Scribd
Upload
147 views1 page

HDTU Start Up

The unit leak test was carried at a hydrogen pressure of 19.5 kg/cm2 from 1640 hrs on 6/4/06. After satisfactory leak testing at 19.5 kg/cm2, the make up compressor was started at 1230 hrs on 7/4/06 and the system has been pressurized to 29 kg/cm2. Further leak checks will be conducted at system pressures of 29/40/50/60/80/90 kg/cm2 while simultaneously raising reactor temperatures to bring the unit to a feed cut in condition. It was noted that the available HSD feedstock in Tank 584 has a high tint or dark color and this was discussed with SPNM(OMS

Uploaded by

Alex Lee
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
147 views1 page

HDTU Start Up

The unit leak test was carried at a hydrogen pressure of 19.5 kg/cm2 from 1640 hrs on 6/4/06. After satisfactory leak testing at 19.5 kg/cm2, the make up compressor was started at 1230 hrs on 7/4/06 and the system has been pressurized to 29 kg/cm2. Further leak checks will be conducted at system pressures of 29/40/50/60/80/90 kg/cm2 while simultaneously raising reactor temperatures to bring the unit to a feed cut in condition. It was noted that the available HSD feedstock in Tank 584 has a high tint or dark color and this was discussed with SPNM(OMS

Uploaded by

Alex Lee
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 1

From:

Goyari,Gautam Kr.

Sent:
To:
Cc:

Friday, April 07, 2006 3:46 PM


Chatterjee, S.K
Khongwir, L.W; Bora, Kaushik.; Dasgupta, Gautam.; Hazarika, R.C; Chakraborty
,Asit; Gogoi ,B.; Sarma, Pratim.K; Baruah ,S. P
HDTU start up

Subject:

The unit leak test carried out with Hydrogen pressure of 19.5 kg/cm2 since 1640 hrs of 6/4/06.
After satisfactory leak test/checks at 19.5 kg/cm2, Make up compressor (09-KA-RP-002A) was
started up at 1230 hrs of 7/4/06 and the system has been pressurized to 29 kg/cm2. Further the
leak checks will be carried at the system pressure of 29/40/50/60/80/90 kg/cm2. Simultaneously
Reactor temperatures will be raised to bring the unit at Feed Cut in condition.
Note: available HSD Feed stock in Tank no.584, Tint is high (dark in colour), discussed with
SPNM(OMS) to correct the same.
This is for your kind information please.
G.K.Goyari
PNM(HDTF)

You might also like