0% found this document useful (0 votes)

157 views159 pages

DNP V3.00 Protocol Assignments: Electro Industries / Gaugetech

DNP V3.00 Protocol Assignments For Nexus® 1250, 1260 and 1270 Power Monitors

Uploaded by

iamxerxis

We take content rights seriously. If you suspect this is your content, claim it here.

Available Formats

Download as PDF, TXT or read online on Scribd

0% found this document useful (0 votes)

157 views159 pages

DNP V3.00 Protocol Assignments: Electro Industries / Gaugetech

DNP V3.00 Protocol Assignments For Nexus® 1250, 1260 and 1270 Power Monitors

Uploaded by

iamxerxis

We take content rights seriously. If you suspect this is your content, claim it here.

Available Formats

Download as PDF, TXT or read online on Scribd

You are on page 1/ 159

Electro Industries / GaugeTech

"The Leader in Web Accessed Power Monitoring and Control"

DNP V3.00 Protocol Assignments

For Nexus 1250, 1260 and 1270 Power Monitors

Revision 1.7 November 14, 2007 Doc # E107748

Electro Industries / GaugeTech

"The Leader in Web Accessed Power Monitoring and Control"

Electro Industries/Gaugetech assumes no responsibility for any inaccuracies and/or errors that may appear in this document. The information printed in this document is subject to change without notice and should not be construed as commitment by Electro Industries/Gaugetech E.I. Electronics, Inc.

All comments pertaining to this document should be forwarded to: Attn: Engineering Dept. - DNP Object Mappings Electro Industries/Gaugetech 1800 Shames Drive Westbury, New York 11590 Tel: Fax: E-mail: Website: (516) 334-0870 (516) 338-4741 [email protected] www.electroind.com

Nexus is a registered mark of Electro Industries/GaugeTech. DNP is a trademark of the DNP Users Group. Copyright 2007 E.I. Electronics, Inc. Electro Industries/Gaugetech. All rights reserved. Printed in the U.S.A.

TABLE OF CONTENTS

Chapter 1

DNP V3.00 Device Profile Document

Chapter 2

DNP3 Protocol Primer

Chapter 3

Implementation Table

Chapter 4

Object List

Chapter 5

Point List Real Time Block 1 Cycle Block Tenth Second Block One Second Block Thermal Average Block Maximum Block Minimum Block Maximum Time Stamp Block Minimum Time Stamp Block Energy Block Harmonic Magnitude Block Harmonic Phase Block THD/K-Factor Block Harmonic Time Stamp Block Phase Angle Block Block Window Average Block Rolling Window/Predictive Rolling Window Block Limit Block Digital Input Block Primary Accumulation Block Time of Use Period Time Stamp Block Time of Use Prior Season Register 1 Block Time of Use Prior Season Register 2 Block Time of Use Prior Season Register 3 Block Time of Use Prior Season Register 4 Block Time of Use Prior Season Register 5 Block Time of Use Prior Season Register 6 Block Time of Use Prior Season Register 7 Block

19 19 19 19 20 21 22 24 26 28 30 30 53 77 77 77 78 78 79 82 84 85 86 87 87 88 89 90 91

Electro Industries/GaugeTech

DOC #: E107748

Time of Use Prior Season Register 8 Block Time of Use Prior Season Total Block Time of Use Prior Month Register 1 Block Time of Use Prior Month Register 2 Block Time of Use Prior Month Register 3 Block Time of Use Prior Month Register 4 Block Time of Use Prior Month Register 5 Block Time of Use Prior Month Register 6 Block Time of Use Prior Month Register 7 Block Time of Use Prior Month Register 8 Block Time of Use Prior Month Total Block Time of Use Current Season Register 1 Block Time of Use Current Season Register 2 Block Time of Use Current Season Register 3 Block Time of Use Current Season Register 4 Block Time of Use Current Season Register 5 Block Time of Use Current Season Register 6 Block Time of Use Current Season Register 7 Block Time of Use Current Season Register 8 Block Time of Use Current Season Total Block Time of Use Current Month Register 1 Block Time of Use Current Month Register 2 Block Time of Use Current Month Register 3 Block Time of Use Current Month Register 4 Block Time of Use Current Month Register 5 Block Time of Use Current Month Register 6 Block Time of Use Current Month Register 7 Block Time of Use Current Month Register 8 Block Time of Use Current Month Total Block Internal Input Pulse Accumulation Block Pulse Accumulation Block Window Avg/Maximum Block Temperature Analog Input Block Limit Combination Block Relay Logic Block Action Block

92 93 94 95 96 97 98 99 100 101 102 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 118 119 120 122 122 123 124 135

Chapter 6

Communication Data Formats 6.1: Type F1 Day of Week 6.2: Type F2 HSI Delta Input 6.3: Type F3 HSI Current State Input 6.4: Type F4 Secondary Voltage, Current, VA, VAR, W, F 6.5: Type F5 Power Factor 6.6: Type F6 Angle 6.7: Type F7 Percentage 6.8: Type F8 Energy Counter (Binary/Secondary)

137 137 137 138 138 140 141 142 143

Electro Industries/GaugeTech

DOC #: E107748

6.9: Type F9 Phase Sequence 6.10: Type F10 Average Status 6.11: Type F11 Limit States 6.12: Type F12 Low Speed Input States 6.13: Type F13 External Digital Input States 6.14: Type F14 External Input Accumulations 6.15: Type F15 Energy Counter (Binary/Primary) 6.16: Type F16 Average Select 6.17: Type F17 CT/PT Ratio 6.18: Type F18 Fixed Window Average for Internal Inputs 6.19: Type F19 Temperature 6.20: Type F20 Relay Logic States 6.21: Type F21 Relay Delays 6.22: Type F22 Desired Relay States 6.23: Type F23 Relay Pending Updates 6.24: Type F24 Shadowed Relay State 6.25: Type F25 Confirmed Polled Relay State 6.26: Type F26 Valid Flag for Confirmed Relay State 6.27: Type F27 Locked Relay 6.28: Type F28 Locked Relay State 6.29: Type F29 Action Points

143 143 144 144 145 145 146 146 147 147 148 149 149 150 150 151 151 152 152 153 154

Electro Industries/GaugeTech

DOC #: E107748

iii

CHAPTER 1 Device Profile Document

DNP V3.00
DEVICE PROFILE DOCUMENT This document must be accompanied by a table having the following headings: Object Group Request Function Codes Object Variation Request Qualifiers Object Name (optional) Vendor Name: Electro Industries/Gaugetech Device Name: Nexus 1250, 1260 and 1270 Meter Highest DNP Level Supported: For Requests 1 For Responses 1 Device Function: Master X Slave Response Function Codes Response Qualifiers

Notable objects, functions, and/or qualifiers supported in addition to the Highest DNP Levels Supported (the complete list is described in the attached table): The Nexus 1250, 1260 and 1270 meters do not support report by exception. Level 1 Certification applies for configurations where the response consists of a single link layer frame. Configurations where the response requires multiple link layer frames, while not supporting report by exception, will still operate successfully with Level 1 Master Stations. A link layer frame can contain up to 249 bytes of data in the application layer. A typical configuration for the Nexus 1250, 1260 and 1270 device consists of all One-Second Readings (Object 30, points 30-60), Thermal Averages for Power (Object 30, points 73-84), Fixed Window Averages for Power (Object 30, points 17721774) and Primary Accumulations of Energy (Object 30, points 42-61). This typical configuration contains 4 bytes of overhead, 4 object headers at 7 bytes per header and point information in blocks 62, 24, 6 and 80 bytes, for a total of 204 bytes of data in the application layer.

Maximum Data Link Frame Size (octets): Transmitted Received 292 292

Maximum Application Fragment Size (octets): Transmitted Received 249 249

Electro Industries/GaugeTech

DOC #: E107748

Chapter 1: Device Profile

Maximum Data Link Re-tries: X None Fixed at Configurable, range

Maximum Application Layer Re-tries: X None Configurable, range to (Fixed is not permitted)

Requires Data Link Layer Confirmation: X Never Always Sometimes If 'Sometimes', when? ______________________________________________ Configurable If 'Configurable', how? ______________________________________________ Requires Application Layer Confirmation: Never X Always (not recommended) When reporting Event Data (Slave devices only) When sending multi-fragment responses (Slave devices only) Sometimes If 'Sometimes', when? ______________________________________________ Configurable If 'Configurable', how? ______________________________________________ Timeouts while waiting for: Data Link Confirm X None Fixed at Complete Appl. Fragment X None Fixed at Application Confirm X None Fixed at Complete Appl. Response X None Fixed at Others Variable Variable Variable Variable Configurable Configurable Configurable Configurable

Attach explanation if 'Variable' or 'Configurable' was checked for any timeout. Sends/Executes Control Operations:

Electro Industries/GaugeTech

DOC #: E107748

Chapter 1: Device Profile WRITE Binary Outputs X Never Always Sometimes SELECT/OPERATE Never X Always Sometimes DIRECT OPERATE Never X Always Sometimes DIRECT OPERATE - NO ACK Never X Always Sometimes Count > 1 X Never Pulse On X Never Pulse Off X Never Latch On Never Latch Off Never Queue X Never Always Sometimes Clear Queue X Never Always Sometimes Configurable Configurable Always Sometimes Always Sometimes Always Sometimes X Always Sometimes X Always Sometimes

Configurable Configurable Configurable Configurable Configurable Configurable Configurable Configurable Configurable

Attach explanation if 'Sometimes' or 'Configurable' was checked for any operation. FILL OUT THE FOLLOWING ITEM FOR MASTER DEVICES ONLY: Expects Binary Input Change Events: Either time-tagged or non-time-tagged for a single event Both time-tagged and non-time-tagged for a single event Configurable (attach explanation)

Electro Industries/GaugeTech

DOC #: E107748

Chapter 1: Device Profile

FILL OUT THE FOLLOWING ITEMS FOR SLAVE DEVICES ONLY: Reports Binary Input Change Events when no specific variation requested: X Never Only time-tagged Only non-time-tagged Configurable to send both, one or the other (attach explanation) Sends Unsolicited Responses: X Never Configurable (attach explanation) Only certain objects Sometimes (attach explanation) ENABLE/DISABLE UNSOLICITED Function codes supported Default Counter Object/Variation: No Counters Reported Configurable (attach explanation) X Default Object 20 Default Variation 5 Point-by-point list attached Sends Multi-Fragment Responses: Counters Roll Over at: No Counters Reported Configurable (attach explanation) 16 Bits 32 Bits Other Value _____________ X Point-by-point list attached X Yes No Reports time-tagged Binary Input Change Events when no specific variation requested: X Never Binary Input Change With Time Binary Input Change With Relative Time Configurable (attach explanation)

Sends Static Data in Unsolicited Responses: X Never When Device Restarts When Status Flags Change No other options are permitted.

Electro Industries/GaugeTech

DOC #: E107748

CHAPTER 2 DNP3 Protocol Primer

In this chapter, you'll find an informative and thorough document that describes DNP for all levels of user. Some of the topics discussed include: What is DNP? Client-server relationship. Common system architectures. Data transmission. Event classification. DNP function.

We hope you'll find the information helpful in your use of DNP.

Electro Industries/GaugeTech

DOC #: E107748

A DNP3 Protocol Primer

This is a primer for people who want a quick understanding of DNP3 without having to comb through the tedious details of a complex specification. So let us start with what it is. Protocols define the rules by which devices talk with each other, and DNP3 is a protocol for transmission of data from point A to point B using serial communications. It has been used primarily by utilities like the electric companies, but it operates suitably in other areas. A typical electric company may have a centralized operations center that monitors the state of all the equipment in each of its substations. In the operations center, a powerful computer stores all of the incoming data and displays the system for the human operators. Substations have many devices that need monitoring (are circuit breakers opened or closed?), current sensors (how much current is flowing?) and voltage transducers (what is the line potential?). That only scratches the surface; a utility is interested in monitoring many parameters, too numerous to discuss here. The operations personnel often need to switch sections of the power grid into or out of service. One or more computers are situated in the substation to collect the data for transmission to the master station in the operations center. The substation computers are also called upon to energize or de-energize the breakers and voltage regulators. DNP3 provides the rules for substation computers and master station computers to communicate data and control commands. DNP3 is a non-proprietary protocol that is available to anyone. Only a nominal fee is charged for documentation, but otherwise it is available worldwide with no restrictions. This means a utility can purchase master station and substation computing equipment from any manufacturer and be assured that they will reliably talk to each other. Vendors compete based upon their computer equipments features, costs and quality factors instead of who has the best protocol. Utilities are not stuck with one manufacturer after the initial sale. What do the computers talk about? The substation computer gathers data for transmission to the master as 1. 2. 3. 4. Binary input data that is useful to monitor two-state devices. For example a circuit breaker is closed or tripped or a pipeline pressure alarm shows normal or excessive. Analog input data that conveys voltages, currents, power, reservoir water levels and temperatures. Count input data that reports kilowatt hours of energy. Files that contain configuration data.

The master station issues control commands that take the form of 1. 2. Close or trip a circuit breaker, raise or lower a gate, and open or close a valve. Analog output values to set a regulated pressure or set a desired voltage level.

Other things the computers talk to each other about are synchronizing the time and date, sending historical or logged data, waveform data, and on and on. DNP3 was designed to optimize the transmission of data acquisition information and control commands from one computer to another. It is not a general purpose protocol for transmitting hypertext, multimedia or huge files. The terms server and client are applicable to DNP3 systems. For our purposes, the definition of a server is a device or software process that has data or information that someone else wants. Substation computers are servers. A client is a device or software process that requests data from a server. A master station is a client.

Binary Input 8 7 6 5 4 3 2 1 0 Analog Input Counter Input 4 3 3 2 2 1 1 0 0

Master (Client) Control Output 6 5 4 3 2 1 0

Binary Input 8 7 6 5 4 3 2 1 0 Analog Input Counter Input 4 3 3 2 2 1 1 0 0

Slave (Server) Control Output 6 5 4 3 2 1 0

Analog Output 4 3 2 1 0

DNP3 User's Code

DNP3 Software

Physical Media User Requests User Responses

Figure 1
Figure 1 shows the client-server relationship and gives a simplistic view of the databases and software processes involved. The master or client is on the left side of figure 1, and the slave or server is on the right side. A series of square blocks at the top of the server depicts its databases and output devices. The various data types are conceptually organized as arrays. An array of binary input values represents states of physical or logical boolean devices. Values in the analog input array represent input quantities that the server measured or computed. An array of counters represents count values, such as kilowatt hours, that are ever increasing (until they reach a maximum and then roll over to zero and start counting again.) Control outputs are organized into an array representing physical or logical on-off, raise-lower and trip-close points. Lastly, the array of analog outputs represents physical or logical analog quantities such as those used for setpoints. The elements of the arrays are labeled 0 through N - 1 where N is the number of blocks shown for the respective data type. In DNP3 terminology, the element numbers are called the point indexes. Indexes are zero-based in DNP3, that is, the lowest element is always identified as zero. Some protocols use 1-based indexing. Notice that the DNP3 client, or master, also has a similar database for the input data types (binary, analog and counter.) The master, or client, uses values in its database for the specific purposes of displaying system states, closed-loop control, alarm notification, billing, and much, much more. An objective of the client is to keep its database updated. It accomplishes this by sending requests to the server (slave) asking it to return the values in the servers database. This is termed polling. The server responds to the clients request by transmitting the contents of its database. Arrows are drawn at the bottom of figure 1 showing the direction of the requests (toward the server) and the direction of the responses (toward the client.) Later we will discuss systems whereby the slaves transmit responses without being asked.

The client and the server shown in figure 1 each have two software layers. The top layer is the DNP3 user layer. In the client, it is the software that interacts between the database and initiates the requests for the servers data. In the server, it is the software that fetches the requested data from the servers database for responding to client requests. It is interesting to note, that if no physical separation of the client and server existed, eliminating the DNP3 might be possible by connecting these two upper layers together. However, since physical, or possibly logical separation of the client and server exists, DNP3 software is placed at a lower level. The DNP3 users code uses the DNP3 software for transmission of requests or responses to the matching DNP3 users code at the other end. More will be said about data types and software layers later, but first we want to examine a few typical system architectures where DNP3 is used.

DNP3 Client (Master)

DNP3 Server (Slave)

One-on-One

DNP3 Client (Master)

DNP3 Server (Slave)

Figure 2
Figure 2 shows common system architectures in use today. At the top is a simple one-on-one system having one master station and one slave. The physical connection between the two is typically a dedicated or dial-up telephone line. The second type of system is known as a multidrop design. One master station communicates with multiple slave devices. Conversations are typically between the client and one server at a time. The master requests data from the first slave, then moves onto the next slave for its data, and continually interrogates each slave in a round robin order. The communication media is a multi-dropped telephone line, fiber optic cable, or radio. Each slave can hear messages from the master and is only permitted to respond to messages addressed to itself. Slaves may or may not be able to hear each other. In some multidrop forms, communications are peer-to-peer. A station may operate as a client for gathering information or sending commands to the server in another station. And then, it may change roles to become a server to another station.

The middle row in figure 2 shows a hierarchical type system where the device in the middle is a server to the client at the left and is a client with respect to the server on the right. The middle device is often termed a sub-master. Both lines at the bottom of figure 2 show data concentrator applications and protocol converters. A device may gather data from multiple servers on the right side of the figure and store this data in its database where it is retrievable by a master station client on the left side of the figure. This design is often seen in substations where the data concentrator collects information from local intelligent devices for transmission to the master station. In recent years, several vendors have used TCP/IP to transport DNP3 messages in lieu of the media discussed above. Link layer frames, which we have not talked about yet, are embedded into TCP/IP packets. This approach has enabled DNP3 to take advantage of Internet technology and permitted economical data collection and control between widely separated devices. Many communication circuits between the devices are imperfect. They are susceptible to noise and signal distortion. The DNP3 software is layered to provide reliable data transmission and to effect an organized approach to the transmission of data and commands. Figure 3 shows the layering that was not shown in figure 1.

Binary Input 8 7 6 5 4 3 2 1 0

Master (Client)

Binary Input 8 7 6 5 4 3 2 1 0

Slave (Server) Control Output Analog 4 3 2 1 0 Counter 3 2 1 0 6 5 4 3 2 1 0

Analog 4 3 2 1 0

Counter 3 2 1 0

Analog Output 4 3 2 1 0

DNP3 User's Code DNP3 Application Layer Pseudo Transport Layer DNP3 Link Layer

Physical Media User Requests User Responses

Figure 3

The link layer has the responsibility of making the physical link reliable. It does this by providing error detection and duplicate frame detection. The link layer sends and receives packets, which in DNP3 terminology, are called frames.

Sometimes transmission of more than one frame is necessary to transport all of the information from one device to another. A DNP3 frame consists of a header and data section. The header specifies the frame size, which DNP3 station should receive the frame, which DNP3 device sent the frame and data link control information. The data section is commonly called the payload and contains the data passed down from the layers above. DNP3 Frame Header Data

Header Sync Length Link Control Destination Address Source Address CRC

Every frame begins with two sync bytes that help the receivers determine where the frame begins. The length specifies the number of octets in the remainder of the frame, not including CRC check octets. The link control octet is used between sending and receiving link layers to coordinate their activities. A destination address specifies which DNP3 device should process the data, and the source address identifies which DNP3 device sent the message. Having both destination and source addresses satisfies at least one requirement for peer-to-peer communications because the receiver knows where to direct its responses. 65520 individual addresses are available. Every DNP3 device must have a unique address within the collection of devices sending and receiving messages to and from each other. Three destination addresses are reserved by DNP3 to denote an all-call message; that is, the frame should be processed by all DNP3 devices. Thirteen addresses are reserved for special needs in the future. The data payload in the link frame contains a pair of CRC octets for every 16 data octets. This provides a high degree of assurance that communication errors can be detected. The maximum number of octets in the data payload is 250, not including CRC octets. (The longest link layer frame is 292 octets if all the CRC and header octets are counted.) One often hears the term link layer confirmation when DNP3 is discussed. A feature of DNP3's link layer is the ability for the transmitter of the frame to request the receiver to confirm that the frame arrived. Using this feature is optional, and it is often not employed. It provides an extra degree of assurance of reliable communications. If a confirmation is not received, the link layer may retry the transmission. Some disadvantages are the extra time required for confirmation messages and waiting for multiple timeouts when retries are configured. It is the responsibility of the transport layer to break long messages into smaller frames sized for the link layer to transmit, or when receiving, to reassemble frames into the longer messages. In DNP3 the transport layer is incorporated into the application layer. The transport layer requires only a single octet within the message to do its work. Therefore, since the link layer can handle only 250 data octets, and one of those is used for the transport function, then each link layer frame can hold as many as 249 application layer octets. Application layer messages are broken into fragments. Fragment size is determined by the size of the receiving devices buffer. It normally falls between 2048 and 4096 bytes. A message that is larger than a one fragment requires multiple fragments. Fragmenting messages is the responsibility of the application layer. Note that an application layer fragment of size 2048 must be broken into 9 frames by the transport layer, and a fragment size of 4096 needs 17 frames. Interestingly, it has been learned by experience that communications are sometimes more successful for systems operating in high noise environments if the fragment size is significantly reduced.

The application layer works together with the transport and link layers to enable reliable communications. It provides standardized functions and data formatting with which the user layer above can interact. Before functions, data objects and variations can be discussed, the terms static, events and classes need to be covered. In DNP3, the term static is used with data and refers to the current value. Thus static binary input data refers to the present on or off state of a bi-state device. Static analog input data contains the value of an analog at the instant it is transmitted. One possibility DNP3 allows is requesting some or all of the static data in a slave device. DNP3 events are associated with something significant happening. Examples are state changes, values exceeding some threshold, snapshots of varying data, transient data and newly available information. An event occurs when a binary input changes from an on to an off state or when an analog value changes by more than its configured deadband limit. DNP3 provides the ability to report events with and without time stamps so that the client can generate a time sequence report. The user layer can direct DNP3 to request events. Usually, a client is updated more rapidly if it mostly polls for events from the server and only occasionally asks for static data as an integrity measure. The reason updates are faster is because the number of events generated between server interrogations is small and, therefore, less data must be returned to the client. DNP3 goes a step further by classifying events into three classes. When DNP3 was conceived, class 1 events were considered as having higher priority than class 2 events, and class 2 were higher than class 3 events. While that scheme can be still be configured, some DNP3 users have developed other strategies more favorable to their operation for assigning events into the classes. The user layer can request the application layer to poll for class 1, 2 or 3 events or any combination of them. DNP3 has provisions for representing data in different formats. Examination of analog data formats is helpful to understand the flexibility of DNP3. Static, current value, analog data can be represented by variation numbers as follows: 1. 2. 3. 4. 5. 6. A 32-bit integer value with flag, A 16-bit integer value with flag, A 32-bit integer value, A 16-bit integer value, A 32-bit floating point value with flag and A 64-bit floating point value with flag. The flag referred to is a single octet with bit fields indicating whether the source is on-line, value contains a restart value, communications are lost with the source, the data is forced and the value is over range. Not all DNP3 devices can transmit or interpret all six variations. Later, DNP3 levels are discussed, but for now, suffice it to say that DNP3 devices must be able to transmit the simplest variations so that any receiver can interpret the contents. Event analog data can be represented by these variations: 1. 2. 3. 4. 5. 6. 7. 8. A 32-bit integer value with flag, A 16-bit integer value with flag, A 32-bit integer value with flag and event time, A 16-bit integer value with flag and event time, A 32-bit floating point value with flag, A 64-bit floating point value with flag, A 32-bit floating point value with flag and event time and A 32-bit floating point value with flag and event time. The flag has the same bit fields as for the static variations.

It looks like a variation one or two analog event cannot be differentiated from a variation one or two static analog value. DNP3 solves this predicament by assigning object numbers. Static analog values are assigned as object 30, and event analog values are assigned as object 32. Static analog values, object 30, can be formatted in one of 6 variations, and event analog values, object 32, can be formatted in one of 8 variations. When a DNP3 server transmits a message containing response data, the message identifies the object number and variation of every value within the message. Object and variation numbers are also assigned for counters, binary inputs, controls and analog outputs. In fact, all valid data types and formats in DNP3 are identified by object and variation numbers. Defining the allowable objects and variations helps DNP3 assure interoperability between devices. DNP3's basic documentation contains a library of valid objects and their variations. The clients user layer formulates its request for data from the server by telling the application layer what function to perform, like reading, and specifying which objects it wants from the server. The request can specify how many objects it wants or it can specify specific objects or a range of objects from index number X through index number Y. The application layer then passes the request down through the transport layer to the link layer that, in turn, sends the message to the server. The link layer at the server checks the frames for errors and passes them up to the transport layer where the complete message is assembled in the servers application layer. The application layer then tells the user layer which objects and variations were requested. Responses work similarly, in that, the servers user layer fetches the desired data and presents it to the application layer that formats the data into objects and variations. Data is then passed downward, across the communication channel and upward to the clients application layer. Here the data objects are presented to the user layer in a form that is native to the clients database. Reading data was mentioned in the above two paragraphs, but DNP3 software is designed to handle other functions. For one the client can set the time in the server. The client can transmit freeze accumulator requests, and it can transmit requests for control operations and setting of analog output values using select-before-operate or directoperate sequences. One area that has not been covered yet is transmission of unsolicited messages. This is a mode of operating where the server spontaneously transmits a response, possibly containing data, without having received a specific request for the data. Not all servers have this capability, but those that do must be configured to operate in this mode. This mode is useful when the system has many slaves and the master requires notification as soon as possible after a change occurs. Rather than waiting for a master station polling cycle to get around to it, the slave simply transmits the change. To configure a system for unsolicited messages, a few basics need to be considered. First, spontaneous transmissions should generally occur infrequently, otherwise, too much contention can occur, and controlling media access via master station polling would be better. The second basic issue is that the server should have some way of knowing whether it can transmit without stepping on someone elses message in progress. DNP3 leaves specification of algorithms to the system implementor. One last area of discussion involves implementation levels. The DNP3 organization recognizes that supporting every feature of DNP3 is not necessary for every device. Some devices are limited in memory and speed and do not need specific features, while other devices must have the more advanced features to accomplish their task. DNP3 organizes complexity into three levels. At the lowest level, level 1, only very basic functions must be provided and all others are optional. Level 2 handles more functions, objects and variations, and level 3 is even more sophisticated. Within each level only certain combinations of request formats and response formats are required. This was done to limit software code in clients and servers while still assuring interoperability. It should be apparent by now that DNP3 is a protocol that fits well into the data acquisition world. It transports data as generic values, it has a rich set of functions, and it was designed to work in a wide area communications network. The standardized approach of objects and variations, and link, transport and application layers, plus public availability makes DNP3 a protocol to be regarded.

CHAPTER 3 Implementation Table

OBJECT Obj Var Description

REQUEST Func Codes (dec) Qual Codes (hex)

RESPONSE Func Codes (dec) Qual Codes (hex)

1 1 1 2 2 2 2 10 10 10 12 12

0 1 2 0 1 2 3 0 1 2 0 1

Binary Input - All Variations Binary Input Binary Input with Status Binary Input Change - All Variations Binary Input Change without Time Binary Input Change with Time Binary Input Change with Relative Time Binary Output - All Variations Binary Output Binary Output Status Control Block - All Variations Control Relay Output Block 3, 4, 5, 6 17 129
echo of request

RESPONSE Func Codes (dec) Qual Codes (hex)

60 60 60 60 70 80

1 2 3 4 1 1

Class 0 Data Class 1 Data Class 2 Data Class 3 Data File Identifier Internal Indications

00 index=7

81 82 83 83 90 100 100 100 101 101 101

1 1 1 2 1 1 2 3 1 2 3

Storage Object Device Profile Private Registration Object Private Registration Object Descriptor Application Identifier Short Floating Point Long Floating Point Extended Floating Point Small Packed Binary-Coded Decimal Medium Packed Binary-Coded Decimal Large Packed Binary-Coded Decimal No object

Electro Industries/GaugeTech

DOC #: E107748

CHAPTER 4 Object List

Object
1- Binary Input 10- Binary Output 20- Binary Counter 30- Analog Input 50- Time and Date

Variation
1- Single Bit Binary Input 1- Binary Output 5- 32-Bit Binary Counter without Flag 4- 16-Bit Analog Input without Flag 1- Time and Date

Points
488 24 866 2097 326

Electro Industries/GaugeTech

Obj Var Index Line Description 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 135 135 136 136 136 136 136 136 136 136 136 136 136 136 136 136 136 136 137 137 137 137 137 137 137 137 137 137 137 137 137 137 137 Phase A-N / Phase A-B Voltage 14 Harmonic Magnitude Phase A-N / Phase A-B Voltage 15th Harmonic Magnitude Phase A-N / Phase A-B Voltage 16 Harmonic Magnitude Phase A-N / Phase A-B Voltage 17th Harmonic Magnitude Phase A-N / Phase A-B Voltage 18 Harmonic Magnitude Phase A-N / Phase A-B Voltage 19 Harmonic Magnitude Phase A-N / Phase A-B Voltage 20th Harmonic Magnitude Phase A-N / Phase A-B Voltage 21 Harmonic Magnitude Phase A-N / Phase A-B Voltage 22 Harmonic Magnitude Phase A-N / Phase A-B Voltage 23rd Harmonic Magnitude Phase A-N / Phase A-B Voltage 24 Harmonic Magnitude Phase A-N / Phase A-B Voltage 25th Harmonic Magnitude Phase A-N / Phase A-B Voltage 26 Harmonic Magnitude Phase A-N / Phase A-B Voltage 27 Harmonic Magnitude Phase A-N / Phase A-B Voltage 28th Harmonic Magnitude Phase A-N / Phase A-B Voltage 29 Harmonic Magnitude Phase A-N / Phase A-B Voltage 30 Harmonic Magnitude Phase A-N / Phase A-B Voltage 31st Harmonic Magnitude Phase A-N / Phase A-B Voltage 32nd Harmonic Magnitude Phase A-N / Phase A-B Voltage 33 Harmonic Magnitude Phase A-N / Phase A-B Voltage 34th Harmonic Magnitude Phase A-N / Phase A-B Voltage 35th Harmonic Magnitude Phase A-N / Phase A-B Voltage 36th Harmonic Magnitude Phase A-N / Phase A-B Voltage 37 Harmonic Magnitude Phase A-N / Phase A-B Voltage 38 Harmonic Magnitude Phase A-N / Phase A-B Voltage 39th Harmonic Magnitude Phase A-N / Phase A-B Voltage 40 Harmonic Magnitude Phase A-N / Phase A-B Voltage 41 Harmonic Magnitude Phase A-N / Phase A-B Voltage 42nd Harmonic Magnitude Phase A-N / Phase A-B Voltage 43 Harmonic Magnitude Phase A-N / Phase A-B Voltage 44th Harmonic Magnitude Phase A-N / Phase A-B Voltage 45th Harmonic Magnitude Phase A-N / Phase A-B Voltage 46 Harmonic Magnitude
th rd st th th th rd th th th th th nd st th th th th

Range +327% / -327% +327% / -327% +327% / -327% +327% / -327% +327% / -327% +327% / -327% +327% / -327% +327% / -327% +327% / -327% +327% / -327% +327% / -327% +327% / -327% +327% / -327% +327% / -327% +327% / -327% +327% / -327% +327% / -327% +327% / -327% +327% / -327% +327% / -327% +327% / -327% +327% / -327% +327% / -327% +327% / -327% +327% / -327% +327% / -327% +327% / -327% +327% / -327% +327% / -327% +327% / -327% +327% / -327% +327% / -327% +327% / -327%

Obj Var Index Line Description 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 956 957 958 959 960 961 962 963 964 965 966 967 968 969 970 971 972 973 974 975 976 977 978 979 980 981 982 983 984 985 986 987 163 163 163 163 163 163 163 163 163 163 163 163 163 163 163 163 163 163 163 163 163 163 163 163 163 163 163 163 164 164 164 164 Phase C Current 100 Harmonic Magnitude Phase C Current 101st Harmonic Magnitude Phase C Current 102 Harmonic Magnitude Phase C Current 103rd Harmonic Magnitude Phase C Current 104th Harmonic Magnitude Phase C Current 105 Harmonic Magnitude Phase C Current 106th Harmonic Magnitude Phase C Current 107 Harmonic Magnitude Phase C Current 108 Harmonic Magnitude Phase C Current 109th Harmonic Magnitude Phase C Current 110 Harmonic Magnitude Phase C Current 111th Harmonic Magnitude Phase C Current 112 Harmonic Magnitude Phase C Current 113 Harmonic Magnitude Phase C Current 114th Harmonic Magnitude Phase C Current 115 Harmonic Magnitude Phase C Current 116 Harmonic Magnitude Phase C Current 117th Harmonic Magnitude Phase C Current 118 Harmonic Magnitude Phase C Current 119 Harmonic Magnitude Phase C Current 120th Harmonic Magnitude Phase C Current 121 Harmonic Magnitude Phase C Current 122nd Harmonic Magnitude Phase C Current 123 Harmonic Magnitude Phase C Current 124 Harmonic Magnitude Phase C Current 125th Harmonic Magnitude Phase C Current 126 Harmonic Magnitude Phase C Current 127th Harmonic Magnitude Harmonic Phase Block Phase A-N / Phase A-B Voltage 0 Harmonic Phase Phase A-N / Phase A-B Voltage 1st Harmonic Phase Phase A-N / Phase A-B Voltage 2 Harmonic Phase Phase A-N / Phase A-B Voltage 3 Harmonic Phase
rd nd th th th rd st th th th th th th th th th th nd th

Range +327% / -327% +327% / -327% +327% / -327% +327% / -327% +327% / -327% +327% / -327% +327% / -327% +327% / -327% +327% / -327% +327% / -327% +327% / -327% +327% / -327% +327% / -327% +327% / -327% +327% / -327% +327% / -327% +327% / -327% +327% / -327% +327% / -327% +327% / -327% +327% / -327% +327% / -327% +327% / -327% +327% / -327% +327% / -327% +327% / -327% +327% / -327% +327% / -327% +180 degree / -180 degree +180 degree / -180 degree +180 degree / -180 degree +180 degree / -180 degree

Units 0.01% 0.01% 0.01% 0.01% 0.01% 0.01% 0.01% 0.01% 0.01% 0.01% 0.01% 0.01% 0.01% 0.01% 0.01% 0.01% 0.01% 0.01% 0.01% 0.01% 0.01% 0.01% 0.01% 0.01% 0.01% 0.01% 0.01% 0.01% 0.01 degree 0.01 degree 0.01 degree 0.01 degree

Type F7 F7 F7 F7 F7 F7 F7 F7 F7 F7 F7 F7 F7 F7 F7 F7 F7 F7 F7 F7 F7 F7 F7 F7 F7 F7 F7 F7 F6 F6 F6 F6

Electro Industries/GaugeTech

DOC #: E107748

Chapter 5: Point List

Obj Var Index Line Description 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 988 989 990 991 992 993 994 995 996 997 998 999 1000 1001 1002 1003 1004 1005 1006 1007 1008 1009 1010 1011 1012 1013 1014 1015 1016 1017 1018 1019 1020 164 164 164 164 165 165 165 165 165 165 165 165 166 166 166 166 166 166 166 166 166 166 166 166 166 166 166 166 167 167 167 167 167 Phase A-N / Phase A-B Voltage 4 Harmonic Phase Phase A-N / Phase A-B Voltage 5th Harmonic Phase Phase A-N / Phase A-B Voltage 6 Harmonic Phase Phase A-N / Phase A-B Voltage 7th Harmonic Phase Phase A-N / Phase A-B Voltage 8 Harmonic Phase Phase A-N / Phase A-B Voltage 9 Harmonic Phase Phase A-N / Phase A-B Voltage 10th Harmonic Phase Phase A-N / Phase A-B Voltage 11th Harmonic Phase Phase A-N / Phase A-B Voltage 12 Harmonic Phase Phase A-N / Phase A-B Voltage 13th Harmonic Phase Phase A-N / Phase A-B Voltage 14 Harmonic Phase Phase A-N / Phase A-B Voltage 15th Harmonic Phase Phase A-N / Phase A-B Voltage 16 Harmonic Phase Phase A-N / Phase A-B Voltage 17 Harmonic Phase Phase A-N / Phase A-B Voltage 18th Harmonic Phase Phase A-N / Phase A-B Voltage 19 Harmonic Phase Phase A-N / Phase A-B Voltage 20 Harmonic Phase Phase A-N / Phase A-B Voltage 21st Harmonic Phase Phase A-N / Phase A-B Voltage 22 Harmonic Phase Phase A-N / Phase A-B Voltage 23 Harmonic Phase Phase A-N / Phase A-B Voltage 24th Harmonic Phase Phase A-N / Phase A-B Voltage 25th Harmonic Phase Phase A-N / Phase A-B Voltage 26th Harmonic Phase Phase A-N / Phase A-B Voltage 27 Harmonic Phase Phase A-N / Phase A-B Voltage 28 Harmonic Phase Phase A-N / Phase A-B Voltage 29th Harmonic Phase Phase A-N / Phase A-B Voltage 30 Harmonic Phase Phase A-N / Phase A-B Voltage 31 Harmonic Phase Phase A-N / Phase A-B Voltage 32nd Harmonic Phase Phase A-N / Phase A-B Voltage 33 Harmonic Phase Phase A-N / Phase A-B Voltage 34th Harmonic Phase Phase A-N / Phase A-B Voltage 35th Harmonic Phase Phase A-N / Phase A-B Voltage 36 Harmonic Phase
th rd st th th th rd nd th th th th th th th th th th

Range +180 degree / -180 degree +180 degree / -180 degree +180 degree / -180 degree +180 degree / -180 degree +180 degree / -180 degree +180 degree / -180 degree +180 degree / -180 degree +180 degree / -180 degree +180 degree / -180 degree +180 degree / -180 degree +180 degree / -180 degree +180 degree / -180 degree +180 degree / -180 degree +180 degree / -180 degree +180 degree / -180 degree +180 degree / -180 degree +180 degree / -180 degree +180 degree / -180 degree +180 degree / -180 degree +180 degree / -180 degree +180 degree / -180 degree +180 degree / -180 degree +180 degree / -180 degree +180 degree / -180 degree +180 degree / -180 degree +180 degree / -180 degree +180 degree / -180 degree +180 degree / -180 degree +180 degree / -180 degree +180 degree / -180 degree +180 degree / -180 degree +180 degree / -180 degree +180 degree / -180 degree

DOC #: E107748

Chapter 5: Point List

Obj Var Index Line Description 30 50 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 50 50 50 50 50 50 50 50 50 50 50 4 1 4 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 1 1 1 1 1 1 1 1 1 1 1 1770 136 1771 1772 1773 1774 1775 1776 1777 1778 1779 1780 1781 1782 1783 1784 1785 1786 1787 1788 137 138 139 140 141 142 143 144 145 146 147 213 214 215 216 216 216 217 217 217 217 217 218 218 218 218 218 219 219 219 219 220 220 220 220 220 221 221 221 221 221 222 Voltage Phase Sequence Block Window Average Block Block Window Average Block Time Stamp Block Window Average Status Block Window Average VA Block Window Average VAR Block Window Average Watt Maximum Block Window Average VA Maximum Block Window Average Positive VAR Maximum Block Window Average Negative VAR Maximum Block Window Average Positive Watt Maximum Block Window Average Negative Watt Minimum Block Window Average VA Minimum Block Window Average Positive VAR Minimum Block Window Average Negative VAR Minimum Block Window Average Positive Watt Minimum Block Window Average Negative Watt Coincident Block Window Average VAR for Maximum Positive Watt Coincident Block Window Average VAR for Maximum Negative Watt Coincident Block Window Average VAR for Minimum Positive Watt Coincident Block Window Average VAR for Minimum Negative Watt Maximum Block Window Average VA Time Stamp Maximum Block Window Average Positive VAR Time Stamp Maximum Block Window Average Negative VAR Time Stamp Maximum Block Window Average Positive Watt Time Stamp Maximum Block Window Average Negative Watt Time Stamp Minimum Block Window Average VA Time Stamp Minimum Block Window Average Positive VAR Time Stamp Minimum Block Window Average Negative VAR Time Stamp Minimum Block Window Average Positive Watt Time Stamp Minimum Block Window Average Negative Watt Time Stamp Rolling Window Average Block Time Stamp +32768 VA / 0 VA +32768 VAR / -32768 VAR +32768 W / -32768 W +32768 VA / 0 VA +32768 VAR / 0 VAR 0 VAR / -32768 VAR +32768 W /0 W 0 W / -32768 W +32768 VA / 0 VA +32768 VAR / 0 VAR 0 VAR / -32768 VAR +32768 W /0 W 0 W / -32768 W +32768 VAR / -32768 VAR +32768 VAR / -32768 VAR +32768 VAR / -32768 VAR +32768 VAR / -32768 VAR 12/31/9999 23:59:59.999 12/31/9999 23:59:59.999 12/31/9999 23:59:59.999 12/31/9999 23:59:59.999 12/31/9999 23:59:59.999 12/31/9999 23:59:59.999 12/31/9999 23:59:59.999 12/31/9999 23:59:59.999 12/31/9999 23:59:59.999 12/31/9999 23:59:59.999 12/31/9999 23:59:59.999 1 VA sec 1 VAR sec 1 W sec 1 VA sec 1 VAR sec 1 VAR sec 1 W sec 1 W sec 1 VA sec 1 VAR sec 1 VAR sec 1 W sec 1 W sec 1 VAR sec 1 VAR sec 1 VAR sec 1 VAR sec 1 msec 1 msec 1 msec 1 msec 1 msec 1 msec 1 msec 1 msec 1 msec 1 msec 1 msec 12/31/9999 23:59:59.999 1 msec F10 F4 F4 F4 F4 F4 F4 F4 F4 F4 F4 F4 F4 F4 F4 F4 F4 F4 Range Units Type F9

Obj Var Index Line Description 20 20 20 20 20 30 50 50 50 50 50 50 50 50 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 5 5 5 5 5 4 1 1 1 1 1 1 1 1 4 4 4 4 3 3 3 3 3 3 3 3 3 3 3 3 3 3 69 70 71 72 73 1810 159 160 161 162 163 164 165 166 1811 1812 1813 1814 1815 1816 1817 1818 1819 1820 1821 1822 1823 1824 1825 1826 1827 1828 246 246 246 246 246 247 248 248 248 248 248 248 248 248 249 249 249 249 250 250 250 250 250 250 250 250 250 250 250 250 250 250 V t Phase A V2t Phase B V2t Phase B V t Phase C V2t Phase C Time of Use Status Time of Use Prior Season Start Time Time of Use Prior Season End Time Time of Use Prior Month Start Time Time of Use Prior Month End Time Time of Use Current Season Start Time Time of Use Current Season End Time Time of Use Current Month Start Time Time of Use Current Month End Time Time of Use Prior Season Average Select Time of Use Prior Month Average Select Time of Use Current Season Average Select Time of Use Current Month Average Select Time of Use Prior Season CT Ratio Numerator Time of Use Prior Season CT Ratio Denominator Time of Use Prior Season PT Ratio Numerator Time of Use Prior Season PT Ratio Denominator Time of Use Prior Month CT Ratio Numerator Time of Use Prior Month CT Ratio Denominator Time of Use Prior Month PT Ratio Numerator Time of Use Prior Month PT Ratio Denominator Time of Use Current Season CT Ratio Numerator Time of Use Current Season CT Ratio Denominator Time of Use Current Season PT Ratio Numerator Time of Use Current Season PT Ratio Denominator Time of Use Current Month CT Ratio Numerator Time of Use Current Month CT Ratio Denominator 12/31/9999 23:59:59.999 12/31/9999 23:59:59.999 12/31/9999 23:59:59.999 12/31/9999 23:59:59.999 12/31/9999 23:59:59.999 12/31/9999 23:59:59.999 12/31/9999 23:59:59.999 12/31/9999 23:59:59.999 1 msec 1 msec 1 msec 1 msec 1 msec 1 msec 1 msec 1 msec F16 F16 F16 F16 F17 F17 F17 F17 F17 F17 F17 F17 F17 F17 F17 F17 F17 F17
2 2

Range +4,294,967,295 V t / 0 V t +9,999,999,999,999,999 V2t / 0 V2t +4,294,967,295 V2t / 0 V2t +9,999,999,999,999,999 V t / 0 V t +4,294,967,295 V2t / 0 V2t Time of Use Period Time Stamp Block
2 2 2 2

Units 1Vt 232 V2t 1 V2t 232 V2t 1 V2t

Type F15 F15 F15 F15 F15 F10

Electro Industries/GaugeTech

DOC #: E107748

Chapter 5: Point List

Obj Var Index Line Description 30 30 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 30 30 30 30 30 30 50 50 50 50 3 3 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 3 3 3 3 3 3 1 1 1 1 1829 1830 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 1831 1832 1833 1834 1835 1836 167 168 169 170 250 250 251 251 251 251 251 251 251 251 251 251 251 251 251 251 251 251 251 251 251 251 252 252 252 252 253 253 254 254 254 254 Time of Use Current Month PT Ratio Numerator Time of Use Current Month PT Ratio Denominator Time of Use Prior Season Register 1 Block TOU Prior Season Reg 1 Received Watthour (Quadrant 1 + 4) +9,999,999,999,999,999 WH / 0 WH TOU Prior Season Reg 1 Received Watthour (Quadrant 1 + 4) TOU Prior Season Reg 1 VAhour (Quadrant 1) TOU Prior Season Reg 1 VAhour (Quadrant 1) TOU Prior Season Reg 1 VARhour (Quadrant 1) TOU Prior Season Reg 1 VARhour (Quadrant 1) TOU Prior Season Reg 1 VAhour (Quadrant 4) TOU Prior Season Reg 1 VAhour (Quadrant 4) TOU Prior Season Reg 1 VARhour (Quadrant 4) TOU Prior Season Reg 1 VARhour (Quadrant 4) TOU Prior Season Reg 1 Delivered Watthour (Quadrant 2 + 3) TOU Prior Season Reg 1 Delivered Watthour (Quadrant 2 + 3) TOU Prior Season Reg 1 VAhour (Quadrant 2) TOU Prior Season Reg 1 VAhour (Quadrant 2) TOU Prior Season Reg 1 VARhour (Quadrant 2) TOU Prior Season Reg 1 VARhour (Quadrant 2) TOU Prior Season Reg 1 VAhour (Quadrant 3) TOU Prior Season Reg 1 VAhour (Quadrant 3) TOU Prior Season Reg 1 VARhour (Quadrant 3) TOU Prior Season Reg 1 VARhour (Quadrant 3) TOU Prior Season Reg 1 Peak Demand Rcv. Watt (Quadrant 1 + 4) TOU Prior Season Reg 1 Peak Demand Dlv. Watt (Quadrant 2 + 3) TOU Prior Season Reg 1 Peak Demand Rcv. VAR (Quadrant 1 + 2) TOU Prior Season Reg 1 Peak Demand Dlv. VAR (Quadrant 3 + 4) TOU Prior Season Reg 1 Coin. Dmd. VAR to Peak Dmd. Rcv. Watt TOU Prior Season Reg 1 Coin. Dmd. VAR to Peak Dmd. Dlv. Watt TOU Prior Season Reg 1 Peak Demand Rcv. Watt (Q 1 + 4) Time Stamp TOU Prior Season Reg 1 Peak Demand Dlv. Watt (Q 2 + 3) Time Stamp TOU Prior Season Reg 1 Peak Demand Rcv. VAR (Q 1 + 2) Time Stamp TOU Prior Season Reg 1 Peak Demand Dlv. VAR (Q 3 + 4) Time Stamp +4,294,967,295 WH / 0 WH +9,999,999,999,999,999 VAH / 0 VAH +4,294,967,295 VAH / 0 VAH 0 VARH / -9,999,999,999,999,999 VARH 0 VARH / -4,294,967,295 VARH +9,999,999,999,999,999 VAH / 0 VAH +4,294,967,295 VAH / 0 VAH +9,999,999,999,999,999 VARH / 0 VARH +4,294,967,295 VARH / 0 VARH 0 WH / -9,999,999,999,999,999 WH 0 WH / -4,294,967,295 WH +9,999,999,999,999,999 VAH / 0 VAH +4,294,967,295 VAH / 0 VAH 0 VARH / -9,999,999,999,999,999 VARH 0 VARH / -4,294,967,295 VARH +9,999,999,999,999,999 VAH / 0 VAH +4,294,967,295 VAH / 0 VAH +9,999,999,999,999,999 VARH / 0 VARH +4,294,967,295 VARH / 0 VARH +32768 Watt / 0 Watt 0 Watt / -32768 Watt +32768 VAR / 0 VAR 0 VAR / -32768 VAR +32768 VAR/ -32768 VAR +32768 VAR / -32768 VAR 12/31/9999 23:59:59.999 12/31/9999 23:59:59.999 12/31/9999 23:59:59.999 12/31/9999 23:59:59.999 232 WH 1 WH 2 VAH 1 VAH 2 VARH 1 VARH 2 VAH 1 VAH 2 VARH 1 VARH 2 WH 1 WH 2 VAH 1 VAH 2 VARH 1 VARH 232 VAH 1 VAH 2 VARH 1 VARH 1 W sec 1 W sec 1 VAR sec 1 VAR sec 1 VAR sec 1 VAR sec 1 msec 1 msec 1 msec 1 msec
32 32 32 32 32 32 32 32

Range

Units

Type F17 F17 F15 F15 F15 F15 F15 F15 F15 F15 F15 F15 F15 F15 F15 F15 F15 F15 F15 F15 F15 F15 F4 F4 F4 F4 F4 F4

Electro Industries/GaugeTech

DOC #: E107748

Chapter 5: Point List

Obj Var Index Line Description Range Units 232 WH 1 WH 2 VAH 1 VAH 2 VARH 1 VARH 2 VAH 1 VAH 2 VARH 1 VARH 2 WH 1 WH 2 VAH 1 VAH 2 VARH 1 VARH 2 VAH 1 VAH 232 VARH 1 VARH 1 W sec 1 W sec 1 VAR sec 1 VAR sec 1 VAR sec 1 VAR sec 1 msec 1 msec 1 msec 1 msec 232 WH F15
32 32 32 32 32 32 32 32

Type

20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 30 30 30 30 30 30 50 50 50 50 20

5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 3 3 3 3 3 3 1 1 1 1 5

94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 1837 1838 1839 1840 1841 1842 171 172 173 174 114

255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 256 256 256 256 257 257 258 258 258 258 259

Time of Use Prior Season Register 2 Block TOU Prior Season Reg 2 Received Watthour (Quadrant 1 + 4) +9,999,999,999,999,999 WH / 0 WH TOU Prior Season Reg 2 Received Watthour (Quadrant 1 + 4) TOU Prior Season Reg 2 VAhour (Quadrant 1) TOU Prior Season Reg 2 VAhour (Quadrant 1) TOU Prior Season Reg 2 VARhour (Quadrant 1) TOU Prior Season Reg 2 VARhour (Quadrant 1) TOU Prior Season Reg 2 VAhour (Quadrant 4) TOU Prior Season Reg 2 VAhour (Quadrant 4) TOU Prior Season Reg 2 VARhour (Quadrant 4) TOU Prior Season Reg 2 VARhour (Quadrant 4) TOU Prior Season Reg 2 Delivered Watthour (Quadrant 2 + 3) TOU Prior Season Reg 2 Delivered Watthour (Quadrant 2 + 3) TOU Prior Season Reg 2 VAhour (Quadrant 2) TOU Prior Season Reg 2 VAhour (Quadrant 2) TOU Prior Season Reg 2 VARhour (Quadrant 2) TOU Prior Season Reg 2 VARhour (Quadrant 2) TOU Prior Season Reg 2 VAhour (Quadrant 3) TOU Prior Season Reg 2 VAhour (Quadrant 3) TOU Prior Season Reg 2 VARhour (Quadrant 3) TOU Prior Season Reg 2 VARhour (Quadrant 3) TOU Prior Season Reg 2 Peak Demand Rcv. Watt (Quadrant 1 + 4) TOU Prior Season Reg 2 Peak Demand Dlv. Watt (Quadrant 2 + 3) TOU Prior Season Reg 2 Peak Demand Rcv. VAR (Quadrant 1 + 2) TOU Prior Season Reg 2 Peak Demand Dlv. VAR (Quadrant 3 + 4) TOU Prior Season Reg 2 Coin. Dmd. VAR to Peak Dmd. Rcv. Watt TOU Prior Season Reg 2 Coin. Dmd. VAR to Peak Dmd. Dlv. Watt TOU Prior Season Reg 2 Peak Demand Rcv. Watt (Q 1 + 4) Time Stamp TOU Prior Season Reg 2 Peak Demand Dlv. Watt (Q 2 + 3) Time Stamp TOU Prior Season Reg 2 Peak Demand Rcv. VAR (Q 1 + 2) Time Stamp TOU Prior Season Reg 2 Peak Demand Dlv. VAR (Q 3 + 4) Time Stamp +4,294,967,295 WH / 0 WH +9,999,999,999,999,999 VAH / 0 VAH +4,294,967,295 VAH / 0 VAH 0 VARH / -9,999,999,999,999,999 VARH 0 VARH / -4,294,967,295 VARH +9,999,999,999,999,999 VAH / 0 VAH +4,294,967,295 VAH / 0 VAH +9,999,999,999,999,999 VARH / 0 VARH +4,294,967,295 VARH / 0 VARH 0 WH / -9,999,999,999,999,999 WH 0 WH / -4,294,967,295 WH +9,999,999,999,999,999 VAH / 0 VAH +4,294,967,295 VAH / 0 VAH 0 VARH / -9,999,999,999,999,999 VARH 0 VARH / -4,294,967,295 VARH +9,999,999,999,999,999 VAH / 0 VAH +4,294,967,295 VAH / 0 VAH +9,999,999,999,999,999 VARH / 0 VARH +4,294,967,295 VARH / 0 VARH +32768 Watt / 0 Watt 0 Watt / -32768 Watt +32768 VAR / 0 VAR 0 VAR / -32768 VAR +32768 VAR/ -32768 VAR +32768 VAR / -32768 VAR 12/31/9999 23:59:59.999 12/31/9999 23:59:59.999 12/31/9999 23:59:59.999 12/31/9999 23:59:59.999

F15 F15 F15 F15 F15 F15 F15 F15 F15 F15 F15 F15 F15 F15 F15 F15 F15 F15 F15 F15 F4 F4 F4 F4 F4 F4

Time of Use Prior Season Reg 3 Block TOU Prior Season Reg 3 Received Watthour (Quadrant 1 + 4) +9,999,999,999,999,999 WH / 0 WH

Electro Industries/GaugeTech

DOC #: E107748

100

Chapter 5: Point List

Obj Var Index Line Description 50 50 50 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 30 30 30 30 30 30 50 50 50 1 1 1 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 3 3 3 3 3 3 1 1 1 228 229 230 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 1927 1928 1929 1930 1931 1932 231 232 233 314 314 314 315 315 315 315 315 315 315 315 315 315 315 315 315 315 315 315 315 315 315 315 316 316 316 316 317 317 318 318 318 TOU Prior Month Reg 7 Peak Demand Dlv. Watt (Q 2 + 3) Time Stamp TOU Prior Month Reg 7 Peak Demand Rcv. VAR (Q 1 + 2) Time Stamp TOU Prior Month Reg 7 Peak Demand Dlv. VAR (Q 3 + 4) Time Stamp Range 12/31/9999 23:59:59.999 12/31/9999 23:59:59.999 12/31/9999 23:59:59.999 Units 1 msec 1 msec 1 msec 232 WH 1 WH 2 VAH 1 VAH 232 VARH 1 VARH 2 VAH 1 VAH 2 VARH 1 VARH 2 WH 1 WH 2 VAH 1 VAH 2 VARH 1 VARH 2 VAH 1 VAH 2 VARH 1 VARH 1 W sec 1 W sec 1 VAR sec 1 VAR sec 1 VAR sec 1 VAR sec 1 msec 1 msec 1 msec
32 32 32 32 32 32 32 32

Type

Time of Use Prior Month Register 8 Block TOU Prior Month Reg 8 Received Watthour (Quadrant 1 + 4) +9,999,999,999,999,999 WH / 0 WH TOU Prior Month Reg 8 Received Watthour (Quadrant 1 + 4) TOU Prior Month Reg 8 VAhour (Quadrant 1) TOU Prior Month Reg 8 VAhour (Quadrant 1) TOU Prior Month Reg 8 VARhour (Quadrant 1) TOU Prior Month Reg 8 VARhour (Quadrant 1) TOU Prior Month Reg 8 VAhour (Quadrant 4) TOU Prior Month Reg 8 VAhour (Quadrant 4) TOU Prior Month Reg 8 VARhour (Quadrant 4) TOU Prior Month Reg 8 VARhour (Quadrant 4) TOU Prior Month Reg 8 Delivered Watthour (Quadrant 2 + 3) TOU Prior Month Reg 8 Delivered Watthour (Quadrant 2 + 3) TOU Prior Month Reg 8 VAhour (Quadrant 2) TOU Prior Month Reg 8 VAhour (Quadrant 2) TOU Prior Month Reg 8 VARhour (Quadrant 2) TOU Prior Month Reg 8 VARhour (Quadrant 2) TOU Prior Month Reg 8 VAhour (Quadrant 3) TOU Prior Month Reg 8 VAhour (Quadrant 3) TOU Prior Month Reg 8 VARhour (Quadrant 3) TOU Prior Month Reg 8 VARhour (Quadrant 3) TOU Prior Month Reg 8 Peak Demand Rcv. Watt (Quadrant 1 + 4) TOU Prior Month Reg 8 Peak Demand Dlv. Watt (Quadrant 2 + 3) TOU Prior Month Reg 8 Peak Demand Rcv. VAR (Quadrant 1 + 2) TOU Prior Month Reg 8 Peak Demand Dlv. VAR (Quadrant 3 + 4) TOU Prior Month Reg 8 Coin. Dmd. VAR to Peak Dmd. Rcv. Watt TOU Prior Month Reg 8 Coin. Dmd. VAR to Peak Dmd. Dlv. Watt TOU Prior Month Reg 8 Peak Demand Rcv. Watt (Q 1 + 4) Time Stamp TOU Prior Month Reg 8 Peak Demand Dlv. Watt (Q 2 + 3) Time Stamp TOU Prior Month Reg 8 Peak Demand Rcv. VAR (Q 1 + 2) Time Stamp +4,294,967,295 WH / 0 WH +9,999,999,999,999,999 VAH / 0 VAH +4,294,967,295 VAH / 0 VAH 0 VARH / -9,999,999,999,999,999 VARH 0 VARH / -4,294,967,295 VARH +9,999,999,999,999,999 VAH / 0 VAH +4,294,967,295 VAH / 0 VAH +9,999,999,999,999,999 VARH / 0 VARH +4,294,967,295 VARH / 0 VARH 0 WH / -9,999,999,999,999,999 WH 0 WH / -4,294,967,295 WH +9,999,999,999,999,999 VAH / 0 VAH +4,294,967,295 VAH / 0 VAH 0 VARH / -9,999,999,999,999,999 VARH 0 VARH / -4,294,967,295 VARH +9,999,999,999,999,999 VAH / 0 VAH +4,294,967,295 VAH / 0 VAH +9,999,999,999,999,999 VARH / 0 VARH +4,294,967,295 VARH / 0 VARH +32768 Watt / 0 Watt 0 Watt / -32768 Watt +32768 VAR / 0 VAR 0 VAR / -32768 VAR +32768 VAR/ -32768 VAR +32768 VAR / -32768 VAR 12/31/9999 23:59:59.999 12/31/9999 23:59:59.999 12/31/9999 23:59:59.999

F15 F15 F15 F15 F15 F15 F15 F15 F15 F15 F15 F15 F15 F15 F15 F15 F15 F15 F15 F15 F4 F4 F4 F4 F4 F4

Electro Industries/GaugeTech

DOC #: E107748

101

Chapter 5: Point Lis

Obj Var Index Line Description 50 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 30 30 30 30 30 30 50 50 50 50 1 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 3 3 3 3 3 3 1 1 1 1 234 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 1933 1934 1935 1936 1937 1938 235 236 237 238 318 319 319 319 319 319 319 319 319 319 319 319 319 319 319 319 319 319 319 319 319 320 320 320 320 321 321 322 322 322 322 TOU Prior Month Reg 8 Peak Demand Dlv. VAR (Q 3 + 4) Time Stamp Range 12/31/9999 23:59:59.999 Units 1 msec 232 WH 1 WH 2 VAH 1 VAH 2 VARH 1 VARH 232 VAH 1 VAH 2 VARH 1 VARH 2 WH 1 WH 2 VAH 1 VAH 2 VARH 1 VARH 2 VAH 1 VAH 2 VARH 1 VARH 1 W sec 1 W sec 1 VAR sec 1 VAR sec 1 VAR sec 1 VAR sec 1 msec 1 msec 1 msec 1 msec
32 32 32 32 32 32 32 32

Type

Time of Use Prior Month Total Block TOU Prior Month Total Received Watthour (Quadrant 1 + 4) +9,999,999,999,999,999 WH / 0 WH TOU Prior Month Total Received Watthour (Quadrant 1 + 4) TOU Prior Month Total VAhour (Quadrant 1) TOU Prior Month Total VAhour (Quadrant 1) TOU Prior Month Total VARhour (Quadrant 1) TOU Prior Month Total VARhour (Quadrant 1) TOU Prior Month Total VAhour (Quadrant 4) TOU Prior Month Total VAhour (Quadrant 4) TOU Prior Month Total VARhour (Quadrant 4) TOU Prior Month Total VARhour (Quadrant 4) TOU Prior Month Total Delivered Watthour (Quadrant 2 + 3) TOU Prior Month Total Delivered Watthour (Quadrant 2 + 3) TOU Prior Month Total VAhour (Quadrant 2) TOU Prior Month Total VAhour (Quadrant 2) TOU Prior Month Total VARhour (Quadrant 2) TOU Prior Month Total VARhour (Quadrant 2) TOU Prior Month Total VAhour (Quadrant 3) TOU Prior Month Total VAhour (Quadrant 3) TOU Prior Month Total VARhour (Quadrant 3) TOU Prior Month Total VARhour (Quadrant 3) TOU Prior Month Total Peak Demand Rcv. Watt (Quadrant 1 + 4) TOU Prior Month Total Peak Demand Dlv. Watt (Quadrant 2 + 3) TOU Prior Month Total Peak Demand Rcv. VAR (Quadrant 1 + 2) TOU Prior Month Total Peak Demand Dlv. VAR (Quadrant 3 + 4) TOU Prior Month Total Coin. Dmd. VAR to Peak Dmd. Rcv. Watt TOU Prior Month Total Coin. Dmd. VAR to Peak Dmd. Dlv. Watt TOU Prior Month Total Peak Demand Rcv. Watt (Q 1 + 4) Time Stamp TOU Prior Month Total Peak Demand Dlv. Watt (Q 2 + 3) Time Stamp TOU Prior Month Total Peak Demand Rcv. VAR (Q 1 + 2) Time Stamp TOU Prior Month Total Peak Demand Dlv. VAR (Q 3 + 4) Time Stamp +4,294,967,295 WH / 0 WH +9,999,999,999,999,999 VAH / 0 VAH +4,294,967,295 VAH / 0 VAH 0 VARH / -9,999,999,999,999,999 VARH 0 VARH / -4,294,967,295 VARH +9,999,999,999,999,999 VAH / 0 VAH +4,294,967,295 VAH / 0 VAH +9,999,999,999,999,999 VARH / 0 VARH +4,294,967,295 VARH / 0 VARH 0 WH / -9,999,999,999,999,999 WH 0 WH / -4,294,967,295 WH +9,999,999,999,999,999 VAH / 0 VAH +4,294,967,295 VAH / 0 VAH 0 VARH / -9,999,999,999,999,999 VARH 0 VARH / -4,294,967,295 VARH +9,999,999,999,999,999 VAH / 0 VAH +4,294,967,295 VAH / 0 VAH +9,999,999,999,999,999 VARH / 0 VARH +4,294,967,295 VARH / 0 VARH +32768 Watt / 0 Watt 0 Watt / -32768 Watt +32768 VAR / 0 VAR 0 VAR / -32768 VAR +32768 VAR/ -32768 VAR +32768 VAR / -32768 VAR 12/31/9999 23:59:59.999 12/31/9999 23:59:59.999 12/31/9999 23:59:59.999 12/31/9999 23:59:59.999

F15 F15 F15 F15 F15 F15 F15 F15 F15 F15 F15 F15 F15 F15 F15 F15 F15 F15 F15 F15 F4 F4 F4 F4 F4 F4

Time of Use Current Season Register 1 Block

Electro Industries/GaugeTech

DOC #: E107748

102

Chapter 5: Point List

Obj Var Index Line Description 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 30 30 30 30 30 30 50 50 50 50 20 20 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 3 3 3 3 3 3 1 1 1 1 5 5 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 1939 1940 1941 1942 1943 1944 239 240 241 242 454 455 323 323 323 323 323 323 323 323 323 323 323 323 323 323 323 323 323 323 323 323 324 324 324 324 325 325 326 326 326 326 327 327 TOU Current Season Reg 1 Received Watthour (Quadrant 1 + 4) TOU Current Season Reg 1 Received Watthour (Quadrant 1 + 4) TOU Current Season Reg 1 VAhour (Quadrant 1) TOU Current Season Reg 1 VAhour (Quadrant 1) TOU Current Season Reg 1 VARhour (Quadrant 1) TOU Current Season Reg 1 VARhour (Quadrant 1) TOU Current Season Reg 1 VAhour (Quadrant 4) TOU Current Season Reg 1 VAhour (Quadrant 4) TOU Current Season Reg 1 VARhour (Quadrant 4) TOU Current Season Reg 1 VARhour (Quadrant 4) TOU Current Season Reg 1 Delivered Watthour (Quadrant 2 + 3) TOU Current Season Reg 1 Delivered Watthour (Quadrant 2 + 3) TOU Current Season Reg 1 VAhour (Quadrant 2) TOU Current Season Reg 1 VAhour (Quadrant 2) TOU Current Season Reg 1 VARhour (Quadrant 2) TOU Current Season Reg 1 VARhour (Quadrant 2) TOU Current Season Reg 1 VAhour (Quadrant 3) TOU Current Season Reg 1 VAhour (Quadrant 3) TOU Current Season Reg 1 VARhour (Quadrant 3) TOU Current Season Reg 1 VARhour (Quadrant 3) TOU Current Season Reg 1 Peak Demand Rcv. Watt (Quadrant 1 + 4) TOU Current Season Reg 1 Peak Demand Dlv. Watt (Quadrant 2 + 3) TOU Current Season Reg 1 Peak Demand Rcv. VAR (Quadrant 1 + 2) TOU Current Season Reg 1 Peak Demand Dlv. VAR (Quadrant 3 + 4) TOU Current Season Reg 1 Coin. Dmd. VAR to Peak Dmd. Rcv. Watt TOU Current Season Reg 1 Coin. Dmd. VAR to Peak Dmd. Dlv. Watt TOU Current Season Reg 1 Peak Demand Rcv. Watt (Q 1 + 4) Time Stamp TOU Current Season Reg 1 Peak Demand Dlv. Watt (Q 2 + 3) Time Stamp TOU Current Season Reg 1 Peak Demand Rcv. VAR (Q 1 + 2) Time Stamp TOU Current Season Reg 1 Peak Demand Dlv. VAR (Q 3 + 4) Time Stamp Range +9,999,999,999,999,999 WH / 0 WH +4,294,967,295 WH / 0 WH +9,999,999,999,999,999 VAH / 0 VAH +4,294,967,295 VAH / 0 VAH 0 VARH / -9,999,999,999,999,999 VARH 0 VARH / -4,294,967,295 VARH +9,999,999,999,999,999 VAH / 0 VAH +4,294,967,295 VAH / 0 VAH +9,999,999,999,999,999 VARH / 0 VARH +4,294,967,295 VARH / 0 VARH 0 WH / -9,999,999,999,999,999 WH 0 WH / -4,294,967,295 WH +9,999,999,999,999,999 VAH / 0 VAH +4,294,967,295 VAH / 0 VAH 0 VARH / -9,999,999,999,999,999 VARH 0 VARH / -4,294,967,295 VARH +9,999,999,999,999,999 VAH / 0 VAH +4,294,967,295 VAH / 0 VAH +9,999,999,999,999,999 VARH / 0 VARH +4,294,967,295 VARH / 0 VARH +32768 Watt / 0 Watt 0 Watt / -32768 Watt +32768 VAR / 0 VAR 0 VAR / -32768 VAR +32768 VAR/ -32768 VAR +32768 VAR / -32768 VAR 12/31/9999 23:59:59.999 12/31/9999 23:59:59.999 12/31/9999 23:59:59.999 12/31/9999 23:59:59.999 Units 2 WH 1 WH 2 VAH 1 VAH 2 VARH 1 VARH 2 VAH 1 VAH 232 VARH 1 VARH 2 WH 1 WH 2 VAH 1 VAH 2 VARH 1 VARH 2 VAH 1 VAH 2 VARH 1 VARH 1 W sec 1 W sec 1 VAR sec 1 VAR sec 1 VAR sec 1 VAR sec 1 msec 1 msec 1 msec 1 msec 232 WH 1 WH F15 F15
32 32 32 32 32 32 32 32 32

Type F15 F15 F15 F15 F15 F15 F15 F15 F15 F15 F15 F15 F15 F15 F15 F15 F15 F15 F15 F15 F4 F4 F4 F4 F4 F4

Time of Use Current Season Register 2 Block TOU Current Season Reg 2 Received Watthour (Quadrant 1 + 4) +9,999,999,999,999,999 WH / 0 WH TOU Current Season Reg 2 Received Watthour (Quadrant 1 + 4) +4,294,967,295 WH / 0 WH

387 387 387 387 387 387 387 387 387 387 387 387 387 387 387 387 387 387 387 387 388 388 388 388 389 389 390 390 390 390 391

Time of Use Current Month Register 8 Block TOU Current Month Reg 8 Received Watthour (Quadrant 1 + 4) +9,999,999,999,999,999 WH / 0 WH TOU Current Month Reg 8 Received Watthour (Quadrant 1 + 4) TOU Current Month Reg 8 VAhour (Quadrant 1) TOU Current Month Reg 8 VAhour (Quadrant 1) TOU Current Month Reg 8 VARhour (Quadrant 1) TOU Current Month Reg 8 VARhour (Quadrant 1) TOU Current Month Reg 8 VAhour (Quadrant 4) TOU Current Month Reg 8 VAhour (Quadrant 4) TOU Current Month Reg 8 VARhour (Quadrant 4) TOU Current Month Reg 8 VARhour (Quadrant 4) TOU Current Month Reg 8 Delivered Watthour (Quadrant 2 + 3) TOU Current Month Reg 8 Delivered Watthour (Quadrant 2 + 3) TOU Current Month Reg 8 VAhour (Quadrant 2) TOU Current Month Reg 8 VAhour (Quadrant 2) TOU Current Month Reg 8 VARhour (Quadrant 2) TOU Current Month Reg 8 VARhour (Quadrant 2) TOU Current Month Reg 8 VAhour (Quadrant 3) TOU Current Month Reg 8 VAhour (Quadrant 3) TOU Current Month Reg 8 VARhour (Quadrant 3) TOU Current Month Reg 8 VARhour (Quadrant 3) TOU Current Month Reg 8 Peak Demand Rcv. Watt (Quadrant 1 + 4) TOU Current Month Reg 8 Peak Demand Dlv. Watt (Quadrant 2 + 3) TOU Current Month Reg 8 Peak Demand Rcv. VAR (Quadrant 1 + 2) TOU Current Month Reg 8 Peak Demand Dlv. VAR (Quadrant 3 + 4) TOU Current Month Reg 8 Coin. Dmd. VAR to Peak Dmd. Rcv. Watt TOU Current Month Reg 8 Coin. Dmd. VAR to Peak Dmd. Dlv. Watt TOU Current Month Reg 8 Peak Demand Rcv. Watt (Q 1 + 4) Time Stamp TOU Current Month Reg 8 Peak Demand Dlv. Watt (Q 2 + 3) Time Stamp TOU Current Month Reg 8 Peak Demand Rcv. VAR (Q 1 + 2) Time Stamp TOU Current Month Reg 8 Peak Demand Dlv. VAR (Q 3 + 4) Time Stamp +4,294,967,295 WH / 0 WH +9,999,999,999,999,999 VAH / 0 VAH +4,294,967,295 VAH / 0 VAH 0 VARH / -9,999,999,999,999,999 VARH 0 VARH / -4,294,967,295 VARH +9,999,999,999,999,999 VAH / 0 VAH +4,294,967,295 VAH / 0 VAH +9,999,999,999,999,999 VARH / 0 VARH +4,294,967,295 VARH / 0 VARH 0 WH / -9,999,999,999,999,999 WH 0 VARH / -4,294,967,295 VARH +9,999,999,999,999,999 VAH / 0 VAH +4,294,967,295 VAH / 0 VAH 0 VARH / -9,999,999,999,999,999 VARH 0 VARH / -4,294,967,295 VARH +9,999,999,999,999,999 VAH / 0 VAH +4,294,967,295 VAH / 0 VAH +9,999,999,999,999,999 VARH / 0 VARH +4,294,967,295 VARH / 0 VARH +32768 Watt / 0 Watt 0 Watt / -32768 Watt +32768 VAR / 0 VAR 0 VAR / -32768 VAR +32768 VAR/ -32768 VAR +32768 VAR / -32768 VAR 12/31/9999 23:59:59.999 12/31/9999 23:59:59.999 12/31/9999 23:59:59.999 12/31/9999 23:59:59.999

F15 F15 F15 F15 F15 F15 F15 F15 F15 F15 F15 F15 F15 F15 F15 F15 F15 F15 F15 F15 F4 F4 F4 F4 F4 F4

Time of Use Current Month Total Block TOU Current Month Total Received Watthour (Quadrant 1 + 4) +9,999,999,999,999,999 WH / 0 WH

Electro Industries/GaugeTech

DOC #: E107748

118

Chapter 5: Point List

Obj Var Index Line Description 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 30 30 30 30 30 30 50 50 50 50 50 20 20 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 3 3 3 3 3 3 1 1 1 1 1 5 5 775 776 777 778 779 780 781 782 783 784 785 786 787 788 789 790 791 792 793 2041 2042 2043 2044 2045 2046 307 308 309 310 311 794 795 391 391 391 391 391 391 391 391 391 391 391 391 391 391 391 391 391 391 391 392 392 392 392 393 393 394 394 394 394 399 400 400 TOU Current Month Total Received Watthour (Quadrant 1 + 4) TOU Current Month Total VAhour (Quadrant 1) TOU Current Month Total VAhour (Quadrant 1) TOU Current Month Total VARhour (Quadrant 1) TOU Current Month Total VARhour (Quadrant 1) TOU Current Month Total VAhour (Quadrant 4) TOU Current Month Total VAhour (Quadrant 4) TOU Current Month Total VARhour (Quadrant 4) TOU Current Month Total VARhour (Quadrant 4) TOU Current Month Total Delivered Watthour (Quadrant 2 + 3) TOU Current Month Total Delivered Watthour (Quadrant 2 + 3) TOU Current Month Total VAhour (Quadrant 2) TOU Current Month Total VAhour (Quadrant 2) TOU Current Month Total VARhour (Quadrant 2) TOU Current Month Total VARhour (Quadrant 2) TOU Current Month Total VAhour (Quadrant 3) TOU Current Month Total VAhour (Quadrant 3) TOU Current Month Total VARhour (Quadrant 3) TOU Current Month Total VARhour (Quadrant 3) TOU Current Month Total Peak Demand Rcv. Watt (Quadrant 1 + 4) TOU Current Month Total Peak Demand Dlv. Watt (Quadrant 2 + 3) TOU Current Month Total Peak Demand Rcv. VAR (Quadrant 1 + 2) TOU Current Month Total Peak Demand Dlv. VAR (Quadrant 3 + 4) TOU Current Month Total Coin. Dmd. VAR to Peak Dmd. Rcv. Watt TOU Current Month Total Coin. Dmd. VAR to Peak Dmd. Dlv. Watt TOU Current Month Total Peak Demand Rcv. Watt (Q 1 + 4) Time Stamp TOU Current Month Total Peak Demand Dlv. Watt (Q 2 + 3) Time Stamp TOU Current Month Total Peak Demand Rcv. VAR (Q 1 + 2) Time Stamp TOU Current Month Total Peak Demand Dlv. VAR (Q 3 + 4) Time Stamp Internal Input Pulse Accumulation Block Time Stamp Scaled Pulse Accumulation Internal Input 1 Scaled Pulse Accumulation Internal Input 1 Range +4,294,967,295 WH / 0 WH +9,999,999,999,999,999 VAH / 0 VAH +4,294,967,295 VAH / 0 VAH 0 VARH / -9,999,999,999,999,999 VARH 0 VARH / -4,294,967,295 VARH +9,999,999,999,999,999 VAH / 0 VAH +4,294,967,295 VAH / 0 VAH +9,999,999,999,999,999 VARH / 0 VARH +4,294,967,295 VARH / 0 VARH 0 WH / -9,999,999,999,999,999 WH 0 WH / -4,294,967,295 WH +9,999,999,999,999,999 VAH / 0 VAH +4,294,967,295 VAH / 0 VAH 0 VARH / -9,999,999,999,999,999 VARH 0 VARH / -4,294,967,295 VARH +9,999,999,999,999,999 VAH / 0 VAH +4,294,967,295 VAH / 0 VAH +9,999,999,999,999,999 VARH / 0 VARH +4,294,967,295 VARH / 0 VARH +32768 Watt / 0 Watt 0 Watt / -32768 Watt +32768 VAR / 0 VAR 0 VAR / -32768 VAR +32768 VAR/ -32768 VAR +32768 VAR / -32768 VAR 12/31/9999 23:59:59.999 12/31/9999 23:59:59.999 12/31/9999 23:59:59.999 12/31/9999 23:59:59.999 12/31/9999 23:59:59.999 18,446,744,073,709,551,615 / 0 4,294,967,295 / 0 Units 1 WH 2 VAH 1 VAH 2 VARH 1 VARH 2 VAH 1 VAH 2 VARH 1 VARH 2 WH 1 WH 2 VAH 1 VAH 2 VARH 1 VARH 2 VAH 1 VAH 2 VARH 1 VARH 1 W sec 1 W sec 1 VAR sec 1 VAR sec 1 VAR sec 1 VAR sec 1 msec 1 msec 1 msec 1 msec 1 msec 232 Unit 1 Unit F15 F15
32 32 32 32 32 32 32 32 32

Type F15 F15 F15 F15 F15 F15 F15 F15 F15 F15 F15 F15 F15 F15 F15 F15 F15 F15 F15 F4 F4 F4 F4 F4 F4

Internal Input Pulse Accumulation Block

Electro Industries/GaugeTech

DOC #: E107748

119

Chapter 5: Point List

Obj Var Index Line Description 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 50 30 20 20 20 20 20 20 20 20 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 1 4 5 5 5 5 5 5 5 5 796 797 798 799 800 801 802 803 804 805 806 807 808 809 810 811 812 813 814 815 816 817 312 2047 818 819 820 821 822 823 824 825 400 400 400 400 400 400 400 400 400 400 400 400 400 400 401 401 401 401 401 401 401 401 402 403 404 404 404 404 404 404 404 404 Scaled Pulse Accumulation Internal Input 2 Scaled Pulse Accumulation Internal Input 2 Scaled Pulse Accumulation Internal Input 3 Scaled Pulse Accumulation Internal Input 3 Scaled Pulse Accumulation Internal Input 4 Scaled Pulse Accumulation Internal Input 4 Scaled Pulse Accumulation Internal Input 5 Scaled Pulse Accumulation Internal Input 5 Scaled Pulse Accumulation Internal Input 6 Scaled Pulse Accumulation Internal Input 6 Scaled Pulse Accumulation Internal Input 7 Scaled Pulse Accumulation Internal Input 7 Scaled Pulse Accumulation Internal Input 8 Scaled Pulse Accumulation Internal Input 8 Scaled Pulse Accumulation Aggregation 1 Scaled Pulse Accumulation Aggregation 1 Scaled Pulse Accumulation Aggregation 2 Scaled Pulse Accumulation Aggregation 2 Scaled Pulse Accumulation Aggregation 3 Scaled Pulse Accumulation Aggregation 3 Scaled Pulse Accumulation Aggregation 4 Scaled Pulse Accumulation Aggregation 4 Pulse Accumulation Block Window Average / Maximum Block Time Stamp Pulse Accumulation Block Window Average / Maximum Block Status Block Window Average Internal Input 1 Block Window Average Internal Input 1 Block Window Average Internal Input 2 Block Window Average Internal Input 2 Block Window Average Internal Input 3 Block Window Average Internal Input 3 Block Window Average Internal Input 4 Block Window Average Internal Input 4 18,446,744,073,709,551,615 / 0 4,294,967,295 / 0 18,446,744,073,709,551,615 / 0 4,294,967,295 / 0 18,446,744,073,709,551,615 / 0 4,294,967,295 / 0 18,446,744,073,709,551,615 / 0 4,294,967,295 / 0 232 Unit 1 Unit 2 Unit 1 Unit 232 Unit 1 Unit 232 Unit 1 Unit
32

Range 18,446,744,073,709,551,615 / 0 4,294,967,295 / 0 18,446,744,073,709,551,615 / 0 4,294,967,295 / 0 18,446,744,073,709,551,615 / 0 4,294,967,295 / 0 18,446,744,073,709,551,615 / 0 4,294,967,295 / 0 18,446,744,073,709,551,615 / 0 4,294,967,295 / 0 18,446,744,073,709,551,615 / 0 4,294,967,295 / 0 18,446,744,073,709,551,615 / 0 4,294,967,295 / 0 18,446,744,073,709,551,615 / 0 4,294,967,295 / 0 18,446,744,073,709,551,615 / 0 4,294,967,295 / 0 18,446,744,073,709,551,615 / 0 4,294,967,295 / 0 18,446,744,073,709,551,615 / 0 4,294,967,295 / 0 12/31/9999 23:59:59.999

Units 2 Unit 1 Unit 232 Unit 1 Unit 232 Unit 1 Unit 232 Unit 1 Unit 2 Unit 1 Unit 232 Unit 1 Unit 232 Unit 1 Unit 232 Unit 1 Unit 2 Unit 1 Unit 232 Unit 1 Unit 232 Unit 1 Unit 1 msec
32 32 32

Type F15 F15 F15 F15 F15 F15 F15 F15 F15 F15 F15 F15 F15 F15 F15 F15 F15 F15 F15 F15 F15 F15

Pulse Accumulation Block Window Average / Maximum Block F10 F18 F18 F18 F18 F18 F18 F18 F18

Electro Industries/GaugeTech

DOC #: E107748

120

Chapter 5: Point List

Obj Var Index Line Description 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 826 827 828 829 830 831 832 833 834 835 836 837 838 839 840 841 842 843 844 845 846 847 848 849 850 851 852 853 854 855 856 857 858 404 404 404 404 404 404 404 404 405 405 405 405 405 405 405 405 406 406 406 406 406 406 406 406 406 406 406 406 406 406 406 406 407 Block Window Average Internal Input 5 Block Window Average Internal Input 5 Block Window Average Internal Input 6 Block Window Average Internal Input 6 Block Window Average Internal Input 7 Block Window Average Internal Input 7 Block Window Average Internal Input 8 Block Window Average Internal Input 8 Block Window Average Aggregation 1 Block Window Average Aggregation 1 Block Window Average Aggregation 2 Block Window Average Aggregation 2 Block Window Average Aggregation 3 Block Window Average Aggregation 3 Block Window Average Aggregation 4 Block Window Average Aggregation 4 Maximum Block Window Average Internal Input 1 Maximum Block Window Average Internal Input 1 Maximum Block Window Average Internal Input 2 Maximum Block Window Average Internal Input 2 Maximum Block Window Average Internal Input 3 Maximum Block Window Average Internal Input 3 Maximum Block Window Average Internal Input 4 Maximum Block Window Average Internal Input 4 Maximum Block Window Average Internal Input 5 Maximum Block Window Average Internal Input 5 Maximum Block Window Average Internal Input 6 Maximum Block Window Average Internal Input 6 Maximum Block Window Average Internal Input 7 Maximum Block Window Average Internal Input 7 Maximum Block Window Average Internal Input 8 Maximum Block Window Average Internal Input 8 Maximum Block Window Average Aggregation 1 Range 18,446,744,073,709,551,615 / 0 4,294,967,295 / 0 18,446,744,073,709,551,615 / 0 4,294,967,295 / 0 18,446,744,073,709,551,615 / 0 4,294,967,295 / 0 18,446,744,073,709,551,615 / 0 4,294,967,295 / 0 18,446,744,073,709,551,615 / 0 4,294,967,295 / 0 18,446,744,073,709,551,615 / 0 4,294,967,295 / 0 18,446,744,073,709,551,615 / 0 4,294,967,295 / 0 18,446,744,073,709,551,615 / 0 4,294,967,295 / 0 18,446,744,073,709,551,615 / 0 4,294,967,295 / 0 18,446,744,073,709,551,615 / 0 4,294,967,295 / 0 18,446,744,073,709,551,615 / 0 4,294,967,295 / 0 18,446,744,073,709,551,615 / 0 4,294,967,295 / 0 18,446,744,073,709,551,615 / 0 4,294,967,295 / 0 18,446,744,073,709,551,615 / 0 4,294,967,295 / 0 18,446,744,073,709,551,615 / 0 4,294,967,295 / 0 18,446,744,073,709,551,615 / 0 4,294,967,295 / 0 18,446,744,073,709,551,615 / 0 Units 2 Unit 1 Unit 232 Unit 1 Unit 232 Unit 1 Unit 232 Unit 1 Unit 2 Unit 1 Unit 232 Unit 1 Unit 232 Unit 1 Unit 232 Unit 1 Unit 2 Unit 1 Unit 232 Unit 1 Unit 232 Unit 1 Unit 232 Unit 1 Unit 2 Unit 1 Unit 232 Unit 1 Unit 232 Unit 1 Unit 232 Unit 1 Unit 2 Unit
32 32 32 32 32

Type F18 F18 F18 F18 F18 F18 F18 F18 F18 F18 F18 F18 F18 F18 F18 F18 F18 F18 F18 F18 F18 F18 F18 F18 F18 F18 F18 F18 F18 F18 F18 F18 F18

Electro Industries/GaugeTech

DOC #: E107748

121

Chapter 5: Point List

Obj Var Index Line Description 20 20 20 20 20 20 20 50 50 50 50 50 50 50 50 50 50 50 50 30 30 30 30 30 30 30 30 30 30 30 30 5 5 5 5 5 5 5 1 1 1 1 1 1 1 1 1 1 1 1 4 4 4 4 4 4 4 4 4 4 4 4 859 860 861 862 863 864 865 313 314 315 316 317 318 319 320 321 322 323 324 2048 2049 2050 2051 2052 2053 2054 2055 2056 2057 2058 2059 407 407 407 407 407 407 407 408 408 408 408 408 408 408 408 409 409 409 409 410 411 411 411 411 411 411 411 411 412 412 412 Maximum Block Window Average Aggregation 1 Maximum Block Window Average Aggregation 2 Maximum Block Window Average Aggregation 2 Maximum Block Window Average Aggregation 3 Maximum Block Window Average Aggregation 3 Maximum Block Window Average Aggregation 4 Maximum Block Window Average Aggregation 4 Maximum Block Window Average Internal Input 1 Time Stamp Maximum Block Window Average Internal Input 2 Time Stamp Maximum Block Window Average Internal Input 3 Time Stamp Maximum Block Window Average Internal Input 4 Time Stamp Maximum Block Window Average Internal Input 5 Time Stamp Maximum Block Window Average Internal Input 6 Time Stamp Maximum Block Window Average Internal Input 7 Time Stamp Maximum Block Window Average Internal Input 8 Time Stamp Maximum Block Window Average Aggregation 1 Time Stamp Maximum Block Window Average Aggregation 2 Time Stamp Maximum Block Window Average Aggregation 3 Time Stamp Maximum Block Window Average Aggregation 4 Time Stamp Temperature Meter Internal Temperature Analog Input Block Analog Input 1, Module 1 Analog Input 2, Module 1 Analog Input 3, Module 1 Analog Input 4, Module 1 Analog Input 5, Module 1 Analog Input 6, Module 1 Analog Input 7, Module 1 Analog Input 8, Module 1 Analog Input 1, Module 2 Analog Input 2, Module 2 Analog Input 3, Module 2 +327% / -327% +327% / -327% +327% / -327% +327% / -327% +327% / -327% +327% / -327% +327% / -327% +327% / -327% +327% / -327% +327% / -327% +327% / -327% 0.01% 0.01% 0.01% 0.01% 0.01% 0.01% 0.01% 0.01% 0.01% 0.01% 0.01% F7 F7 F7 F7 F7 F7 F7 F7 F7 F7 F7 +327 C / -327 C 0.01 degree C F19 Range 4,294,967,295 / 0 18,446,744,073,709,551,615 / 0 4,294,967,295 / 0 18,446,744,073,709,551,615 / 0 4,294,967,295 / 0 18,446,744,073,709,551,615 / 0 4,294,967,295 / 0 12/31/9999 23:59:59.999 12/31/9999 23:59:59.999 12/31/9999 23:59:59.999 12/31/9999 23:59:59.999 12/31/9999 23:59:59.999 12/31/9999 23:59:59.999 12/31/9999 23:59:59.999 12/31/9999 23:59:59.999 12/31/9999 23:59:59.999 12/31/9999 23:59:59.999 12/31/9999 23:59:59.999 12/31/9999 23:59:59.999 Units 1 Unit 232 Unit 1 Unit 232 Unit 1 Unit 2 Unit 1 Unit 1 msec 1 msec 1 msec 1 msec 1 msec 1 msec 1 msec 1 msec 1 msec 1 msec 1 msec 1 msec
32

This chapter expands upon information listed in the Nexus 1250, 1260 and 1270 Modbus Register Map (Chapter 2) Section Headings (F1, F2, etc) refer to the value in the Register Maps Type column.

6.1: Type F1 Day of Week

This point contains a 16-bit number, associated with the days of the week as follows:

Value 0001H 0002H 0003H 0004H 0005H 0006H 0007H

Day of Week Sunday Monday Tuesday Wednesday Thursday Friday Saturday

6.2: Type F2 Internal Inputs - High Speed Sampling - Delta

These points indicate whether a High Speed Digital Input, sampled at the rate of waveform capture, changed state during the last cycle. A bit value of 1 indicates a change occured; a bit value of 0 indicates no change occured. Example: Object 1, Indexes 0-7, HSI Delta Inputs, might contain the following data:

Electro Industries/Gauge Tech

DOC # E107748

137

Index Values HSI Delta Meaning Interpretation

0 0 8

1 0 7

2 0 6

3 0 5

4 0 4

5 1 3 Change

6 0 2

7 0 1

Input 3 changed state at least once during the last cycle.

6.3: Type F3 Internal Inputs - High Speed Sampling - Current State

These points indicate whether a High Speed Digital Input, sampled at the rate of waveform capture, is open or closed. A bit value of 1 indicates open; a bit value of 0 indicates closed. Example: Object 1, Indexes 8-15, HSI Current State Inputs, might contain the following data:

Index Values HSI Current States Meaning Interpretation

8 0 8

9 1 7

10 1 6

11 0 5

12 0 4

13 0 3

14 0 2

15 1 1

Closed Open

Open Closed Closed Closed Closed Open Inputs 7, 6 and 1 are now open.

6.4: Type F4 Secondary Voltage, Current, VA, VAR, Wattage or Frequency

Range: +3276.7 / 0.0 V sec +32.767 / 0.000 A sec +32767 / -0 VA sec +32767 / -32768 VAR sec, W sec +3276.7 / 0.0 Hz Unit: 0.1 V sec 0.001 A sec 1 VA, VAR, W sec 0.1 Hz

Electro Industries/Gauge Tech

DOC # E107748

138

Each point contains a 16 bit signed (2's compliment) number. Positive values have the most significant bit clear, and have the same magnitude as an unsigned integer. Negative values have the most significant bit set. The magnitude of a negative value is found by complimenting (inverting) all of the bits and adding 1. Example: Object 30, Index 5, Tenth second Phase A Current might contain the following data:

2 byte signed integer (Hex) Most significant bit 2 byte integer (Decimal) 0.001 Amp secondary

00125H 0 +293 +0.293 Amp secondary

Object 30, Index 16, Tenth second Phase A VAR, might contain the following data:

2 byte signed integer (Hex) Most significant bit 2 byte signed integer (Decimal) VAR secondary

00125H 0 +293 +293 VAR secondary

Object 30, Index 16, Tenth second Phase A VAR, might contain the following data:

2 byte signed integer (Hex) Most significant bit Compliment Increment 2 byte signed integer (Decimal) VAR secondary

OFEDBH 1 00124H 00125H -293 -293 VAR secondary

Electro Industries/Gauge Tech

DOC # E107748

139

6.5: Type F5 Power Factor

Range: 3.999 / 0.000 Unit: 0.001 PF Each point contains a 16 bit unsigned number. This number varies from 0000H 0F9FH, or 0 to 3999 in decimal. This representation allows for expressing Power Factor from 0 to 1 in the four quadrants, as follows:

Quadrant 1 4 3 2

Value Hex 0000H Dec 0

PF 0.000

Value Hex 01F4H Dec 500

Value Hex Dec

PF 0.999

DOC # E107748

142

6.8: Type F8 Energy Counter (Binary / Secondary)

Length: 2 Consecutive Points Range: 9,999,999,999,999,999 / 0 VAh, VARh or Wh secondary Unit: 1 VAh, VARh or Wh secondary Each pair of points contain an 8 byte unsigned integer. Example: Object 30, Indexes 0-1, VAhour, might contain the following data:

Index Value 8 byte unsigned integer Decimal VAh

0 00000000H

1 06476164H

0000000006476164H 105341284 105,341,284 VAh secondary

6.9: Type F9 Phase Sequence

This point contains a 16 bit unsigned integer, associated with the Phase Sequence as follows:

Value (Hex) 0000H 0001H

Phase Sequence A-B-C C-B-A

6.10: Type F10 Average Status

Each point contains a 16 bit unsigned integer, associated with the Average Status as follows:

Value (Hex) 0000H 0001H

Average Status Not yet available Available

Electro Industries/Gauge Tech

DOC # E107748

143

6.11: Type F11 Limit States

A bit value of 1 means that the particular limit has been passed, while a bit value of 0 means that the particular limit has not been passed. Example: Object 1, Index 16-23, Limit States, Value 1 Comparison, 18, might contain the following data:

Index Values Limit Passed Interpretation

16 0 1 No

17 0 2 No

18 0 3 No

19 0 4 No

20 0 5 No

21 1 6 Yes

22 0 7 No

23 0 8 No

Limit 6 is currently passed; all others are not passed.

6.12: Type F12 Internal Inputs - Low Speed Sampling - Current State

Each point is associated with the eight Status Inputs, sampled at a rate of 100 times/ second and debounced, requiring 2 consecutive readings to indicate a changed state. A bit value of 1 means the input is open; a bit value of 0 means the input is closed. Example: Object 1, Indexes 80-87, Low Speed Input States, might contain the following data:

Index Values LS Input States Meaning Interpretation

80 0 8

81 1 7

82 0 6

83 1 5

84 0 4

85 0 3

86 0 2

87 1 1 Open

Closed Open Closed Open Closed Closed Closed

Inputs 7, 5 and 1 are open; all other inputs are closed.

Electro Industries/Gauge Tech

DOC # E107748

144

6.13: Type F13 External Digital Input States

Each point is associated with the eight External Digital Inputs in an External Digital Input Module. A bit value of 1 means the input is open; a bit value of 0 means the input is closed. Example: Object 1, Indexes 88-95, Digital Input States, Module 1, might contain the following data:

Index Values External Digital Input States Meaning Interpretation

88 0 8

89 1 7

90 0 6

91 1 5

92 0 4

93 0 3

94 0 2

95 1 1 Open

Closed Open Closed Open Closed Closed Closed

Inputs 7, 5 and 1 are open; all other inputs are closed.

6.14: Type F14 External Input Accumulations

Range: 4,294,967,295/0 Unit: Accumulated Transitions Each point contains a 4 byte unsigned integer. Example: Object 20, Index 10, Input Accumulation 1, Module 1, might contain the following data:

4 byte unsigned integer Decimal Accumulated Transitions

06476164H 105341284 105,341,284 Accumulated Transitions

Electro Industries/Gauge Tech

DOC # E107748

145

6.15: Type F15 Energy Counter (Binary / Primary)

Length: 2 Consecutive Points Range: 9,999,999,999,999,999/0 VAh, VARh or Wh primary 1 VAh, VARh or Wh primary Each pair of points contains an 8 byte unsigned integer. Example: Object 20, Index 42-43, VAhour, might contain the following data:

Index Value 8 byte unsigned integer Decimal VAh

42 00000000H

43 06476164H

0000000006476164H 105341284 105,341,284 VAh primary

6.16: Type F16 Average Select

Each point contains a 16-bit number associated with the selection of an average as follows:

Value 0000H 0001H

Average Fixed Window Sliding Window

Electro Industries/Gauge Tech

DOC # E107748

146

6.17: Type F17 CT/PT Ratio

Length: 2 Consecutive Points Each pair of points represents a CT or PT Ratio. The first point is the numerator; the second point is the denominator. Example: Object 30, Indexes 1815-1816, Time of Use Prior Season CT Ratio, might contain the following data:

Index Values Decimal Meaning Interpretation

1815 000007D0H 2000 2000:5

1816 0000005H 5

A 2000 - to - 5 CT Ratio

6.18: Type F18 Fixed Window Average for Internal Inputs

Length: 2 Consecutive Points Range: 18,446,744,073,709,551,615/0 Units 1 VAh, VARh or Wh primary Each pair of points contains an 8 byte unsigned integer. Example: Object 20, Index 818-819, Fixed Window Average Internal Input 1, might contain the following data:

Index Value 8-byte Unsigned Integer Decimal Fixed Window Average

818 00000000H

819 06476164H

0000000006476164H 105341284 105,341,284 Units

Electro Industries/Gauge Tech

DOC # E107748

147

6.19: Type F19 Temperature

Range: +328 C / - 328 C Unit: 0.01 degree C This point contains a 16 bit signed (2s compliment) number. Positive values have the most significant bit clear and have the same magnitude as an unsigned integer. Negative values have the most significant bit set. The magnitude of a negative value is found by complimenting (inverting) all of the bits and adding 1. Example: Object 30, Index 2048, Internal Temperature, might contain the following data:

Value Most significant bit Decimal Celsius

08BBH 0 +2235 +22.35 degree C

Object 30, Index 2048, Internal Temperature, might contain the following data:

Value Most significant bit Compliment Increment Decimal Celsius

F745H 1 08BAH 08BBH -2235 -22.35 degree C

Electro Industries/Gauge Tech

DOC # E107748

148

6.20: Type F20 Relay Logic States

Each point is associated with the 16 Limits or Relays. A bit value of 1 means TRUE, while a bit value of 0 means FALSE. TRUE and FALSE result from the AND, OR, XOR, Hysteresis and NOT of two input values of 1 or 0. Example: Object 1, Index 152-159, Relay Logic Input 1, Logic Tree 1-8, might contain the following data:

Index Values Logic Tree State Interpretation

152 0 1 False

153 0 2 False

154 0 3 False

155 0 4 False

156 0 5 False

157 1 6 True

158 0 7 False

159 0 8 False

The first input to Relay Logic Tree 6 is True; all others are False.

6.21: Type F21 Relay Delays

Each point contains an unsigned integer which is a count-down delay. A relay logic tree must be stable for the duration of the delay before triggering a relay. Delays are preloaded when the Gate G value changes. They are decremented every pass thereafter, until they reach zero. Example: Object 30, Index 2081, Delay Timer, Relay 1, might contain the following data:

Value Bytes Interpretation

04H 04H Relay 1 has 4 seconds of delay remaining.

Electro Industries/Gauge Tech

DOC # E107748

149

6.22: Type F22 Desired Relay States

Each point is associated with the 16 Relays. A bit value of 1 means the relay should be energized (connected to Normal Open); a bit value of 0 means the relay should be de-energized (connected to Normal Close). These are states pending transmission to the relays. Example: Object 1, Indexes 392-399, Desired Relay States, Relays 1-8, might contain the following data:

Index Values Relay State Interpretation

392 0 1 NC

393 0 2 NC

394 0 3 NC

395 0 4 NC

396 0 5 NC

397 1 6 NO

398 0 7 NC

399 0 8 NC

Relay 6 should be energized; all others should be de-energized.

6.23: Type F23 Relay Pending Updates

Each point is associated with the 16 Relays. A bit value of 1 means the relay needs to be updated; a bit value of 0 means the relay does not need to be updated. Example: Object 1, Indexes 408-415, Relay Pending Updates, Relays 1-8, might contain the following data:

Index Values Relay State Interpretation

408 0 1

409 0 2

410 0 3

411 0 4

412 0 5

413 1 6 Update

414 0 7

415 0 8

Relay 6 needs to be updated.

Electro Industries/Gauge Tech

DOC # E107748

150

6.24: Type F24 Shadowed Relay State

Each point is associated with the 16 Relays. A bit value of 1 means the relay is energized (connected to Normal Open); a bit value of 0 means the relay is de-energized (connected to Normal Close). These are states not confirmed by a status poll of the external device. Example: Object 1, Indexes 424-431, Shadowed Relay States, Relays 1-8, might contain the following data:

Index Values Relay State Interpretation

424 0 1 NC

425 0 2 NC

426 0 3 NC

427 0 4 NC

428 0 5 NC

429 1 6 NO

430 0 7 NC

431 0 8 NC

Relay 6 is energized; all others are de-energized.

6.25: Type F25 Confirmed Polled Relay State

Each point is associated with the 16 Relays. A bit value of 1 means the relay is energized (connected to Normal Open); a bit value of 0 means the relay is de-energized (connected to Normal Close). These states are confirmed by a status poll of the external device. Example: Object 10, Indexes 0-7, Confirmed Polled Relay States, Relays 1-8, might contain the following data:

Index Values Relay State Interpretation

0 0 1 NC

1 0 2 NC

2 0 3 NC

3 0 4 NC

4 0 5 NC

5 1 6 NO

6 0 7 NC

7 0 8 NC

Relay 6 is energized; all others are de-energized.

Electro Industries/Gauge Tech

DOC # E107748

151

6.26: Type F26 Valid Flag for Confirmed Relay State

Each point is associated with the 16 Relays. A bit value of 1 means the relay is valid; a bit value of 0 means the relay is invalid. Example: Object 1, Indexes 440-447, Valid Flag for Confirmed Relay States, Relays 1-8, might contain the following data:
Index Values Relay Valid Interpretation 440 1 1 Valid 441 1 2 Valid 442 1 3 Valid 443 1 4 Valid 444 0 5 Invalid 445 0 6 Invalid 446 0 7 Invalid 447 0 8 Invalid

Relays 1-4 have been polled - Confirmed States are valid.

6.27: Type F27 Locked Relay

Each point is associated with the 16 Relays. A bit value of 1 means the relay is locked; a bit value of 0 means the relay is unlocked and Limits of Relay Logic Trees and Relays determine the state of the relay. Example: Object 1, Indexes 456-463, Confirmed Polled Relay States, Relays 1-8, might contain the following data:

Index Values Relay Locked Interpretation

456 0 1 No

457 0 2 No

458 0 3 No

459 0 4 No

460 0 5 No

461 1 6 Yes

462 0 7 No

463 0 8 No

Relay 6 is locked; all others are unlocked.

Electro Industries/Gauge Tech

DOC # E107748

152

6.28: Type F28 Locked Relay State

Each point is associated with the 16 Relays. A bit value of 1 means the relay is energized (connected to Normal Open); a bit value of 0 means the relay is de-energized (connected to Normal Close). Example: Object 1, Indexes 472-479, Confirmed Polled Relay States, Relays 1-8, might contain the following data:

Index Values Relay Locked Interpretation

472 0 1 NC

473 0 2 NC

474 0 3 NC

475 0 4 NC

476 0 5 NC

477 1 6 NO

478 0 7 NC

479 0 8 NC

Relay 6 is locked energized; all others (if locked) are locked de-energized.

Electro Industries/Gauge Tech

DOC # E107748

153

6.29: Type F29 Action Points

Each point, when acted upon with a Control Relay Output Block, will perform a different function.

Index 128 129 130 131 132 133 134

Action All Logs will be reset. All Maximums will be reset. All Minimums will be reset. All Energy Readings will be reset. Time of Use Data will be reset. A waveform will be captured. Pulse Accumulations will be reset. The device is temporarily switched to Boot Mode using default communication parameters of: Modbus RTU, Address 1, 9600 Baud, 8n1 on all ports. Communicator EXT Software can Flash update the Run-Time Code or Programmable Settings on this or any other comm port at this time. If Flash updating does not take place for 30 seconds while in this mode, the meter returns to the regular Run-Time mode with the programmed settings on all ports.

135

Electro Industries/Gauge Tech

DOC # E107748

154

AAAdvanced Customisation Part 1
100% (1)
AAAdvanced Customisation Part 1
99 pages
NOJA-519-10 DNP3 Protocol Implementation
100% (2)
NOJA-519-10 DNP3 Protocol Implementation
41 pages
Research Proposal On Grapevine Communication
No ratings yet
Research Proposal On Grapevine Communication
17 pages
Heidenhain TNC122
No ratings yet
Heidenhain TNC122
70 pages
D000011316 E850 Tech Data Sheet
No ratings yet
D000011316 E850 Tech Data Sheet
10 pages
Pm130 Plus Modbus
No ratings yet
Pm130 Plus Modbus
76 pages
G12 Empowerment Technologies Module (Learner's Copy)
No ratings yet
G12 Empowerment Technologies Module (Learner's Copy)
99 pages
Altium Designer Knjiga Na Engleskom PDF
100% (2)
Altium Designer Knjiga Na Engleskom PDF
84 pages
Nexus 1500+ Power Quality Meter Modbus Manual - E154715
No ratings yet
Nexus 1500+ Power Quality Meter Modbus Manual - E154715
777 pages
Nexus 1500+ Power Quality Meter Modbus Manual - E154715
No ratings yet
Nexus 1500+ Power Quality Meter Modbus Manual - E154715
904 pages
APOS (A8, EX, DX) Development Mode Preparing
No ratings yet
APOS (A8, EX, DX) Development Mode Preparing
27 pages
Modbus Manual V.1.01 - E154715
No ratings yet
Modbus Manual V.1.01 - E154715
860 pages
EM 6433 Series Communication
No ratings yet
EM 6433 Series Communication
15 pages
NOJA-519-07 DNP3 Protocol Implementation PDF
100% (2)
NOJA-519-07 DNP3 Protocol Implementation PDF
40 pages
NEXUS 1262 Modbus Map
No ratings yet
NEXUS 1262 Modbus Map
406 pages
Nexus 1450 Meter Modbus Manual E171707
No ratings yet
Nexus 1450 Meter Modbus Manual E171707
586 pages
Microwave Link Presentation
0% (1)
Microwave Link Presentation
72 pages
LIS302DL MEMS Accelerometer
100% (1)
LIS302DL MEMS Accelerometer
42 pages
Technical Data: Industrial+Commercial ZMD402CT, ZFD402CT
No ratings yet
Technical Data: Industrial+Commercial ZMD402CT, ZFD402CT
6 pages
Income Statements Notes Chapter 21
No ratings yet
Income Statements Notes Chapter 21
5 pages
MPR-3 User Manual V5
No ratings yet
MPR-3 User Manual V5
51 pages
Substation Auto
No ratings yet
Substation Auto
58 pages
Gek 113017
No ratings yet
Gek 113017
404 pages
Guia Seleccion Motores 20 HP Siemenes
No ratings yet
Guia Seleccion Motores 20 HP Siemenes
212 pages
Schneider Electric - PowerLogic-ION9000 - METSEION92040
No ratings yet
Schneider Electric - PowerLogic-ION9000 - METSEION92040
6 pages
PUB00070 - Recommended Functionality For EIP Devices v10
No ratings yet
PUB00070 - Recommended Functionality For EIP Devices v10
20 pages
MANUAL MEDICION DE INTERFASE - Compressed
No ratings yet
MANUAL MEDICION DE INTERFASE - Compressed
230 pages
Nexus 1250 1252 Operation & Installation Manual
No ratings yet
Nexus 1250 1252 Operation & Installation Manual
154 pages
DF 2-8 C33052 - 20 - F0
No ratings yet
DF 2-8 C33052 - 20 - F0
154 pages
Gek 113017
No ratings yet
Gek 113017
404 pages
Data Sheet: Microcontrollers
No ratings yet
Data Sheet: Microcontrollers
198 pages
Pm130 Plus Modbus
No ratings yet
Pm130 Plus Modbus
74 pages
TPA Deals Only With Immovable Property'
0% (1)
TPA Deals Only With Immovable Property'
17 pages
1210DB1401 BACnet PIC August-2015 PDF
No ratings yet
1210DB1401 BACnet PIC August-2015 PDF
12 pages
MPR-3 User Manual V5
No ratings yet
MPR-3 User Manual V5
52 pages
Heidenhain 122 Service Manual
No ratings yet
Heidenhain 122 Service Manual
70 pages
DNP 3 v324 Rev34
No ratings yet
DNP 3 v324 Rev34
74 pages
Gust Loads On Aircraft
No ratings yet
Gust Loads On Aircraft
59 pages
DOST Puts Up Free Online Reviewer For PSHS Exams
No ratings yet
DOST Puts Up Free Online Reviewer For PSHS Exams
2 pages
Hydrive Training e
No ratings yet
Hydrive Training e
53 pages
Mgate Mb3170/Mb3270 Quick Installation Guide: Edition 7.1, February 2016
No ratings yet
Mgate Mb3170/Mb3270 Quick Installation Guide: Edition 7.1, February 2016
6 pages
Chapter 6: Data Communication
No ratings yet
Chapter 6: Data Communication
19 pages
Dimensi MK6N Class 0.5s
No ratings yet
Dimensi MK6N Class 0.5s
1 page
M-3311 DNP Protocol
No ratings yet
M-3311 DNP Protocol
32 pages
How To Solve The Rubik's Cube
No ratings yet
How To Solve The Rubik's Cube
23 pages
Cam Lap
No ratings yet
Cam Lap
14 pages
Schneider Electric - Modicon-M262 - TM262L20MESE8T
No ratings yet
Schneider Electric - Modicon-M262 - TM262L20MESE8T
17 pages
c3 100 PDF
No ratings yet
c3 100 PDF
38 pages
Dnp3.0 - Resumo - Schneider
No ratings yet
Dnp3.0 - Resumo - Schneider
30 pages
PM 174
No ratings yet
PM 174
39 pages
The Mindanao Island During The Japanese Occupation - An Insight by The Philippine Guerilla Movement
No ratings yet
The Mindanao Island During The Japanese Occupation - An Insight by The Philippine Guerilla Movement
27 pages
Dassault Mirage III
No ratings yet
Dassault Mirage III
31 pages
CMA Inter - July 2023 Past Paper Questions Practice
No ratings yet
CMA Inter - July 2023 Past Paper Questions Practice
36 pages
Edmi Mk3 Dnp3 Profile A0 - 2
No ratings yet
Edmi Mk3 Dnp3 Profile A0 - 2
14 pages
A6V13951362
No ratings yet
A6V13951362
12 pages
Instruction Manual: Be1-Cds Current Differential System Distributed Network Protocol (DNP V3.00)
No ratings yet
Instruction Manual: Be1-Cds Current Differential System Distributed Network Protocol (DNP V3.00)
32 pages
Instruction Manual: BE1-951 Overcurrent Protection System Distributed Network Protocol (DNP V3.00)
No ratings yet
Instruction Manual: BE1-951 Overcurrent Protection System Distributed Network Protocol (DNP V3.00)
32 pages
LIS302DL: MEMS Motion Sensor 3-Axis - 2g/ 8g Smart Digital Output "Piccolo" Accelerometer
No ratings yet
LIS302DL: MEMS Motion Sensor 3-Axis - 2g/ 8g Smart Digital Output "Piccolo" Accelerometer
42 pages
A1700 Direct Connected or CT Metering: The Power To Change..
No ratings yet
A1700 Direct Connected or CT Metering: The Power To Change..
15 pages
Sunalign: Agri Tech
No ratings yet
Sunalign: Agri Tech
18 pages
Motion Unit Packet
No ratings yet
Motion Unit Packet
10 pages
Distributed Network Protocol (DNP) V3.00 For Visionr
No ratings yet
Distributed Network Protocol (DNP) V3.00 For Visionr
17 pages
English Assignment
No ratings yet
English Assignment
11 pages
En 106393
No ratings yet
En 106393
6 pages
SPF Catalogue New 2024
No ratings yet
SPF Catalogue New 2024
8 pages
Understanding The Nature and Scope of HRM
No ratings yet
Understanding The Nature and Scope of HRM
19 pages
DG-A Series DNP3 ToMODBUS TCP Walkthrough
No ratings yet
DG-A Series DNP3 ToMODBUS TCP Walkthrough
12 pages
Visual Guide To Phrasal Verbs - Part 1 - 1 - Run
No ratings yet
Visual Guide To Phrasal Verbs - Part 1 - 1 - Run
9 pages
TPG Relays ABB REF615 UPT Padang
No ratings yet
TPG Relays ABB REF615 UPT Padang
6 pages
PM Textbooks
No ratings yet
PM Textbooks
2 pages
6GK75425DX100XE0 Datasheet en
No ratings yet
6GK75425DX100XE0 Datasheet en
3 pages
Thomson One Wealth Solutions Brochure
No ratings yet
Thomson One Wealth Solutions Brochure
10 pages
Valvepedia March-2017
No ratings yet
Valvepedia March-2017
7 pages
Datasheet - XN-322-16DI-PD: Part No. Article No. Catalog No
No ratings yet
Datasheet - XN-322-16DI-PD: Part No. Article No. Catalog No
10 pages
Informacion Tecnica Modulo de Entrada PLC Horner Modelo He559dim710
No ratings yet
Informacion Tecnica Modulo de Entrada PLC Horner Modelo He559dim710
3 pages
Darda Hidráulica
No ratings yet
Darda Hidráulica
9 pages
Compare Products: 140NOE77101C BMENOC0301C 140NOE77101
No ratings yet
Compare Products: 140NOE77101C BMENOC0301C 140NOE77101
3 pages
Program: 24 VDC, Can, 12 I, 6 Relay, Display Part No. EC4P-221-MRXD1 Article No. 106393
No ratings yet
Program: 24 VDC, Can, 12 I, 6 Relay, Display Part No. EC4P-221-MRXD1 Article No. 106393
6 pages
What Is Prompt Engineering v2
No ratings yet
What Is Prompt Engineering v2
6 pages
Legal Assistant or Human Resources or Director of Human Resource
No ratings yet
Legal Assistant or Human Resources or Director of Human Resource
2 pages
M8650A0C0H6C7B1A
No ratings yet
M8650A0C0H6C7B1A
4 pages
MU320 Merging Unit: Analog and Digital, Fast and Accurate: Fully-Integrated Merging Unit For Process Bus Applications
No ratings yet
MU320 Merging Unit: Analog and Digital, Fast and Accurate: Fully-Integrated Merging Unit For Process Bus Applications
2 pages
Dash For The Elderly 21 K Trail Run
No ratings yet
Dash For The Elderly 21 K Trail Run
4 pages
2324 Level J (UAE) Moral Education Exam Related Materials T3 W6
No ratings yet
2324 Level J (UAE) Moral Education Exam Related Materials T3 W6
2 pages
Christine Build PDF2
No ratings yet
Christine Build PDF2
3 pages
Shirdi Room 2
No ratings yet
Shirdi Room 2
2 pages
NCP Format
No ratings yet
NCP Format
2 pages
Welbilt Bread Machine Model Abm1h70 Instruction Manual & Recipes Abm 1h70
No ratings yet
Welbilt Bread Machine Model Abm1h70 Instruction Manual & Recipes Abm 1h70
4 pages
2014 Anc Schedule of Activites 08.30.2014 p2
No ratings yet
2014 Anc Schedule of Activites 08.30.2014 p2
2 pages
ALPHA Plus Meter Variations and Specifications E
No ratings yet
ALPHA Plus Meter Variations and Specifications E
2 pages
Anjaney Deshpande Resume
No ratings yet
Anjaney Deshpande Resume
1 page
Electricity Measuring & Testing Instruments World Summary: Market Values & Financials by Country
From Everand
Electricity Measuring & Testing Instruments World Summary: Market Values & Financials by Country
Editorial DataGroup
No ratings yet
Analysis of Electric Machinery and Drive Systems
From Everand
Analysis of Electric Machinery and Drive Systems
Paul Krause
No ratings yet
EnterpriseOne Interview Questions
From Everand
EnterpriseOne Interview Questions
equitypress
No ratings yet
Analog Dialogue, Volume 46, Number 2: Analog Dialogue, #6
From Everand
Analog Dialogue, Volume 46, Number 2: Analog Dialogue, #6
Analog Dialogue
No ratings yet