MONITORING RELAYS

These relays are best suitable for monitoring balanced or unbalanced supplies, either of single phase, 3-phase 3-wire or 3-phase 4 wire loads powered by generators, UPS, stabilizers, inverters, or Mains (by Electricity Boards / Utilities); in AMF panels, PCCs, distribution boards and for power monitoring of individual loads / motors / pumps.

MODELS D1 VCR1, D1 VCR2 VCT D2, VCF D2, D2 VCT1, D1 VCT1, S2 VMR 4, S2 VMR 5, D2 EFR1, F3 EFR 1, OCS D1, S2 CMR2, S2 CMR3, S2 CMR4, OFS D1, S2 FMR1, RPT D2, RPF D2, CBCT, CT

FEATURES

Fixed/adjustable under/Over trip settings for parameters. Fixed/adjustable trip delays and Power On delays Built-in or external power supply Resetting Auto or Manual Output contacts : 1 CO or 2 CO Choice of enclosures (DIN-Rail, Flush) Models with Micro-Controller based design Use of SMD Technology User-friendly LED indications

PROTECTIONS / FUNCTIONS
Under/Over Voltage, Under/Over Current Under/Over Frequency Reverse Power Earth Fault/Ground Fault Earth leakage

Ordering Instructions
Product Family Name Model Name System Supply Voltage & frequency Aux. Supply/Control supply voltage Current input (1A or 5A)
17

VOLTAGE MONITORING RELAYS

1 Phase Voltage Monitoring Relay

D1 VCR1

1 Phase Voltage Monitoring Relay

D1 VCR2

Voltage Monitoring Relay, 3-3W

VCT D2

Voltage Monitoring Relay, 3-4W

VCF D2

Single Phase Under & Over voltage, Auto Reset, Adjustable under / over voltage settings, 2 CO output relay.

Single Phase Under & Over voltage, Auto Reset, Adjustable under/over voltage settings, 2 CO output relay

3-Phase 3-Wire Under & Over voltage Auto/Manual Reset, Adjustable under/over voltage settings, adjustable trip delay & ON delay, 2 CO output relay

3-Phase 4-Wire Under & Over voltage Auto/Manual Reset, Adjustable under/over voltage settings, adjustable trip delay & ON delay, 2 CO output relay

Note: Mention specific voltage ( Fixed/wide range ) in order

System Supply Output Relay Contact Trip Setting Under Voltage

220/230/240 V AC (+20%-30%), 50/60 Hz 3% 2 CO 75 - 95% [Variable] of set value

220/240 VAC,(+20%,-25%), 50/60 Hz3% 2 CO 165 V to 225 V (in step of 15) (2%) 2 CO

110/240/380/415/440 V AC +20%, 25%,50/60Hz 2 CO 75% - 95% (adjustable)

75% - 95% (adjustable)

Over Voltage

105 - 120% [Variable] of set value

230 V to 290 V (in step of 15) (2%)

105% -120% (adjustable)

105% -120% (adjustable)

Trip Time Delay Power on Delay Reset Weight Dimensions (mm) Overall (L x W x D) Mounting

2- 5 Sec (Fixed) (UV/OV) Auto Reset 180 gms. 76 x 30.5 x 117.5 68 mm centre to centre / 35 mm rail mounting

3.5 sec. (1.5 sec.) 3 min.( 20 sec) Auto Reset 180 gms. 76 x 30.5 x 117.5 68 mm centre to centre / 35 mm rail mounting

1-10 secs. (adjustable) 1-10 secs. (adjustable) Auto / Manual 450 gms. 76 x 56.5 x 117.5 67 x 46 / 35 mm rail mounting

1-10 secs. (adjustable) 1-10 secs. (adjustable) Auto / Manual 450 gms. 76 x 56.5 x 117.5 67 x 46 / 35 mm rail mounting

Wherever not specified Contact Rating : 5A @ 230 V AC (resistive)

OV SET OV RESET
OV SET OV RESET

3 Ph
UV RESET

1 Ph N
UV RESET

UV SET TD 2 to 5sec. TD
TRIP DLY 2 to 5Sec.

UV SET

TD 1 to 10sec.

TD

13

14

2
P.ON DLY= 180 Sec.
Reset DLY= 180 Sec.
Reset DLY= 180 Sec.

13

14

16

17

T on
1 to 10sec.

13

15

13

15

16

18

L N
OFF ON

L O A D

L N

L O A D

R Y B

OFF

ON

L O A D
OFF

R Y B N

D1 VCR1
1

L O A D
OFF

N/V

N/V

D1 VCR2
1

N/V

ON

1 2 3 4 5 6
D1 VCR1
7
8

1 2 3 4 5 6
VCF D2
A/M LINK

N/V

ON

VCT D2
9

A/M LINK

13 14 15

7 8 9 10 11 12
13

7 8 9 10 11 12

14

15

13 14 151617 18

13 14 151617 18

Relay contact position shown in 'Power off' condition

18

VOLTAGE MONITORING RELAYS

Voltage Monitoring Relay, 3-3W

D1 VCT1

Voltage Monitoring Relay

D2 VCT1

Voltage Monitoring Relay, 3-3W

S2 VMR4

Voltage Monitoring Relay, 3-4W

S2 VMR5

US

US

US

3-Phase 3-Wire Under & Over Voltage, Auto reset, Adjustable UV/OV settings, fixed trip delay, 2 CO output relay.

3-Phase 3-Wire and 3-Phase 4-Wire (selectable) Under & Over voltage, Microcontroller based design, Auto/Manual Reset, Adjustable under/over voltage settings, Absolute values for UV/OV, adjustable trip delay & ON delay, 2 CO output relay (or selectable 1CO for UV, 1CO for OV) Failsafe-non-failsafe selectable

3-Phase 3-Wire Under & Over voltage, Microcontroller based design, SMD Technology Auto/Manual Reset, Adjustable under/over voltage settings, Absolute values for UV/OV, adjustable trip delay & ON delay, 2 CO output relay (or selectable 1CO for UV, 1CO for OV) Failsafe-non-failsafe selectable

3-Phase 4-Wire Under & Over voltage, Microcontroller based design, SMD Technology, Auto / Manual Reset, Adjustable under/over voltage settings, Absolute values for UV/OV, adjustable trip delay & ON delay, 2 CO output relay (or selectable 1CO for UV, 1CO for OV) Failsafe-non-failsafe selectable

100-120/220-240/380-440 V AC, 48-63Hz 2 CO 75-115 Unit of 100-120 V AC 165-225 Unit of 220-240 V AC 285-425 Unit of 380-440 V AC

100-120/220-240/380-440V AC -25%+20%,48-63 Hz 100-120/220-240/380-440V AC -25%+20%,48-63 Hz 100-120/220-240/380-440V AC -25%+20%,48-63 Hz 1 CO + 1 CO / 2 CO 1 CO + 1 CO / 2 CO 1 CO + 1 CO / 2 CO

Ph Ph Setting: For 380-440V AC For 220-240V AC For 100-120V AC Ph N Sensing: For 380-440V AC For 220-240V AC For 100-120V AC Ph Ph Sensing: For 380-440V AC For 220-240V AC For 100-120V AC Ph N Sensing: For 380-440V AC For 220-240V AC For 100-120V AC 285-425V AC (Variable) 165-225V AC (Variable) 75-115V AC (Variable) 165-245V AC (Variable) 95-135V AC (Variable) 45-65V AC (Variable) 400-520V AC (Variable) 230-290V AC (Variable) 105-145V AC (Variable) 230-310V AC (Variable) 130-170V AC (Variable) 60-80V AC (Variable) 400-520V AC (Variable) 230-290V AC (Variable) 105-145V AC (Variable) 230-310V AC (Variable) 130-170V AC (Variable) 60-80V AC (Variable) 285 - 425V AC (Variable) 165-225V AC (Variable) 75-115V AC (Variable) 165-245V AC (Variable) 95-135V AC (Variable) 45-65V AC (Variable)

105-145 Unit of 100-120 V AC 230-290 Unit of 220-240 V AC 400-520 Unit of 380-440 V AC

3.51.5 Sec (UV/OV) Auto Reset 200 gms. (Approx). 76 x 30.5 x 117.5 68 centre to centre / 35 mm rail mounting

1-10 Sec (Variable) UV/OV/NF 1-10 Sec (Variable) Auto/ Manual Reset 300 gms (Approx.) 76 X 56.5 X 117.5 67 x 46 / 35 mm rail mounting

1-10 Sec. (Variable) 1-10 Sec (Variable) Auto / Manual Reset 110 gms (Approx.) 90 X 35 X 60 35 mm Rail Mounting

1-10 Sec. (Variable) 1-10 Sec (Variable) Auto / Manual Reset 110 gms (Approx.) 90 X 35 X 60 35 mm Rail Mounting

OV SET
OV SET OV RESET
OV SET OV RESET

OV SET OV RESET

OV RESET

3 Ph
UV SET

UV RESET

3 Ph N
UV RESET

3 Ph
UV RESET

3 Ph N
UV RESET

TD 3.5 sec.

TD

UV SET

TD 1 to 10sec.

UV SET

UV SET

TD

TD 1 to 10sec.

TD

TD 1 to 10sec.

TD

13

14

13

14

16

17

T on
1 to 10sec.

10

11

T on
1 to 10sec.

10

11

T on
1 to 10sec.

13

15

13

15

16

18

10

12

10

12

L O A D

L O A D N
3 or 4 Wire selection link

R Y B

L O A D

R Y B N

L O A D

OFF

DOL STARTER

D2 VCT1

Relay position shown in Power off condition Note: S2 Series - RoHS Product available on request.
19

CURRENT MONITORING RELAYS

OCS D1
1 Phase Over Current Relay

S2 CMR2
1 Phase Current Monitoring Relay

US

Single phase over current Auto reset, Input 1A or 5 A through CT, Adjustable over current trip settings, Adjustable trip delay, 1 CO output relay

Single phase under & over current Microcontroller based design, SMD technology, Auto/Manual reset, Input 1A or 5 A through CT, Adjustable under / over current trip settings, adjustable trip delay & ON delay, 2 CO output relay (or selectable 1CO for UC, 1CO for OC) Failsafe-non-failsafe mode selectable

Note: Mention specific voltage ( Fixed/wide range ) in order

Supply Voltage System Auxiliary Ext. Input Output contact

110-120/220-240/380-440 V AC 20%, 12 V DC/24/30 V DC10% 1 Amp / 5 Amp (Secondary) CT or 250/500 mA 1 CO

100-120 / 220-240 / 415 V AC 20%, 24 V DC 10% 1 Amp / 5 Amp (Secondary) CT 1 CO + 1 CO / 2 CO

Trip setting EF Trip Setting Under Current Over Current Power On Delay Trip Time Delay Resetting Weight Dimensions (mm) Overall (L x W x D) Mounting (L x W) N.A.
50% -140% (adjustable) of CT sec

10% - 100% (Variable) Of CT Sec. 50% - 140% (Variable) Of CT Sec. 1-10 Sec. (Adjustable) 1 Sec. 1-10 Sec. (Adjustable) 1 Sec. Auto / Manual 140 gms 90 X 35 X 60 35 mm Rail Mounting

3.5 secs 1.5 sec (fixed) 1 - 10 secs (adjustable) Auto 250 gms. 76 x 30.5 x 117.5 68mm centre to centre / 35mm rail Mounting

Wherever not specified Contact Rating : 5A @ 230 V AC (resistive)

Aux. Supply OC SetPoint

Aux. Supply OC SetPoint UC SetPoint

OC Reset

OC Reset UC Reset

Current Input

Current Input

T ON 2 to 5 sec. 13 13 14 15

Td 1 to 10 sec.
7 7 8 10 11 12

T ON 1 to 10 sec.

AUTO RESET

Td 1 to 10 sec.

9 10

Application D2 EFR1, S2 CMR3, S2 CMR4 can be used for breaker tripping

L
N

BUSBAR TRIP COIL C.B. RELAY CONTACTS C.T. RELAY COIL FAULT A CIRCUIT TO BE PROTECTED
Interlocking circuit is required for shunt trip coil as shunt coil require pulse only for tripping, incase of contineous power shunt coil burns.

L O A D

L O A D

BATTERY

TRIP COIL
1 2 3
OCS D1

N/V
DOL STARTER ON OFF

AUX. SUPPLY
7 8 9

13 14 15

20

Relay contact position shown in 'Power off' condition Note: S2 Series - RoHS Product available on request. CCS D2 Model Available on request.

GROUND FAULT MONITORING RELAYS

D2 EFR1
Earth Fault Relay

F3 EFR1
Earth Fault Relay

S2 CMR3
Ground Fault Relay

S2 CMR4
Earth Leakage Relay

New

US

US

Earth fault/Ground fault monitoring of 3 phase systems Manual Reset, Input 1A or 5A through CBCT, Adjustable earth fault trip setting, adjustable trip delay, 2 CO relay output

Earth fault/Ground fault monitoring of 3 phase systems Manual Reset, Input 1A or 5A through CBCT, Adjustable earth fault trip setting, adjustable trip delay, 2 CO relay output

Earth fault/Ground fault monitoring of 3 phase systems, Microcontroller based design, SMD technology, Manual Reset, Input 1A or 5A through CBCT, Adjustable earth fault trip setting, Adjustable trip delay & ON delay, 2 CO relay output Failsafe-non-failsafe selectable
100-120/220-240/415 V AC 20%, 48-63 Hz 100-120/220 -240 / 415 V AC / 24V DC 20% 1A or 5A (Selectable) CBCT Secondary 2 CO
10% - 100 % (adjustable) of CT sec

Earth leakage monitoring of 3 phase systems, Microcontroller based design, SMD technology, Manual Reset, Input through CBCT, Adjustable trip setting, Adjustable trip delay & ON delay, 2 CO relay output Failsafe-non-failsafe selectable
100-120/220-240/415 V AC 20%, 48-63 Hz 100-110/240 / 415 V AC / 24V DC 20% 300mA CBCT Secondary 2 CO
10% - 100 % (adjustable) of CT sec

24-30 VDC / 110-240 V AC / DC / 380-440 V AC 20% 24/30VDC10%,110/220/230/240VAC/DC 20% 380/415/440VAC 20%, 50Hz

1A or 5A (Selectable) CBCT Secondary 1 CO (2 CO) (Pick up on Fault)

10% - 100 % (adjustable) of CT sec

5A or 1A (selectable) CBCT Secondary 1CO / (2CO)

10% - 100 % (adjustable) of CT sec

N.A. N.A. N.A. 0.1-1.0 / 1-10 Sec. (Adjustable) Manual / Remote (Selectable) 550gms. 76 x 56.5 x 117.5 67 x 46 / 35 mm rail Mounting

N.A. N.A. N.A. 0.1-1.0 / 1-10 Sec. (Adjustable) Manual / Remote (Selectable) 550gms. 96 x 96 X 80 mm 92 X 92

N.A. N.A. 1 -10 Sec.(Adjustable) 0.1 - 1 Sec.(Adjustable) Manual 140 gms 90 X 35 X 60 35 mm Rail Mounting

N.A. N.A. 1 -10 Sec.(Adjustable) 0.1 Sec to 1 Sec.(Adjustable) Manual 140 gms 90 X 35 X 60 35 mm Rail Mounting

In

Td 13 13 14 15 16 16 17 18

Td

CBCT (ZCT) With Secondary of 300 mA only

EXTERNAL 5 Amp. CT.

CBCT ( ZCT)

OFF ON

EXTERNAL 5 Amp. CT.

R Y B
N/V

L O A D

L O A D

R Y B
OFF ON

L O A D

N/V

1 2 3 4 5 6

AUX. SUPPLY
D2 EFR1

13 14 15 16 17 18

*Use either 3 x 5A Ext. CTs or 3 x 1A Ext. CTs or 1 x 5A (or 1A) CBCT

*Use either 3 x 5A Ext. CTs or 3 x 1A Ext. CTs or 1 x 5A (or 1A) CBCT

S2 CMR 4

7 8 9 10 11 12

Relay contact position shown in 'Power off' condition Note: S2 Series - RoHS Product available on request.
21

FREQUENCY MONITORING RELAYS

OFS D1
Over Frequency Relay

S2 FMR1
Frequency Monitoring Relay

US

Single phase over frequency, Auto reset, Adjustable over frequency trip settings,' Adjustable trip delay, 1 CO output relay

Single phase under & over frequency, Microcontroller based design, SMD technology, Auto reset, Adjustable under/over frequency trip settings, Adjustable trip delay & ON delay, 2 CO output relay Failsafe-nonfailsafe mode selectable
100-120/220-240/380-440 V AC 20%, 38-72 Hz In Built 1 CO + 1 CO / 2 CO 40 Hz - 60 Hz (Variable) 50 Hz - 70 Hz (Variable) 1 - 10 Sec.(Adjustable) 1 Sec. 1 - 10 Sec.(Adjustable) 1 Sec. Auto / Manual 130 gms 90 X 35 X 60 35 mm Rail Mounting

Note: Mention specific voltage ( Fixed/wide range ) in order

Supply Voltage System Auxiliary Ext. Input Output contact Trip setting Under Frequency Over Frequency

100-120 / 220-240 / 380-440 V AC 20%, 50Hz / 60 Hz 12 / 24 V DC or Built in 1 CO N.A. 50 Hz - 70 Hz 3.5 secs. 1.5 sec (fixed) 1 - 10 secs. (adjustable) Auto 450 gms. 76 x 30.5 x 117.5 68 centre to centre / 35 mm Rail Mounting

Reverse Power Power On Delay Trip Time Delay Resetting Weight Dimensions (mm) Overall (L x W x D) Mounting (L x W)

Wherever not specified Contact Rating : 5A @ 230 V AC (resistive)

Aux. Supply OF SetPoint

Aux. Supply OF SetPoint UF SetPoint

OF Reset

OF Reset UF Reset

Freq. Input

Freq. Input

T ON 2 to 5 sec. 13 13 14 15

Td 1 to 10 sec. 7 7 8 10 9 10 11 12

T ON 1 to 10 sec.

AUTO RESET

Td 1 to 10 sec.

L N

L O A D

L O A D

OFF

ON

OFF

ON

N/V
DOL STARTER

N/V
DOL STARTER

OFS D1

13

14

15

Relay contact position shown in 'Power off' condition

22

Note: S2 Series - RoHS Product available on request.

POWER MONITORING RELAYS

RPT D2
Reverse Power Relay,(3-3W) Reverse Power Relay,(3-4W)

RPF D2

3-phase 3-wire generators reverse power monitoring Auto/Manual reset, Reverse power (current) trip settings adjustable, ON delay and trip delay adjustable, 2 CO output relay

Single phase or 3-phase 4-wire generators reverse power monitoring Auto/Manual reset, Reverse power (current) trip settings adjustable, ON delay and trip delay adjustable, 2 CO output relay

100-120 / 220-240 / 380-440 V AC 20% Built-in 5A CT Secondary & R,Y, B 2 CO 2% - 20% (adjustable) 1 - 10 secs. (adjustable) 1 - 10 secs. (adjustable.) Auto / Manual 460 gms. 76 x 56.5 x 117.5 67 x 46 / 35 mm Rail Mounting

100-120 / 220-240 / 380-440 V AC 20% Built-in 5A CT Secondary & B, Neutral 2 CO 2% - 20% (adjustable) 1 - 10 secs. (adjustable) 1 - 10 secs. (adjustable) Auto / Manual 460 gms. 76 x 56.5 x 117.5 67 x 46 / 35 mm Rail Mounting

POWER SOURCE
ASYN. MOTOR

POWER SOURCE
ASYN. MOTOR

3 Ph Supply Forward Power Reverse Power Recovery Level Current Tripping Level

RPT D2 / RPF D2

RPT D2 / RPF D2

Increasing Foward Current Increasing Reverse Current

13 13

14 16 15 16

17
Td 1 to 10 sec.

18

1 to 10 sec.

T ON

LOAD

ASYN. MOTOR

L O A D

RPF D2
A/M LINK

Relay contact position shown in 'Power off' condition

23