Scribd
Upload
901 views2 pages

Connect Run Arduino Uno r3 Whit ATMEGA8 From Ebay - Com (Doflye Net) Version

Connect / Run Arduino uno r3 whit ATMEGA8A-PU from ebay.com (doflye.net) version After 2 days I finally have successfully run this uno whit old atmega8 chip. Just follow this guide: 1. Get an arduino board and USB cable 2. Download the arduino environment - (windows) from www.arduino.cc - (linux ubuntu 12.10+) Connect the board 3. Install the drivers for U

Uploaded by

César Alonso
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
901 views2 pages

Connect Run Arduino Uno r3 Whit ATMEGA8 From Ebay - Com (Doflye Net) Version

Connect / Run Arduino uno r3 whit ATMEGA8A-PU from ebay.com (doflye.net) version After 2 days I finally have successfully run this uno whit old atmega8 chip. Just follow this guide: 1. Get an arduino board and USB cable 2. Download the arduino environment - (windows) from www.arduino.cc - (linux ubuntu 12.10+) Connect the board 3. Install the drivers for U

Uploaded by

César Alonso
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

Connect/Run Arduino uno r3 whit ATMEGA8A-PU from ebay.com (doflye.

net) version

http://1.bp.blogspot.com/uEBBarleGr0/UtawoxymBmI/AAAAAAAAEvs/or0GsXbma7Q/s1600/19091-1-digitalzone88.jpg
After 2 days i finally have successfully run this uno r3 whit old atmega8 chip, just follow this guide: 1. Get an Arduino board and USB cable 2. Download the Arduino environment - (windows) from www.arduino.cc - (linux ubuntu) in Software Center or from www.arduino.cc 3. Connect the board 4. Install the drivers for UNO, you can find more info on google or arduino web site - (linux ubuntu 12.10+) sudo apt-get update && sudo apt-get install arduino arduino-core - (windows) arduino web site 5.1 Open file boards.txt - (windows) C:/Program Files/arduino/hardware/arduino/boards.txt - (linux) usr/share/arduino/hardware/arduino/boards.txt - - (ubuntu) type "gksudo nautilus" or "gksudo gedit" in terminal to open protected file 5.2 Insert code below AT THE END of boards.txt and save it. 6. Launch the Arduino application 7. Open the blink example - (File>Examples>Basic>Blink) 7. Select your board "Arduino Optiboot8" - (Tools>Board>Arduino Optiboot8) 8. Select your serial port. If there is no USB option on serial port or serial port is not available,

you have problem whit driver. - (Tools>Serial Port>USB) 9. Upload the program Tested on Windows 7 and Ubuntu 13.10. This code was found inhttp://www.doflye.net forum whit the BIG help of "google translate" :) ############################################################## # Custom board "Arduino Optiboot8" # Arduino uno r3 ATMEGA8A-PU opti8.name = Arduino Optiboot8 opti8.upload.protocol = Arduino opti8.upload.maximum_size = 7680 opti8.upload.speed = 115200 opti8.bootloader.low_fuses = 0xBF opti8.bootloader.high_fuses = 0xcc opti8.bootloader.path = optiboot opti8.bootloader.file = optiboot_atmega8.hex opti8.bootloader.unlock_bits = 0x3F opti8.bootloader.lock_bits = 0x0F opti8.build.mcu = atmega8 opti8.build.f_cpu = 16000000L opti8.build.core = arduino opti8.build.variant = standard

You might also like