viewPreferences.horizontalMeasurementUnits = MeasurementUnits.points; myDocument.viewPreferences.verticalMeasurementUnits = MeasurementUnits.points; //Create a text frame on the current page. var myTextFrame = app.activeWindow.activePage.textFrames.add(); //Set the bounds of the text frame. myTextFrame.geometricBounds = [72, 72, 96, 288]; //Fill the text frame with placeholder text. myTextFrame.contents = TextFrameContents.placeholderText; //Now add text beyond the end of the text frame. myTextFrame.insertionPoints.item(-1).contents = "\rThis is some overset text"; alert("The last paragraph in this alert should be \"This is some overset text\". Is it?\r" + myTextFrame.contents); alert("The last paragraph in this alert should be \"This is some overset text\". Is it?\r" + myTextFrame.parentStory.contents);

For more on understanding the relationships between text objects in an InDesign document, see Understanding text objects on page 71.

Replacing text
The following script replaces a word with a phrase by changing the contents of the appropriate object (for the complete script, see ReplaceWord):
var myDocument = app.activeDocument; //Set the measurement units to points. myDocument.viewPreferences.horizontalMeasurementUnits = MeasurementUnits.points; myDocument.viewPreferences.verticalMeasurementUnits = MeasurementUnits.points; //Create a text frame on the current page. var myTextFrame = app.activeWindow.activePage.textFrames.add({geometricBounds:[72, 72, 288, 288], contents:"This is some example text."}); //Replace the third word "some" with the phrase //"a little bit of". myTextFrame.parentStory.words.item(2).contents = "a little bit of";

The following script replaces the text in a paragraph (for the complete script, see ReplaceText):
//Replace the text in the second paragraph without replacing //the return character at the end of the paragraph. To do this, //we'll use the ItemByRange method. var myStartCharacter = myTextFrame.parentStory.paragraphs.item(1).characters.item(0); var myEndCharacter = myTextFrame.parentStory.paragraphs.item(1).characters.item(-2); myTextFrame.texts.itemByRange(myStartCharacter, myEndCharacter).contents = "This text replaces the text in paragraph 2."

In the script above, we excluded the return character because deleting the return might change the paragraph style applied to the paragraph. To do this, we used ItemByRange method, and we supplied two charactersthe starting and ending characters of the paragraphas parameters.

Inserting special characters

Because the ExtendScript Toolkit supports Unicode, you can simply enter Unicode characters in text strings you send to InDesign. Alternately, you can use the JavaScript method of explicitly entering Unicode characters by their glyph ID number: \unnnn (where nnnn is the Unicode code for the character). The following script shows several ways to enter special characters. (We omitted the myGetBounds function

CHAPTER 5: Text and Type

Placing text and setting text-import preferences

from this listing; you can find it in Creating a text frame on page 60 or in the SpecialCharacters tutorial script.)
var myDocument = app.documents.item(0); //Create a text frame on the current page. var myTextFrame = myDocument.pages.item(0).textFrames.add(); //Set the bounds of the text frame. myTextFrame.geometricBounds = myGetBounds(myDocument, myDocument.pages.item(0)); //Entering special characters directly. myTextFrame.contents = "Registered trademark: \rCopyright: \rTrademark: ?\r"; //Entering special characters by their Unicode glyph ID value: myTextFrame.parentStory.insertionPoints.item(-1).contents = "Not equal to: \u2260\rSquare root: \u221A\rParagraph: \u00B6\r"; //Entering InDesign special characters by their enumerations: myTextFrame.parentStory.insertionPoints.item(-1).contents = "Automatic page number marker:"; myTextFrame.parentStory.insertionPoints.item(-1).contents = SpecialCharacters.autoPageNumber; myTextFrame.parentStory.insertionPoints.item(-1).contents = "\r"; myTextFrame.parentStory.insertionPoints.item(-1).contents = "Section symbol:"; myTextFrame.parentStory.insertionPoints.item(-1).contents = SpecialCharacters.sectionSymbol; myTextFrame.parentStory.insertionPoints.item(-1).contents = "\r"; myTextFrame.parentStory.insertionPoints.item(-1).contents = "En dash:"; myTextFrame.parentStory.insertionPoints.item(-1).contents = SpecialCharacters.enDash; myTextFrame.parentStory.insertionPoints.item(-1).contents = "\r";

The easiest way to find the Unicode ID for a character is to use InDesign's Glyphs palette: move the cursor over a character in the palette, and InDesign displays its Unicode value. To learn more about Unicode, visit http://www.unicode.org.

Placing text and setting text-import preferences

In addition to entering text strings, you can place text files created using word processors and text editors. The following script shows how to place a text file on a document page (for the complete script, see PlaceTextFile):
var myDocument = app.documents.item(0); //Set the measurement units to points. myDocument.viewPreferences.horizontalMeasurementUnits = MeasurementUnits.points; myDocument.viewPreferences.verticalMeasurementUnits = MeasurementUnits.points; //Get the current page. var myPage = myDocument.pages.item(0); //Get the top and left margins to use as a place point. var myX = myPage.marginPreferences.left; var myY = myPage.marginPreferences.top; //Autoflow a text file on the current page. //Parameters for Page.place(): //File as File object, //[PlacePoint as Array [x, y]] //[DestinationLayer as Layer object] //[ShowingOptions as Boolean = False] //[Autoflowing as Boolean = False] //You'll have to fill in your own file path. var myStory = myPage.place(File("/c/test.txt"), [myX, myY], undefined, false, true)[0]; //Note that if the PlacePoint parameter is inside a column, only the vertical (y) //coordinate will be honored--the text frame will expand horizontally to fit the column.

CHAPTER 5: Text and Type

Placing text and setting text-import preferences

The following script shows how to place a text file in an existing text frame. (We omitted the myGetBounds function from this listing; you can find it in Creating a text frame on page 60, or see the PlaceTextFileInFrame tutorial script.)
var myDocument = app.documents.item(0); var myPage = myDocument.pages.item(0); var myTextFrame = myPage.textFrames.add({geometricBounds:myGetBounds(myDocument,myPage)}); //Place a text file in the text frame. //Parameters for TextFrame.place(): //File as File object, //[ShowingOptions as Boolean = False] //You'll have to fill in your own file path. myTextFrame.place(File("/c/test.txt"));

Exporting text and setting text-export preferences

The following script sets tagged text export preferences (for the complete script, see TaggedTextExportPreferences):
with(app.taggedTextExportPreferences){ //Options for characterSet: //TagTextExportCharacterSet.ansi //TagTextExportCharacterSet.ascii //TagTextExportCharacterSet.gb18030 //TagTextExportCharacterSet.ksc5601 //TagTextExportCharacterSet.shiftJIS //TagTextExportCharacterSet.unicode characterSet = TagTextExportCharacterSet.unicode; //tagForm options: //TagTextForm.abbreviated //TagTextForm.verbose tagForm = TagTextForm.verbose; }

You cannot export all text in a document in one step. Instead, you need to either combine the text in the document into a single story and then export that story, or combine the text files by reading and writing files via scripting. The following script demonstrates the former approach. (We omitted the myGetBounds function from this listing; you can find it in Creating a text frame on page 60, or see the ExportAllText tutorial script.) For any format other than text only, the latter method can become quite complex.
if(app.documents.length != 0){ if(app.documents.item(0).stories.length != 0){ myExportAllText(app.documents.item(0).name); } }

Here is the ExportAllText function referred to in the above fragment:

function myExportAllText(myDocumentName){ var myStory; //File name for the exported text. Fill in a valid file path on your system. var myFileName = "/c/test.txt"; //If you want to add a separator line between stories, set myAddSeparator to true. var myAddSeparator = true; var myNewDocument = app.documents.add(); var myDocument = app.documents.item(myDocumentName); var myTextFrame = myNewDocument.pages.item(0).textFrames.add( {geometricBounds:myGetBounds(myNewDocument, myNewDocument.pages.item(0))}); var myNewStory = myTextFrame.parentStory; for(myCounter = 0; myCounter < myDocument.stories.length; myCounter++){ myStory = myDocument.stories.item(myCounter); //Export the story as tagged text. myStory.exportFile(ExportFormat.taggedText, File(myFileName)); //Import (place) the file at the end of the temporary story. myNewStory.insertionPoints.item(-1).place(File(myFileName)); //If the imported text did not end with a return, enter a return //to keep the stories from running together. if(myCounter != myDocument.stories.length -1){ if(myNewStory.characters.item(-1).contents != "\r"){ myNewStory.insertionPoints.item(-1).contents = "\r"; }

CHAPTER 5: Text and Type

Exporting text and setting text-export preferences

if(myAddSeparator == true){ myNewStory.insertionPoints.item(-1).contents = "----------------------------------------\r"; } } } myNewStory.exportFile(ExportFormat.taggedText, File("/c/test.txt")); myNewDocument.close(SaveOptions.no); }

Do not assume you are limited to exporting text using existing export filters. Since JavaScript can write text files to disk, you can have your script traverse the text in a document and export it in any order you like, using whatever text mark-up scheme you prefer. Here is a very simple example that shows how to export InDesign text as HTML. (We omitted the myGetBounds function from this listing; you can find it in Creating a text frame on page 60, or see the ExportHTML tutorial script.)
var myStory, myParagraph, myString, myTag, myStartTag; var myEndTag, myTextStyleRange, myTable; //Use the myStyleToTagMapping array to set up your paragraph style to tag mapping. var myStyleToTagMapping = new Array; //For each style to tag mapping, add a new item to the array. myStyleToTagMapping.push(["body_text", "p"]); myStyleToTagMapping.push(["heading1", "h1"]); myStyleToTagMapping.push(["heading2", "h2"]); myStyleToTagMapping.push(["heading3", "h3"]); //End of style to tag mapping. if(app.documents.length !=0){ if(app.documents.item(0).stories.length != 0){ //Open a new text file. var myTextFile = File.saveDialog("Save HTML As", undefined); //If the user clicked the Cancel button, the result is null. if(myTextFile != null){ //Open the file with write access. myTextFile.open("w"); //Iterate through the stories. for(var myCounter = 0; myCounter < app.documents.item(0).stories.length; myCounter ++){ myStory = app.documents.item(0).stories.item(myCounter); for(var myParagraphCounter = 0; myParagraphCounter < myStory.paragraphs.length; myParagraphCounter ++){ myParagraph = myStory.paragraphs.item(myParagraphCounter); if(myParagraph.tables.length == 0){ if(myParagraph.textStyleRanges.length == 1){ //If the paragraph is a simple paragraph--no tables, no local //formatting--then simply export the text of the pararaph with //the appropriate tag. myTag = myFindTag(myParagraph.appliedParagraphStyle.name, myStyleToTagMapping); //If the tag comes back empty, map it to the //basic paragraph tag. if(myTag == ""){ myTag = "p"; } myStartTag = "<" + myTag + ">"; myEndTag = "</" + myTag + ">";

CHAPTER 5: Text and Type

Exporting text and setting text-export preferences

//If the paragraph is not the last paragraph in the story, //omit the return character. if(myParagraph.characters.item(-1).contents == "\r"){ myString = myParagraph.texts.itemByRange( myParagraph.characters.item(0),myParagraph. characters.item(-2)).contents; } else{ myString = myParagraph.contents; } //Write the paragraphs' text to the text file. myTextFile.writeln(myStartTag + myString + myEndTag); } else{ //Handle text style range export by iterating through the text //style ranges in the paragraph.. for(var myRangeCounter = 0; myRangeCounter < myParagraph.textStyleRanges.length; myRangeCounter ++){ myTextStyleRange = myParagraph.textStyleRanges.item (myRangeCounter); if(myTextStyleRange.characters.item(-1)=="\r"){ myString = myTextStyleRange.texts.itemByRange( myTextStyleRange.characters.item(1), myTextStyleRange.characters.item(-2)).contents; } else{ myString = myTextStyleRange.contents; } switch(myTextStyleRange.fontStyle){ case "Bold": myString = "<b>" + myString + "</b>" break; case "Italic": myString = "<i>" + myString + "</i>" break; } myTextFile.write(myString); } myTextFile.write("\r"); } } else{ //Handle table export (assumes that there is only one table per //paragraph, and that the table is in the paragraph by itself). myTable = myParagraph.tables.item(0); myTextFile.writeln("<table border = 1>"); for(var myRowCounter = 0; myRowCounter < myTable.rows.length; myRowCounter ++){ myTextFile.writeln("<tr>"); for(var myColumnCounter = 0; myColumnCounter < myTable.columns.length; myColumnCounter++){ if(myRowCounter == 0){ myString = "<th>" + myTable.rows.item(myRowCounter).cells. item(myColumnCounter).texts.item(0).contents + "</th>"; }

CHAPTER 5: Text and Type

Understanding text objects

else{ myString = "<td>" + myTable.rows.item(myRowCounter). cells.item(myColumnCounter).texts.item(0).contents + "</td>"; } myTextFile.writeln(myString); } myTextFile.writeln("</tr>"); } myTextFile.writeln("</table>"); } } } //Close the text file. myTextFile.close(); } } }

Here is the myFindTag function referred to in the above script:

Understanding text objects

The following diagram shows a view of InDesign's text object model. As you can see, there are two main types of text object: layout objects (text frames), and text-stream objects (for example, stories, insertion points, characters, and words):

CHAPTER 5: Text and Type

Understanding text objects

document

story

spread, page, layer

insertionPoints characters words lines paragraphs textColumns textStyleRanges texts

textContainers textFrame insertionPoints characters words lines paragraphs textColumns textStyleRanges texts

There are many ways to get a reference to a given text object. The following diagram shows a few ways to refer to the first character in the first text frame of the first page of a new document:
document pages.item(0) textFrames.item(0) characters.item(0) textFrames.item(0) paragraphs.item(0) characters.item(0) stories.item(0) characters.item(0) stories.item(0) paragraphs.item(0) characters.item(0)

For any text stream object, the parent of the object is the story containing the object. To get a reference to the text frame (or text frames) containing the text object, use the parentTextFrames property. For a text frame, the parent of the text frame usually is the page or spread containing the text frame. If the text frame is inside a group or was pasted inside another page item, the parent of the text frame is the

CHAPTER 5: Text and Type

Understanding text objects

containing page item. If the text frame was converted to an anchored frame, the parent of the text frame is the character containing the anchored frame.

Working with text selections

Text-related scripts often act on a text selection. The following script demonstrates a way to find out whether the current selection is a text selection. Unlike many of the other sample scripts, this script does not actually do anything; it simply presents a selection-filtering routine you can use in your own scripts (for the complete script, see TextSelection).
if (app.documents.length != 0){ //If the selection contains more than one item, the selection //is not text selected with the Type tool. if (app.selection.length == 1){ //Evaluate the selection based on its type. switch (app.selection[0].constructor.name){ case "InsertionPoint": case "Character": case "Word": case "TextStyleRange": case "Line": case "Paragraph": case "TextColumn": case "Text": case "Story": //The object is a text object; pass it on to a function. myProcessText(app.selection[0]); break; //In addition to checking for the above text objects, we can //also continue if the selection is a text frame selected with //the Selection tool or the Direct Selection tool. case "TextFrame": //If the selection is a text frame, get a reference to the //text in the text frame. myProcessText(app.selection[0].texts.item(0)); break; default: alert("The selected object is not a text object. Select some text and try again."); break; } } else{ alert("Please select some text and try again."); } }

Moving and copying text

You can move a text object to another location in text using the move method. To copy the text, use the duplicate method (which is identical to the move method in every way but its name). The following script fragment shows how it works (for the complete script, see MoveText):

CHAPTER 5: Text and Type

Understanding text objects

var myDocument = app.documents.item(0); var myPage = myDocument.pages.item(0); var myTextFrameA = myPage.textFrames.item(3); var myTextFrameB = myPage.textFrames.item(2); var myTextFrameC = myPage.textFrames.item(1); var myTextFrameD = myPage.textFrames.item(0); //Move WordC between the words in TextFrameC. myTextFrameD.parentStory.paragraphs.item(-1).words.item(0).move(LocationOptions.befor e, myTextFrameC.parentStory.paragraphs.item(0).words.item(1)) //Move WordB after the word in TextFrameB. myTextFrameD.parentStory.paragraphs.item(-2).words.item(0).move(LocationOptions.after , myTextFrameB.parentStory.paragraphs.item(0).words.item(0)) //Move WordA to before the word in TextFrameA. myTextFrameD.parentStory.paragraphs.item(-3).words.item(0).move(LocationOptions.befor e, myTextFrameA.parentStory.paragraphs.item(0).words.item(0)) //Note that moving text removes it from its original location.

When you want to transfer formatted text from one document to another, you also can use the move method. Using the move or duplicate method is better than using copy and paste; to use copy and paste, you must make the document visible and select the text you want to copy. Using move or duplicate is much faster and more robust. The following script shows how to move text from one document to another using move and duplicate. (We omitted the myGetBounds function from this listing; you can find it in Creating a text frame on page 60, or see the MoveTextBetweenDocuments tutorial script.)
//Access the active document, page, and first text frame on the active page. var mySourceDocument = app.documents.item(0); var mySourcePage = myDocument.pages.item(0); var mySourceTextFrame = mySourcePage.textFrames.item(0); //Create a new document to move the text to. var myTargetDocument = app.documents.add(); var myTargetPage = app.activeWindow.activePage; //Create a text frame in the target document. var myTargetTextFrame = myTargetPage.textFrames.add({geometricBounds:myGetBounds(myTargetDocument, myTargetDocument.pages.item(0)), contents:"This is the target text. Insert the source text after this paragraph.\r"}); //Move the text from the first document to the second. This deletes //the text from the first document. mySourceTextFrame.parentStory.paragraphs.item(0).move(LocationOptions.atBeginning, myTargetTextFrame.insertionPoints.item(0)); //To duplicate (rather than move) the text, use the following: //myTextFrame.parentStory.paragraphs.item(0).duplicate(LocationOptions.atBeginning, myTargetTextFrame.insertionPoints.item(0));

When you need to copy and paste text, you can use the copy method of the application. You will need to select the text before you copy. Again, you should use copy and paste only as a last resort; other approaches are faster, less fragile, and do not depend on the document being visible. (We omitted the myGetBounds function from this listing; you can find it in Creating a text frame on page 60, or see the CopyPasteText tutorial script.)

CHAPTER 5: Text and Type

Unlinking text frames

The following example script shows how to unlink text frames (for the complete script, see UnlinkTextFrames):
//Unlink the two text frames. myTextFrameA.nextTextFrame = NothingEnum.nothing;

Removing a frame from a story

In InDesign, deleting a frame from a story does not delete the text in the frame, unless the frame is the only frame in the story. The following script fragment shows how to delete a frame and the text it contains from a story without disturbing the other frames in the story (for the complete script, see BreakFrame):
var myObjectList = new Array; //Script does nothing if no documents are open or if no objects are selected. if(app.documents.length != 0){ if(app.selection.length != 0){ //Process the objects in the selection to create a list of //qualifying objects (text frames). for(myCounter = 0; myCounter < app.selection.length; myCounter ++){ switch(app.selection[myCounter].constructor.name){ case "TextFrame": myObjectList.push(app.selection[myCounter]); break; default: if(app.selection.length == 1){ //If text is selected, then get the parent text frame. switch(app.selection[myCounter].constructor.name){ case "Text": case "InsertionPoint": case "Character": case "Word": case "Line": case "TextStyleRange": case "Paragraph": case "TextColumn": myObjectList.push(app.selection[myCounter]. parentTextFrames[0]); break; } }

CHAPTER 5: Text and Type

Working with text frames

break; } } //If the object list is not empty, pass it on to the function //that does the real work. if(myObjectList.length != 0){ myBreakFrames(myObjectList); } } }

Here is the myBreakFrames function referred to in the above script.

CHAPTER 5: Text and Type

Working with text frames

Splitting all frames in a story

The following script fragment shows how to split all frames in a story into separate, independent stories, each containing one unlinked text frame (for the complete script, see SplitStory):
if(app.documents.length != 0){ if(app.selection.length != 0){ //Get the first item in the selection. var mySelection = app.selection[0]; //Process the selection. If text or a text frame is //selected, do something; otherwise, do nothing. switch(mySelection.constructor.name){ case "Text": case "InsertionPoint": case "Character": case "Word": case "Line": case "TextStyleRange": case "Paragraph": case "TextColumn": case "TextFrame": //If the text frame is the only text frame in the story, do nothing. if(mySelection.parentStory.textContainers.length != 1){ //Splitting the story is a two-step process: first, duplicate //the text frames, second, delete the original text frames. mySplitStory(mySelection.parentStory); myRemoveFrames(mySelection.parentStory); } break; } } }

Here is the mySplitStory function referred to in the above script:

leftIndent = 0; ligatures = true; maximumGlyphScaling = 100; maximumLetterSpacing = 0; maximumWordSpacing = 160; minimumGlyphScaling = 100; minimumLetterSpacing = 0; minimumWordSpacing = 80; noBreak = false; otfContextualAlternate = true; otfDiscretionaryLigature = false; otfFigureStyle = OTFFigureStyle.proportionalOldstyle; otfFraction = true; otfHistorical = false; otfOrdinal = false; otfSlashedZero = false; otfSwash = false; otfTitling = false; overprintFill = false; overprintStroke = false; pointSize = 11; position = Position.normal; rightIndent = 0; ruleAbove = false; if(ruleAbove == true){ ruleAboveColor = myDocument.colors.item("Black"); ruleAboveGapColor = myDocument.swatches.item("None"); ruleAboveGapOverprint = false; ruleAboveGapTint = 100; ruleAboveLeftIndent = 0; ruleAboveLineWeight = .25; ruleAboveOffset = 14; ruleAboveOverprint = false; ruleAboveRightIndent = 0; ruleAboveTint = 100; ruleAboveType = myDocument.strokeStyles.item("Solid"); ruleAboveWidth = RuleWidth.columnWidth; } ruleBelow = false; if(ruleBelow == true){ ruleBelowColor = myDocument.colors.item("Black"); ruleBelowGapColor = myDocument.swatches.item("None"); ruleBelowGapOverprint = false; ruleBelowGapTint = 100; ruleBelowLeftIndent = 0; ruleBelowLineWeight = .25; ruleBelowOffset = 0; ruleBelowOverprint = false; ruleBelowRightIndent = 0; ruleBelowTint = 100; ruleBelowType = app.strokeStyles.item("Solid"); ruleBelowWidth = RuleWidth.columnWidth; } singleWordJustification = SingleWordJustification.leftAlign; skew = 0; spaceAfter = 0; spaceBefore = 0; startParagraph = StartParagraph.anywhere; strikeThru = false;

CHAPTER 5: Text and Type

Formatting text

if(strikeThru == true){ strikeThroughColor = myDocument.colors.item("Black"); strikeThroughGapColor = myDocument.swatches.item("None"); strikeThroughGapOverprint = false; strikeThroughGapTint = 100; strikeThroughOffset = 3; strikeThroughOverprint = false; strikeThroughTint = 100; strikeThroughType = myDocument.strokeStyles.item("Solid"); strikeThroughWeight = .25; } strokeColor = myDocument.swatches.item("None"); strokeTint = 100; strokeWeight = 0; tracking = 0; underline = false; if(underline == true){ underlineColor = myDocument.colors.item("Black"); underlineGapColor = myDocument.swatches.item("None"); underlineGapOverprint = false; underlineGapTint = 100; underlineOffset = 3; underlineOverprint = false; underlineTint = 100; underlineType = myDocument.strokeStyles.item("Solid"); underlineWeight = .25 } verticalScale = 100; }

Working with fonts

The fonts collection of the InDesign application object contains all fonts accessible to InDesign. The fonts collection of a document, by contrast, contains only those fonts used in the document. The fonts collection of a document also contains any missing fontsfonts used in the document that are not accessible to InDesign. The following script shows the difference between application fonts and document fonts. (We omitted the myGetBounds function here; for the complete script, see FontCollections.)
var myApplicationFonts = app.fonts; var myDocument = app.documents.item(0); var myStory = myDocument.stories.item(0); var myDocumentFonts = myDocument.fonts; var myFontNames = myApplicationFonts.everyItem().name; var myDocumentFontNames = myDocument.fonts.everyItem().name; var myString = "Document Fonts:\r"; for(var myCounter = 0;myCounter<myDocumentFontNames.length; myCounter++){ myString += myDocumentFontNames[myCounter] + "\r"; } myString += "\rApplication Fonts:\r"; for(var myCounter = 0;myCounter<myFontNames.length; myCounter++){ myString += myFontNames[myCounter] + "\r"; } myStory.contents = myString;

NOTE: Font names typically are of the form familyName<tab>fontStyle, where familyName is the name of the font family, <tab> is a tab character, and fontStyle is the name of the font style. For example:
"Adobe Caslon Pro<tab>Semibold Italic"

CHAPTER 5: Text and Type

Formatting text

NOTE: The findChangeGrepOptions object lacks two properties of the findChangeTextOptions object: wholeWord and caseSensitive. This is because you can set these options using the regular expression string itself. Use (?i) to turn case sensitivity on and (?-i) to turn case sensitivity off. Use \> to match the beginning of a word and \< to match the end of a word, or use \b to match a word boundary. One handy use for grep find/change is to convert text mark-up (i.e., some form of tagging plain text with formatting instructions) into InDesign formatted text. PageMaker paragraph tags (which are not the same as PageMaker tagged-text format files) are an example of a simplified text mark-up scheme. In a text file marked up using this scheme, paragraph style names appear at the start of a paragraph, as shown below:

CHAPTER 5: Text and Type

Finding and changing text

<heading1>This is a heading. <body_text>This is body text.

We can create a script that uses grep find in conjunction with text find/change operations to apply formatting to the text and remove the mark-up tags, as shown in the following script fragment (from the ReadPMTags tutorial script):
var myDocument = app.documents.item; var myStory = myDocument.stories.item(0); myReadPMTags(myStory);

Here is the myReadPMTags function referred to in the above script.

CHAPTER 5: Text and Type

Finding and changing text

//Reset the findGrepPreferences. app.findGrepPreferences = NothingEnum.nothing; } function myRemoveDuplicates(myArray){ //Semi-clever method of removing duplicate array items; much faster //than comparing every item to every other item! var myNewArray = new Array; myArray = myArray.sort(); myNewArray.push(myArray[0]); if(myArray.length > 1){ for(var myCounter = 1; myCounter < myArray.length; myCounter ++){ if(myArray[myCounter] != myNewArray[myNewArray.length -1]){ myNewArray.push(myArray[myCounter]); } } } return myNewArray; }

Using glyph search

You can find and change individual characters in a specific font using the findGlyph and changeGlyph methods and the associated findGlyphPreferences and changeGlyphPreferences objects. The following scripts fragment shows how to find and change a glyph in an example document (for the complete script, see FindChangeGlyph):
//Clear glyph search preferences. app.findGlyphPreferences = NothingEnum.nothing; app.changeGlyphPreferences = NothingEnum.nothing; var myDocument = app.documents.item(0); //You must provide a font that is used in the document for the //appliedFont property of the findGlyphPreferences object. app.findGlyphPreferences.appliedFont = app.fonts.item("Times New RomanRegular"); //Provide the glyph ID, not the glyph Unicode value. app.findGlyphPreferences.glyphID = 374; //The appliedFont of the changeGlyphPreferences object can be //any font available to the application. app.changeGlyphPreferences.appliedFont = app.fonts.item("ITC Zapf DingbatsMedium"); app.changeGlyphPreferences.glyphID = 85; myDocument.changeGlyph(); //Clear glyph search preferences. app.findGlyphPreferences = NothingEnum.nothing; app.changeGlyphPreferences = NothingEnum.nothing;

CHAPTER 5: Text and Type

Working with tables

Tables can be created from existing text using the convertTextToTable method, or an empty table can be created at any insertion point in a story. The following script fragment shows three different ways to create a table (for the complete script, see MakeTable):
var myDocument = app.documents.item(0); var myStory = myDocument.stories.item(0); var myStartCharacter = myStory.paragraphs.item(6).characters.item(0); var myEndCharacter = myStory.paragraphs.item(6).characters.item(-2); var myText = myStory.texts.itemByRange(myStartCharacter, myEndCharacter); //The convertToTable method takes three parameters: //[ColumnSeparator as string] //[RowSeparator as string] //[NumberOfColumns as integer] (only used if the ColumnSeparator //and RowSeparator values are the same) //In the last paragraph in the story, columns are separated by commas //and rows are separated by semicolons, so we provide those characters //to the method as parameters. var myTable = myText.convertToTable(",",";"); var myStartCharacter = myStory.paragraphs.item(1).characters.item(0); var myEndCharacter = myStory.paragraphs.item(4).characters.item(-2); var myText = myStory.texts.itemByRange(myStartCharacter, myEndCharacter); //In the second through the fifth paragraphs, colums are separated by //tabs and rows are separated by returns. These are the default delimiter //parameters, so we don't need to provide them to the method. var myTable = myText.convertToTable(); //You can also explicitly add a table--you don't have to convert text to a table. var myTable = myStory.insertionPoints.item(-1).tables.add(); myTable.columnCount = 3; myTable.bodyRowCount = 3;

The following script fragment shows how to merge table cells. (For the complete script, see MergeTableCells.)
var myDocument = app.documents.item(0); var myStory = myDocument.stories.item(0); var myTable = myStory.insertionPoints.item(-1).tables.add(); myTable.columnCount = 4; myTable.bodyRowCount = 4; //Merge all of the cells in the first column. myTable.cells.item(0).merge(myTable.columns.item(0).cells.item(-1)); //Convert column 2 into 2 cells (rather than 4). myTable.columns.item(1).cells.item(-1).merge(myTable.columns.item(1).cells.item(-2)); myTable.columns.item(1).cells.item(0).merge(myTable.columns.item(1).cells.item(1)); //Merge the last two cells in row 1. myTable.rows.item(0).cells.item(-2).merge(myTable.rows.item(0).cells.item(-1)); //Merge the last two cells in row 3. myTable.rows.item(2).cells.item(-2).merge(myTable.rows.item(2).cells.item(-1));

CHAPTER 5: Text and Type

Working with tables

The following script fragment shows how to split table cells. (For the complete script, see SplitTableCells.)
var myStory = myDocument.stories.item(0); var myTable = myStory.insertionPoints.item(-1).tables.add(); myTable.columnCount = 1; myTable.bodyRowCount = 1; var myArray = myGetBounds(myDocument, myDocument.pages.item(0)) var myWidth = myArray[3]-myArray[1]; myTable.columns.item(0).width = myWidth; myTable.cells.item(0).split(HorizontalOrVertical.horizontal); myTable.columns.item(0).split(HorizontalOrVertical.vertical); myTable.cells.item(0).split(HorizontalOrVertical.vertical); myTable.rows.item(-1).split(HorizontalOrVertical.horizontal); myTable.cells.item(-1).split(HorizontalOrVertical.vertical); for(myRowCounter = 0; myRowCounter < myTable.rows.length; myRowCounter ++){ myRow = myTable.rows.item(myRowCounter); for(myCellCounter = 0; myCellCounter < myRow.cells.length; myCellCounter ++){ myString = "Row: " + myRowCounter + " Cell: " + myCellCounter; myRow.cells.item(myCellCounter).contents = myString; } }

The following script fragment shows how to create header and footer rows in a table (for the complete script, see HeaderAndFooterRows):
var myDocument = app.documents.item(0); var myTable = myDocument.stories.item(0).tables.item(0); //Convert the first row to a header row. myTable.rows.item(0).rowType = RowTypes.headerRow; //Convert the last row to a footer row. myTable.rows.item(-1).rowType = RowTypes.footerRow;

The following script fragment shows how to apply formatting to a table (for the complete script, see TableFormatting):
var myDocument = app.documents.item(0); var myTable = myDocument.stories.item(0).tables.item(0); //Convert the first row to a header row. myTable.rows.item(0).rowType = RowTypes.headerRow; //Use a reference to a swatch, rather than to a color. myTable.rows.item(0).fillColor = myDocument.swatches.item("DGC1_446b"); myTable.rows.item(0).fillTint = 40; myTable.rows.item(1).fillColor = myDocument.swatches.item("DGC1_446a"); myTable.rows.item(1).fillTint = 40; myTable.rows.item(2).fillColor = myDocument.swatches.item("DGC1_446a"); myTable.rows.item(2).fillTint = 20; myTable.rows.item(3).fillColor = myDocument.swatches.item("DGC1_446a"); myTable.rows.item(3).fillTint = 40; //Use everyItem to set the formatting of multiple cells at once. myTable.cells.everyItem().topEdgeStrokeColor = myDocument.swatches.item("DGC1_446b"); myTable.cells.everyItem().topEdgeStrokeWeight = 1; myTable.cells.everyItem().bottomEdgeStrokeColor = myDocument.swatches.item("DGC1_446b"); myTable.cells.everyItem().bottomEdgeStrokeWeight = 1; //When you set a cell stroke to a swatch, make certain //that you also set the stroke weight. myTable.cells.everyItem().leftEdgeStrokeColor = myDocument.swatches.item("None"); myTable.cells.everyItem().leftEdgeStrokeWeight = 0; myTable.cells.everyItem().rightEdgeStrokeColor = myDocument.swatches.item("None"); myTable.cells.everyItem().rightEdgeStrokeWeight = 0;

CHAPTER 5: Text and Type

Working with tables

The following script fragment shows how to add alternating row formatting to a table (for the complete script, see AlternatingRows):
//Given a table "myTable," apply alternating fills to the table. myTable.alternatingFills = AlternatingFillsTypes.alternatingRows; myTable.startRowFillColor = myDocument.swatches.item("DGC1_446a"); myTable.startRowFillTint = 60; myTable.endRowFillColor = myDocument.swatches.item("DGC1_446b"); myTable.endRowFillTint = 50;

The following script fragment shows how to process the selection when text or table cells are selected. In this example, the script displays an alert for each selection condition, but a real production script would then do something with the selected item(s). (For the complete script, see TableSelection.)
if(app.documents.length != 0){ if(app.selection.length != 0){ switch(app.selection[0].constructor.name){ //When a row, a column, or a range of cells is selected, //the type returned is "Cell" case "Cell": alert("A cell is selected."); break; case "Table": alert("A table is selected."); break; case "InsertionPoint": case "Character": case "Word": case "TextStyleRange": case "Line": case "Paragraph": case "TextColumn": case "Text": if(app.selection[0].parent.constructor.name == "Cell"){ alert("The selection is inside a table cell."); } break; case "Rectangle": case "Oval": case "Polygon": case "GraphicLine": if(app.selection[0].parent.parent.constructor.name == "Cell"){ alert("The selection is inside a table cell."); } break; case "Image": case "PDF": case "EPS": if(app.selection[0].parent.parent.parent.constructor.name == "Cell"){ alert("The selection is inside a table cell."); } break; default: alert("The selection is not inside a table."); break; } } }

CHAPTER 5: Text and Type

Path text

Path text
You can add path text to any rectangle, oval, polygon, graphic line, or text frame. The following script fragment shows how to add path text to a page item (for the complete script, see PathText):
//Given a document "myDocument" with a rectangle on page 1... var myPage = myDocument.pages.item(0); var myRectangle = myPage.rectangles.item(0); var myTextPath = myRectangle.textPaths.add({contents:"This is path text."});

To link text paths to another text path or text frame, use the nextTextFrame and previousTextFrame properties, just as you would for a text frame (see Working with text frames on page 76).

Autocorrect
The autocorrect feature can correct text as you type. The following script shows how to use it (for the complete script, see Autocorrect):
//The autocorrect preferences object turns the //autocorrect feature on or off. app.autoCorrectPreferences.autoCorrect = true; app.autoCorrectPreferences.autoCorrectCapitalizationErrors = true; //Add a word pair to the autocorrect list. Each AutoCorrectTable is linked //to a specific language. var myAutoCorrectTable = app.autoCorrectTables.item("English: USA"); //To safely add a word pair to the auto correct table, get the current //word pair list, then add the new word pair to that array, and then //set the autocorrect word pair list to the array. var myWordPairList = myAutoCorrectTable.autoCorrectWordPairList; //Add a new word pair to the array. myWordPairList.push(["paragarph", "paragraph"]); //Update the word pair list. myAutoCorrectTable.autoCorrectWordPairList = myWordPairList; //To clear all autocorrect word pairs in the current dictionary: //myAutoCorrectTable.autoCorrectWordPairList = [[]];

Footnotes
The following script fragment shows how to add footnotes to a story (for the complete script, including the myGetRandom function, see Footnotes):
var myDocument = app.documents.item(0); var myPage = myDocument.pages.item(0); var myTextFrame = myPage.textFrames.item(0); //Add four footnotes at random locations in the story. for(myCounter = 0; myCounter < 4; myCounter ++){ myWord = myTextFrame.parentStory.words.item(myGetRandom(0, myTextFrame.parentStory.words.length)); var myFootnote = myWord.insertionPoints.item(-1).footnotes.add(); //Note: when you create a footnote, it contains text--the footnote marker //and the separator text (if any). If you try to set the text of the footnote //by setting the footnote contents, you will delete the marker. Instead, append //the footnote text, as shown below. myFootnote.insertionPoints.item(-1).contents = "This is a footnote."; }

CHAPTER 5: Text and Type

Setting text preferences

The following script shows how to set general text preferences (for the complete script, see TextPreferences):
//The following sets the text preferences for the application; to set the //text preferences for the front-most document, replace "app.textPreferences" with //"app.documents.item(0).textPreferences" with(app.textPreferences){ abutTextToTextWrap = true; //baseline shift key increment can range from .001 to 200 points. baselineShiftKeyIncrement = 1; highlightCustomSpacing = false; highlightHjViolations = true; highlightKeeps = true; highlightSubstitutedFonts = true; highlightSubstitutedGlyphs = true; justifyTextWraps = true; //kerning key increment value is 1/1000 of an em. kerningKeyIncrement = 10; //leading key increment value can range from .001 to 200 points. leadingKeyIncrement= 1; linkTextFilesWhenImporting = false; scalingAdjustsText = false; showInvisibles = true; smallCap = 60; subscriptPosition = 30; subscriptSize = 60; superscriptPosition = 30; superscriptSize = 60; typographersQuotes = false; useOpticalSize = false; useParagraphLeading = false; zOrderTextWrap = false; } //Text editing preferences are application-wide. with(app.textEditingPreferences){ allowDragAndDropTextInStory = true; dragAndDropTextInLayout = true; smartCutAndPaste = true; tripleClickSelectsLine = false; }

User Interfaces
JavaScript can create dialogs for simple yes/no questions and text entry, but you probably will need to create more complex dialogs for your scripts. InDesign scripting can add dialogs and populate them with common user-interface controls, like pop-up lists, text-entry fields, and numeric-entry fields. If you want your script to collect and act on information entered by you or any other user of your script, use the dialog object. This chapter shows how to work with InDesign dialog scripting. The sample scripts in this chapter are presented in order of complexity, starting with very simple scripts and building toward more complex operations. NOTE: InDesign scripts written in JavaScript also can include user interfaces created using the Adobe ScriptUI component. This chapter includes some ScriptUI scripting tutorials; for more information, see Adobe Creative Suite 4 JavaScript Tools Guide. We assume you already read Adobe InDesign CS4 Scripting Tutorial and know how to create and run a script.

Dialog overview
An InDesign dialog box is an object like any other InDesign scripting object. The dialog box can contain several different types of elements (known collectively as widgets), as shown in the following figure. The elements of the figure are described in the table following the figure.
dialog

dialog column

static text border panel checkbox control radiobutton group radiobutton control

measurement editbox

dropdown

100

CHAPTER 6: User Interfaces

Your first InDesign dialog

101

Dialog box element Text-edit fields Numeric-entry fields Pop-up menus Control that combines a text-edit field with a pop-up menu Check box Radio buttons

InDesign name Text editbox control Real editbox, integer editbox, measurement editbox, percent editbox, angle editbox Drop-down control Combo-box control Check-box control Radio-button control

The dialog object itself does not directly contain the controls; that is the purpose of the dialogColumn object. dialogColumns give you a way to control the positioning of controls within a dialog box. Inside dialogColumns, you can further subdivide the dialog box into other dialogColumns or borderPanels (both of which can, if necessary, contain more dialogColumns and borderPanels). Like any other InDesign scripting object, each part of a dialog box has its own properties. A checkboxControl, for example, has a property for its text (staticLabel) and another property for its state (checkedState). The dropdown control has a property (stringList) for setting the list of options that appears on the controls menu. To use a dialog box in your script, create the dialog object, populate it with various controls, display the dialog box, and then gather values from the dialog-box controls to use in your script. Dialog boxes remain in InDesigns memory until they are destroyed. This means you can keep a dialog box in memory and have data stored in its properties used by multiple scripts, but it also means the dialog boxes take up memory and should be disposed of when they are not in use. In general, you should destroy a dialog-box object before your script finishes executing.

Your first InDesign dialog

The process of creating an InDesign dialog is very simple: add a dialog, add a dialog column to the dialog, and add controls to the dialog column. The following script demonstrates the process (for the complete script, see SimpleDialog):
var myDialog = app.dialogs.add({name:"Simple Dialog"}); //Add a dialog column. with(myDialog.dialogColumns.add()){ staticTexts.add({staticLabel:"This is a very simple dialog box."}); } //Show the dialog box. var myResult = myDialog.show(); //If the user clicked OK, display one message; //if they clicked Cancel, display a different message. if(myResult == true){ alert("You clicked the OK button."); } else{ alert("You clicked the Cancel button."); } //Remove the dialog box from memory. myDialog.destroy();

CHAPTER 6: User Interfaces

Adding a user interface to Hello World

102

Adding a user interface to Hello World

In this example, we add a simple user interface to the Hello World tutorial script presented in Adobe InDesign CS4 Scripting Tutorial. The options in the dialog box provide a way for you to specify the sample text and change the point size of the text:
var myDialog = app.dialogs.add({name:"Simple User Interface Example Script",canCancel:true}); with(myDialog){ //Add a dialog column. with(dialogColumns.add()){ //Create a text edit field. var myTextEditField = textEditboxes.add({editContents:"Hello World!", minWidth:180}); //Create a number (real) entry field. var myPointSizeField = measurementEditboxes.add({editValue:72, editUnits:MeasurementUnits.points}); } } //Display the dialog box. var myResult = myDialog.show(); if(myResult == true){ //Get the values from the dialog box controls. var myString = myTextEditField.editContents; var myPointSize = myPointSizeField.editValue; //Remove the dialog box from memory. myDialog.destroy(); myMakeDocument(myString, myPointSize); } else{ myDialog.destroy(); }

Here is the myMakeDocument function referred to in the above fragment:

function myMakeDocument(myString, myPointSize){ //Create a new document. var myDocument = app.documents.add() with(myDocument){ //Create a text frame. var myTextFrame = pages.item(0).textFrames.add(); //Resize the text frame to the "live" area of the page //(using the function "myGetBounds"). var myBounds = myGetBounds(myDocument, myDocument.pages.item(0)); myTextFrame.geometricBounds=myBounds; //Enter the text from the dialog box in the text frame. myTextFrame.contents=myString; //Set the size of the text to the size you entered in the dialog box. myTextFrame.texts.item(0).pointSize = myPointSize; } }

Creating a more complex user interface

Here is the myMakeDocument function referred to in the above fragment:

Working with ScriptUI

JavaScripts can make create and define user-interface elements using an Adobe scripting component named ScriptUI. ScriptUI gives scripters a way to create floating palettes, progress bars, and interactive dialog boxes that are far more complex than InDesigns built-in dialog object. This does not mean, however, that user-interface elements written using Script UI are not accessible to users. InDesign scripts can execute scripts written in other scripting languages using the method.

Creating a progress bar with ScriptUI

The following sample script shows how to create a progress bar using JavaScript and ScriptUI, then use the progress bar from another script (for the complete script, see ProgressBar):

CHAPTER 6: User Interfaces

Working with ScriptUI

106

#targetengine "session" //Because these terms are defined in the "session" engine, //they will be available to any other JavaScript running //in that instance of the engine. var myMaximumValue = 300; var myProgressBarWidth = 300; var myIncrement = myMaximumValue/myProgressBarWidth; myCreateProgressPanel(myMaximumValue, myProgressBarWidth); function myCreateProgressPanel(myMaximumValue, myProgressBarWidth){ myProgressPanel = new Window('window', 'Progress'); with(myProgressPanel){ myProgressPanel.myProgressBar = add('progressbar', [12, 12, myProgressBarWidth, 24], 0, myMaximumValue); } }

The following script fragment shows how to call the progress bar created in the above script using a separate JavaScript (for the complete script, see CallProgressBar):
Rem Create a document and add pages to it-Rem if you do not do this, the progress bar Rem will go by too quickly. Set myDocument = myInDesign.Documents.Add Rem Note that the JavaScripts must use the "session" Rem engine for this to work. myString = "#targetengine ""session""" & vbCr myString = myString & "myCreateProgressPanel(100, 400);" & vbcr myString = myString & "myProgressPanel.show();" & vbcr myInDesign.DoScript myString, idScriptLanguage.idJavascript For myCounter = 1 to 100 Rem Add a page to the document. myInDesign.Documents.Item(1).Pages.Add myString = "#targetengine ""session""" & vbCr myString = myString & "myProgressPanel.myProgressBar.value = " myString = myString & cstr(myCounter) & "/myIncrement;" & vbcr myInDesign.DoScript myString, idScriptLanguage.idJavascript If(myCounter = 100) Then myString = "#targetengine ""session""" & vbCr myString = myString & "myProgressPanel.myProgressBar.value = 0;" & vbcr myString = myString & "myProgressPanel.hide();" & vbcr myInDesign.DoScript myString, idScriptLanguage.idJavascript myDocument.Close idSaveOptions.idNo End If Next

Events
InDesign scripting can respond to common application and document events, like opening a file, creating a new file, printing, and importing text and graphic files from disk. In InDesign scripting, the event object responds to an event that occurs in the application. Scripts can be attached to events using the eventListener scripting object. Scripts that use events are the same as other scriptsthe only difference is that they run automatically, as the corresponding event occurs, rather than being run by the user (from the Scripts palette). This chapter shows how to work with InDesign event scripting. The sample scripts in this chapter are presented in order of complexity, starting with very simple scripts and building toward more complex operations. We assume you already read Adobe InDesign CS4 Scripting Tutorial and know how to create, install, and run a script. This chapter covers application and document events. For a discussion of events related to menus, see Chapter 8, Menus. The InDesign event scripting model is similar to the Worldwide Web Consortium (W3C) recommendation for Document Object Model Events. For more information, see http://www.w3c.org.

Understanding the event-scripting model

The InDesign event-scripting model is made up of a series of objects that correspond to the events that occur as you work with the application. The first object is the event, which corresponds to one of a limited series of actions in the InDesign user interface (or corresponding actions triggered by scripts). To respond to an event, you register an eventListener with an object capable of receiving the event. When the specified event reaches the object, the eventListener executes the script function defined in its handler function (which can be either a script function or a reference to a script file on disk). The following table lists events to which eventListeners can respond. These events can be triggered by any available means, including menu selections, keyboard shortcuts, or script actions.

107

CHAPTER 7: Events

Understanding the event-scripting model

108

User-interface event Any menu action

Event name
beforeDisplay

Description Appears before the menu or submenu is displayed. Appears before the script menu action is displayed or changed. Appears after the menu action is chosen but before the content of the menu action is executed. Appears after the menu action is executed. Executes the menu action or script menu action. Appears after a close-document request is made but before the document is closed. Appears after a document is closed. Appears after an export request is made but before the document or page item is exported. Appears after a document or page item is exported. Appears before a file is imported but before the incoming file is imported into a document (before place). Appears after a file is imported but before the file is placed on a page. Appears after a new-document request is made but before the document is created. Appears after a new document is created. Appears after an open-document request is made but before the document is opened. Appears after a document is opened. Appears after a print-document request is made but before the document is printed. Appears after a document is printed.

Object type Event Event Event

beforeDisplay

beforeInvoke

afterInvoke

Event Event DocumentEvent

onInvoke

beforeClose

afterClose

DocumentEvent ImportExportEvent

Export

beforeExport

afterExport

ImportExportEvent ImportExportEvent

Import

beforeImport

afterImport

ImportExportEvent DocumentEvent

New

beforeNew

afterNew

DocumentEvent DocumentEvent

Open

beforeOpen

afterOpen

DocumentEvent DocumentEvent

beforePrint

afterPrint

DocumentEvent

CHAPTER 7: Events

Understanding the event-scripting model

109

User-interface event Revert

Event name
beforeRevert

Description Appears after a document-revert request is made but before the document is reverted to an earlier saved state. Appears after a document is reverted to an earlier saved state. Appears after a save-document request is made but before the document is saved. Appears after a document is saved. Appears after a document save-a-copy-as request is made but before the document is saved. Appears after a document is saved. Appears after a document save-as request is made but before the document is saved. Appears after a document is saved.

Object type DocumentEvent

afterRevert

DocumentEvent DocumentEvent

Save

beforeSave

afterSave

DocumentEvent DocumentEvent

Save A Copy

beforeSaveACopy

afterSaveACopy

DocumentEvent DocumentEvent

Save As

beforeSaveAs

afterSaveAs

DocumentEvent

About event properties and event propagation

When an actionwhether initiated by a user or by a scripttriggers an event, the event can spread, or propagate, through the scripting objects capable of responding to the event. When an event reaches an object that has an eventListener registered for that event, the eventListener is triggered by the event. An event can be handled by more than one object as it propagates. There are three types of event propagation:

None Only the eventListeners registered to the event target are triggered by the event. The beforeDisplay event is an example of an event that does not propagate. Capturing The event starts at the top of the scripting object modelthe applicationthen propagates through the model to the target of the event. Any eventListeners capable of responding to the event registered to objects above the target will process the event. Bubbling The event starts propagation at its target and triggers any qualifying eventListeners registered to the target. The event then proceeds upward through the scripting object model, triggering any qualifying eventListeners registered to objects above the target in the scripting object model hierarchy.

The following table provides more detail on the properties of an event and the ways in which they relate to event propagation through the scripting object model.

CHAPTER 7: Events

Working with eventListeners

110

Property
Bubbles

Description If true, the event propagates to scripting objects above the object initiating the event. If true, the default behavior of the event on its target can be canceled. To do this, use the PreventDefault method . If true, the event may be handled by eventListeners registered to scripting objects above the target object of the event during the capturing phase of event propagation. This means an eventListener on the application, for example, can respond to a document event before an eventListener is triggered. The current scripting object processing the event. See target in this table. If true, the default behavior of the event on the current target was prevented, thereby cancelling the action. See target in this table. The current stage of the event propagation process. The type of the event, as a string (for example, "beforeNew"). If true, the event has stopped propagating beyond the current target (see target in this table). To stop event propagation, use the stopPropagation method . The object from which the event originates. For example, the target of a beforeImport event is a document; of a beforeNew event, the application. The time and date the event occurred.

Cancelable

Captures

CurrentTarget DefaultPrevented

EventPhase EventType PropagationStopped

Target

TimeStamp

Working with eventListeners

When you create an eventListener, you specify the event type (as a string) the event handler (as a JavaScript function or file reference), and whether the eventListener can be triggered in the capturing phase of the event. The following script fragment shows how to add an eventListener for a specific event (for the complete script, see AddEventListener).
main(); function main(){ var myEventListener = app.addEventListener("afterNew", myDisplayEventType, false); } function myDisplayEventType(myEvent){ alert("This event is the " + myEvent.eventType + " event."); }

To remove the eventListener created by the above script, run the following script (from the RemoveEventListener tutorial script):
app.removeEventListener("afterNew", myDisplayEventType, false);

When an eventListener responds an event, the event may still be processed by other eventListeners that might be monitoring the event (depending on the propagation of the event). For example, the afterOpen event can be observed by eventListeners associated with both the application and the document.

CHAPTER 7: Events

Working with eventListeners

111

eventListeners do not persist beyond the current InDesign session. To make an eventListener

available in every InDesign session, add the script to the startup scripts folder (for more on installing scripts, see "Installing Scripts" in Adobe CS4 InDesign Scripting Tutorial). When you add an eventListener script to a document, it is not saved with the document or exported to INX. NOTE: If you are having trouble with a script that defines an eventListener, you can either run a script that removes the eventListener or quit and restart InDesign.
eventListeners that use handler functions defined inside the script (rather than in an external file) must use #targetengine "session". If the script is run using #targetengine "main" (the default), the function is not available when the event occurs, and the script generates an error.

An event can trigger multiple eventListeners as it propagates through the scripting object model. The following sample script demonstrates an event triggering eventListeners registered to different objects (for the full script, see MultipleEventListeners):
#targetengine "session" main(); function main(){ var myApplicationEventListener = app.eventListeners.add("beforeImport", myEventInfo, false); var myDocumentEventListener = app.documents.item(0).eventListeners.add ("beforeImport", myEventInfo, false); } function myEventInfo(myEvent){ var myString = "Current Target: " + myEvent.currentTarget.name; alert(myString); }

When you run the above script and place a file, InDesign displays alerts showing, in sequence, the name of the document, then the name of the application. The following sample script creates an eventListener for each supported event and displays information about the event in a simple dialog box. For the complete script, see EventListenersOn.
main() function main(){ app.scriptPreferences.version = 5.0; var myEventNames = [ "beforeQuit", "afterQuit", "beforeNew", "afterNew", "beforeOpen", "afterOpen", "beforeClose", "afterClose", "beforeSave", "afterSave", "beforeSaveAs", "afterSaveAs", "beforeSaveACopy", "afterSaveACopy", "beforeRevert", "afterRevert", "beforePrint", "afterPrint", "beforeExport", "afterExport", "beforeImport", "afterImport" ] ; for (var myCounter = 0; myCounter < myEventNames.length; myCounter ++){ app.addEventListener(myEventNames[myCounter], myEventInfo, false); } }

CHAPTER 7: Events

An example afterNew eventListener

112

The following sample script shows how to turn all eventListeners on the application object off. For the complete script, see EventListenersOff.
#targetengine "session" app.eventListeners.everyItem().remove();

An example afterNew eventListener

The afterNew event provides a convenient place to add information to the document, like the user name, the date the document was created, copyright information, and other job-tracking information. The following tutorial script shows how to add this sort of information to a text frame in the slug area of the first master spread in the document (for the complete script, see AfterNew). This script also adds document metadata (also known as file info or XMP information).

CHAPTER 7: Events

An example afterNew eventListener

113

#targetengine "session" //Creates an event listener that will run after a new document is created. main(); function main(){ var myEventListener = app.eventListeners.add("afterNew", myAfterNewHandler, false); } function myAfterNewHandler(myEvent){ var myDocument = myEvent.parent; myDocument.viewPreferences.horizontalMeasurementUnits = MeasurementUnits.points; myDocument.viewPreferences.verticalMeasurementUnits = MeasurementUnits.points; myDocument.viewPreferences.rulerOrigin = RulerOrigin.pageOrigin; myCreateSlug(myDocument); myAddXMPData(myDocument); function myCreateSlug(myDocument){ //mySlugOffset is the distance from the bottom of the page to //the top of the slug. var mySlugOffset = 24; //mySlugHeight is the height of the slug text frame. var mySlugHeight = 72; with(myDocument.documentPreferences){ slugBottomOffset = mySlugOffset + mySlugHeight; slugTopOffset = 0; slugInsideOrLeftOffset = 0; slugRightOrOutsideOffset = 0; } for(var myCounter = 0; myCounter < myDocument.masterSpreads.length; myCounter++){ var myMasterSpread = myDocument.masterSpreads.item(myCounter); for(var myMasterPageCounter = 0; myMasterPageCounter < myMasterSpread.pages.length; myMasterPageCounter ++){ var myPage = myMasterSpread.pages.item(myMasterPageCounter); var mySlugBounds = myGetSlugBounds(myDocument, myPage, mySlugOffset, mySlugHeight); var mySlugFrame = myPage.textFrames.add( {geometricBounds:mySlugBounds, contents:"Created: " + myEvent.timeStamp + "\rby: " + app.userName}); } } } function myAddXMPData(myDocument){ with(myDocument.metadataPreferences){ author = "Adobe Systems"; description = "This is a sample document with XMP metadata."; } } function myGetSlugBounds(myDocument, myPage, mySlugOffset, mySlugHeight){ var myPageWidth = myDocument.documentPreferences.pageWidth; var myPageHeight = myDocument.documentPreferences.pageHeight //Because "right" and "left" margins become "inside" and "outside" //for pages in a facing pages view, we have to use a special case for //left hand pages. if(myPage.side == PageSideOptions.leftHand){ var myX2 = myPageWidth - myPage.marginPreferences.left; var myX1 = myPage.marginPreferences.right; }

CHAPTER 7: Events

Sample beforePrint eventListener

114

else{ var myX1 = myPage.marginPreferences.left; var myX2 = myPageWidth - myPage.marginPreferences.right; } var myY1 = myPageHeight + mySlugOffset; var myY2 = myY1 + mySlugHeight; return [myY1, myX1, myY2, myX2]; } }

Sample beforePrint eventListener

The beforePrint event provides a perfect place to execute a script that performs various preflight checks on a document. The following script shows how to add an eventListener that checks a document for certain attributes before printing (for the complete script, see BeforePrint):
#targetengine "session" //Adds an event listener that performs a preflight check on a document //before printing. If the preflight check fails, the script cancels //the print job. main(); function main(){ var myEventListener = app.eventListeners.add("beforePrint", myBeforePrintHandler, false); } function myBeforePrintHandler(myEvent){ //The parent of the event is the document. var myDocument = myEvent.parent; if(myPreflight(myDocument) == false){ myEvent.stopPropagation(); myEvent.preventDefault(); alert("Document did not pass preflight check."); } else{alert("Document passed preflight check. Ready to print.");} function myPreflight(myDocument){ var myPreflightCheck = true; var myFontCheck = myCheckFonts(myDocument); var myGraphicsCheck = myCheckGraphics(myDocument); alert("Fonts: " + myFontCheck + "\r" + "Links:" + myGraphicsCheck); if((myFontCheck == false)||(myGraphicsCheck == false)){ myPreflightCheck = false; } return myPreflightCheck; } function myCheckFonts(myDocument){ var myFontCheck = true; for(var myCounter = 0; myCounter < myDocument.fonts.length; myCounter ++){ if(myDocument.fonts.item(myCounter).status != FontStatus.installed){ myFontCheck = false; } } return myFontCheck; }

CHAPTER 7: Events

Sample beforePrint eventListener

115

Menus
InDesign scripting can add menu items, remove menu items, perform any menu command, and attach scripts to menu items. This chapter shows how to work with InDesign menu scripting. The sample scripts in this chapter are presented in order of complexity, starting with very simple scripts and building toward more complex operations. We assume you already read Adobe InDesign CS4 Scripting Tutorial and know how to create, install, and run a script.

Understanding the menu model

The InDesign menu-scripting model is made up of a series of objects that correspond to the menus you see in the applications user interface, including menus associated with panels as well as those displayed on the main menu bar. A menu object contains the following objects:
menuItems The menu options shown on a menu. This does not include submenus. menuSeparators Lines used to separate menu options on a menu. submenus Menu options that contain further menu choices. menuElements All menuItems, menuSeparators and submenus shown on a menu. eventListeners These respond to user (or script) actions related to a menu. events The events triggered by a menu.

Every menuItem is connected to a menuAction through the associatedMenuAction property. The properties of the menuAction define what happens when the menu item is chosen. In addition to the menuActions defined by the user interface, InDesign scripters can create their own, scriptMenuActions, which associate a script with a menu selection. A menuAction or scriptMenuAction can be connected to zero, one, or more menuItems. The following diagram shows how the different menu objects relate to each other:

116

CHAPTER 8: Menus

Understanding the menu model

117

application menuActions menuAction area checked enabled eventListeners id index label name events parent title scriptMenuActions scriptMenuAction same as menuAction event event ... eventListener eventListener ...

To create a list (as a text file) of all menu actions, run the following script fragment (from the GetMenuActions tutorial script):
var myMenuActionNames = app.menuActions.everyItem().name; //Open a new text file. var myTextFile = File.saveDialog("Save Menu Action Names As", undefined); //If the user clicked the Cancel button, the result is null. if(myTextFile != null){ //Open the file with write access. myTextFile.open("w"); for(var myCounter = 0; myCounter < myMenuActionNames.length; myCounter++){ myTextFile.writeln(myMenuActionNames[myCounter]); } myTextFile.close(); }

120

var myMainMenu = app.menus.item("Main"); var myTypeMenu = myMainMenu.menuElements.item("Type"); var myFontMenu = myTypeMenu.menuElements.item("Font"); var myKozukaMenu = myFontMenu.submenus.item("Kozuka Mincho Pro "); var mySpecialFontMenu = myMainMenu.submenus.add("Kozuka Mincho Pro"); for(myCounter = 0;myCounter < myKozukaMenu.menuItems.length; myCounter++){ var myAssociatedMenuAction = myKozukaMenu.menuItems.item(myCounter).associatedMenuAction; mySpecialFontMenu.menuItems.add(myAssociatedMenuAction); }

To remove the custom menu item created by the above script, use RemoveCustomMenu.
var myMainMenu = app.menus.item("$ID/Main"); try{ var mySpecialFontMenu = myMainMenu.submenus.item("Kozuka Mincho Pro"); mySpecialFontMenu.remove(); }catch(myError){}

Menus and events

Menus and submenus generate events as they are chosen in the user interface, and menuActions and scriptMenuActions generate events as they are used. Scripts can install eventListeners to respond to these events. The following table shows the events for the different menu scripting components: Object
menu

Event
beforeDisplay

Description Runs the attached script before the contents of the menu is shown. Runs the attached script when the associated menuItem is selected, but after the onInvoke event. Runs the attached script when the associated menuItem is selected, but before the onInvoke event. Runs the attached script when the associated menuItem is selected, but after the onInvoke event. Runs the attached script when the associated menuItem is selected, but before the onInvoke event. Runs the attached script before an internal request for the enabled/checked status of the scriptMenuActionscriptMenuAction. Runs the attached script when the scriptMenuAction is invoked. Runs the attached script before the contents of the submenu are shown.

menuAction

afterInvoke

beforeInvoke

scriptMenuAction

afterInvoke

beforeInvoke

beforeDisplay

onInvoke

submenu

beforeDisplay

For more about events and eventListeners, see Chapter 7, Events. To change the items displayed in a menu, add an eventListener for the beforeDisplay event. When the menu is selected, the eventListener can then run a script that enables or disables menu items, changes

CHAPTER 8: Menus

Working with scriptMenuActions

121

the wording of menu item, or performs other tasks related to the menu. This mechanism is used internally to change the menu listing of available fonts, recent documents, or open windows.

Working with scriptMenuActions

You can use scriptMenuAction to create a new menuAction whose behavior is implemented through the script registered to run when the onInvoke event is triggered. The following script shows how to create a scriptMenuAction and attach it to a menu item (for the complete script, see MakeScriptMenuAction). This script simply displays an alert when the menu item is selected.
var mySampleScriptAction = app.scriptMenuActions.add("Display Message"); var myEventListener = mySampleScriptAction.eventListeners.add("onInvoke", function(){alert("This menu item was added by a script.");}); //If the submenu "Script Menu Action" does not already exist, create it. try{ var mySampleScriptMenu = app.menus.item("$ID/Main").submenus.item( "Script Menu Action"); mySampleScriptMenu.title; } catch (myError){ var mySampleScriptMenu = app.menus.item("$ID/Main").submenus.add ("Script Menu Action"); } var mySampleScriptMenuItem = mySampleScriptMenu.menuItems.add(mySampleScriptAction);

To remove the menu, submenu, menuItem, and scriptMenuAction created by the above script, run the following script fragment (from the RemoveScriptMenuAction tutorial script):
#targetengine "session" var mySampleScriptAction = app.scriptMenuActions.item("Display Message"); mySampleScriptAction.remove(); var mySampleScriptMenu = app.menus.item("$ID/Main").submenus.item ("Script Menu Action"); mySampleScriptMenu.remove();

You also can remove all scriptMenuAction, as shown in the following script fragment (from the RemoveAllScriptMenuActions tutorial script). This script also removes the menu listings of the scriptMenuAction, but it does not delete any menus or submenus you might have created.
#targetengine "session" app.scriptMenuActions.everyItem().remove();

You can create a list of all current scriptMenuActions, as shown in the following script fragment (from the ListScriptMenuActions tutorial script):

CHAPTER 8: Menus

A more complex menu-scripting example

122

var myScriptMenuActionNames = app.scriptMenuActions.everyItem().name; //Open a new text file. var myTextFile = File.saveDialog("Save Script Menu Action Names As", undefined); //If the user clicked the Cancel button, the result is null. if(myTextFile != null){ //Open the file with write access. myTextFile.open("w"); for(var myCounter = 0; myCounter < myScriptMenuActionNames.length; myCounter++){ myTextFile.writeln(myScriptMenuActionNames[myCounter]); } myTextFile.close(); } scriptMenuAction also can run scripts during their beforeDisplay event, in which case they are executed before an internal request for the state of the scriptMenuAction (e.g., when the menu item is

about to be displayed). Among other things, the script can then change the menu names and/or set the enabled/checked status. In the following sample script, we add an eventListener to the beforeDisplay event that checks the current selection. If there is no selection, the script in the eventListener disables the menu item. If an item is selected, the menu item is enabled, and choosing the menu item displays the type of the first item in the selection. (For the complete script, see BeforeDisplay.)
var mySampleScriptAction = app.scriptMenuActions.add("Display Message"); var myEventListener = mySampleScriptAction.eventListeners.add("onInvoke", function() { //JavaScript function to run when the menu item is selected. myString = app.selection[0].constructor.name; alert("The first item in the selection is a " + myString + "."); }); var mySampleScriptMenu = app.menus.item("$ID/Main").submenus.add("Script Menu Action"); var mySampleScriptMenuItem = mySampleScriptMenu.menuItems.add(mySampleScriptAction); mySampleScriptMenu.eventListeners.add("beforeDisplay", function() { //JavaScript function to run before the menu item is drawns. var mySampleScriptAction = app.scriptMenuActions.item("Display Message"); if(app.selection.length > 0){ mySampleScriptAction.enabled = true; } else{ mySampleScriptAction.enabled = false; } });

A more complex menu-scripting example

You have probably noticed that selecting different items in the InDesign user interface changes the contents of the context menus. The following sample script shows how to modify the context menu based on the properties of the object you select. Fragments of the script are shown below; for the complete script, see LayoutContextMenu. The following snippet shows how to create a new menu item on the Layout context menu (the context menu that appears when you have a page item selected). The following snippet adds a beforeDisplay eventListener which checks for the existence of a menuItem and removes it if it already exists. We do this to ensure the menuItem does not appear on the context menu when the selection does not contain a

CHAPTER 8: Menus

A more complex menu-scripting example

123

graphic, and to avoid adding multiple menu choices to the context menu. The eventListener then checks the selection to see if it contains a graphic; if so, it creates a new scriptMenuItem.
//The locale-independent name (aka "key string") for the //Layout context menu is "$ID/RtMouseLayout". var myLayoutContextMenu = app.menus.item("$ID/RtMouseLayout"); //Create the event handler for the "beforeDisplay" //event of the Layout context menu. var myBeforeDisplayListener = myLayoutContextMenu.addEventListener ("beforeDisplay", myBeforeDisplayHandler, false); //This event handler checks the type of the selection. //If a graphic is selected, the event handler adds the script menu //action to the menu. function myBeforeDisplayHandler(myEvent){ if(app.documents.length != 0){ if(app.selection.length > 0){ var myObjectList = new Array; //Does the selection contain any graphics? for(var myCounter = 0; myCounter < app.selection.length; myCounter ++){ switch(app.selection[myCounter].constructor.name){ case "PDF": case "EPS": case "Image": myObjectList.push(app.selection[myCounter]); break; case "Rectangle": case "Oval": case "Polygon": if(app.selection[myCounter].graphics.length != 0){ myObjectList.push(app.selection[myCounter]. graphics.item(0)); } break; default: } } if(myObjectList.length > 0){ //Add the menu item if it does not already exist. if(myCheckForMenuItem(myLayoutContextMenu, "Create Graphic Label") == false){ myMakeLabelGraphicMenuItem(); } } else{ //Remove the menu item, if it exists. if(myCheckForMenuItem(myLayoutContextMenu, "Create Graphic Label") == true){ myLayoutContextMenu.menuItems.item("Create Graphic Label").remove(); } } } }

CHAPTER 8: Menus

127

myDialog.destroy(); var myOldXUnits = app.documents.item(0).viewPreferences. horizontalMeasurementUnits; var myOldYUnits = app.documents.item(0).viewPreferences. verticalMeasurementUnits; app.documents.item(0).viewPreferences. horizontalMeasurementUnits = MeasurementUnits.points; app.documents.item(0).viewPreferences. verticalMeasurementUnits = MeasurementUnits.points; for(var myCounter = 0; myCounter < myObjectList.length; myCounter++){ var myGraphic = myObjectList[myCounter]; myAddLabel(myGraphic, myLabelType, myLabelHeight, myLabelOffset, myLabelStyle, myLayerName); } app.documents.item(0).viewPreferences. horizontalMeasurementUnits = myOldXUnits; app.documents.item(0).viewPreferences. verticalMeasurementUnits = myOldYUnits; } else{ myDialog.destroy(); } } } } }

XML
Extensible Markup Language, or XML, is a text-based mark-up system created and managed by the World Wide Web Consortium (www.w3.org). Like Hypertext Markup Language (HTML), XML uses angle brackets to indicate markup tags (for example, <article> or <para>). While HTML has a predefined set of tags, XML allows you to describe content more precisely by creating custom tags. Because of its flexibility, XML increasingly is used as a format for storing data. InDesign includes a complete set of features for importing XML data into page layouts, and these features can be controlled using scripting. We assume you already read Adobe InDesign CS4 Scripting Tutorial and know how to create and run a script. We also assume you have some knowledge of XML, DTDs, and XSLT.

Overview
Because XML is entirely concerned with content and explicitly not concerned with formatting, making XML work in a page-layout context is challenging. InDesigns approach to XML is quite complete and flexible, but it has a few limitations:

Once XML elements are imported into an InDesign document, they become InDesign elements that correspond to the XML structure. The InDesign representations of the XML elements are not the same thing as the XML elements themselves. Each XML element can appear only once in a layout. If you want to duplicate the information of the XML element in the layout, you must duplicate the XML element itself. The order in which XML elements appear in a layout largely depends on the order in which they appear in the XML structure. Any text that appears in a story associated with an XML element becomes part of that elements data.

The best approach to scripting XML in InDesign?

You might want to do most of the work on an XML file outside InDesign, before you import the file into an InDesign layout. Working with XML outside InDesign, you can use a wide variety of excellent tools, such as XML editors and parsers. When you need to rearrange or duplicate elements in a large XML data structure, the best approach is to transform the XML using XSLT. You can do this as you import the XML file. If the XML data is already formatted in an InDesign document, you probably will want to use XML rules if you are doing more than the simplest of operations. XML rules can search the XML structure in a document and process matching XML elements much faster than a script that does not use XML rules. For more on working with XML rules, see Chapter 10, XML Rules."

128

CHAPTER 9: XML

Scripting XML elements

129

Scripting XML elements

This section shows how to set XML preferences and XML import preferences, import XML, create XML elements, and add XML attributes. The scripts in this section demonstrate techniques for working with the XML content itself; for scripts that apply formatting to XML elements, see Adding XML elements to a layout on page 134.

Setting XML preferences

You can control the appearance of the InDesign structure panel using the XML view-preferences object, as shown in the following script fragment (from the XMLViewPreferences tutorial script):
var myDocument = app.documents.add(); var myXMLViewPreferences = myDocument.xmlViewPreferences; myXMLViewPreferences.showAttributes = true; myXMLViewPreferences.showStructure = true; myXMLViewPreferences.showTaggedFrames = true; myXMLViewPreferences.showTagMarkers = true; myXMLViewPreferences.showTextSnippets = true;

You also can specify XML tagging preset preferences (the default tag names and user-interface colors for tables and stories) using the XML preferences object., as shown in the following script fragment (from the XMLPreferences tutorial script):
var myDocument = app.documents.add(); var myXMLPreferences = myDocument.xmlPreferences; myXMLPreferences.defaultCellTagColor = UIColors.blue; myXMLPreferences.defaultCellTagName = "cell"; myXMLPreferences.defaultImageTagColor = UIColors.brickRed; myXMLPreferences.defaultImageTagName = "image"; myXMLPreferences.defaultStoryTagColor = UIColors.charcoal; myXMLPreferences.defaultStoryTagName = "text"; myXMLPreferences.defaultTableTagColor = UIColors.cuteTeal; myXMLPreferences.defaultTableTagName = "table";

Setting XML import preferences

Before importing an XML file, you can set XML import preferences that can apply an XSLT transform, govern the way white space in the XML file is handled, or create repeating text elements. You do this using the XML import-preferences object, as shown in the following script fragment (from the XMLImportPreferences tutorial script):

CHAPTER 9: XML

Scripting XML elements

130

var myDocument = app.documents.add(); var myXMLImportPreferences = myDocument.xmlImportPreferences; myXMLImportPreferences.allowTransform = false; myXMLImportPreferences.createLinkToXML = false; myXMLImportPreferences.ignoreUnmatchedIncoming = true; myXMLImportPreferences.ignoreWhitespace = true; myXMLImportPreferences.importCALSTables = true; myXMLImportPreferences.importStyle = XMLImportStyles.mergeImport; myXMLImportPreferences.importTextIntoTables = false; myXMLImportPreferences.importToSelected = false; myXMLImportPreferences.removeUnmatchedExisting = false; myXMLImportPreferences.repeatTextElements = true; //The following properties are only used when the //AllowTransform property is set to True. //myXMLImportPreferences.transformFilename = "c:\myTransform.xsl" //If you have defined parameters in your XSL file, then you can pass //parameters to the file during the XML import process. For each parameter, //enter an array containing two strings. The first string is the name of the //parameter, the second is the value of the parameter. //myXMLImportPreferences.transformParameters = [["format", "1"]];

Importing XML
Once you set the XML import preferences the way you want them, you can import an XML file, as shown in the following script fragment (from the ImportXML tutorial script):
myDocument.importXML(File("/c/xml_test.xml"));

When you need to import the contents of an XML file into a specific XML element, use the importXML method of the XML element, rather than the corresponding method of the document. See the following script fragment (from the ImportXMLIntoElement tutorial script):
myXMLElement.importXML(File("/c/xml_test.xml"));

You also can set the importToSelected property of the xmlImportPreferences object to true, then select the XML element, and then import the XML file, as shown in the following script fragment (from the ImportXMLIntoSelectedElement tutorial script):
var myXMLTag = myDocument.xmlTags.add("xml_element"); var myXMLElement = myDocument.xmlElements.item(0).xmlElements.add(myXMLTag); myDocument.select(myXMLElement); myDocument.xmlImportPreferences.importToSelected = true; //Import into the selected XML element. myDocument.importXML(File("/c/xml_test.xml"));

Creating an XML tag

XML tags are the names of the XML elements you want to create in a document. When you import XML, the element names in the XML file are added to the list of XML tags in the document. You also can create XML tags directly, as shown in the following script fragment (from the MakeXMLTags tutorial script):
//You can create an XML tag without specifying a color for the tag. var myXMLTagA = myDocument.xmlTags.add("XML_tag_A"); //You can define the highlight color of the XML tag using the UIColors enumeration... var myXMLTagB = myDocument.xmlTags.add("XML_tag_B", UIColors.gray); //...or you can provide an RGB array to set the color of the tag. var myXMLTagC = myDocument.xmlTags.add("XML_tag_C", [0, 92, 128]);

CHAPTER 9: XML

Scripting XML elements

131

Loading XML tags

You can import XML tags from an XML file without importing the XML contents of the file. You might want to do this to work out a tag-to-style or style-to-tag mapping before you import the XML data., as shown in the following script fragment (from the LoadXMLTags tutorial script):
myDocument.loadXMLTags(File("/c/test.xml"));

Saving XML tags

Just as you can load XML tags from a file, you can save XML tags to a file, as shown in the following script. When you do this, only the tags themselves are saved in the XML file; document data is not included. As you would expect, this process is much faster than exporting XML, and the resulting file is much smaller. The following sample script shows how to save XML tags (for the complete script, see SaveXMLTags):
myDocument.saveXMLTags(File("/c/xml_tags.xml"), "Tag set created October 5, 2006");

Creating an XML element

Ordinarily, you create XML elements by importing an XML file, but you also can create an XML element using InDesign scripting, as shown in the following script fragment (from the CreateXMLElement tutorial script):
var myDocument = myInDesign.documents.add(); var myXMLTagA = myDocument.xmlTags.add("XML_tag_A"); var myXMLElementA = myDocument.xmlElements.item(0).xmlElements.add(myXMLTagA); myXMLElementA.contents = "This is an XML element containing text.";

Moving an XML element

You can move XML elements within the XML structure using the move method, as shown in the following script fragment (from the MoveXMLElement tutorial script):
var myRootXMLElement = myDocument.xmlElements.item(0); var myXMLElementA = myRootXMLElement.xmlElements.item(0); myXMLElementA.move(LocationOptions.after, myRootXMLElement.xmlElements.item(2)); myRootXMLElement.xmlElements.item(-1).move(LocationOptions.atBeginning);

Deleting an XML element

Deleting an XML element removes it from both the layout and the XML structure, as shown in the following script fragment (from the DeleteXMLElement tutorial script).
myRootXMLElement.xmlElements.item(0).remove();

CHAPTER 9: XML

Scripting XML elements

132

Duplicating an XML element

When you duplicate an XML element, the new XML element appears immediately after the original XML element in the XML structure, as shown in the following script fragment (from the DuplicateXMLElement tutorial script):
var myDocument = app.documents.item(0); var myRootXMLElement = myDocument.xmlElements.item(0); //Duplicate the XML element containing "A" var myNewXMLElement = myRootXMLElement.xmlElements.item(0).duplicate(); //Change the content of the duplicated XML element. myNewXMLElement.contents = myNewXMLElement.contents + " duplicate";

Removing items from the XML structure

To break the association between a page item or text and an XML element, use the untag method, as shown in the following script. The objects are not deleted, but they are no longer tied to an XML element (which is deleted). Any content of the deleted XML element becomes associated with the parent XML element. If the XML element is the root XML element, any layout objects (text or page items) associated with the XML element remain in the document. (For the complete script, see UntagElement.)
var myXMLElement = myDocument.xmlElements.item(0).xmlElements.item(0); myXMLElement.untag();

Creating an XML comment

XML comments are used to make notes in XML data structures. You can add an XML comment using something like the following script fragment (from the MakeXMLComment tutorial script):
var myRootXMLElement = myDocument.xmlElements.item(0); var myXMLElementB = myRootXMLElement.xmlElements.item(1); myXMLElementB.xmlComments.add("This is an XML comment.");

Creating an XML processing instruction

A processing instruction (PI) is an XML element that contains directions for the application reading the XML document. XML processing instructions are ignored by InDesign but can be inserted in an InDesign XML structure for export to other applications. An XML document can contain multiple processing instructions. An XML processing instruction has two parts, target and value. The following is an example:
<?xml-stylesheet type="text/css" href="generic.css"?>

The following script fragment shows how to add an XML processing instruction (for the complete script, see MakeProcessingInstruction):
var myRootXMLElement = myDocument.xmlElements.item(0); var myXMLProcessingInstruction = myRootXMLElement.xmlInstructions.add("xml-stylesheet type=\"text/css\" ", "href=\"generic.css\"");

CHAPTER 9: XML

Scripting XML elements

133

Working with XML attributes

XML attributes are metadata that can be associated with an XML element. To add an XML attribute to an XML element, use something like the following script fragment (from the MakeXMLAttribute tutorial script). An XML element can have any number of XML attributes, but each attribute name must be unique within the element (that is, you cannot have two attributes named id).
var myDocument = app.documents.item(0); var myRootXMLElement = myDocument.xmlElements.item(0); var myXMLElementB = myRootXMLElement.xmlElements.item(1); myXMLElementB.xmlAttributes.add("example_attribute", "This is an XML attribute. It will not appear in the layout!");

In addition to creating attributes directly using scripting, you can convert XML elements to attributes. When you do this, the text contents of the XML element become the value of an XML attribute added to the parent of the XML element. Because the name of the XML element becomes the name of the attribute, this method can fail when an attribute with that name already exists in the parent of the XML element. If the XML element contains page items, those page items are deleted from the layout. When you convert an XML attribute to an XML element, you can specify the location where the new XML element is added. The new XML element can be added to the beginning or end of the parent of the XML attribute. By default, the new element is added at the beginning of the parent element. You also can specify am XML mark-up tag for the new XML element. If you omit this parameter, the new XML element is created with the same XML tag as XML element containing the XML attribute. The following script shows how to convert an XML element to an XML attribute (for the complete script, see ConvertElementToAttribute):
var myRootXMLElement = myDocument.xmlElements.item(0); myRootXMLElement.xmlElements.item(-1).convertToAttribute();

You also can convert an XML attribute to an XML element, as shown in the following script fragment (from the ConvertAttributeToElement tutorial script):
var myRootXMLElement = myDocument.xmlElements.item(0); var myXMLElementB = myRootXMLElement.xmlElements.item(1); //The "at" parameter can be either LocationOptions.atEnd or LocationOptions.atBeginning, but cannot //be LocationOptions.after or LocationOptions.before. myXMLElementB.xmlAttributes.item(0).convertToElement(LocationOptions.atEnd, myDocument.xmlTags.item("xml_element"));

Working with XML stories

When you import XML elements that were not associated with a layout element (a story or page item), they are stored in an XML story. You can work with text in unplaced XML elements just as you would work with the text in a text frame. The following script fragment shows how this works (for the complete script, see XMLStory):
var myXMLStory = myDocument.xmlStories.item(0); //Though the text has not yet been placed in the layout, all text //properties are available. myXMLStory.paragraphs.item(0).pointSize = 72; //Place the XML element in the layout to see the result. myDocument.xmlElements.item(0).xmlElements.item(0).placeXML(myDocument.pages.item(0). textFrames.item(0));

CHAPTER 9: XML

Adding XML elements to a layout

134

Exporting XML
To export XML from an InDesign document, export either the entire XML structure in the document or one XML element (including any child XML elements it contains). The following script fragment shows how to do this (for the complete script, see ExportXML):
//Export the entire XML structure in the document. myDocument.exportFile(ExportFormat.xml, File("/c/completeDocumentXML.xml")); //Export a specific XML element and its child XML elements. var myXMLElement = myDocument.xmlElements.item(0).xmlElements.item(-1); myXMLElement.exportFile(ExportFormat.xml, File("/c/partialDocumentXML.xml"));

In addition, you can use the exportFromSelected property of the xmlExportPreferences object to export an XML element selected in the user interface. The following script fragment shows how to do this (for the complete script, see ExportSelectedXMLElement):
myDocument.select(myDocument.xmlElements.item(0).xmlElements.item(1)); myDocument.xmlExportPreferences.exportFromSelected = true; //Export the entire XML structure in the document. myDocument.exportFile(ExportFormat.xml, File("/c/selectedXMLElement.xml")); myDocument.xmlExportPreferences.exportFromSelected = false;

Adding XML elements to a layout

Previously, we covered the process of getting XML data into InDesign documents and working with the XML structure in a document. In this section, we discuss techniques for getting XML information into a page layout and applying formatting to it.

Associating XML elements with page items and text

To associate a page item or text with an existing XML element, use the placeXML method. This replaces the content of the page item with the content of the XML element, as shown in the following script fragment (from the PlaceXML tutorial script):
myDocument.xmlElements.item(0).placeXML(myDocument.pages.item(0).textFrames.item(0));

To associate an existing page item or text object with an existing XML element, use the markup method. This merges the content of the page item or text with the content of the XML element (if any). The following script fragment shows how to use the markup method (for the complete script, see Markup):
myDocument.xmlElements.item(0).xmlElements.item(0).markup(myDocument.pages.item(0).te xtFrames.item(0));

CHAPTER 9: XML

Adding XML elements to a layout

135

Placing XML into page items

Another way to associate an XML element with a page item is to use the placeIntoFrame method. With this method, you can create a frame as you place the XML, as shown in the following script fragment (for the complete script, see PlaceIntoFrame):
myDocument.viewPreferences.horizontalMeasurementUnits = MeasurementUnits.points; myDocument.viewPreferences.verticalMeasurementUnits = MeasurementUnits.points; myDocument.viewPreferences.rulerOrigin = RulerOrigin.pageOrigin; //PlaceIntoFrame has two parameters: //On: The page, spread, or master spread on which to create the frame //GeometricBounds: The bounds of the new frame (in page coordinates). myDocument.xmlElements.item(0).xmlElements.item(0).placeIntoFrame(myDocument.pages.it em(0), [72, 72, 288, 288]);

To associate an XML element with an inline page item (i.e., an anchored object), use the placeIntoCopy method, as shown in the following script fragment (from the PlaceIntoCopy tutorial script):
var myPage = myDocument.pages.item(0); var myXMLElement = myDocument.xmlElements.item(0); myXMLElement.placeIntoCopy(myPage, [288, 72], myPage.textFrames.item(0), true);

To associate an existing page item (or a copy of an existing page item) with an XML element and insert the page item into the XML structure at the location of the element, use the placeIntoInlineCopy method, as shown in the following script fragment (from the PlaceIntoInlineCopy tutorial script):
var myPage = myDocument.pages.item(0); var myTextFrame = myDocument.textFrames.add({geometricBounds:[72, 72, 96, 144]}); var myXMLElement = myDocument.xmlElements.item(0).xmlElements.item(2); myXMLElement.placeIntoInlineCopy(myTextFrame, false);

To associate an XML element with a new inline frame, use the placeIntoInlineFrame method, as shown in the following script fragment (from the PlaceIntoInlineFrame tutorial script):
var myXMLElement = myDocument.xmlElements.item(0).xmlElements.item(2); //Specify width and height as you create the inline frame. myXMLElement.placeIntoInlineFrame([72, 24]);

Inserting text in and around XML text elements

When you place XML data into an InDesign layout, you often need to add white space (for example, return and tab characters) and static text (labels like name or address) to the text of your XML elements. The following sample script shows how to add text in and around XML elements (for the complete script, see InsertTextAsContent):

CHAPTER 9: XML

Adding XML elements to a layout

136

var myXMLElement = myDocument.xmlElements.item(0).xmlElements.item(0); //By inserting the return character after the XML element, the character //becomes part of the content of the parent XML element, not of the element itself. myXMLElement.insertTextAsContent("\r", LocationOptions.after); myXMLElement = myDocument.xmlElements.item(0).xmlElements.item(1); myXMLElement.insertTextAsContent("Static text: ", LocationOptions.before); myXMLElement.insertTextAsContent("\r", LocationOptions.after); //To add text inside the element, set the location option to beginning or end. myXMLElement = myDocument.xmlElements.item(0).xmlElements.item(2); myXMLElement.insertTextAsContent("Text at the start of the element: ", LocationOptions.atBeginning); myXMLElement.insertTextAsContent(" Text at the end of the element.", LocationOptions.atEnd); myXMLElement.insertTextAsContent("\r", LocationOptions.after); //Add static text outside the element. myXMLElement = myDocument.xmlElements.item(0).xmlElements.item(3); myXMLElement.insertTextAsContent("Text before the element: ", LocationOptions.before); myXMLElement.insertTextAsContent(" Text after the element.", LocationOptions.after); //To insert text inside the text of an element, work with the text objects contained by the element. myXMLElement.words.item(2).insertionPoints.item(0).contents = "(the third word of) ";

Marking up existing layouts

In some cases, an XML publishing project does not start with an XML fileespecially when you need to convert an existing page layout to XML. For this type of project, you can mark up existing page-layout content and add it to an XML structure. You can then export this structure for further processing by XML tools outside InDesign.

Mapping tags to styles

One of the quickest ways to apply formatting to XML text elements is to use XMLImportMaps, also known as tag-to-style mapping. When you do this, you can associate a specific XML tag with a paragraph or character style. When you use the mapXMLTagsToStyles method of the document, InDesign applies the style to the text, as shown in the following script fragment (from the MapTagsToStyles tutorial script):
var myDocument = app.documents.item(0); //Create a tag to style mapping. myDocument.xmlImportMaps.add(myDocument.xmlTags.item("heading_1"), myDocument.paragraphStyles.item("heading 1")); myDocument.xmlImportMaps.add(myDocument.xmlTags.item("heading_2"), myDocument.paragraphStyles.item("heading 2")); myDocument.xmlImportMaps.add(myDocument.xmlTags.item("para_1"), myDocument.paragraphStyles.item("para 1")); myDocument.xmlImportMaps.add(myDocument.xmlTags.item("body_text"), myDocument.paragraphStyles.item("body text")); //Map the XML tags to the defined styles. myDocument.mapXMLTagsToStyles(); //Place the XML element in the layout to see the result. var myPage = myDocument.pages.item(0); var myTextFrame = myPage.textFrames.add({geometricBounds:myGetBounds(myDocument, myPage)}); var myStory = myTextFrame.parentStory; myStory.placeXML(myDocument.xmlElements.item(0));

CHAPTER 9: XML

Adding XML elements to a layout

137

Mapping styles to tags

When you have formatted text that is not associated with any XML elements, and you want to move that text into an XML structure, use style-to-tag mapping, which associates paragraph and character styles with XML tags. To do this, use xmlExportMap objects to create the links between XML tags and styles, then use the mapStylesToXMLTags method to create the corresponding XML elements, as shown in the following script fragment (from the MapStylesToTags tutorial script):
var myDocument = app.documents.item(0); //Create a style to tag mapping. myDocument.xmlExportMaps.add(myDocument.paragraphStyles.item("heading 1"), myDocument.xmlTags.item("heading_1")); myDocument.xmlExportMaps.add(myDocument.paragraphStyles.item("heading 2"), myDocument.xmlTags.item("heading_2")); myDocument.xmlExportMaps.add(myDocument.paragraphStyles.item("para 1"), myDocument.xmlTags.item("para_1")); myDocument.xmlExportMaps.add(myDocument.paragraphStyles.item("body text"), myDocument.xmlTags.item("body_text")); //Apply the style to tag mapping. myDocument.mapStylesToXMLTags();

Another approach is simply to have your script create a new XML tag for each paragraph or character style in the document, and then apply the style to tag mapping, as shown in the following script fragment (from the MapAllStylesToTags tutorial script):
var myDocument = app.documents.item(0); //Create tags that match the style names in the document, //creating an XMLExportMap for each tag/style pair. for(var myCounter = 0; myCounter<myDocument.paragraphStyles.length; myCounter++){ var myParagraphStyle = myDocument.paragraphStyles.item(myCounter); var myParagraphStyleName = myParagraphStyle.name; var myXMLTagName = myParagraphStyleName.replace(/\ /gi, "_") myXMLTagName = myXMLTagName.replace(/\[/gi, "") myXMLTagName = myXMLTagName.replace(/\]/gi, "") var myXMLTag = myDocument.xmlTags.add(myXMLTagName); myDocument.xmlExportMaps.add(myParagraphStyle, myXMLTag); } //Apply the style to tag mapping. myDocument.mapStylesToXMLTags();

Marking up graphics
The following script fragment shows how to associate an XML element with a graphic (for the complete script, see MarkingUpGraphics):
var myXMLTag = myDocument.xmlTags.add("graphic"); var myGraphic = myDocument.pages.item(0).place(File(/c/test.tif")); //Associate the graphic with a new XML element as you create the element. var myXMLElement = myDocument.xmlElements.Item(0).xmlElements.add(myXMLTag, myGraphic);

CHAPTER 9: XML

Adding XML elements to a layout

138

Applying styles to XML elements

In addition to using tag-to-style and style-to-tag mappings or applying styles to the text and page items associated with XML elements, you also can apply styles to XML elements directly. The following script fragment shows how to use three methods: applyParagraphStyle, applyCharacterStyle, and applyObjectStyle. (For the complete script, see ApplyStylesToXMLElements.)
var myDocument = app.documents.add(); myDocument.viewPreferences.horizontalMeasurementUnits = MeasurementUnits.points; myDocument.viewPreferences.verticalMeasurementUnits = MeasurementUnits.points; //Create a series of XML tags. var myHeading1XMLTag = myDocument.xmlTags.add("heading_1"); var myHeading2XMLTag = myDocument.xmlTags.add("heading_2"); var myPara1XMLTag = myDocument.xmlTags.add("para_1"); var myBodyTextXMLTag = myDocument.xmlTags.add("body_text"); //Create a series of paragraph styles. var myHeading1Style = myDocument.paragraphStyles.add(); myHeading1Style.name = "heading 1"; myHeading1Style.pointSize = 24; var myHeading2Style = myDocument.paragraphStyles.add(); myHeading2Style.name = "heading 2"; myHeading2Style.pointSize = 14; myHeading2Style.spaceBefore = 12; var myPara1Style = myDocument.paragraphStyles.add(); myPara1Style.name = "para 1"; myPara1Style.pointSize = 12; myPara1Style.firstLineIndent = 0; var myBodyTextStyle = myDocument.paragraphStyles.add(); myBodyTextStyle.name = "body text"; myBodyTextStyle.pointSize = 12; myBodyTextStyle.firstLineIndent = 24; //Create a character style. var myCharacterStyle = myDocument.characterStyles.add(); myCharacterStyle.name = "Emphasis"; myCharacterStyle.fontStyle = "Italic"; //Add XML elements and apply paragraph styles. var myRootXMLElement = myDocument.xmlElements.item(0); var myXMLElementA = myRootXMLElement.xmlElements.add(myHeading1XMLTag); myXMLElementA.contents = "Heading 1"; myXMLElementA.insertTextAsContent("\r", XMLElementPosition.afterElement); myXMLElementA.applyParagraphStyle(myHeading1Style, true); var myXMLElementB = myRootXMLElement.xmlElements.add(myPara1XMLTag); myXMLElementB.contents = "This is the first paragraph in the article."; myXMLElementB.insertTextAsContent("\r", XMLElementPosition.afterElement); myXMLElementB.applyParagraphStyle(myPara1Style, true); var myXMLElementC = myRootXMLElement.xmlElements.add(myBodyTextXMLTag); myXMLElementC.contents = "This is the second paragraph in the article."; myXMLElementC.insertTextAsContent("\r", XMLElementPosition.afterElement); myXMLElementC.applyParagraphStyle(myBodyTextStyle, true); var myXMLElementD = myRootXMLElement.xmlElements.add(myHeading2XMLTag); myXMLElementD.contents = "Heading 2"; myXMLElementD.insertTextAsContent("\r", XMLElementPosition.afterElement); myXMLElementD.applyParagraphStyle(myHeading2Style, true); var myXMLElementE = myRootXMLElement.xmlElements.add(myPara1XMLTag); myXMLElementE.contents = "This is the first paragraph following the subhead."; myXMLElementE.insertTextAsContent("\r", XMLElementPosition.afterElement); myXMLElementE.applyParagraphStyle(myPara1Style, true);

CHAPTER 9: XML

Adding XML elements to a layout

139

var myXMLElementF = myRootXMLElement.xmlElements.add(myBodyTextXMLTag); myXMLElementF.contents = "This is the second paragraph following the subhead."; myXMLElementF.insertTextAsContent("\r", XMLElementPosition.afterElement); myXMLElementF.applyParagraphStyle(myBodyTextStyle, true); var myXMLElementG = myRootXMLElement.xmlElements.add(myBodyTextXMLTag); myXMLElementG.contents = "Note:"; myXMLElementG = myXMLElementG.move(LocationOptions.atBeginning, myXMLElementF) myXMLElementG.insertTextAsContent(" ", XMLElementPosition.afterElement); myXMLElementG.applyCharacterStyle(myCharacterStyle, true); // Add text elements. var myPage = myDocument.pages.item(0); var myTextFrame = myPage.textFrames.add({geometricBounds:myGetBounds(myDocument, myPage)}); var myStory = myTextFrame.parentStory; myStory.placeXML(myRootXMLElement);

Working with XML tables

InDesign automatically imports XML data into table cells when the data is marked up using HTML standard table tags. If you cannot use the default table mark-up or prefer not to use it, InDesign can convert XML elements to a table using the convertElementToTable method. To use this method, the XML elements to be converted to a table must conform to a specific structure. Each row of the table must correspond to a specific XML element, and that element must contain a series of XML elements corresponding to the cells in the row. The following script fragment shows how to use this method (for the complete script, see ConvertXMLElementToTable). The XML element used to denote the table row is consumed by this process.
var myDocument = app.documents.add(); //Create a series of XML tags. var myRowTag = myDocument.xmlTags.add("row"); var myCellTag = myDocument.xmlTags.add("cell"); var myTableTag = myDocument.xmlTags.add("table"); //Add XML elements. var myRootXMLElement = myDocument.xmlElements.item(0); with(myRootXMLElement){ var myTableXMLElement = xmlElements.add(myTableTag); with(myTableXMLElement){ for(var myRowCounter = 1;myRowCounter < 7;myRowCounter++){ with(xmlElements.add(myRowTag)){ myString = "Row " + myRowCounter; for(var myCellCounter = 1; myCellCounter < 5; myCellCounter++){ with(xmlElements.add(myCellTag)){ contents = myString + ":Cell " + myCellCounter; } } } } } } var myTable = myTableXMLElement.convertElementToTable(myRowTag, myCellTag); // Add text elements. var myPage = myDocument.pages.item(0); var myTextFrame = myPage.textFrames.add({geometricBounds:myGetBounds(myDocument, myPage)}); var myStory = myTextFrame.parentStory; myStory.placeXML(myRootXMLElement);

CHAPTER 9: XML

Adding XML elements to a layout

140

Once you are working with a table containing XML elements, you can apply table styles and cell styles to the XML elements directly, rather than having to apply the styles to the tables or cells associated with the XML elements. To do this, use the applyTableStyle and applyCellStyle methods, as shown in the following script fragment (from the ApplyTableStyles tutorial script):
var myDocument = app.documents.add(); //Create a series of XML tags. var myRowTag = myDocument.xmlTags.add("row"); var myCellTag = myDocument.xmlTags.add("cell"); var myTableTag = myDocument.xmlTags.add("table"); //Create a table style and a cell style. var myTableStyle = myDocument.tableStyles.add({name:"myTableStyle"}); myTableStyle.startRowFillColor = myDocument.colors.item("Black"); myTableStyle.startRowFillTint = 25; myTableStyle.endRowFillColor = myDocument.colors.item("Black"); myTableStyle.endRowFillTint = 10; var myCellStyle = myDocument.cellStyles.add(); myCellStyle.fillColor = myDocument.colors.item("Black"); myCellStyle.fillTint = 45 //Add XML elements. var myRootXMLElement = myDocument.xmlElements.item(0); with(myRootXMLElement){ var myTableXMLElement = xmlElements.add(myTableTag); with(myTableXMLElement){ for(var myRowCounter = 1;myRowCounter < 7;myRowCounter++){ with(xmlElements.add(myRowTag)){ myString = "Row " + myRowCounter; for(var myCellCounter = 1; myCellCounter < 5; myCellCounter++){ with(xmlElements.add(myCellTag)){ contents = myString + ":Cell " + myCellCounter; } } } } } } var myTable = myTableXMLElement.convertElementToTable(myRowTag, myCellTag); var myTableXMLElement = myDocument.xmlElements.item(0).xmlElements.item(0); myTableXMLElement.applyTableStyle(myTableStyle); myTableXMLElement.xmlElements.item(0).applyCellStyle(myCellStyle); myTableXMLElement.xmlElements.item(5).applyCellStyle(myCellStyle); myTableXMLElement.xmlElements.item(10).applyCellStyle(myCellStyle); myTableXMLElement.xmlElements.item(15).applyCellStyle(myCellStyle); myTableXMLElement.xmlElements.item(16).applyCellStyle(myCellStyle); myTableXMLElement.xmlElements.item(21).applyCellStyle(myCellStyle); // Add text elements. var myPage = myDocument.pages.item(0); var myTextFrame = myPage.textFrames.add({geometricBounds:myGetBounds(myDocument, myPage)}); var myStory = myTextFrame.parentStory; myStory.placeXML(myRootXMLElement); myTable.alternatingFills = AlternatingFillsTypes.alternatingRows;

XML Rules
The InDesign XML- rules feature provides a powerful set of scripting tools for working with the XML content of your documents. XML rules also greatly simplify the process of writing scripts to work with XML elements and dramatically improve performance of finding, changing, and formatting XML elements. While XML rules can be triggered by application events, like open, place, and close, typically you will run XML rules after importing XML into a document. (For more information on attaching scripts to events, see Chapter 7, Events.) This chapter gives an overview of the structure and operation of XML rules, and shows how to do the following:

Define an XML rule. Apply XML rules. Find XML elements using XML rules. Format XML data using XML rules. Create page items based on XML rules. Restructure data using XML rules. Use the XML-rules processor.

We assume you already read Adobe InDesign CS4 Scripting Tutorial and know how to create and run a script. We also assume you have some knowledge of XML and have read Chapter 9, XML.

Overview
InDesigns XML rules feature has three parts:

XML rules processor (a scripting object) Locates XML elements in an XML structure using XPath and applies the appropriate XML rule(s). It is important to note that a script can contain multiple XML rule processor objects, and each rule-processor object is associated with a given XML rule set. Glue code A set of routines provided by Adobe to make the process of writing XML rules and interacting with the XML rules-processor easier. XML rules The XML actions you add to a script. XML rules are written in scripting code. A rule combines an XPath-based condition and a function to apply when the condition is met. The apply function can perform any set of operations that can be defined in InDesign scripting, including changing the XML structure; applying formatting; and creating new pages, page items, or documents.

A script can define any number of rules and apply them to the entire XML structure of an InDesign document or any subset of elements within the XML structure. When an XML rule is triggered by an XML rule processor, the rule can apply changes to the matching XML element or any other object in the document. You can think of the XML rules feature as being something like XSLT. Just as XSLT uses XPath to locate XML elements in an XML structure, then transforms the XML elements in some way, XML rules use XPath to
141

CHAPTER 10: XML Rules

Overview

142

locate and act on XML elements inside InDesign. Just as an XSLT template uses an XML parser outside InDesign to apply transformations to XML data, InDesign's XML Rules Processor uses XML rules to apply transformations to XML data inside InDesign.

Why use XML rules?

In prior releases of InDesign, you could not use XPath to navigate the XML structure in your InDesign files. Instead, you needed to write recursive script functions to iterate through the XML structure, examining each element in turn. This was difficult and slow. XML rules makes it easy to find XML elements in the structure, by using XPath and relying on InDesign's XML-rules processors to find XML elements. An XML-rule processor handles the work of iterating through the XML elements in your document, and it can do so much faster than a script.

XML-rules programming model

An XML rule contains three things: 1. A name (as a string). 2. An XPath statement (as a string). 3. An apply function. The XPath statement defines the location in the XML structure; when the XML rules processor finds a matching element, it executes the apply function defined in the rule. Here is a sample XML rule:
function RuleName() { this.name = "RuleNameAsString"; this.xpath = "ValidXPathSpecifier"; this.apply = function (element, ruleSet, ruleProcessor){ //Do something here. //Return true to stop further processing of the XML element return true; }; // end of Apply function }

In the above example, RuleNameAsString is the name of the rule and matches the RuleName; ValidXPathSpecifier is an XPath expression. Later in this chapter, we present a series of functioning XML-rule examples. NOTE: XML rules support a limited subset of XPath 1.0. See XPath limitations on page 146.

XML-rule sets
An XML-rule set is an array of one or more XML rules to be applied by an XML-rules processor. The rules are applied in the order in which they appear in the array. Here is a sample XML-rule set:
var myRuleSet = new Array (new SortByName, new AddStaticText, new LayoutElements, new FormatElements );

CHAPTER 10: XML Rules

Overview

143

In the above example, the rules listed in the myRuleSet array are defined elsewhere in the script. Later in this chapter, we present several functioning scripts containing XML-rule sets.

Glue code
In addition to the XML-rules processor object built into InDesigns scripting model, Adobe provides a set of functions intended to make the process of writing XML rules much easier. These functions are defined within the glue code.jsx file:
__processRuleSet(root, ruleSet) To execute a set of XML rules, your script must call the __processRuleSet function and provide an XML element and an XML rule set. The XML element

defines the point in the XML structure at which to begin processing the rules.
__processChildren(ruleProcessor) This function directs the XML-rules processor to apply matching XML rules to child elements of the matched XML element. This allows the rule applied to a parent XML element to execute code after the child XML elements are processed. By default, when an XML-rules processor applies a rule to the children of an XML element, control does not return to the rule. You can use the __processChildren function to return control to the apply function of the rule after the child XML elements are processed. __skipChildren(ruleProcessor) This function tells the processor not to process any

descendants of the current XML element using the XML rule. Use this function when you want to move or delete the current XML element or improve performance by skipping irrelevant parts of an XML structure.

Iterating through an XML structure

The XML-rules processor iterates through the XML structure of a document by processing each XML element in the order in which it appears in the XML hierarchy of the document. The XML-rules processor uses a forward-only traversal of the XML structure, and it visits each XML element in the structure twice (in the order parent-child-parent, just like the normal ordering of nested tags in an XML file). For any XML element, the XML-rules processor tries to apply all matching XML rules in the order in which they are added to the current XML rule set. The __processRuleSet function applies rules to XML elements in depth first order; that is, XML elements and their child elements are processed in the order in which they appear in the XML structure. For each branch of the XML structure, the XML-rules processor visits each XML element before moving on to the next branch. After an XML rule is applied to an XML element, the XML-rules processor continues searching for rules to apply to the descendents of that XML element. An XML rule can alter this behavior by using the __skipChildren or __processChildren function, or by changing the operation of other rules. To see how all these functions work together, import the DepthFirstProcessingOrder.xml file into a new document, then run the DepthFirstProcessingOrder.jsx script. InDesign creates a text frame, that lists the attribute names of each element in the sample XML file in the order in which they were visited by each rule. You can use this script in conjunction with the AddAttribute tutorial script to troubleshoot XML traversal problems in your own XML documents (you must edit the AddAttribute script to suit your XML structure). Normal iteration (assuming a rule that matches every XML element in the structure) is shown in the following figure:

CHAPTER 10: XML Rules

Overview

144

Root 1

B 2 9

BA 3 4 5

8 BAA BAB 6 7 BACA BACB BAC

Iteration with __processChildren (assuming a rule that matches every XML element in the structure) is shown in the following figure:

Root 9

B 8 6 7

BA 5 4 3

BAA

BAB

BAC 2 1

BACA

BACB

Iteration given the following rule set is shown in the figure after the script fragment. The rule set includes two rules that match every element, including one that uses __processChildren. Every element is processed twice. (For the complete script, see ProcessChildren.)

CHAPTER 10: XML Rules

Overview

145

Root 1 19 2 14 B 18 16

BA 3 5 7 13

BB 15

BC 17

BAA 4

BAB 6 8

BAC 12 10

BACA 9

BACB 11

Changing structure during iteration

When an XML-rules processor finds a matching XML element and applies an XML rule, the rule can change the XML structure of the document. This can conflict with the process of applying other rules, if the affected XML elements in the structure are part of the current path of the XML-rules processor. To prevent errors that might cause the XML-rules processor to become invalid, the following limitations are placed on XML structure changes you might make within an XML rule:

CHAPTER 10: XML Rules

Overview

146

Deleting an ancestor XML element To delete an ancestor XML element of the matched XML element, create a separate rule that matches and processes the ancestor XML element. Inserting a parent XML element To add an ancestor XML element to the matched XML element, do so after processing the current XML element. The ancestor XML element you add is not processed by the XML-rules processor during this rule iteration (as it appears above the current element in the hierarchy). Deleting the current XML element You cannot delete or move the matched XML element until any child XML elements contained by the element are processed. To make this sort of change, use the __skipChildren function before making the change. No repetitive processing Changes to nodes that were already processed will not cause the XML rule to be evaluated again.

Handling multiple matching rules

When multiple rules match an XML element, the XML-rules processor can apply some or all of the matching rules. XML rules are applied in the order in which they appear in the rule set, up to the point that one of the rule apply functions returns true. In essence, returning true means the element was processed. Once a rule returns true, any other XML rules matching the XML element are ignored. You can alter this behavior and allow the next matching rule to be applied, by having the XML rule apply function return false. When an apply function returns false, you can control the matching behavior of the XML rule based on a condition other than the XPath property defined in the XML rule, like the state of another variable in the script.

XPath limitations
InDesigns XML rules support a limited subset of the XPath 1.0 specification, specifically including the following capabilities:

Find an element by name, specifying a path from the root; for example, /doc/title. Find paths with wildcards and node matches; for example, /doc/*/subtree/node(). Find an element with a specified attribute that matches a specified value; for example, /doc/para[@font='Courier']. Find an element with a specified attribute that does not match a specified value; for example, /doc/para[@font !='Courier']. Find a child element by numeric position (but not last()); for example, /doc/para[3]. Find self or any descendent; for example, //para. Find comment as a terminal; for example, /doc/comment(). Find PI by target or any; for example, /doc/processing-instruction('foo'). Find multiple predicates; for example, /doc/para[@font='Courier'][@size=5][2]. Find along following-sibling axes; for example, /doc/note/following-sibling::*.

CHAPTER 10: XML Rules

Overview

147

Due to the one-pass nature of this implementation, the following XPath expressions are specifically excluded:

No ancestor or preceding-sibling axes, including .., ancestor::, preceding-sibling::. No path specifications in predicates; for example, foo[bar/c]. No last() function. No text() function or text comparisons; however, you can use InDesign scripting to examine the text content of an XML element matched by a given XML rule. No compound Boolean predicates; for example, foo[@bar=font or @c=size]. No relational predicates; for example, foo[@bar < font or @c > 3]. No relative paths; for example, doc/chapter.

Error handling
Because XML rules are part of the InDesign scripting model, scripts that use rules do not differ in nature from ordinary scripts, and they benefit from the same error-handling mechanism. When InDesign generates an error, an XML-rules script behaves no differently than any other script. InDesign errors can be captured in the script using whatever tools the scripting language provides to achieve that; for example, try...catch blocks. InDesign does include a series of errors specific to XML-rules processing. An InDesign error can occur at XML-rules processor initialization, when a rule uses a non-conforming XPath specifier (see XPath limitations on page 146). An InDesign error also can be caused by a model change that invalidates the state of an XML-rules processor. XML structure changes caused by the operation of XML rules can invalidate the XML-rules processor. These changes to the XML structure can be caused by the script containing the XML-rules processor, another concurrently executing script, or a user action initiated from the user interface. XML structure changes that invalidate an XML-rules processor lead to errors when the XML-rules processor's iteration resumes. The error message indicates which XML structural change caused the error.

XML rules flow of control

As a script containing XML rules executes, the flow of control passes from the script function containing the XML rules to each XML rule, and from each rule to the functions defined in the glue code. Those functions pass control to the XML-rules processor which, in turn, iterates through the XML elements in the structure. Results and errors are passed back up the chain until they are handled by a function or cause a scripting error. The following diagram provides a simplified overview of the flow of control in an XML-rules script:

CHAPTER 10: XML Rules

XML rules examples

148

XML rules script

XM Lr ule s

glue code

XML rule processor

XML rule XPath condition

XPath condition __processRuleSet

t XML elemen

XML element

XPath evaluation

apply()

__processChildren

t XML elemen

XML structure iteration

CHAPTER 10: XML Rules

XML rules examples

151

//Adds a return character at the end of the "name" XML element. function ProcessName(){ this.name = "ProcessName"; this.xpath = "/devices/device/name"; // Define the apply function. this.apply = function(myElement, myRuleProcessor){ with(myElement){ //Add static text at the beginning of the XML element. insertTextAsContent("Device Name: ", XMLElementPosition.beforeElement); //Add a return character at the end of the XML element. insertTextAsContent("\r", XMLElementPosition.afterElement); } return true;// Succeeded } //End of apply function } //Adds a return character at the end of the "type" XML element. function ProcessType(){ this.name = "ProcessType"; this.xpath = "/devices/device/type"; // Define the apply function. this.apply = function(myElement, myRuleProcessor){ with(myElement){ //Add static text at the beginning of the XML element. insertTextAsContent("Circuit Type: ", XMLElementPosition.beforeElement); //Add a return character at the end of the XML element. insertTextAsContent("\r", XMLElementPosition.beforeElement); } return true;// Succeeded } //End of apply function } //Adds a return character at the end of the "part_number" XML element. function ProcessPartNumber(){ this.name = "ProcessPartNumber"; this.xpath = "/devices/device/part_number"; // Define the apply function. this.apply = function(myElement, myRuleProcessor){ with(myElement){ //Add static text at the beginning of the XML element. insertTextAsContent("Part Number: ", XMLElementPosition.beforeElement); //Add a return character at the end of the XML element. insertTextAsContent("\r", XMLElementPosition.afterElement); } return true;// Succeeded } //End of apply function } //Adds static text around the "minimum" and "maximum" //XML elements of the "supply_voltage" XML element. function ProcessSupplyVoltage(){ this.name = "ProcessSupplyVoltage"; this.xpath = "/devices/device/supply_voltage"; // Define the apply function. this.apply = function(myElement, myRuleProcessor){ //Note the positions at which we insert the static text. If we use //XMLElementPosition.elementEnd, the static text will appear //inside the XML element. If we use XMLElementPosition.afterElement, //the static text appears outside the XML elment (as a text element of //the parent element).

CHAPTER 10: XML Rules

XML rules examples

152

with(myElement){ //Add static text to the beginning of the voltage range. insertTextAsContent("Supply Voltage: From ", XMLElementPosition.elementStart); with(myElement.xmlElements.item(0)){ insertTextAsContent(" to ", XMLElementPosition.afterElement); } with(myElement.xmlElements.item(-1)){ //Add static text to the beginning of the voltage range. insertTextAsContent(" volts", XMLElementPosition.afterElement); } //Add a return at the end of the XML element. insertTextAsContent("\r", XMLElementPosition.afterElement); } return true;// Succeeded } //End of apply function } function ProcessPackageType(){ this.name = "ProcessPackageType"; this.xpath = "/devices/device/package/type"; // Define the apply function. this.apply = function(myElement, myRuleProcessor){ with(myElement){ insertTextAsContent("-", XMLElementPosition.afterElement); } return true; } //End of apply function } //Add the text "Package:" before the list of packages. function ProcessPackageOne(){ this.name = "ProcessPackageOne"; this.xpath = "/devices/device/package[1]"; this.apply = function(myElement, myRuleProcessor){ with(myElement){ insertTextAsContent("Package: ", XMLElementPosition.elementStart); } return false; //Return false to let other XML rules process the element. } //End of apply function } //Add commas between the package types. function ProcessPackages(){ this.name = "ProcessPackages"; this.xpath = "/devices/device/package"; this.apply = function(myElement, myRuleProcessor){ with(myElement){ if(myElement.parent.xmlElements.nextItem(myElement).markupTag.name == "package"){ insertTextAsContent(", ", XMLElementPosition.elementEnd); } else{ insertTextAsContent("\r", XMLElementPosition.afterElement); } } return true; } //End of apply function }

CHAPTER 10: XML Rules

CHAPTER 10: XML Rules

XML rules examples

156

main(); function main(){ if (app.documents.length != 0){ var myDocument = app.documents.item(0); var myRuleSet = new Array (new AddAttribute); with(myDocument){ var elements = xmlElements; __processRuleSet(elements.item(0), myRuleSet); } } else{ alert("No open document"); } function AddAttribute(){ this.name = "AddAttribute"; this.xpath = "/devices/device/part_number"; this.apply = function(myElement, myRuleProcessor){ myElement.parent.xmlAttributes.add("part_number", myElement.texts.item(0).contents); return true; } } }

In the previous XML rule, we copied the data from an XML element into an XML attribute attached to its parent XML element. Instead, what if we want to move the XML element data into an attribute and remove the XML element itself? Use the convertToAttribute method, as shown in the following script (from the ConvertToAttribute tutorial script):
main(); function main(){ if (app.documents.length != 0){ var myDocument = app.documents.item(0); var myRuleSet = new Array (new ConvertToAttribute); with(myDocument){ var elements = xmlElements; __processRuleSet(elements.item(0), myRuleSet); } } else{ alert("No open document"); } //Converts all part_number XML elements to XML attributes. function ConvertToAttribute(){ this.name = "ConvertToAttribute"; this.xpath = "/devices/device/part_number"; // Define the apply function. this.apply = function(myElement, myRuleProcessor){ //Use __skipChildren to prevent the XML rule processor from becoming //invalid when we convert the XML element to an attribute. __skipChildren(myRuleProcessor); //Converts the XML element to an XML attribute of its parent XML element. myElement.convertToAttribute("PartNumber"); return true; } } }

To move data from an XML attribute to an XML element, use the convertToElement method, as described in Chapter 9, XML.

CHAPTER 10: XML Rules

XML rules examples

main(); function main(){ if (app.documents.length != 0){ var myDocument = app.documents.item(0); var myRuleSet = new Array (new FindByFindText); with(myDocument){ var elements = xmlElements; __processRuleSet(elements.item(0), myRuleSet); } } else{ alert("No open document"); } function FindByFindText(){ this.name = "FindByFindText"; this.xpath = "/devices/device/description"; this.apply = function(myElement, myRuleProcessor){ if(myElement.texts.item(0).contents != ""){ //Clear the find text preferences. myResetFindText(); //Search for the word "triangle" in the content of the element. app.findTextPreferences.findWhat = "triangle"; var myFoundItems = myElement.texts.item(0).findText(); if(myFoundItems.length != 0){ myElement.texts.item(0).fillColor = app.documents.item(0).swatches.item(-1); } myResetFindText(); } return true; } } function myResetFindText(){ app.findTextPreferences = NothingEnum.nothing; app.changeTextPreferences = NothingEnum.nothing; } }

The following script shows how to use the findGrep method to find and format XML content (for the complete script, see FindXMLElementByFindGrep):
main(); function main(){ if (app.documents.length != 0){ var myDocument = app.documents.item(0); var myRuleSet = new Array (new FindByContent); myResetFindChangeGrep(); app.findGrepPreferences.findWhat = "(?i)pulse.*?triangle|triangle.*?pulse"; with(myDocument){ var elements = xmlElements; __processRuleSet(elements.item(0), myRuleSet); } myResetFindChangeGrep(); } else{ alert("No open document"); }

CHAPTER 10: XML Rules

XML rules examples

Successive rules move and format their content into container elements inside the row XML element.
function ProcessPrice(){ this.name = "ProcessPrice"; this.xpath = "//device[@type = 'VCO']/price"; this.apply = function(myElement, myRuleProcessor){ with(myElement){ __skipChildren(myRuleProcessor); var myNewElement = myContainerElement.xmlElements.item(-1) .xmlElements.add(app.documents.item(0).xmlTags.item("Column")); var myElement = myElement.move(LocationOptions.atBeginning, myNewElement); myElement.insertTextAsContent("$", XMLElementPosition.beforeElement); } return true; } } }

Once all of the specified XML elements have been wrapped, we can convert the container element to a table.
var myTable = myContainerElement.convertElementToTable(myRowTag, myColumnTag);

Scripting the XML-rules processor object

While we have provided a set of utility functions in glue code.jsx, you also can script the XML-rules processor object directly. You might want do this to develop your own support routines for XML rules or to use the XML-rules processor in other ways. When you script XML elements outside the context of XML rules, you cannot locate elements using XPath. You can, however, create an XML rule that does nothing more than return matching XML elements, and apply the rule using an XML-rules processor, as shown in the following script. (This script uses the same XML data file as the sample scripts in previous sections.) For the complete script, see XMLRulesProcessor.

CHAPTER 10: XML Rules

Scripting the XML-rules processor object

168

main(); function main(){ var myXPath = ["/devices/device"]; var myXMLMatches = mySimulateXPath(myXPath); //At this point, myXMLMatches contains all of the XML elements //that matched the XPath expression provided in myXPath. function mySimulateXPath(myXPath){ var myXMLElements = new Array; var myRuleProcessor = app.xmlRuleProcessors.add(myXPath); try{ var myMatchData = myRuleProcessor.startProcessingRuleSet(app.documents. item(0).xmlElements.item(0)); while(myMatchData != undefined){ var myElement = myMatchData.element; myXMLElements.push(myElement); myMatchData = myRuleProcessor.findNextMatch(); } myRuleProcessor.endProcessingRuleSet(); myRuleProcessor.remove(); return myXMLElements; } catch (myError){ myRuleProcessor.endProcessingRuleSet(); myRuleProcessor.remove(); throw myError; } } }

Ananda Coomaraswamy - The Dance of Shiva
No ratings yet
Ananda Coomaraswamy - The Dance of Shiva
228 pages
Gandhi in Cartoons - Compressed
No ratings yet
Gandhi in Cartoons - Compressed
248 pages
RTI Tamil PDF
No ratings yet
RTI Tamil PDF
202 pages
Translation of Goswami Harirai's Jarasandhavadha Mahakavyam
No ratings yet
Translation of Goswami Harirai's Jarasandhavadha Mahakavyam
287 pages
Thirupavai
100% (16)
Thirupavai
160 pages
Epigraphia Indica Vol 03 PDF
No ratings yet
Epigraphia Indica Vol 03 PDF
498 pages
இந்துத்துவா என்றால் என்ன - PDF
100% (1)
இந்துத்துவா என்றால் என்ன - PDF
33 pages
Curriculum Vitae DR Thamotharan
0% (1)
Curriculum Vitae DR Thamotharan
21 pages
(Objects - Histories) Kajri Jain-Gods in The Bazaar - The Economies of Indian Calendar Art-Duke University Press Books (2007)
No ratings yet
(Objects - Histories) Kajri Jain-Gods in The Bazaar - The Economies of Indian Calendar Art-Duke University Press Books (2007)
449 pages
English Santhali PDF
100% (1)
English Santhali PDF
8 pages
Archaeological Survey of India
No ratings yet
Archaeological Survey of India
27 pages
Minakshi Temple Report
No ratings yet
Minakshi Temple Report
17 pages
ACL7 Light
No ratings yet
ACL7 Light
69 pages
Moovendar Yaar PDF
100% (12)
Moovendar Yaar PDF
175 pages
04 Tiruttani
No ratings yet
04 Tiruttani
38 pages
Archaeological Servey of India
No ratings yet
Archaeological Servey of India
402 pages
Vedanayaga Sastriar
100% (1)
Vedanayaga Sastriar
94 pages
Epigraphy - Iconography - Sunita - Stapathi
No ratings yet
Epigraphy - Iconography - Sunita - Stapathi
14 pages
Buddhist Studies Review 8 1 2 1991 Lal Mani Joshi PDF
No ratings yet
Buddhist Studies Review 8 1 2 1991 Lal Mani Joshi PDF
131 pages
Studies in Tamil Literature and History 1930
No ratings yet
Studies in Tamil Literature and History 1930
363 pages
3325 Part B DCHB Ramanathapuram
No ratings yet
3325 Part B DCHB Ramanathapuram
184 pages
John Mosteller - The Future of Indian Art History
No ratings yet
John Mosteller - The Future of Indian Art History
7 pages
Kashi Mahatmya of Swami Shivananda Saraswati Editor Dr. Harish Chandra Mani Tripathi - Sampurnanand Sanskrit University Varanasi
No ratings yet
Kashi Mahatmya of Swami Shivananda Saraswati Editor Dr. Harish Chandra Mani Tripathi - Sampurnanand Sanskrit University Varanasi
302 pages
Reference Table of Pali Literature
100% (1)
Reference Table of Pali Literature
104 pages
MUDUMOZHIKKAANJ
No ratings yet
MUDUMOZHIKKAANJ
54 pages
Vedic Rudra-Siva by Doris M Srinivasan (1983)
No ratings yet
Vedic Rudra-Siva by Doris M Srinivasan (1983)
13 pages
40 Vayadhirkku Piragu Vaaname Ellai by Osho
No ratings yet
40 Vayadhirkku Piragu Vaaname Ellai by Osho
135 pages
The Book of Millennial Temple at Tanjore
No ratings yet
The Book of Millennial Temple at Tanjore
146 pages
India's Past - Macdonell PDF
100% (1)
India's Past - Macdonell PDF
362 pages
Kayar
No ratings yet
Kayar
186 pages
Provincialseries00mirzuoft PDF
0% (1)
Provincialseries00mirzuoft PDF
356 pages
Kambalathu Nayakkars
No ratings yet
Kambalathu Nayakkars
1 page
Indian Archaeology 1967 - 68 PDF
No ratings yet
Indian Archaeology 1967 - 68 PDF
69 pages
Tamil-Brahmi (Tamili) Pottery Shards of Tamil Nadu A Study
No ratings yet
Tamil-Brahmi (Tamili) Pottery Shards of Tamil Nadu A Study
14 pages
(Society For Archaeological, Historical and Epigraphical Research, Devakunjari) Madurai Through The Ages - From The Earliest Times To 1801 AD PDF
No ratings yet
(Society For Archaeological, Historical and Epigraphical Research, Devakunjari) Madurai Through The Ages - From The Earliest Times To 1801 AD PDF
400 pages
Without This Message by Purchasing Novapdf : Print To PDF
No ratings yet
Without This Message by Purchasing Novapdf : Print To PDF
70 pages
Sasanian Sealstones
No ratings yet
Sasanian Sealstones
5 pages
In The Making of The Teyongsi Sirijunga Sinthebe 2.0
100% (2)
In The Making of The Teyongsi Sirijunga Sinthebe 2.0
29 pages
Koil Ozhugu SriRangamTemple
No ratings yet
Koil Ozhugu SriRangamTemple
35 pages
Anantapur Kurnool Linguistic Census - 1951 - ANA
No ratings yet
Anantapur Kurnool Linguistic Census - 1951 - ANA
38 pages
Purana Abimana Sthalam 4-Sundara Perumal Koil
No ratings yet
Purana Abimana Sthalam 4-Sundara Perumal Koil
27 pages
2015.20736.sanatana Dharma Deepika Vol1
No ratings yet
2015.20736.sanatana Dharma Deepika Vol1
290 pages
Vikramadityankadaigalpar1 PDF
No ratings yet
Vikramadityankadaigalpar1 PDF
150 pages
Kalachuvadu PDF
No ratings yet
Kalachuvadu PDF
3 pages
1-000880. Hindu - Castes - and - Sects - Vol 2
No ratings yet
1-000880. Hindu - Castes - and - Sects - Vol 2
572 pages
Tamil Daily Calendar 2024 - 2005 தமிழ் தினசரி கால…
No ratings yet
Tamil Daily Calendar 2024 - 2005 தமிழ் தினசரி கால…
1 page
Electronic Spreadsheet (MS Office Excel) - Sinhala
No ratings yet
Electronic Spreadsheet (MS Office Excel) - Sinhala
40 pages
Devatamurtipraka014702mbp PDF
No ratings yet
Devatamurtipraka014702mbp PDF
336 pages
Essays On Gupta Culture
100% (1)
Essays On Gupta Culture
3 pages
Report of A Tour in Bihar and Bengal in
No ratings yet
Report of A Tour in Bihar and Bengal in
281 pages
ARCH3067S-Integrated Project Assignment 1 (V1.1) - Edited
No ratings yet
ARCH3067S-Integrated Project Assignment 1 (V1.1) - Edited
6 pages
Study Material - Unit -8 (Eng)
No ratings yet
Study Material - Unit -8 (Eng)
132 pages
Tamil Words in Sanskrit
No ratings yet
Tamil Words in Sanskrit
2 pages
Art and Allegiance in Baroque
100% (1)
Art and Allegiance in Baroque
354 pages
Later Pandya Collapsed Architectural Engineering Adinarayana Perumal Temple in Madurai - A Ground Report
100% (1)
Later Pandya Collapsed Architectural Engineering Adinarayana Perumal Temple in Madurai - A Ground Report
6 pages
The Nature of Subjects, Topics and Agents: A Cognitive Explanation (Van Oosten, 1984)
No ratings yet
The Nature of Subjects, Topics and Agents: A Cognitive Explanation (Van Oosten, 1984)
347 pages
InDesignCS5 ScriptingGuide JS
No ratings yet
InDesignCS5 ScriptingGuide JS
209 pages
InDesign ScriptingGuide VB
100% (1)
InDesign ScriptingGuide VB
231 pages
InDesign ScriptingGuide JS
100% (1)
InDesign ScriptingGuide JS
217 pages
InDesignCS5 Scripting Guide As
No ratings yet
InDesignCS5 Scripting Guide As
231 pages