Scribd
Upload
218 views6 pages

Samsung HT-THX25 - Firmware Update PDF

This document provides instructions for updating the firmware on a DVD home theater system. It describes how to check the current firmware version, and how to perform the update using either a disc or USB drive. The update process involves erasing and rewriting the firmware file multiple times before completing and restarting the system automatically.

Uploaded by

alxfromplanetx
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
218 views6 pages

Samsung HT-THX25 - Firmware Update PDF

This document provides instructions for updating the firmware on a DVD home theater system. It describes how to check the current firmware version, and how to perform the update using either a disc or USB drive. The update process involves erasing and rewriting the firmware file multiple times before completing and restarting the system automatically.

Uploaded by

alxfromplanetx
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 6

DVD HOMETHEATER SYSTEM Firmware Update

Contents

1. Check Products F/W Version 2. Update by Disc or USB device

1. Check Products FIRMWARE Version

- Turn on the product. Make the tray open by pressing ONEN/CLOSE button.

- Press MENU button on the remote controller, then press Numeric button 8,9,5.

- In some case of 5-Disc supported models, Play an DVD disc first ,before Tray open - Do the same procedure mentioned before : press Menu, 8, 9, 5 buttons on the remote controller ( Model name : HT-DB6XX, HT-DS6XX, HT-P4X )

- Products FIRMWARE Version and File name is displayed in screen.

: It shows Firmware version of product Above screen, The Version is 1.12.

: It shows Firmware File name of product. Above screen The file name is PDADVIDS.ROM.

2. UPDATE by Disc or USB Device

- In case of Using a disc, Make an update disc under below recommendation. . Disc type : ISO type . Multi-session : No Multi-session . Recording speed : under 8x - You can update new F/W, by playing the update disc

- For the USB HOST playback supported model, Copy F/W file to USB device .Format the USB Device .Copy the firmware file to USB Memory device - You can update new F/W, by select USB function after USB device plug-in

Important notice - Check the F/W file name of the set and file name of new firmware you want to update is same - If the file name is different between New F/W file and filename on the set, Firmware UPDATE can not be done.

- Turn on the product, Play an Update disc or a USB Device - Firmware update is carried, repeating ERASE and WRITE after READING

- After Update complete, The set goes to turn off and turn on state automatically. - Press

(STOP) button on the main unit in No disc condition.

- Pressing the button continuously until INITIAL display in the Display window

- In power off condition, Press

(STOP) button on the main unit again.

- Pressing the button until the Standby LED on the main unit blink.

- After initial, you can select an OSD language in the SETUP Menu

You might also like