Scribd
Upload
2K views1 page

CARPROG Daihatsu Immo Manual

This document provides information on immobilizer systems for various Daihatsu vehicle models from various years, which use Texas transponder keys. It details that the immobilizer box is located near the ignition key and needs to be removed to access the 93C66 EEPROM chip for programming new transponder keys using an A5 or A4 adapter through the CarProg device, either by shorting the quartz resonator or removing the 93C66 chip from the immobilizer board.

Uploaded by

cameraman01
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
2K views1 page

CARPROG Daihatsu Immo Manual

This document provides information on immobilizer systems for various Daihatsu vehicle models from various years, which use Texas transponder keys. It details that the immobilizer box is located near the ignition key and needs to be removed to access the 93C66 EEPROM chip for programming new transponder keys using an A5 or A4 adapter through the CarProg device, either by shorting the quartz resonator or removing the 93C66 chip from the immobilizer board.

Uploaded by

cameraman01
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

S4.

3 CarProg Daihatsu immobiliser manual

Model CHARADE COPEN CUORE FEROZA MOVE SIRION TERIOS YRV

Year

Transponder type TEX TEX TEX TEX TEX TEX TEX TEX

S4.3.1 Daihatsu immobiliser system with separated immo box and Texas transponder (4C by Silca). Immobiliser box are located near to ignition key. Usually this is black or brown box marked immobilizer or 134.2 kHz.

Remove immobiliser ECU from the car and open it. Find 93C66 EEPROM in DIP package. Use A5 or A4 adapter and follow CarProg instruction to program transponder key. Short quartz resonator for in-circuit EEPROM programming or remove 93C66 from immobiliser board.

All right reserved www.codecard.lt

You might also like