Scribd
Upload
86 views

RC Beam Design

This document summarizes the design parameters for a reinforced concrete beam with a design moment of 199.51 kN.m and design shear of 102 kN. The beam has a width of 200 mm, depth of 450 mm, and concrete cover of 35 mm. Based on the design for flexure and shear, the beam requires a minimum of 9 bars with a diameter of 20 mm for tension and 1 bar with a diameter of 20 mm for compression. For shear reinforcement, the beam requires 10 mm diameter stirrups spaced at a maximum of 207.5 mm.

Uploaded by

Buboy Velas
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
86 views

RC Beam Design

This document summarizes the design parameters for a reinforced concrete beam with a design moment of 199.51 kN.m and design shear of 102 kN. The beam has a width of 200 mm, depth of 450 mm, and concrete cover of 35 mm. Based on the design for flexure and shear, the beam requires a minimum of 9 bars with a diameter of 20 mm for tension and 1 bar with a diameter of 20 mm for compression. For shear reinforcement, the beam requires 10 mm diameter stirrups spaced at a maximum of 207.5 mm.

Uploaded by

Buboy Velas
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 3

BEAM DETAILS

DESIGN PARAMETERS

Design Moment
Design Shear
Beam Width (B)
Beam Depth (D)
Concrete Cover
Effective Depth
Main Bar
Shear Bar

199.51
102
200
450
35
415
20
10

kN.m. 0.9246
kN
mm
0.9246
mm
mm
mm
mm
mm

F'c

20.68

Fy
1

248
0.85
0.9

Design for Flexure

Design For Shear

max =

Vc =
62.90745
Vc =
53.47134
Shear Bars Necessary
Vn =
120
Vs =
57.09255

0.75b

max

max

0.75

0.85 f'c B1 (600)


fy (600-fy)

0.75

8964.78
210304

Check if Beam Size is Adequate for the Shea


251.6298 kN

max =
0.03197

=
0.3834
Ru
=
6.13521 Mpa
Mu max =
190.195 kN.m.
Therefore:
Doubly Reinforced!
As = As1 + As2
As1
= 2653.58 mm2
Mu2
=
9.3153 kN.m.
As2
=
109.83
Tension = 2763.41 mm
9 pcs
20 mm
Steel
a
=
187.19 mm
c
=
220.224
f's
=
504.643
Therefore:
Compression Steel Will Yield!
Compression Steel =
53.9743 mm
1 pcs
20 mm
FOR SINGLY REINFORCED
Ru
p
pmin
As

=
=
=
=

6.435703
0.034203 not ok
0.005645 ok
2838.82 mm2 10 pcs

20 mm

For Two Legged Stirrups


Av
=
157.0796
S

= 283.1654
125.8149 kN
207.5
207.5
103.75
103.75

kN
kN

am Size is Adequate for the Shear:


OK

gged Stirrups

mm
Max S =

Ok
207.5

STRENGTH REDUCTION FACTORS, (PHI)

You might also like