Sony HCD-CP2

HCD-CP2
SERVICE MANUAL AEP Model

UK Model
E Model
Australian Model
HCD-CP2 is the Amplifier, CD player,

Tape Deck and Tuner section in
CMT-CP2.
Dolby noise reduction manufactured under license Model Name Using Similar Mechanism NEW
from Dolby Laboratories Licensing Corporation. CD
“DOLBY” and the double-D symbol ; are trade- CD Mechanism Type KSL-2130CCP/K1N
Section
marks of Dolby Laboratories Licensing Corporation. Optical Pick-up Name KSS-213C/K1N
Tape deck Model Name Using Similar Mechanism HCD-W550
Section Tape Transport Mechanism Type TCM-220WR2E
SPECIFICATIONS
– Continued on next page –
MICRO HiFi COMPONENT SYSTEM

TABLE OF CONTENTS
1. SERVICING NOTES ............................................... 3
2. GENERAL
Location of Controls ....................................................... 4
Setting the Time .............................................................. 5
3. DISASSEMBLY ......................................................... 6
4. TEST MODE .............................................................. 11
5. MECHANICAL ADJUSTMENTS ....................... 14
6. ELECTRICAL ADJUSTMENTS ......................... 14
7. DIAGRAMS
7-1. Block Diagram – CD Section – ...................................... 19
7-2. Block Diagram – TAPE DECK Section – ...................... 20
7-3. Block Diagram – MAIN Section – ................................. 21
7-4. Block Diagram
– DISPLAY/POWER SUPPLY Section – ...................... 22
7-5. Note for Printed Wiring Boards and
Schematic Diagrams ....................................................... 23
7-6. Printed Wiring Board – CD Section – ............................ 24
7-7. Schematic Diagram – CD Section – ............................... 25
7-8. Printed Wiring Boards – TAPE DECK Section – .......... 26
7-9. Schematic Diagram – TAPE DECK Section – ............... 27
7-10. Printed Wiring Board – MAIN Board – ......................... 28
7-11. Printed Wiring Boards – LCD/LOADING Boards – ..... 29
7-12. Schematic Diagram – MAIN Section (1/3) – ................. 31
7-15. Printed Wiring Boards
– AMP/HEADPHONE Boards – .................................... 34
7-16. Schematic Diagram – POWER AMP Section – ............. 35
7-17. Printed Wiring Board – CONTROL Board – ................. 36
7-18. Schematic Diagram – KEY CONTROL Section – ........ 37
7-19. Printed Wiring Board – POWER Board – ...................... 38
7-20. Schematic Diagram – POWER SUPPLY Section – ....... 38
7-21. IC Pin Function Description ........................................... 44
8. EXPLODED VIEWS ................................................ 47
9. ELECTRICAL PARTS LIST ............................... 54
SAFETY-RELATED COMPONENT WARNING!!

COMPONENTS IDENTIFIED BY MARK 0 OR DOTTED
LINE WITH MARK 0 ON THE SCHEMATIC DIAGRAMS
AND IN THE PARTS LIST ARE CRITICAL TO SAFE
OPERATION. REPLACE THESE COMPONENTS WITH
SONY PARTS WHOSE PART NUMBERS APPEAR AS
SHOWN IN THIS MANUAL OR IN SUPPLEMENTS PUB-
LISHED BY SONY.
2
SECTION 1
SERVICING NOTES
NOTES ON HANDLING THE OPTICAL PICK-UP • MODEL IDENTIFICATION
BLOCK OR BASE UNIT – Rear Panel –
Power Voltage Indication
The laser diode in the optical pick-up block may suffer electro-
static break-down because of the potential difference generated
by the charged electrostatic load, etc. on clothing and the human
body.
During repair, pay attention to electrostatic break-down and also
use the procedure in the printed matter which is included in the
repair parts.
The flexible board is easily damaged and should be handled with
care.
NOTES ON LASER DIODE EMISSION CHECK VOLTAGE SELECTOR

Switch
The laser beam on this model is concentrated so as to be focused
on the disc reflective surface by the objective lens in the optical
pick-up block. Therefore, when checking the laser diode emis-
sion, observe from more than 30 cm away from the objective lens.
Notes on chip component replacement

• Never reuse a disconnected chip component.
• Notice that the minus side of a tantalum capacitor may be dam-
aged by heat.
Flexible Circuit Board Repairing

• Keep the temperature of the soldering iron around 270 ˚C dur-
ing repairing. Model Power Voltage Indication
• Do not touch the soldering iron on the same conductor of the
AEP, UK and
circuit board (within 3 times).
North European and AC: 230 V -50 Hz 70 W
• Be careful not to apply force on the conductor when soldering
Australian models
or unsoldering.
Saudi Arabia, AC: 110 – 120/
Singapore models 220 – 240 V -50/60 Hz 70 W
CAUTION
Use of controls or adjustments or performance of procedures
other than those specified herein may result in hazardous ra-
diation exposure.
This appliance is classified as a CLASS 1 LASER product.

The CLASS 1 LASER PRODUCT MARKING is located on
the rear exterior.
Laser component in this product is capable of emitting radiation

exceeding the limit for Class 1.
The following caution label is located inside the unit.
CAUTION : INVISIBLE LASER RADIATION WHEN OPEN AND

INTERLOCKS DEFEATED. AVOID EXPOSURE TO BEAM.
ADVARSEL : USYNLIG LASERSTRÅLING VED ÅBNING NÅR
SIKKERHEDSAFBRYDERE ER UDE AF FUNKTION. UNDGÅ UDSAETTELSE
FOR STRÅLING.
VORSICHT : UNSICHTBARE LASERSTRAHLUNG, WENN
ABDECKUNG GEÖFFNET UND SICHEREITSVERRIEGELUNG
ÜBERBRÜCKT. NICHT DEM STRAHL AUSSETZEN.
VARO! : AVATTAESSA JA SUOJALUKITUS OHITETTAESSA OLET ALT-
TIINA NÄKYMÄTTÖMÄLLE LASERSÄTEILYLLE. ÄLÄ KATSO SÄTEESEEN.
VARNING : OSYNLING LASERSTRÅLING NÄR DENNA DEL ÄR ÖPPNAD
OCH SPÄRREN ÄR URKOPPLAD. BETRAKTA EJ STRÅLEN.
ADVERSEL : USYNLIG LASERSTRÅLING NÅR DEKSEL ÅPNES OG
SIKKERHEDSLÅS BRYTES. UNNGÅ EKSPONERING FOR STRÅLEN.
VIGYAZAT! : A BURKOLAT NYITÁSAKOR LÁTHATATLAN LÉZERSU-
GÁRVESZÉLY! KERÜLJE A BESUGÁRZÁST!
3
SECTION 2
GENERAL
• LOCATION OF CONTROLS
– Front View –
1 2 345 67 89 0 qa 1 STANDBY ?/1 button and indicator
2 TAPE A m button
3 TAPE A Y button
qs 4 TAPE A x button
qd 5 TAPE A M button
6 HI-SPEED DUBBING button and indicator
qf 7 CD button and indicator
qg
8 TUNER button and indicator
qh
qj 9 DSG button and indicator
qk 0 X button
ql qa CD SYNC button and indicator
w;
wa qs REC z button
ws qd Liquid crystal display
wd qf TAPE B Y button
qg TAPE B x button
qh TAPE B M button
qj TAPE B m button
qk TUNER BAND button
wf wg wh wj wkwl e; ea es ed ef eg
ql TUNING +/– buttons
w; TUNING MODE button
wa EJECT Z button
ws CD u button
wd CD x button
wf Remote sensor
wg PHONES jack
wh VIDEO button and indicator
wj MD button and indicator
wk TAPE button and indicator
wl BASS switch
e; TREBLE switch
ea VOLUME knob
es CD . m button
ed PLAY MODE button
ef CD > M button
– Rear View – eg REPEAT button
1 2
1 AM ANTENNA terminals
2 FM ANTENNA jack or terminals
3 VOLTAGE SELECTOR switch
(Saudi Arabia, singapore models)
4
4 LINE OUT jacks
5
6 5 MD IN jacks
6 VIDEO IN jacks
7
7 DIGITAL OUT OPTICAL (CD) connector
8 SPEAKER terminals
8
3
4
This section is extracted from
instruction manual.
5
SECTION 3
DISASSEMBLY
Note: Follow the disassembly procedure in the numerical order given.
COVER (UPPER)
3 cover (upper)
2 six screws
1 two case screws (BTP3 × 8)
1 two case screws
FRONT PANEL ASSY

2 connector
2 connector (CN805)
(CN808)
2 connector
(CN311)
1 two flat cables

(CN601, 1001)
6 front panel assy (To page 8)
4 screw
(KTP3 × 6)
5 two bosses
1 three flat cables
(CN801, 803, 806)
3 two screws
(BTP3 × 8)
4 screws
(KTP3 × 6)
6
TAPE MECHANISM DECK (TCM-220WR2E)
4 Push these buttons.
1 five screws
(BTP3 × 8)
2 screws (DIA. 12)
3 harness
5 TCM-220WR2E
AUDIO BOARD
1 connector
(CN651)
2 two rivets
4 four screws
(BTP2.6 × 4)
3 Break the soldering of

two flexible flat cables.
5 AUDIO board
7
CAPSTAN MOTOR
2 two screws
3 capstan motor (BTP2.6 × 8)
1 Break the soldering of

motor lead.
CD MECHANISM DECK (KSL-2130CCP/K1N)
3 two screws
(BTP3 × 8)
1 flat cable
(CN301)
2 connector
(CN900)
3 two screws
(BTP3 × 8)
4 CD mechanism deck
(KSL-2130CCP/K1N)
8
CD BOLCK ASSY
2 washer (2130)
3 coil spring (front)
1 two screws
(P2.6 × 10) 1 two screws
(P2.6 × 10)
2 washer (2130)
2 washer (2130)
3 coil spring
(front)
2 washer (2130)
4 CD block assy
TRAY (2130)
1 two screws
(PTPWH2.6 × 7)
2 chucking yoke (K)
6 damper (S)
7 lock lever
4 Pull the tray (2130).

8 Remove the tray (2130). A
5 claw
7 lock lever
3 Rotate the control cam

in the direction of arrow A.
9
• SUB CHASSIS (2130) INSTALLATION
Note: Follow the assembly procedure in the numerical order given.
2 Install the drive gear with gear

position as shown in figure. 5 two screws
(PTPWH2.6 × 7)
gear
3 screw
(PTPWH2.6 × 16)
front side
4 sub chassis (2130)
1 Install the control cam

with gear position as shown
in figure.
gear
front side
10
SECTION 4
TEST MODE
[MC Cold Reset] Aging mode sequence:
• The cold reset clears all data including preset data stored in the
RAM to initial conditions. Execute this mode when returning Start
the set to the customer.
Procedure: Shut off

1. While pressing the ?/1 button, connect the power cord. FWD Play
2. The set is reset.
1 minute
[CD Aging Mode]
REC pause for 3 seconds
This mode can be used for operation check of CD section.
Procedure:
1. Load a CD disc. Shut off
FWD REC
2. Set to standby state.
3. Press three buttons of x (TAPE B), x (CD), and [TUNER]
3 minutes
simultaneously.
4. The aging is executed in bellow sequence. Fast forward
5. To release from the aging mode, press the ?/1 button to turn
the power OFF.
Shut off
Aging mode sequence: REV Play
Start
1 minute
REC pause for 3 seconds
Open the disc tray
Shut off
REV REC
Close the disc tray

3 minutes
Rewind
Play the last track
[Liquid Crystal Display All Lit Check Mode]
[Tape Deck Aging Mode] Procedure:

This mode can be used for operation check of tape deck section. 1. Set to standby state.
2. Press three buttons of x (TAPE B), x (CD), and [VIDEO]
Procedure: simultaneously.
1. Set a tape in the tape deck-B. 3. Liquid crystal display are all turned on.
2. Set to standby state. 4. To release from this mode, press the ?/1 button to turn the
3. Press three buttons of x (TAPE B), x (CD), and [TAPE] power OFF.
simultaneously.
4. The aging is executed in bellow sequence. [ROM Version Display Mode]
5. To release from the aging mode, press the ?/1 button to turn
the power OFF. Procedure:
1. Set to standby state.
2. Press three buttons of x (TAPE B), x (CD), and [DSG] si-
multaneously.
3. The ROM version is displayed.
11
[CD TEST MODE] 2. STOP Mode
In the CD test mode, the set works as following sequence. 1. Press the [EJECTZ] button twice to disc tray open and close.
(All servo ON)
CD test mode sequence: 2. Press the > and . button to move the optical pick-up
to position of the track where signal is recorded.
1. Enter the CD test mode
3. FOCUS Mode
1. Press the u button to enter the FOCUS mode and display
as below. (Focus servo ON. CLV-S, tacking and sled servo OFF)
2. STOP mode
Display
Press the u (CD)
button.
Press the x (CD)
button.
F * * * *
3. FOCUS mode
2. Connect an oscilloscope to TP (TE) and TP (VC) on the CD
Press the u (CD)
board.
button.
Press the x (CD)
button. Connection:
4. ALL SERVO
ON mode
oscilloscope
Press the u (CD) (DC range)
button.
Press the x (CD) BD board
button.
5. LPC OFF
mode TP (TE) +
TP (VC) –
Press the u (CD)
button.
Press the x (CD) 3. Confirm the traverse level and center values of waveform sat-
button. isfy specified value as follows.
6. TRACKING
GAIN UP mode
Traverse waveform
Press the u (CD)
button. Center of the waveform
Note: TRACKING GAIN UP mode is not used in servicing.

A
1. Entering the CD Test Mode 0V B (DC
1. Press the ?/1 button to turn the power ON. voltage)
2. Press the [EJECT Z] button to open the disc tray, and put a
disc. Specified value:
3. Press the [EJECT Z] button to close the disc tray. traverse level A : more than 350 mVp-p
4. Press the ?/1 button to turn the power OFF. center values B : 0 ± 50 mV
5. While pressing the both x (TAPE B) and x (CD) buttons,
press the [CD] (function) button.
6. Enter the CD test mode, and display as below for a few sec-
onds.
Display
AUTO STEREO
F * * * *
Note: Lights up “STEREO” indication :LPC ON
Does not light up “STEREO” indication :LPC OFF
*) LPC: Laser power control
7. Then display as below, and enter the STOP mode.
Display
STEREO
* * * *
12
4. ALL SERVO ON Mode Connecting Location:
1. Press the u button to enter the ALL SERVO ON mode and – CD BOARD (Conductor Side) –
display as below. (All servo ON)
Display TP (GND)
STEREO
PL * * * * TP (TE)
TP (VC) TP (RF)
IC701
2. Connect an oscilloscope to TP (RF) and TP (VC) on the CD
board.
Connection:
oscilloscope
(DC range)
BD board IC703
TP (RF) +
TP (VC) –
3. Confirm the RF level of waveform satisfy specified value as

follows.
RF signal waveform
VOLT/DIV: 200 mV
TIME/DIV: 500 ns
level:
1.2 ± 0.1 Vp-p
Specified value:
RF level: 1 ± 0.3 Vp-p
5. LPC OFF Mode

1. Press the x button to enter the LPC OFF mode and display
as below. (LPC OFF)
Display
PL * * * *
2. Confirm the RF level of waveform is the same as the RF level
in “4. ALL SERVO ON mode”.
If the RF level is down from the RF level in “4. ALL SERVO
ON mode”, measure again after clean the object lens by an
applicator with lens cleaning liquid.
6. Releasing the CD Test Mode

1. Press the x (CD) button to stop rotate the disc.
2. Press the ?/1 button to release the CD test mode and turn the
power OFF.
13
SECTION 5 SECTION 6
MECHANICAL ADJUSTMENTS ELECTRICAL ADJUSTMENTS
PRECAUTION
TAPE DECK SECTION 0 dB=0.775 V
1. Clean the following parts with a denatured-alcohol-moistened
swab: 1. Demagnetize the record/playback head with a head demagne-
record/playback heads pinch rollers tizer. (Do not bring the head demagnetizer close to the erase
erase head rubber belts head)
capstan idlers 2. Do not use a magnetized screwdriver for the adjustments.
2. Demagnetize the record/playback head with a head demagne- 3. After the adjustments, apply suitable locking compound to
tizer. the parts adjust.
3. Do not use a magnetized screwdriver for the adjustments. 4. The adjustments should be performed with the rated power
4. After the adjustments, apply suitable locking compound to supply voltage unless otherwise noted.
the parts adjusted. 5. The adjustments should be performed in the order given in
5. The adjustments should be performed with the rated power this service manual. (As a general rule, playback circuit ad-
supply voltage unless otherwise noted. justment should be completed before performing recording
• Torque Measurement circuit adjustment)
• Tape Tension Measurement 6. The adjustments should be performed for both L-CH and R-
ch.
• Torque Measurement 7. Switches and controls should be set as follows unless other-
wise specified.
Mode Torque Meter Meter Reading
36 to 61 g•cm • Test Tape
Forward CQ-102C
(0.50 – 0.84 oz•inch)
Forward 2 to 6 g•cm Tape Signal Used for
CQ-102C
Back Tension (0.026 – 0.082 oz•inch) P-4-A100 10 kHz, –10 dB Azimuth Adjustment
36 to 61 g•cm WS-48B 3 kHz, 0 dB Tape Speed Adjustment
Reverse CQ-102RC
(0.50 – 0.84 oz•inch)
P-4-L300 315 Hz, 0 dB Level Adjustment
Reverse 2 to 6 g•cm
CQ-102RC
Back Tension (0.026 – 0.082 oz•inch)
Record/ Playback Head Azimuth Adjustment
61 to 143 g•cm
FF, REW CQ-201B
(0.85 – 1.98 oz•inch) DECK A DECK B
• Tape Tension Measurement Note: Perform this adjustments for both decks
Procedure:
Mode Tension Meter Meter Reading
Forward CQ-403A more than 100 g (3.52 oz) test tape MAIN board
Reverse CQ-403R more than 100 g (3.52 oz) P-4-A100 IC401
(10 kHz, –10 dB) Pin 8 (L-CH)
Pin eg (R-CH) level meter
set
+
–
MAIN board
IC401
Pin rs
14
1. Mode: Playback (FWD) Tape Speed Adjustment DECK A
2. Turn the adjustment screw and check output peaks. If the peaks Procedure:
do not match for L-CH and R-CH, turn the adjustment screw Turn the power switch on.
so that outputs match within 1dB of peak. Mode: Playback (FWD)
test tape
WS-48B frequency counter
(3 kHz, 0 dB)
within
1dB +
L-CH set
peak within –
output 1dB
level MAIN board
IC401(Pin 8 : L-CH)
(Pin eg : R-CH)
R-CH
peak
Screw Screw 1. Insert the WS-48B into the deck A and the blank tape into the
position L-CH R-CH position deck B.
peak peak 2. Press the [HI-SPEED DUBBING] button and X button.
Then at HIGH speed dubbing.
3. Mode: Playback (FWD) 3. Adjust RV652 on the AUDIO board do that frequency counter
reads 6,000 ± 180 Hz.
test tape
P-4-A100 4. Press the x (TAPE A or B) button to stop the HIGH speed
(10 kHz, –10 dB) oscilloscope dubbing.
pin 8
L-CH 5. Press the [REC z], X and Y button.
pin rs Then at NORMAL speed dubbing.
MAIN L
board V H 6. Adjust RV651 on the AUDIO board so that frequency counter
IC401 reads 3,000 ± 90 Hz.
set R
7. Press the x (TAPE A or B) button to stop the NORMAL speed
R-CH dubbing.
pin eg 8. Frequency difference between deck A and deck B the begin-
ning of the tape should be within ± 1.5%.
waveform of oscilloscope Adjustment Location: AUDIO and MAIN boards
Sample Value of Wow and flutter: 0.3% or less W. RMS (JIS)

in phase 45 ° 90 ° 135 ° 180 ° (WS-48B)
good wrong
Playback level Adjustment DECK A DECK B
Procedure:
4. Repeat steps 1 to 3 in playback (REV) mode. Mode: Playback (FWD)
5. After the adjustments, apply suitable locking compound to the
pats adjusted. test tape
P-4-L300 level meter
Adjustment Location: Record/Playback Head (Deck A and B) (315 Hz, 0 dB)
and MAIN board.
set +
–
MAIN board
IC401 (Pin 8 : L-CH)
(Pin eg : R-CH)
Deck A is RV311 (L-CH) and RV411 (R-CH), Deck B is RV301

(L-CH) and RV401 (R-CH) so that adjustment within adjustment
reverse
level as follows.
Adjustment Level:
IC401 PB level: 301.5 to 338.3 mV (–8.2 to –7.2 dB) level
difference between the channels: within ± 0.5 dB
Adjustment Location: AUDIO and MAIN boards
forward
15
Record bias Current Adjustment DECK B Adjustment Location:
Procedure:
1. Mode: Record – MAIN BOARD (Component Side) –
Pin 6 (L-CH) of IC401 on the MAIN board.
Pin ej (R-CH) of IC401 on the MAIN board.
1) 315 Hz 
2) 10 kHz  50 mV (–23.8 dB)

AF OSC blank tape
600 Ω CN-123
attenuator
set
Pin rs (GND) of IC401 on the MAIN

board. RV351
2. Mode: Playback RECORD

IC401
LEVEL
recorded level meter
portion
RV301
set +
–

(Pin eg : R-CH)
Confirm playback the signal recorded in step 1 become adjustable

limits as follows.
If these levels do not adjustable limits, adjustment the RV341 (L-
CH) and RV441 (R-CH) on the AUDIO board to repeat steps 1 – AUDIO BOARD (Conductor Side) –
and 2. TAPE SPEED
RECORD









Adjustable limits: Playback output of 315 Hz to playback output BIAS CURRENT (NORMAL) (HIGH)



of 10 kHz: 0 ± 0.5 dB
R L
Adjustment Location: AUDIO and MAIN boards RV651 RV652
RV301
 RV341
L
 RV441  RV311 L
 PB 
Record Level Adjustment DECK B R  PB LEVEL LEVEL  RV411 R
Procedure: RV401 
1. Mode: Record – DECK B – – DECK A –
Pin 6 (L-CH) of IC401 on the MAIN board.

Pin ej (R-CH) of IC401 on the MAIN board.
315 Hz, 50 mV (–23.8 dB)
AF OSC * As the adjustment parts is mounted on the component side, ad-
blank tape
600 Ω CS-123 just it through a hole in the AUDIO board form conductor side.
attenuator (Except RV431, 441)
set
Pin rs (GND) of IC401 on the MAIN board.
2. Mode: Playback
recorded level meter
portion
set +
–

(Pin eg : R-CH)
Confirm playback the signal recorded in step 1 become adjustable

limits as follows.
If these levels do not adjustable limits, adjustment the RV301 (L-
CH) and RV351 (R-CH) on the MAIN board to repeat steps 1 and
2.
Adjustable limits:
IC401 PB level: 36.7 to 41.1 mV (–26.5 to –25.5 dB)
Adjustment Location: MAIN board
16
CD SECTION
Note:
1. CD Block is basically constructed to operate without
adjustment. Therefore, check each item in order given.
2. Use YEDS-18 disc (3-702-101-01) unless otherwise indicated.
3. Use an oscilloscope with more than 10 MΩ impedance.
4. Clean the object lens by an applicator with neutral detergent
when the signal level is low than specified value with the
following checks.
5. Adjust the focus bias adjustment when optical block is replaced.
Focus Bias Check
oscilloscope
(DC range)
BD board
TP (RF) +
TP (VC) –
Procedure :
1. Connect oscilloscope to TP (RF) and TP (GND) on CD board.
2. Turned Power switch on.
3. Put disc (YEDS-18) in and press the [CD u] button to play-
back.
4. Confirm that oscilloscope waveform is as shown in the figure
below. (eye pattern)
A good eye pattern means that the diamond shape ( ) in the
s
center of the waveform can be clearly distinguished.
VOLT/DIV: 200 mV
TIME/DIV: 500 ns
level:
1.2 ± 0.1 Vp-p
Adjustment Location:
– CD BOARD (Conductor Side) –
TP (GND)
IC701
TP (RF)
IC703
17
18
HCD-CP2
SECTION 7
DIAGRAMS
7-1. BLOCK DIAGRAM – CD Section –
DIGITAL SIGNAL PROCESSOR, FILTER

CLV SERVO, D/A CONVERTER
IC703 ERROR 16K
30 33 29 31
INTERNAL BUS
CORRECTOR RAM
PD1 I-V AMP
FILO
CLTV
PCO
FILI
A PD1
38 PCMD PCMDI
41 42
DETECTOR RF RF O RF BCK BCKI OVER
ASYMMETRY EFM
PD2 I-V AMP + SUMMING 33 35 DIGITAL PLL 43 44 SERIAL
SAMPLING NOISE
D/A INTERFACE
CORRECTION DEMODULATOR LRCKI INPUT
A D AMP LRCK DIGITAL SHAPER
D PD2 RF I ASYI 39 40 INTERFACE
39 32 37 FILTER
GTOP/
ASYO C2PO/
I-V AMP
C 38
XPCK/MNTO/XPCK C2PO
FOCUS OK 50
B C 48 PWM
AMP
B FOCUS OK FOK FOK
27 18 PWM
COMPARATOR
F
F
SERVO AUTO SEQUENCER

SUB-CODE AOUT1
E MIRR DATA DATO 65
E 22 12 PROCESSOR
AMP TTL CLK CLKO AOUT2
TTL 20 14 76
RF AMP,
IIL DATA REGISTER

XLT XLTO
FOCUS/TRACKING DEFECT 21 13
IIL LOCK
SERVO AMP IIL 19 C4M 75 66
XRST RFCK/MNT1/XUGF 52
IC701 (1/2) 23 79 XRST 47
AIN2
AIN1
WFCK
DIGITAL 56 CLOCK XTSL
SENS1 SEIN CPU INTERFACE EMPH 51
IIL 25 10 CLV 54 55 GENERATOR
C.OUT CNIN
24 11 XROF/MNT3/GFS EMPHI
XLON (MUTE)
SPOA (LIMIT)
SENS2 49
SYSM (MUTE)
TTL 26 OSC
OPTICAL PICK-UP DOUT
SQSO
SCOR
DIGITAL
SQCK
SBSO
SENS
DATA
CLOK
EXCK
XLAT
MDP
53
LOUT2
LOUT1
(KSS-213C/K1N)
XTAO
FOCUS OUT
XTAI
FEO FEI FOCUS PHASE FE O
ERROR 1 2 6
COMPENSATION 21 5 4 6 7 9 8 57 58 59 17 15
AMP
62 70 71 74 67
FE BIAS
40 S701
B+ (LIMIT)
X701
F 16.9344MHz
41 TRACKING TEO TEI TA O
I-V TRACKING PHASE R-CH
E ERROR 45 47 13
LASER DIODE 42 AMP COMPENSATION
AMP
CD L-CH
LD AUTOMATIC LD LD PD
POWER CONTROL 36
AMP AMP
Q701
A
PD
PD LD (Page 21)
37 52 51 54 77 76 67 62
PD
C-SQCK
C-DATA
C-CLK
C-XLAT
C-SCOR
CD-SENS1
C-SQSO
FOCUS/TRACKING COIL DRIVE, 4 C-XRST C-MUTE 69
SPINDLE/SLED MOTOR DRIVE
IC702 OPTICAL OPTICAL
55 SENS2 TRANSCEIVER DIGITAL
2-AXIS IC308 OUT (CD)
DEVICE T+
T+ SYSTEM CONTROLLER
17 TRACKING (TIN)
(TRACKING)
T– 20 IC802 (1/4)
COIL DRIVE
(FOCUS)
18
T–
F+ F+
26 FOCUS FIN
F– F– 25
27 COIL DRIVE
SLED SERVO
IC701 (2/2)
SL+
M702 2 SLED SLIN SL O SLED SL P
(SLED)
M SL– MOTOR DRIVE
3 16
AMP
14
1
SP+ • SIGNAL PATH

M701 12 SPINDLE SPIN SPO SPIN
(SPINDLE)
M SP– MOTOR DRIVE
9 14 15
11 : CD PLAY (ANALOG OUT)
MUTE
7 : CD PLAY (DIGITAL OUT)
05
R-CH : Same as L-CH.
19 19
HCD-CP2
7-2. BLOCK DIAGRAM – TAPE DECK Section –

DECK PROCESS
DECK A/B SELECT, PB/REC EQ AMP,
DOLBY NR AMP • SIGNAL PATH
IC401
: PLAYBACK (DECK A)
HP101 DOLBY PASS
(PLAYBACK) : PLAYBACK (DECK B)
70 PBOUT (L) PB-L
PB EQ AMP
L-CH 2
AIN (L)
DOLBY NR
8 B
(DECK A)
AMP
: RECORD
IC611 BIN (L) (Page 21)
4 120 CIRCUIT
RV311
PB LEVEL (L) R-CH + R-CH : Same as L-CH
R-CH R-CH (DECK A)
EQOUT
L.P.F. (L)
RECOUT (L)
REC
NORM 11
EQ AMP
EQIN (L)
25 BIAS
RIN (L)
CROM BUFFER
24 CONTROL
METAL CIRCUIT
23 MAOUT
HRPE101 (1/2)
28 6 9 10
(RECORD/PLAYBACK)
PB EQ AMP
NORM/CROM/METAL
(DECK B)
L-CH IC601 27
MSIN
REC/PB/PASS
BIAS-ON/OFF
NORM/HIGH
RV301
RM-ON/OFF
LM-ON/OFF
NR-ON/OFF
RV301
A 120/70
PB LEVEL (L) AMS
PB-A/B
CIRCUIT REC LEVEL (L)
(DECK B) (DECK B)
R-CH R-CH
MSOUT
REC-L
13 15 12 20 16 17 18 19 14 21 C
(Page 21)
REC/PB SWITCHING D822

IC602 S1004 LED DEIVE HI-SPEED
3 1 (DECK A 120/70) Q816 DUBBING
R-CH R-CH
S1008
(DECK B 120/70) REC/PB
4 D
(Page 22)
2
C331, L331 RV652 RV651

BIAS
TAPE SPEED TAPE SPEED
TRAP
R-CH (HIGH) (NORMAL)
Q406
CAPSTAN MOTOR M1
CONTROL SWITCH M (CAPSTAN)
RV341 Q651
RV441
REC BIAS (R) REC BIAS (L)
(DECK B) (DECK B) ROTATION ROTATION
DETECT SENSOR DETECT SENSOR CAPSTAN
(DECK A) (DECK B) MOTOR CONTROL
REC BIAS B+ Q1001 Q1002 Q403, 407
SWITCH (A+8V)
Q623
BIAS OSC
HRPE101 (2/2) T621 68 1 75 7 79 78 8 80 3 16 17 10 9 +12V (M)
(ERASE)
REC/PB
A/B
T-PLAY (B) LINE MUTE
REC-BIAS
REC-MUTE
DOLBY
REC/PB
NORMAL/HI
HI DUB REC
TC-SHUT (A)
TC-SHUT (B)
CAP MOTOR H/L
CAP MOTOR CON

TRIG MOTOR CON (A)
TRIG MOTOR CON (B)
BIAS OSC
Q621, 622
TRIG MOTOR H/L

SYSTEM CONTROLLER
T-PLAY (A)
T-HALF (A)
IC802 (2/4)
T-MODE
15 18 14 39 13 12 11
TRIGGER MOTOR DRIVE

S1003 S1006 IC402
(DECK A HALF) (DECK B HALF)
05 D+5V S1005
(DECK A REC) IN1 OUT1
S1001 S1002 5 MOTOR 2 M2
(DECK A PLAY) (DECK B PLAY) 6
IN2
DRIVE
OUT2
10
M (TRIGGER)
S1009 VZ
(DECK B REC) 4
D+5V
TRIGGER
MOTOR CONTROL
Q408, 409
20 20
HCD-CP2
7-3. BLOCK DIAGRAM – MAIN Section –
REC-L
PB-L C
(Page 20) B (Page 20)
PJ303 (1/2)
INPUT SELECT SWITCH,
L TONE CONTROL,
ELECTRICAL VOLUME
MD IN IC301
R R-CH LINE AMP
L PJ303 (2/2)
IC302
TAPE-L LINE OUT
INPUT SELECT SWITCH

MUTING
L 12 R-CH R
Q101
VIDEO IN MD-L
MUTING 11
R R-CH CD-L R-CH
Q102, 103 VIDEO-L
14
TU-L MO-L IN-L VOLUME TONE LOUT R-CH J301
TUNER ON 13 15 16 CONTROL CONTROL ATT 6
(Page 22) E R-CH
CIRCUIT CIRCUIT PHONES
ROUT 5 R-CH
SDA
SCL
CD-LCH
(Page 19) A MUTING
30 1
Q120
MUTING
Q106 R-CH
SJ301
POWER AMP SPEAKER
R-CH D304
TUNER PACK IC101 IMPEDANCE
USE 6-16Ω
L-CH 2
MUTING
3 IN+ OUT 14
R-CH 3 R-CH
CONTROL SWITCH
Q317, 318
+
71 SDA L
70 SCK
–
MUTE
STBY
DI 10 20 TU-DATA
LED DRIVE D812
MD 56
Q869 MD
9 10 –
R
CE 11 23 TU-CE R-CH +
LED DRIVE D821
VIDEO 60
FM 75Ω FM ANT Q815 VIDEO
ANT GND DO 8 22 TU-COUNT MUTING

AU MUTE 74 CONTROL SWITCH
Q303, 304
SYSTEM CONTROLLER
ANT GND IC802 (3/4)
CK 9 21 TU-CLK
AM OVER LOAD
AM ANT AMP-STBY 2 R-CH DETECT
Q331, 332
(AEP, UK, North European)
ANTENNA
RDS DECODER
IC803 AMP-MUTE 6 R-CH
RDATA 2 24 RDS-DATA
BAND-PASS
FM-DET 4 FILTER 4 MUX
Q830 RCLK 16 61 RDS-CLK SPEAKER ON/OFF SPEAKER PROTECT
SPEAK RELAY 5 SWITCH RELAY DRIVE
XI XO Q335, 337 Q333, 336
RY101
13 14
X803
4.332MHz TX 34
X800
TUNED 5 19 TU-TUNED 32.768kHz
TEX 35
XTAL1 32
X801
4.19MHz
05 EXTAL1 31
DISC TRAY OPEN/CLOSE

MOTOR DRIVE
IC309
TRAY-OPEN 65 5 INPUT1 OUT1 2

M
TRAY-CLOSE 66 6 INPUT2 OUT2 10
M901
DISC TRAY • SIGNAL PATH
OPEN/CLOSE
: TUNER (FM/AM)
S901 : CD PLAY
TRAY-SW 45
(DISC TRAY CLOSE DET)
: TAPE PLAY
S902 : RECORD
(DISC TRAY OPEN DET)
R-CH : Same as L-CH
21 21
HCD-CP2
7-4. BLOCK DIAGRAM – DISPLAY/POWER SUPPLY Section –
REC/PB
D
D804
(Page 20) BACK UP +5V
LCD DRIVER SYSTEM CONTROLLER
IC800 IC802 (4/4) SYSTEM CONTROLLER (IC802) B+
RESET SIGNAL
1–12, 34–41, 42–48, 50–55
RESET 30 GENERATOR
IC801 (AEP, UK, North European, Australian)
CAD 26 26 C/D
CS 24 27 LCD DATA POWER TRANSFORMER
S0 – S31
SI 23 28 LCD CLK (SUB)

REG-CON 64
SCK 22 29 LCD CE T902
D808 +5.6V
RECT
LIQUID CRYSTAL REGULATOR
RESET 27 47 LCD-XRST D903 – 906
DISPLAY IC310
LCD801 D809
D807 D657 – 660 B+ SWITCH
COM0 – COM3
(LCD BACK LIGHT) Q804, 805

30 – 33
SWITCHING
Q323, 324
Q806
D806 B+ SWITCH
CASSETTE HOLDER
BACK LIGHT Q850, 851
D811 LED DRIVE (Saudi Arabia, Singapore)

53 DSG
DSG Q808
D820 Q812
STANDBY LED DRIVE
I/1 Q814
RY901
D810 LED DRIVE
59 CD SYNC
CD SYNC Q807
LED DRIVE D817

TAPE 48
Q813 TAPE
B+ SWITCH
LED B+
D823 Q800, 801
REMOTE CONTROL (DISC TRAY ILLUMINATION)
RECEIVER 56 REMOCON
IC804
FM 7.5V
+7.5V
FM CIRCUIT B+
REGULATOR
RDS DECODER
Q314
(IC803) B+
REGULATOR
RV801 ROTARY 57 JOG-A RDS-ON 25 CONTROL SWITCH
ENCODER Q315, 316
VOLUME 46 JOG-B
RV801 +5V
LED DRIVE D813 +5V
REGULATOR
Q810 CD CD BLOCK B+
Q310
REGULATOR
S800 – 815, 817 – 833 CD 50 CONTROL SWITCH
Q311, 312 +12V
TDA7439 (IC301) B+
KEY1 – KEY5
TRIGGER MOTOR DRIVE (IC402) B+

40 – 44
RELAY B+
D814 +9.5V
LED DRIVE +9.5V
REGULATOR
Q811 TUNER TUNER BLOCK B+
Q313
POWER TRANSFORMER
REGULATOR (MAIN)
TUNER 49 CONTROL SWITCH T901
Q321, 322 D315
POWER AMP B+ RECT AEP, UK, North European,
(IC101, 201) B– D907 – 910 Australian
05
+8V +8V
CD BLOCK, DISC TRAY OPEN/ REGULATOR
CLOSE MOTOR DRIVER (IC309) B+ IC311
+8V +12V AC IN
+8V REGULATOR REGULATOR RECT
IC304 IC306 D911 – 914
AUDIO
CIRCUIT VOLTAGE
–8V SELECTOR
–8V REGULATOR S901
IC305
(Saudi Arabia, Singapore)
TUNER ON
E (Page 21)
22 22
HCD-CP2
• Circuit Boards Location 7-5. NOTE FOR PRINTED WIRING BOARDS AND SCHEMATIC DIAGARAMS
Note on Printed Wiring Board: Note on Schematic Diagram:

• X : parts extracted from the component side. • All capacitors are in µF unless otherwise noted. pF: µµF
POWER board
• Y : parts extracted from the conductor side. 50 WV or less are not indicated except for electrolytics
• x : parts mounted on the conductor side. and tantalums.
• b : Pattern from the side which enables seeing. • All resistors are in Ω and 1/ 4 W or less unless otherwise
TUNER board (The other layers' patterns are not indicated.) specified.
AUDIO board • 5 : fusible resistor.
Note: The components identified by mark 0 or dotted line
with mark 0 are critical for safety.
LEAF SWITCH board Replace only with part number specified.
• U : B+ Line.
• V : B– Line.
• H : adjustment for repair.
• Voltages are taken with a VOM (Input impedance 10 MΩ).
AMP board Voltage variations may be noted due to normal produc-
LCD board
tion tolerances.
• Waveforms are taken with a oscilloscope.
Voltage variations may be noted due to normal produc-
tion tolerances.
CONTROL board • Circled numbers refer to waveforms.
• Signal path.
F : TUNER (FM/AM)
E : PLAYBACK (DECK A)
d : PLAYBACK (DECK B)
a :RECORD
J : CD PLAY (ANALOG OUT)
c : CD PLAY (DIGITAL OUT)
HEADPHONE board • Abbreviation
AUS : Australian model
AED : North European model
EA : Saudi Arabia model
SP : Singapore model
MAIN board
LOADING board
CD board
23 23
HCD-CP2
7-6. PRINTED WIRING BOARD – CD Section – • See page 23 for Circuit Boards Location.
• Semiconductor
Location
Ref. No. Location
IC701 C-5
IC702 C-2
IC703 F-5
Q701 B-6
(Page 28)
24 24
HCD-CP2
7-7. SCHEMATIC DIAGRAM – CD Section – • See page 30 for Waveforms. • See page 39 for IC Block Diagrams.
(Page 32)
• Voltages and waveforms are dc with respect to ground

under no-signal conditions.
no mark : CD PLAY
∗ : Impossible to measure
The components identified by mark 0 or dotted
line with mark 0 are critical for safety.
Replace only with part number specified.
25 25
HCD-CP2
7-8. PRINTED WIRING BOARDS – TAPE DECK Section – • See page 23 for Circuit Boards Location.
) ( )
TO ( )
(Page 28) MOTOR
BOARD
–
TO
AUDIO
BOARD ( )
+
B
C
E
05
C B
B C
B C
05
(DECK B PLAY)
(DECK A PLAY)
05
(DECK A HALF) (DECK A 120/70) (DECK A REC) (DECK B HALF)

c (Page 28)
(DECK B 120/70) (DECK B REC)
26 26
HCD-CP2
7-9. SCHEMATIC DIAGRAM – TAPE DECK Section – • See page 30 for Waveform. • See page 42 for IC Block Diagram.
(Page 31)
(Page 31)
BMETAL
• Voltages and waveforms are dc with respect to ground
under no-signal conditions.
no mark : TAPE PLAY
( ) : RECORD

27 27
HCD-CP2 7-10. PRINTED WIRING BOARD – MAIN Board – • See page 23 for Circuit Boards Location.
• Semiconductor
Location
Ref. No. Location
D301 C-7
D304 H-5
D314 I-9
D315 B-8
D317 B-9
D318 H-9
D319 B-7
D320 G-7
D321 G-7
D322 E-5
D323 C-7
D324 D-5
D325 D-5
D330 I-5
D331 I-5 (Page 29)
D804 F-1
D805 B-6
D806 I-5
D807 I-5
D808 I-6 (Page 29) (Page 29) (Page 26)
D809 I-6
D815 I-5
D816 F-1
IC301 D-7
IC302 C-9
IC304 I-9
IC305 I-7
IC306 I-9
IC308 E-9
IC309 C-5
IC310 H-9
IC311 I-8
IC401 G-8 (Page 26)
IC402 F-9
IC800 F-3 (Page 24)
IC801 H-2
IC802 I-2
IC803 B-5
Q101 C-9
Q102 D-9
Q103 D-9
Q106 B-9
Q201 C-9
Q202 D-9
Q203 D-9 (Page 36)
Q206 A-9
Q303 I-5
Q304 I-5
Q310 I-9
Q311 I-9
Q312 I-9
Q313 B-9
Q314 B-8
Q315 B-8
Q316 B-8
Q317 H-5
Q318 H-5
Q321 B-9
Q322 B-9
Q323 H-9
Q324 H-9
Q403 F-9
Q406 G-9
Q407 G-9 (Page 34)
Q408 F-9
Q409 G-9
Q800 I-7
Q801 I-7
Q804 I-6
Q805 I-7
Q806 I-6
Q830 B-6
Q850 I-6
Q851 I-5
(Page 38)
28 28
7-11. PRINTED WIRING BOARDS – LCD/LOADING Boards –
• See page 23 for Circuit Boards Location.
CN804 CN802
(Page 28) (Page 28)
LOADING BOARD
CN900
S901
DISC TRAY
S902
DISC TRAY F
CLOSE DET OPEN DET
M901
DISC TRAY
5 (Page
OPEN/CLOSE
28)
M
1-640-523-
11
05
29
• Waveforms
– CD Board – – MAIN Board –
1 IC701 1 (FEO) (CD Play Mode) 6 IC703 rd (BCK) (CD Play Mode) 1 IC802 es (XTAL1)
Approx.
200 mVp-p 6.4 Vp-p 5.2 Vp-p
4.19 MHz
472 ns
2 IC701 ed (RF O), IC703 eg (RF)
(CD Play Mode) 7 IC703 u; XTAI (CD Play Mode) 2 IC802 ef (TX)
1.2 ± 0.1 Vp-p 4.3 Vp-p 5.2 Vp-p
16.9344 MHz 32.768 kHz
3 IC701 rg (TEO) (CD Play Mode) 3 IC803 qd (XI)
Approx. 2.9 Vp-p

100 mVp-p
– AUDIO Board –
4.332 MHz
1 Q621, 622 (Collector)
4 IC703 wa (MDP) (CD Play Mode) (Record Mode) 4 IC803 qh (RCLK)
2.8 Vp-p
18.4 Vp-p 4.4 Vp-p
7.6 µs 11.3 µs 840 µs
5 IC703 el (LRCK) (CD Play Mode)
6.6 Vp-p
22.8 µs
30
HCD-CP2
7-12. SCHEMATIC DIAGRAM – MAIN Section (1/3) – • See page 42 for IC Block Diagrams.
(Page 27)
(Page 32)
(Page 27)
• Voltages are dc with respect to ground under no-signal { } : TAPE PLAYBACK (DECK A)
(detuned) conditions. [ ] : TAPE PLAYBACK (DECK B)
no mark : TUNER (FM/AM) 〈〈 〉〉 : RECORD
( ) : CD PLAY < > : MD/VIDEO
(Page 33)
31 31
HCD-CP2
7-13. SCHEMATIC DIAGRAM – MAIN Section (2/3) – • See page 43 for IC Block Diagram.
(Page 38)
(Page 35)
(Page 33)
(Page 31)
(Page
33) (Page 33)
(Page 33)
(Page 25)
(Page 33)
• Voltages are dc with respect to ground under no-signal { } : TAPE PLAYBACK (DECK A)
(detuned) conditions. [ ] : TAPE PLAYBACK (DECK B)
32 32
HCD-CP2
7-14. SCHEMATIC DIAGRAM – MAIN Section (3/3) – • See page 30 for Waveforms. • See page 43 for IC Block Diagram.
(Page 32)
(Page 32)
(Page 32)
(Page (Page 37)

32)
• Voltages and waveforms are dc with respect to ground { } : TAPE PLAYBACK (DECK A)
under no-signal (detuned) conditions. [ ] : TAPE PLAYBACK (DECK B)
(Page 32)
(Page 31)
33 33
HCD-CP2
7-15. PRINTED WIRING BOARDS – AMP/HEADPHONE Boards – • See page 23 for Circuit Boards Location.
• Semiconductor
Location
Ref. No. Location
D311 D-1
IC101 B-4
IC201 B-5
Q120 E-2
Q220 E-3
Q331 D-2
Q332 D-1
Q333 D-1
Q335 E-2
Q336 D-2
Q337 E-2
JR103
L305
L304
TO
AMP
BOARD L306
(Page 38) (Page 28) TO HEADPHONE

BOARD
34 34
HCD-CP2
7-16. SCHEMATIC DIAGRAM – POWER AMP Section – • See page 43 for IC Block Diagram.
(Page 32)
(Page 38)
• Voltages are dc with respect to ground under no-signal

(detuned) conditions.
no mark : TUNER (FM/AM)
( ) : CD PLAY
{ } : TAPE PLAYBACK (DECK A)
[ ] : TAPE PLAYBACK (DECK B)
〈〈 〉〉 : RECORD
< > : MD/VIDEO
35 35
HCD-CP2
7-17. PRINTED WIRING BOARD – CONTROL Board – • See page 23 for Circuit Boards Location.
• Semiconductor
Location
Ref. No. Location
D810 A-3
D811 B-5
D812 C-7
D813 C-6
D814 C-5
D817 C-6
D820 B-8
D821 C-7
D822 A-6
D823 D-6
IC804 D-8
Q807 A-4
Q808 C-4
Q809 C-7
Q810 C-6
Q811 C-5
Q812 B-7
Q813 C-6
Q814 C-8
Q815 C-7
Q816 B-6
(Page 28)
36 36
HCD-CP2
7-18. SCHEMATIC DIAGRAM – KEY CONTROL Section –
(Page 33)
• Voltages are dc with respect to ground under no-signal

(detuned) conditions.
no mark : TUNER (FM/AM)
37 37
HCD-CP2
7-19. PRINTED WIRING BOARD – POWER Board –
• See page 23 for Circuit Boards Location.
(Page 28) (Page 34) 7-20. SCHEMATIC DIAGRAM – POWER SUPPLY Section –
(Page 35)
(Page 32)

• Semiconductor
Location
Ref. No. Location
D902 E-3
D903 B-2
D904 B-2
D905 A-2
D906 A-2
D907 A-5
D908 A-5
D909 B-5
D910 B-5
D911 A-3
D912 A-3
D913 A-2
D914 A-2
38 38
• IC Block Diagrams
– CD Board –
IC701 CXA1992BR
RF M
RFTC
RF O
PD1
CC1
FOK
PD2
RF I
CC2
PD
LD
CP
CB
39 38 37 36 35 34 33 32 31 30 29 28 27
PD 2 PD 1 PD LD
I-V AMP I-V AMP AMP AMP RF SUMMING
AMP FOCUS OK
COMPARATOR
VCC
LASER
POWER
CONTROL
IFB1 – IFB6
PEAK/BOTTOM MIRR
HOLD COMPARATOR IIL
↓
FE PEAK/BOTTOM DEFECT TTL
40
BIAS HOLD AMP
FOCUS BIAS
FOCUS ERROR
WINDOW
VEE AMP
COMPARATOR
DFCT1
LDON
MIRR
LPCL
TGFL
LPC
FOH
FOL
CC1
F I-V
F 41
AMP
IIL 26 SENS2
E I-V TRACKING GAIN
TGH ↓ 25 SENS1
E 42 TGFL TTL
AMP WINDOW TGL 24 C. OUT
COMPARATOR
EI 43 BALH IIC DATA REGISTER, INPUT SHIFT REGISTER,
ADDRESS DECODER, SENSE SELECTOR,
VEE 44 VEE BALL 23 XRST
OUTPUT DECODER
TEO 45 TTL 22 DATA
ATSC
TOG1 – TOG4
BAL1 – BAL4
↓ 21 XLT
IIL 20 CLK
19 LOCK
TZC
FZC
E-F BALANCE
LPFI 46 WINDOW
TG1 – TG2
PS1 – PS4
FS1 – FS4
DFCTO
IFB1 – IFB6
BAL1 – BAL4
TOG1 – TOG4
TM1 – TM7
COMPARATOR VCC 18 VCC

TEI 47 VCC
ATSC
ATSC 48 WINDOW ISET 17 ISET
COMPARATOR TM6
TZC 16 SL O
TZC 49
COMPARATOR
TM1 15 SL M
DFCT TRACKING PHASE

–
COMPENSATION
TDFCT 50 14 SL P
TG1
+
TM5
VCC
TM2
CENTER VEE
VCC
VC 51 VOLTAGE
GENERATOR TM7
FZC
FZC 52 VCC TM4
COMPARATOR
VEE
FOCUS PHASE FS1

CHARGE UP
COMPENSATION
–
+
DFCT FS4 FS2

FSET
TG2 TM3
VEE VEE
1 2 3 4 5 6 7 8 9 10 11 12 13
FSET
FEO
TA O
SRCH
FLB
FE O
FDFCT
TA M
TGU
TG2
FE M
FEI
FGD
39
IC702 BA6898FP-E2
VREF IN
OUT4-B
OUT4-A
OUT3-A
OUT3-B
OPIN-B
GND
VCC
VCC
,
,
IN4
IN4
IN3
IN3
NC
28 27 26 25 24 23 22 21 20 19 18 17 16 15
NC
VCC VCC
LEVEL SHIFT + LEVEL SHIFT

–
– –
+ +
+ +
– REGULATOR –
+
–
DRIVER
BIAS, T. S. D
MUTE
MONITOR
LEVEL SHIFT LEVEL SHIFT
–
+
1 2 3 4 5 6 7 8 9 10 11 12 13 14
OUT1-A
OUT1-B
IN1
RESET
REG-B
REGOUT
MUTE
GND
IN2
OUT2-A
OUT2-B
GND
OPOUT
IN2
40
IC703 CXD2589Q
PCMDI
ENPHI
PCMD
EMPH
WFCK
SCOR
DOUT
SBSO
C2PO
XPCK
XUGF
EXCK
XTSL
BCKI
C4M
VDD
VSS
VSS
BCK
GFS
60 59 58 57 56 55 54 53 52 51 50 49 48 47 46 45 44 43 42 41
VDD 61
SYSM 62
SERIAL-IN
PWM
INTERFACE
40 LRCKI
39 LRCK
AVSS 63
OVER SAMPLING 38 ASYO

DIGITAL FILTER
37 ASYI
EFM ASYMMETRY
DEMODULATOR CORRECTOR
AVDD 64 36 BIAS
35 RF
3rd-ORDER
NOISE SHAPER 34 AVDD
AOUT1 65
AIN1 66
LOUT1 67 33 CLTV
AVSS 68 ERROR 16k
XVDD 69 CORRECTOR RAM 32 AVSS
XTAI 70 OSC SUB CODE
PROCESSOR DIGITAL 31 FILI
PLL
PWM 30 FILO
XTAO 71
29 PCO
DIGITAL D/A
XVSS 72 OUT INTERFACE
28 V16M
OSC
27 VCTL
AVSS 73
26 VCKI
CLOCK
25 VPCO1
GENERATOR
24 TES1
LOUT2 74
23 TES0
AIN2 75
AOUT2 76 CPU 22 PWMI
INTERFACE DIGITAL
AVDD 77 SERVO CLV
AUTO 21 MDP
AVSS 78
SEQUENCER
XRST 79
VDD 80
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
VSS
LMUTE
RMUTE
SQCK
SQSO
SENS
DATA
XLAT
CLOK
SEIN
CNIN
DATO
XLTO
CLKO
SPOA
SPOB
XLON
FOK
VDD
VSS
41
– AUDIO Board –
IC602 µPC1330HA
INVERTER
COMPARATER
1 2 3 4 5 6 7 8 9
SW R1 GND SW P1 CONT GND VCC SW P2 GND SW R2
– MAIN Board –
IC301 TDA7439
MUX OUT (R)
TREBLE (R)
TREBLE (L)
MOUT (R)
MOUT (L)
BOUT (R)
BOUT (L)
DIG GND
MIN (R)
MIN (L)
BIN (R)
BIN (L)
SCL
INR
INL
30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
VOLUME VOLUME
TREBLE TREBLE
MIDDLE MIDDLE
BASS BASS
SPEAKER SPEAKER
ATTENUATOR ATTENUATOR
IIC BUS
DECODER &
LATCH
VREF
GAIN AMP GAIN AMP
SUPPLY
MULTIPLEXER MULTIPLEXER
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
SDA
CREF
ROUT
LOUT
R-IN4
R-IN3
R-IN2
R-IN1
L-IN1
L-IN2
L-IN3
L-IN4
MUX OUT (L)

VS
AGND
42
IC309, 402 KA3082 IC803 BU1924F-E2 (AEP, UK, North European models)
VDD2
RCLK
VSS2
NC
XO
T1
T2
XI
DRIVER OUT 16 15 14 13 12 11 10 9
PRE DRIVER
DIGITAL
BIAS
CLOCK TEST
LOGIC TSD
SWITCH PLL 57kHz
RDS/ARI
1 2 3 4 5 6 7 8 9 10 PLL
1187.5Hz COMPARATOR
GND
OUT1
VZ1
VCTL
IN1
IN2
VCC1
VCC2
VZ2
OUT2
8th SWITCHED
BIPHASE CAPACITOR
DECODER FILTER
ANALOG
DEFFERENTIAL ANTI-ALIASING
DECODER FILTER
1 2 3 4 5 6 7 8
QUAL
VREF
MUX
VDD1
VSS1
VSS3
CMP
RDAT
– AMP Board –
IC101, 201 TDA7296
THERMAL
BIPOLAR SHUTDOWN
TRANSCONDACTANCE
INPUT STAGE
– MOS GAIN & MOS SHORT
LEVEL SHIFTING OUTPUT CIRCUIT
+
STAGE STAGE PROTECTION
STANDBY/
MUTE
BOOST-
STRAP
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
STBY-GND
IN–
IN+
IN+ MUTE
NC
BOOSTSTRAP
+VS
–VS
STBY
MUTE
NC
NC
+PWVS
OUT
–PWVS
43
7-21. IC PIN FUNCTION DESCRIPTION
• MAIN BOARD IC802 CXP84332-168Q (SYSTEM CONTROLLER)
Pin No. Pin Name I/O Description
1 A/B O Deck-A/B selection signal output to the HA12203NT (IC401) “L”: deck-A, “H”: deck-B
2 AMP-STBY O Standby on/off control signal output to the power amplifier (IC101, 201) “L”: standby mode
3 HI DUB REC O High speed dubbing control signal output to the HA12203NT (IC401)
4 C-XRST O Reset signal output to the CXA1992BR (IC701) and CXD2589Q (IC703) “L”: reset
5 SPEAK RELAY O Speaker protect relay drive signal output terminal “H”: relay on
6 AMP-MUTE O Muting on/off control signal output to the power amplifier (IC101, 201) “H”: muting on
Recording bias on/off selection signal output to the HA12203NT (IC401)
7 REC-BIAS O
“L”: bias on, “H”: bias off
Recording/playback/pass selection signal output to the HA12203NT (IC401)
8 REC/PB O
“L”: recording mode, “H”: pass, “Hi-z”: playback mode
CAP MOTOR
9 O Capstan motor on/off control signal output terminal “H”: motor on
CON
CAP MOTOR High/normal speed selection signal output of the capstan motor
10 O
H/L “L”: normal speed, “H”: high speed
TRIG MOTOR Deck-A side trigger motor drive signal output to the trigger motor drive (IC402)
11 O
CON (A) “H”: motor on
TRIG MOTOR Deck-B side trigger motor drive signal output to the trigger motor drive (IC402)
12 O
CON (B) “H”: motor on
TRIG MOTOR
13 O Trigger motor control signal output terminal
H/L
Detection input from the deck-A cassette detect switch (S1003)
14 T-HALF (A) I
“L”: cassette in, “H”: no cassette
15 T-PLAY (A) I Detection input from the deck-A play detect switch (S1001) “H”: deck-A play
16 TC-SHUT (A) I Shut off detection signal input from the deck-A side reel pulse detector (Q1001)
17 TC-SHUT (B) I Shut off detection signal input from the deck-B side reel pulse detector (Q1002)
18 T-PLAY (B) I Detection input from the deck-B play detect switch (S1002) “H”: deck-B play
19 TU-TUNED I Tuning detection signal input from the tuner pack “L”: tuned
20 TU-DATA O PLL serial data output to the tuner pack
21 TU-CLK O PLL serial data transfer clock signal output to the tuner pack
22 TU-COUNT I PLL serial data input from the tuner pack
23 TU-CE O PLL chip enable signal output to the tuner pack
RDS serial data input from the RDS decoder (IC803)
24 RDS-DATA I
(Used for the AEP, UK and North European models only)
Power supply on/off control signal output of the tuner pack (+7.5V) and RDS decoder (IC803)
25 RDS-ON O
26 C/D O Command data output to the liquid crystal display driver (IC800)
27 LCD DATA O Serial data output to the liquid crystal display driver (IC800)
28 LCD CLK O Serial data transfer clock signal output to the liquid crystal display driver (IC800)
29 LCD CE O Chip enable signal output to the liquid crystal display driver (IC800)
System reset signal input from the reset signal generator (IC801) “L”: reset
30 RESET I
For several hundreds msec. after the power supply rises, “L” is input, then it changes to “H”
31 EXTAL1 I Main system clock input terminal (4.19 MHz)
32 XTAL1 O Main system clock output terminal (4.19 MHz)
33 VSS — Ground terminal
34 TX O Sub system clock output terminal (32.768 kHz)
35 TEX I Sub system clock input terminal (32.768 kHz)
36 AVSS — Ground terminal (for A/D converter)
44
37 AVREF I Reference voltage (+5V) input terminal (for A/D converter)
38 SIMUKE I Destination setting terminal (A/D input)
39 T-MODE I Detection input from the deck-B half detect switch (S1006)
Key input terminal (A/D input)
40 KEY1 I
S800 to S807 (TUNING –/+, REC z, TAPE B m/M/x/Y, TUNER BAND keys input)
Key input terminal (A/D input) S808 to S815 (CD x/u, TUNING MODE, REPEAT, PLAY
41 KEY2 I
MODE,CD . m/> M, EJECT Z keys input)
42 KEY3 I
S817 to S823 (DSG, VIDEO, MD, TAPE, CD, TUNER, STANDBY I/1 keys input)
43 KEY4 I
S824 to S831 (X, CD SYNC, HI-SPEED DUBBING, TAPE A m/M/x/Y keys input)
44 KEY5 I Key input terminal (A/D input) S832 and S833 (BASS, TREBLE keys input)
Disc tray position detect switch (S901, S902) input terminal (A/D input)
45 TRAY-SW I
“L”: close position, “M”: open position, “H”: moving
46 JOG-B I Jog dial pulse input from the rotary encoder (RV801 VOLUME) (B phase input)
47 LCD-XRST O Reset signal output to the liquid crystal display driver (IC800) “L”: reset
Power supply on/off control signal output of the cassette holder back light
48 TAPE O
LED drive signal output of the TAPE indicator (D817) “H”: back light on (LED on)
Power supply on/off control signal output of the tuner pack (+9.5V)
49 TUNER O
LED drive signal output of the TUNER indicator (D814) “H”: tuner power on (LED on)
Power supply on/off control signal output of the CD block (+5V)
50 CD O
LED drive signal output of the CD indicator (D813) “H”: CD power on (LED on)
51 C-SQCK O Subcode Q data reading clock signal output to the CXD2589Q (IC703)
52 C-SQSO I Subcode Q data input from the CXD2589Q (IC703)
LED drive signal output of the DSG (Dynamic Sound Generator) indicator (D811)
53 DSG O
“H”: LED on
Internal status detection monitor input from the CXD2589Q (IC703)
54 CD-SENS1 I
(for FZC, DFCT1, TZC, etc.)
55 SENS2 I Internal status detection monitor input from the CXA1992BR (IC701) (for MIRR, DFCT2, etc.)
56 REMOCON I Sircs remote control signal input from the remote control receiver (IC804)
57 JOG-A I Jog dial pulse input from the rotary encoder (RV801 VOLUME) (A phase input)
MD function control signal output terminal
58 MD O LED drive signal output of the MD indicator (D812)
“H”: MD (LED on) (“L” output when other functions)
59 CD SYNC O LED drive signal output of the CD SYNC indicator (D810) “H”: LED on
VIDEO function control signal output terminal
60 VIDEO O LED drive signal output of the VIDEO indicator (D821)
“H”: VIDEO (LED on) (“L” output when other functions)
Serial data reading clock signal input from the RDS decoder (IC803)
61 RDS-CLK I
62 C-SCOR I Subcode sync (S0+S1) detection signal input from the CXD2589Q (IC703)
63 WP I Wake up control signal input terminal
64 REG-CON O Main system power supply on/off control signal output terminal “H”: power on
65 TRAY-OPEN O Motor drive signal output to the disc tray open/close motor drive (IC309) “H” active *1
66 TRAY-CLOSE O Motor drive signal output to the disc tray open/close motor drive (IC309) “H” active *1
*1 Disc tray open/close motor (M901) control
Mode
Stop Table In Table Out Brake
Terminal
TRAY-OPEN (pin yg ) “L” “L” “H” “H”
TRAY-CLOSE (pin yh ) “L” “H” “L” “H”
45
67 C-XLAT O Serial data latch pulse output to the CXD2589Q (IC703)
Recording/playback selection signal output to the REC/PB switching (IC602)
68 REC/PB O
“L”: playback mode, “H”: recording mode
69 C-MUTE O Muting on/off control signal output to the CXD2589Q (IC703)
70 SCK O Serial data transfer clock signal output to the TDA7439 (IC301)
71 SDA O Serial data output to the TDA7439 (IC301)
72 VDD — Power supply terminal (+5V)
73 NC — Connected to power supply (+5V)
74 AU MUTE O Muting on/off control signal output terminal “H”: muting on
Line muting on/off selection signal output to the HA12203NT (IC401)
75 LINE MUTE O
“L”: muting off, “H”: muting on
76 C-CLK O Serial data transfer clock signal output to the CXD2589Q (IC703)
77 C-DATA O Serial data output to the CXD2589Q (IC703)
Dolby NR on/off selection signal output to the HA12203NT (IC401)
78 DOLBY O
“L”: dolby off, “H”: dolby on
Recording muting on/off selection signal output to the HA12203NT (IC401)
79 REC-MUTE O
“L”: muting off, “H”: muting on
Normal/high speed selection signal output to the HA12203NT (IC401)
80 NORMAL/HI O LED drive signal output of the HI-SPEED DUBBING indicator (D822)
“L”: normal speed, “H”: high speed (LED on)
46
SECTION 8
EXPLODED VIEWS
NOTE:
• -XX and -X mean standardized parts, so they • Items marked “*” are not stocked since they The components identified by
may have some difference from the original are seldom required for routine service. Some mark 0 or dotted line with mark
one. delay should be anticipated when ordering 0 are critical for safety.
Replace only with part number
• Color Indication of Appearance Parts these items. specified.
Example: • The mechanical parts with no reference num-
KNOB, BALANCE (WHITE) . . . (RED) ber in the exploded views are not supplied.
↑ ↑ • Hardware (# mark) list is given in the last of
Parts Color Cabinet's Color the electrical parts list.
• Abbreviation
(1) GENERAL SECTION
TCM-220WR2E 5
#3
#1
7
4
6 #1
#1
2 #1
#2
#1
#2
Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark
1 4-222-365-01 SPRING (CASSETTE B) 5 4-222-370-01 COVER (UPPER)
2 4-222-364-01 SPRING (CASSETTE A) 6 4-221-580-01 SCREW, CASE
3 X-4951-962-1 HOLDER (A) SUB ASSY, CASSETTE 7 3-831-441-99 SPACER
4 X-4951-963-1 HOLDER (B) SUB ASSY, CASSETTE
47
(2) FRONT PANEL SECTION
60
#2
56
59
55 62
57
58
not supplied
67 69
69
63
62
54 #1
63
64 #1
53 66
65
70 #1 69
52
51
68
supplied with
RV801
51 X-4952-108-1 KNOB ASSY 61 4-222-376-01 BRACKET (LCD)
52 4-222-401-01 BUTTON (BASS) 62 1-418-482-11 ILLUMINATION BLOCK, LED
53 X-4951-956-1 PANEL SUB ASSY, FRONT (AEP, UK, AED) 63 4-222-388-01 SPRING (CASSETTE LID)
53 X-4952-135-1 PANEL SUB ASSY, FRONT (EA, SP, AUS) 64 4-222-394-01 BRACKET (CASSETTE LID A)
54 4-222-362-01 WINDOW (CASSETTE) 65 4-222-395-01 BRACKET (CASSETTE LID B)
55 4-222-368-01 SHEET (CASSETTE) 66 1-791-435-11 WIRE (FLAT TYPE) (21 CORE) (105mm)
56 4-222-363-01 LID, CASSETTE 67 A-4426-637-A CONTROL BOARD, COMPLETE
57 1-791-437-11 WIRE (FLAT TYPE) (17 CORE) 68 4-218-204-01 FOOT (FRONT)
58 1-791-438-11 WIRE (FLAT TYPE) (21 CORE) (180mm) 69 4-931-757-31 SCREW (DIA.2.6X8) (IT3B), TAPPING
59 1-675-150-11 LCD BOARD 70 1-675-153-11 HEADPHONE BOARD
60 4-217-319-01 PLATE, LCD LIGHT
48
(3) CHASSIS SECTION
114
102 UK
115
103
#4
#1
113
#4
#1
#1
T901
104
#1
#1
#1
#1
not
supplied not
#1 supplied #1
106 105
not supplied
110 108
#1
111
109
not
107 supplied
101
112 #1
#1

101 4-222-377-01 CHASSIS (LOWER) 107 A-4473-065-A AMP BOARD, COMPLETE (AUS)
102 1-675-155-11 POWER BOARD 108 1-791-436-11 WIRE (FLAT TYPE) (21 CORE)
103 4-222-361-01 PANEL, BACK (AEP, UK, AED) 109 1-791-434-11 WIRE (FLAT TYPE) (11 CORE)
103 4-222-361-21 PANEL, BACK (EA, SP) 110 4-931-757-31 SCREW (DIA.2.6X8) (IT3B), TAPPING
103 4-222-361-31 PANEL, BACK (AUS) * 111 4-217-354-01 BUSHING, INSULATING
104 1-675-154-11 RETAINER BOARD 112 4-217-355-01 FOOT

105 A-4426-641-A MAIN BOARD, COMPLETE (AEP, UK, AED) 113 4-217-332-01 LID, CD
105 A-4426-844-A MAIN BOARD, COMPLETE (EA, SP) 0 114 1-690-608-11 CORD, POWER (WITH CONNECTOR) (AUS)
105 A-4428-617-A MAIN BOARD, COMPLETE (AUS) 0 114 1-696-169-11 CORD, POWER
106 A-4411-460-A TUNER PACK (AEP, UK, AED) 0 115 1-770-019-11 ADAPTOR, CONVERSION PLUG 3P (UK)
106 A-4426-617-A TUNER PACK (EA, SP, AUS) 0 T901 1-435-100-11 TRANSFORMER, POWER (AEP, UK, AED, AUS)
107 A-4426-642-A AMP BOARD, COMPLETE (AEP, UK, AED) 0 T901 1-435-101-11 TRANSFORMER, POWER (EA, SP)
107 A-4426-842-A AMP BOARD, COMPLETE (EA, SP)
49
(4) CD MECHANISM DECK SECTION-1
(KSL-2130CCP/K1N)
157 158
159
not
supplied 157
156 160
161
155
not
supplied
154 162
not
supplied 153
not
supplied not
supplied
151
152
M901
163
164
165
165
166
169
167
167
#5
165
166
#5
167
#5
* 151 2-646-290-01 TRAY (2130) 161 3-319-501-51 SCREW (+PTPWH) (2.6X16)
152 2-625-541-02 DAMPER (S) * 162 2-646-288-01 CHASSIS (2130), SUB
153 2-625-279-01 SCREW (B 2.6X2.5), + * 164 1-640-523-11 LOADING BOARD
154 2-625-274-02 GEAR, MIDWAY * 165 2-627-234-01 INSULATOR
155 2-625-276-02 PULLEY, LOADING 166 2-627-235-01 SPRING (REAR), COIL
156 3-653-387-00 BELT, LM 167 2-646-289-01 WASHER (2130)

157 2-626-294-01 SCREW (+PTPWH) (2.6X7) 168 2-641-386-01 SCREW (2X5), TAPPING (S)
* 158 2-625-284-05 PLATE, CHUCKING 169 2-627-236-01 SPRING (FRONT), COIL
159 1-452-493-21 MAGNET M901 X-2625-117-1 MOTOR ASSY, LOADING
160 2-625-286-03 PULLEY, CHUCKING
50
(5) CD MECHANISM DECK SECTION-2
(KSL-2130CCP/K1N)
not supplied
205
208 206
203
207
not supplied
202
M701
209
M702
204
201
#6

201 A-4405-850-A CD BOARD, COMPLETE 207 3-713-786-51 SCREW +P 2X3
202 2-625-188-02 GEAR (A) 208 2-641-386-01 SCREW (2X5), TAPPING (S)
203 2-627-003-02 GEAR (B) (RP) 209 1-773-113-11 WIRE (FLAT TYPE) (16 CORE)
204 1-773-126-11 WIRE (FLAT TYPE) (19 CORE) M701 X-2646-381-1 MOTOR CHASSIS ASSY (MB) (SPINDLE)
205 2-626-908-01 SHAFT, SLED M702 X-2625-769-1 MOTOR GEAR ASSY (MB) (RP) (SLED)
0 206 8-820-070-02 OPTICAL PICK-UP KSM-213CCP/K1N
51
(6) TAPE MECHANISM DECK SECTION-1
(TCM-220WR2E)
#8
272
(including z C)
271
zA
274 275
#9 #8
265 273
264
HP101
(including z A)
not supplied 270 rB
266
262
257 271 zA
259 263 264
256 261 265
258
270
267
not supplied 266 zB
255 260 271
not supplied
#9 274
268 262 #9
254 HRPE101 269
(including z B) 257
263
253 256 259 261
252 251 #7
not supplied 255
258
not supplied
260
254
not supplied 253
not supplied
252 #7
251
251 3-908-560-01 SPRING, AZIMUTH ADJUSTMENT 265 3-917-141-01 SPRING, COMPRESSION

252 3-919-684-01 SCREW, AZIMUTH ADJUSTMENT 266 X-3371-305-1 REEL (T) ASSY
253 X-3373-113-1 SLIDER (HEAD) ASSY 267 3-669-465-01 WASHER (1.5), STOPPER
254 3-009-956-11 SPRING, HEAD TOGGLE 268 X-3370-173-1 TU ASSY
255 3-908-558-02 FITTING BLOCK, HEAD * 269 4-980-439-01 FULCRUM, HOLDER
256 3-908-557-02 ROTARY BLOCK, HEAD 270 3-917-142-01 SPRING, COMPRESSION

* 257 3-908-559-01 STOPPER, AZIMUTH 271 3-939-862-01 CLIP
258 3-908-555-01 SLIDER (REV SLIDER) * 272 A-2007-435-A AUDIO BOARD, COMPLETE
259 3-917-143-11 SPRING, TENSION 273 3-930-972-01 DETENT, HALF
260 3-388-848-01 SCREW (P2X6) (B TIGHT) 274 3-354-963-01 DAMPER
261 3-939-371-01 SPRING (1), TENSION 275 3-938-863-01 STOPPER

262 X-3369-909-1 PINCH LEVER (REV) ASSY HP101 1-500-093-11 HEAD, MAGNETIC (PLAYBACK) (DECK A)
263 X-3369-908-1 PINCH LEVER (FWD) ASSY HRPE1011-500-094-11 HEAD, MAGNETIC (REC/PB/ERASE) (DECK B)
264 3-908-613-01 GEAR (S), REEL
52
(7) TAPE MECHANISM DECK SECTION-2
(TCM-220WR2E)
M2
318 zC
319
#11
#12
321
310
317 320 #11
321
302 311
A
316
310 322
309
#7
313
315
307 306
319
308 305
312 324
323 307
314 A
313 304
not #5
supplied
303
301
#10 302
M1
#10
301 3-908-597-01 CAM (A) 314 X-3370-171-1 FLYWHEEL (BR) ASSY
302 3-908-608-11 SCREW, STEP 315 3-908-600-01 LEVER (REV-B)
303 X-3372-930-1 ARM (A) ASSY, FR * 316 1-650-669-11 LEAF SWITCH BOARD
304 X-3370-882-1 FLYWHEEL (AR) ASSY 317 3-908-598-01 CAM (B)
305 3-928-047-01 PULLEY, TENSION 318 X-3372-931-1 ARM (B) ASSY, FR
306 3-908-599-01 LEVER (REV-A) 319 3-911-114-01 SPRING (FR), TORSION

307 3-908-601-01 SPRING (REV LEVER), TORSION 320 3-908-604-01 LEVER (TRIGGER B)
308 3-908-603-01 LEVER (TRIGGER A) 321 3-911-115-01 WASHER, STOPPER
309 X-3367-593-1 FLYWHEEL (BF) ASSY 322 X-3371-441-1 CHASSIS ASSY, MECHANICAL
310 3-908-605-01 SPRING (TRIGGER), TORSION 323 3-917-176-11 BELT (B)
311 3-908-609-01 GEAR, TRIGGER 324 X-3370-172-1 FLYWHEEL (AF) ASSY

312 3-913-845-11 BELT (A) M1 X-3371-223-1 MOTOR ASSY, CAPSTAN
313 3-913-846-11 BELT (FR) M2 A-2004-410-A MOTOR ASSY, DC (TRIGGER)
53
SECTION 9
AMP ELECTRICAL PARTS LIST
NOTE:
• Due to standardization, replacements in the • Items marked “*” are not stocked since they The components identified by
parts list may be different from the parts speci- are seldom required for routine service. mark 0 or dotted line with mark
fied in the diagrams or the components used Some delay should be anticipated when order- 0 are critical for safety.
Replace only with part number
on the set. ing these items. specified.
• -XX and -X mean standardized parts, so they • SEMICONDUCTORS
may have some difference from the original In each case, u: µ, for example:
When indicating parts by reference
one. uA. . : µA. . uPA. . : µPA. . number, please include the board.
• RESISTORS uPB. . : µPB. . uPC. . : µPC. .
All resistors are in ohms. uPD. . : µPD. .
METAL: Metal-film resistor. • CAPACITORS
METAL OXIDE: Metal oxide-film resistor. uF: µF
F: nonflammable • COILS
• Abbreviation uH: µH
A-4426-642-A AMP BOARD, COMPLETE (AEP, UK, AED) IC201 8-759-584-39 IC TDA7296
A-4426-842-A AMP BOARD, COMPLETE (EA, SP)
A-4473-065-A AMP BOARD, COMPLETE (AUS) < SHORT >
*********************
JR101 1-216-295-00 SHORT 0
* 4-217-354-01 BUSHING, INSULATING JR102 1-216-295-00 SHORT 0
4-931-757-31 SCREW (DIA.2.6X8) (IT3B), TAPPING
< COIL >
< CAPACITOR >
L101 1-420-872-00 COIL, AIR-CORE
C121 1-126-963-11 ELECT 4.7uF 20% 50V L201 1-420-872-00 COIL, AIR-CORE
C122 1-164-161-11 CERAMIC CHIP 0.0022uF 10% 100V
C123 1-104-665-11 ELECT 100uF 20% 16V < TRANSISTOR >
C125 1-164-004-11 CERAMIC CHIP 0.1uF 10% 25V Q120 8-729-920-31 TRANSISTOR DTC343TK-T-146
Q220 8-729-920-31 TRANSISTOR DTC343TK-T-146
C126 1-126-965-11 ELECT 22uF 20% 50V Q331 8-729-230-91 TRANSISTOR 2SC2785-HFE
C127 1-130-495-00 MYLAR 0.1uF 5% 50V Q332 8-729-230-91 TRANSISTOR 2SC2785-HFE
C132 1-104-665-11 ELECT 100uF 20% 16V Q333 8-729-801-84 TRANSISTOR 2SB1013-TP-34
C133 1-130-495-00 MYLAR 0.1uF 5% 50V
C221 1-126-963-11 ELECT 4.7uF 20% 50V Q335 8-729-900-53 TRANSISTOR DTC114EKA-T146
Q336 8-729-801-84 TRANSISTOR 2SB1013-TP-34
C222 1-164-161-11 CERAMIC CHIP 0.0022uF 10% 100V Q337 8-729-027-46 TRANSISTOR DTC114YK-T146
C223 1-104-665-11 ELECT 100uF 20% 16V
C224 1-164-004-11 CERAMIC CHIP 0.1uF 10% 25V < RESISTOR >
C226 1-126-965-11 ELECT 22uF 20% 50V R121 1-216-190-00 RES, CHIP 470 5% 1/8W
R123 1-216-045-00 METAL CHIP 680 5% 1/10W
C227 1-130-495-00 MYLAR 0.1uF 5% 50V R124 1-216-081-00 METAL CHIP 22K 5% 1/10W
C232 1-104-665-11 ELECT 100uF 20% 16V R125 1-216-091-00 METAL CHIP 56K 5% 1/10W
C233 1-130-495-00 MYLAR 0.1uF 5% 50V R126 1-216-097-00 RES, CHIP 100K 5% 1/10W
C311 1-126-955-11 ELECT 4700uF 20% 35V
C340 1-126-955-11 ELECT 4700uF 20% 35V R127 1-216-150-91 RES, CHIP 10 5% 1/8W
R128 1-216-150-91 RES, CHIP 10 5% 1/8W
C344 1-126-961-11 ELECT 2.2uF 20% 50V R221 1-216-190-00 RES, CHIP 470 5% 1/8W
C345 1-104-666-11 ELECT 220uF 20% 16V R223 1-216-045-00 METAL CHIP 680 5% 1/10W
C349 1-126-965-11 ELECT 22uF 20% 50V R224 1-216-081-00 METAL CHIP 22K 5% 1/10W
C350 1-126-965-11 ELECT 22uF 20% 50V
R225 1-216-091-00 METAL CHIP 56K 5% 1/10W
< CONNECTOR > R226 1-216-097-00 RES, CHIP 100K 5% 1/10W
R227 1-216-150-91 RES, CHIP 10 5% 1/8W
* CN310 1-568-936-11 PIN, CONNECTOR 9P R228 1-216-150-91 RES, CHIP 10 5% 1/8W
CN311 1-506-469-11 PIN, CONNECTOR 4P R328 1-216-097-00 RES, CHIP 100K 5% 1/10W
< DIODE > R329 1-216-093-11 RES, CHIP 68K 5% 1/10W

R330 1-216-089-00 RES, CHIP 47K 5% 1/10W
D311 8-719-200-02 DIODE IN4002AT-93 R331 1-216-121-00 RES, CHIP 1M 5% 1/10W
R332 1-216-073-00 METAL CHIP 10K 5% 1/10W
< IC > R333 1-216-049-11 RES, CHIP 1K 5% 1/10W
IC101 8-759-584-39 IC TDA7296 R334 1-216-097-00 RES, CHIP 100K 5% 1/10W
54
AMP AUDIO
R336 1-216-065-00 RES, CHIP 4.7K 5% 1/10W < CONNECTOR >
R340 1-216-073-00 METAL CHIP 10K 5% 1/10W
R341 1-216-073-00 METAL CHIP 10K 5% 1/10W CN601 1-695-382-31 PIN, CONNECTOR (PC BOARD) 21P
R342 1-216-065-00 RES, CHIP 4.7K 5% 1/10W CN602 1-564-718-11 PIN, CONNECTOR (SMALL TYPE) 2P
* CN651 1-564-521-11 PLUG, CONNECTOR 6P
R343 1-216-065-00 RES, CHIP 4.7K 5% 1/10W
< IC >
< RELAY >
IC601 8-759-111-44 IC uPC4570C-1
RY101 1-515-921-11 RELAY (12V) IC602 8-759-143-54 IC uPC1330HA
IC611 8-759-111-44 IC uPC4570C-1
< TERMINAL BOARD >
< COIL >
SJ301 1-694-598-11 TERMINAL BOARD 4P (SPEAKER)
************************************************************** L331 1-410-780-11 INDUCTOR 27mH
L431 1-410-780-11 INDUCTOR 27mH
* A-2007-435-A AUDIO BOARD, COMPLETE
********************** < TRANSISTOR >
(including MOTOR BOARD)
Q621 8-729-142-46 TRANSISTOR 2SC2001TP-LK
< CAPACITOR > Q622 8-729-142-46 TRANSISTOR 2SC2001TP-LK
Q623 8-729-026-68 TRANSISTOR 2SD2525 (TP)
C301 1-162-289-31 CERAMIC 390PF 10% 50V Q651 8-729-900-65 TRANSISTOR 2SA1345-TP
C302 1-126-968-11 ELECT 100uF 20% 6.3V
C303 1-162-282-31 CERAMIC 100PF 10% 50V < RESISTOR >
C304 1-130-483-00 MYLAR 0.01uF 5% 50V
C305 1-107-715-11 ELECT 22uF 20% 16V R301 1-247-881-00 CARBON 120K 5% 1/4W
R302 1-249-409-11 CARBON 220 5% 1/4W
C311 1-162-289-31 CERAMIC 390PF 10% 50V R303 1-249-433-11 CARBON 22K 5% 1/4W
C314 1-130-487-00 MYLAR 0.022uF 5% 50V R305 1-247-858-11 CARBON 13K 5% 1/4W
C315 1-126-233-11 ELECT 22uF 20% 50V
C331 1-137-427-11 FILM 120PF 5% 50V R311 1-247-881-00 CARBON 120K 5% 1/4W
R312 1-247-807-31 CARBON 100 5% 1/4W
C333 1-162-209-31 CERAMIC 27PF 5% 50V R315 1-247-850-11 CARBON 6.2K 5% 1/4W
C402 1-126-968-11 ELECT 100uF 20% 6.3V
R402 1-249-409-11 CARBON 220 5% 1/4W
C413 1-162-282-31 CERAMIC 100PF 10% 50V
R412 1-247-807-31 CARBON 100 5% 1/4W
C431 1-137-427-11 FILM 120PF 5% 50V R415 1-247-850-11 CARBON 6.2K 5% 1/4W
C433 1-162-209-31 CERAMIC 27PF 5% 50V
C601 1-104-396-11 ELECT 10uF 20% 16V R601 1-249-409-11 CARBON 220 5% 1/4W
R602 1-249-409-11 CARBON 220 5% 1/4W
C621 1-137-150-11 FILM 0.01uF 5% 100V
C622 1-126-961-11 ELECT 2.2uF 20% 50V R612 1-249-409-11 CARBON 220 5% 1/4W
0 R621 1-212-851-00 FUSIBLE 5.6 5% 1/4W F
C623 1-136-155-00 FILM 0.015uF 5% 50V 0 R622 1-212-851-00 FUSIBLE 5.6 5% 1/4W F
C627 1-124-903-11 ELECT 1uF 20% 50V
C628 1-136-153-00 FILM 0.01uF 5% 50V R625 1-249-429-11 CARBON 10K 5% 1/4W
R651 1-247-856-00 CARBON 11K 5% 1/4W
C651 1-161-494-00 CERAMIC 0.022uF 25V R653 1-249-441-11 CARBON 100K 5% 1/4W

55
AUDIO CD
< VARIABLE RESISTOR > C745 1-124-584-00 ELECT 100uF 20% 10V
C746 1-163-181-00 CERAMIC CHIP 100PF 5% 50V
RV301 1-238-598-11 RES, ADJ, CARBON 2.2K
RV311 1-238-598-11 RES, ADJ, CARBON 2.2K C750 1-163-009-11 CERAMIC CHIP 0.001uF 10% 50V
RV341 1-238-551-11 RES, ADJ, CARBON 220K C751 1-163-021-11 CERAMIC CHIP 0.01uF 10% 50V
RV411 1-238-598-11 RES, ADJ, CARBON 2.2K C753 1-124-584-00 ELECT 100uF 20% 10V
RV441 1-238-551-11 RES, ADJ, CARBON 220K
< TRANSFORMER > C760 1-107-823-11 CERAMIC CHIP 0.47uF 10% 16V
C761 1-163-227-11 CERAMIC CHIP 10PF 0.5PF 50V
T621 1-423-980-11 TRANSFORMER, BIAS OSCILLATION
************************************************************** C763 1-163-005-11 CERAMIC CHIP 470PF 10% 50V
C764 1-163-227-11 CERAMIC CHIP 10PF 0.5PF 50V
A-4405-850-A CD BOARD, COMPLETE C765 1-163-001-11 CERAMIC CHIP 220PF 10% 50V
******************* C768 1-163-021-11 CERAMIC CHIP 0.01uF 10% 50V
1-785-953-11 CONNECTOR, FFC/FPC
< CAPACITOR > C772 1-163-021-11 CERAMIC CHIP 0.01uF 10% 50V
C773 1-124-584-00 ELECT 100uF 20% 10V
C701 1-163-017-00 CERAMIC CHIP 0.0047uF 5% 50V C774 1-163-037-11 CERAMIC CHIP 0.022uF 10% 25V
C706 1-124-589-11 ELECT 47uF 20% 16V C781 1-163-007-11 CERAMIC CHIP 680PF 10% 50V
C707 1-163-063-91 CERAMIC CHIP 0.022uF 10% 50V C782 1-126-163-11 ELECT 4.7uF 20% 50V
C709 1-115-339-11 CERAMIC CHIP 0.1uF 10% 50V C790 1-163-121-00 CERAMIC CHIP 150PF 5% 50V
C792 1-126-163-11 ELECT 4.7uF 20% 50V
C711 1-163-231-11 CERAMIC CHIP 15PF 5% 50V C793 1-163-021-11 CERAMIC CHIP 0.01uF 10% 50V
C715 1-124-234-00 ELECT 22uF 20% 16V
< CONNECTOR >
C717 1-163-021-11 CERAMIC CHIP 0.01uF 10% 50V * CNP702 1-569-913-11 S0CKET, CONNECTOR 19P
C718 1-135-181-21 TANTALUM CHIP 4.7uF 20% 6.3V
C719 1-124-589-11 ELECT 47uF 20% 16V < FERRITE BEAD >
FB701 1-469-144-21 FERRITE 0uH
C721 1-115-185-11 CERAMIC CHIP 0.033uF 10% 50V FB702 1-469-144-21 FERRITE 0uH
C725 1-163-062-00 CERAMIC CHIP 0.018uF 10% 50V < IC >
C727 1-163-227-11 CERAMIC CHIP 10PF 0.5PF 50V IC701 8-752-082-14 IC CXA1992BR
C728 1-124-589-11 ELECT 47uF 20% 16V IC702 8-759-473-42 IC BA6898FP-E2
C729 1-126-162-11 ELECT 3.3uF 20% 50V IC703 8-752-384-13 IC CXD2589Q
C731 1-163-243-11 CERAMIC CHIP 47PF 5% 50V < SHORT >
C732 1-163-021-11 CERAMIC CHIP 0.01uF 10% 50V JR701 1-216-295-00 SHORT 0
C736 1-163-251-11 CERAMIC CHIP 100PF 5% 50V JR702 1-216-295-00 SHORT 0
C739 1-163-251-11 CERAMIC CHIP 100PF 5% 50V JR705 1-216-295-00 SHORT 0
C743 1-124-589-11 ELECT 47uF 20% 16V JR709 1-216-295-00 SHORT 0
C744 1-124-472-11 ELECT 470uF 20% 10V JR711 1-216-296-00 SHORT 0
56
CD CONTROL
JR712 1-216-296-00 SHORT 0
JR713 1-216-296-00 SHORT 0 R722 1-216-097-00 RES, CHIP 100K 5% 1/10W
R723 1-216-263-00 RES, CHIP 510K 5% 1/8W
JR715 1-216-296-00 SHORT 0 R725 1-216-101-00 METAL CHIP 150K 5% 1/10W
JR719 1-216-296-00 SHORT 0
R728 1-216-097-00 RES, CHIP 100K 5% 1/10W
JR725 1-216-296-00 SHORT 0
JR726 1-216-296-00 SHORT 0 R734 1-216-218-00 RES, CHIP 6.8K 5% 1/8W
R735 1-216-071-00 METAL CHIP 8.2K 5% 1/10W
JR730 1-216-296-00 SHORT 0
JR731 1-216-296-00 SHORT 0 R739 1-216-071-00 METAL CHIP 8.2K 5% 1/10W
R741 1-216-049-11 RES, CHIP 1K 5% 1/10W
JR735 1-216-296-00 SHORT 0
R747 1-216-089-00 RES, CHIP 47K 5% 1/10W
JR740 1-216-296-00 SHORT 0
R765 1-216-049-11 RES, CHIP 1K 5% 1/10W
JR743 1-216-296-00 SHORT 0 R768 1-216-121-00 RES, CHIP 1M 5% 1/10W
R771 1-216-073-00 METAL CHIP 10K 5% 1/10W
< COIL>
R772 1-216-105-00 RES, CHIP 220K 5% 1/10W
L701 1-410-993-11 INDUCTOR 1uH R780 1-216-075-00 METAL CHIP 12K 5% 1/10W
R781 1-216-075-00 METAL CHIP 12K 5% 1/10W
< TRANSISTOR > R782 1-216-075-00 METAL CHIP 12K 5% 1/10W
R790 1-216-075-00 METAL CHIP 12K 5% 1/10W
Q701 8-729-101-07 TRANSISTOR 2SB798-T1-DLDK
R791 1-216-075-00 METAL CHIP 12K 5% 1/10W
< RESISTOR > R792 1-216-075-00 METAL CHIP 12K 5% 1/10W
R793 1-216-041-00 METAL CHIP 470 5% 1/10W
R701 1-216-095-00 METAL CHIP 82K 5% 1/10W R794 1-216-025-00 RES, CHIP 100 5% 1/10W
R702 1-216-242-00 RES, CHIP 68K 5% 1/8W R795 1-216-238-91 RES, CHIP 47K 5% 1/8W
R703 1-216-242-00 RES, CHIP 68K 5% 1/8W
R705 1-216-242-00 RES, CHIP 68K 5% 1/8W
< SWITCH >
R706 1-216-095-00 METAL CHIP 82K 5% 1/10W
R707 1-216-105-00 RES, CHIP 220K 5% 1/10W S701 1-762-812-11 SWITCH, LEAF (LIMIT)
R708 1-216-295-00 SHORT 0
R709 1-216-101-00 METAL CHIP 150K 5% 1/10W < VIBRATOR >
R711 1-216-101-00 METAL CHIP 150K 5% 1/10W
X701 1-767-226-11 VIBRATOR, CRYSTAL (16.9344MHz)
R712 1-216-109-00 METAL CHIP 330K 5% 1/10W **************************************************************
R713 1-216-295-00 SHORT 0
R714 1-216-073-00 METAL CHIP 10K 5% 1/10W A-4426-637-A CONTROL BOARD, COMPLETE
R715 1-216-073-00 METAL CHIP 10K 5% 1/10W *************************
R716 1-216-070-00 METAL CHIP 7.5K 5% 1/10W
< CAPACITOR >
R717 1-216-097-00 RES, CHIP 100K 5% 1/10W
R718 1-216-117-00 METAL CHIP 680K 5% 1/10W C819 1-124-259-11 ELECT 4.7uF 20% 50V
R719 1-216-150-91 RES, CHIP 10 5% 1/8W C820 1-163-021-11 CERAMIC CHIP 0.01uF 10% 50V
R720 1-216-075-00 METAL CHIP 12K 5% 1/10W
R721 1-216-080-00 METAL CHIP 20K 5% 1/10W
57
CONTROL
< CONNECTOR > R825 1-216-047-00 RES, CHIP 820 5% 1/10W
R826 1-216-069-00 METAL CHIP 6.8K 5% 1/10W
CN807 1-569-937-11 SOCKET, CONNECTOR 21P R828 1-216-061-00 METAL CHIP 3.3K 5% 1/10W
R829 1-216-055-00 METAL CHIP 1.8K 5% 1/10W
< LED > R830 1-216-051-00 METAL CHIP 1.2K 5% 1/10W
D810 8-719-074-42 LED SLR325VR-T31 (CD SYNC) R831 1-216-047-00 RES, CHIP 820 5% 1/10W
D811 8-719-074-42 LED SLR325VR-T31 (DSG) R832 1-216-045-00 METAL CHIP 680 5% 1/10W
D812 8-719-074-40 LED SLR325DU-T31 (MD) R833 1-216-047-00 RES, CHIP 820 5% 1/10W
D813 8-719-074-40 LED SLR325DU-T31 (CD) R834 1-216-043-00 RES, CHIP 560 5% 1/10W
D814 8-719-074-40 LED SLR325DU-T31 (TUNER) R835 1-216-065-00 RES, CHIP 4.7K 5% 1/10W
D817 8-719-074-40 LED SLR325DU-T31 (TAPE) R836 1-216-043-00 RES, CHIP 560 5% 1/10W
D820 8-719-074-42 LED SLR325VR-T31 (STANDBY I/1) R837 1-216-065-00 RES, CHIP 4.7K 5% 1/10W
D821 8-719-074-40 LED SLR325DU-T31 (VIDEO) R838 1-216-043-00 RES, CHIP 560 5% 1/10W
D822 8-719-074-42 LED SLR325VR-T31 (HI-SPEED DUBBING) R839 1-216-041-00 METAL CHIP 470 5% 1/10W
D823 8-719-074-90 LED SELU6814C-TP5 R840 1-216-043-00 RES, CHIP 560 5% 1/10W
(DISC TRAY ILLUMINATION)
R841 1-216-065-00 RES, CHIP 4.7K 5% 1/10W
< IC > R842 1-216-047-00 RES, CHIP 820 5% 1/10W
R843 1-216-043-00 RES, CHIP 560 5% 1/10W
IC804 8-742-132-00 HYB IC SBX1976-51 R844 1-216-065-00 RES, CHIP 4.7K 5% 1/10W
(REMOTE CONTROL RECEIVER) R845 1-216-043-00 RES, CHIP 560 5% 1/10W
< TRANSISTOR > R846 1-216-045-00 METAL CHIP 680 5% 1/10W

R847 1-216-047-00 RES, CHIP 820 5% 1/10W
Q807 8-729-900-53 TRANSISTOR DTC114EKA-T146 R848 1-216-051-00 METAL CHIP 1.2K 5% 1/10W
Q808 8-729-900-53 TRANSISTOR DTC114EKA-T146 R850 1-216-065-00 RES, CHIP 4.7K 5% 1/10W
Q809 8-729-900-53 TRANSISTOR DTC114EKA-T146
Q810 8-729-900-53 TRANSISTOR DTC114EKA-T146 < ROTARY ENCODER >
RV801 1-473-392-11 ENCODER, ROTARY (VOLUME)
Q813 8-729-900-53 TRANSISTOR DTC114EKA-T146 < SWITCH >
Q815 8-729-900-53 TRANSISTOR DTC114EKA-T146 S800 1-571-760-11 SWITCH, KEY BOARD (TUNING –)
Q816 8-729-900-53 TRANSISTOR DTC114EKA-T146 S801 1-571-760-11 SWITCH, KEY BOARD (TUNING +)
S802 1-571-760-11 SWITCH, KEY BOARD (REC z)
< RESISTOR > S803 1-571-760-11 SWITCH, KEY BOARD (TAPE B m)
S804 1-571-760-11 SWITCH, KEY BOARD (TAPE B M)
R800 1-216-079-00 METAL CHIP 18K 5% 1/10W
R801 1-216-069-00 METAL CHIP 6.8K 5% 1/10W S805 1-571-760-11 SWITCH, KEY BOARD (TAPE B x)
R802 1-216-061-00 METAL CHIP 3.3K 5% 1/10W S806 1-571-760-11 SWITCH, KEY BOARD (TAPE B Y)
R803 1-216-055-00 METAL CHIP 1.8K 5% 1/10W S807 1-571-760-11 SWITCH, KEY BOARD (TUNER BAND)
R804 1-216-051-00 METAL CHIP 1.2K 5% 1/10W S808 1-571-760-11 SWITCH, KEY BOARD (CD x)
S809 1-571-760-11 SWITCH, KEY BOARD (CD u)
R805 1-216-047-00 RES, CHIP 820 5% 1/10W
R806 1-216-045-00 METAL CHIP 680 5% 1/10W S810 1-571-760-11 SWITCH, KEY BOARD (TUNING MODE)
R807 1-216-065-00 RES, CHIP 4.7K 5% 1/10W S811 1-571-760-11 SWITCH, KEY BOARD (REPEAT)
R808 1-216-065-00 RES, CHIP 4.7K 5% 1/10W S812 1-571-760-11 SWITCH, KEY BOARD (PLAY MODE)
R809 1-216-065-00 RES, CHIP 4.7K 5% 1/10W S813 1-571-760-11 SWITCH, KEY BOARD (CD . m)
S814 1-571-760-11 SWITCH, KEY BOARD (CD > M)
R810 1-216-065-00 RES, CHIP 4.7K 5% 1/10W
R811 1-216-079-00 METAL CHIP 18K 5% 1/10W S815 1-571-760-11 SWITCH, KEY BOARD (EJECT Z)
R812 1-216-069-00 METAL CHIP 6.8K 5% 1/10W S817 1-571-760-11 SWITCH, KEY BOARD (DSG)
R813 1-216-061-00 METAL CHIP 3.3K 5% 1/10W S818 1-571-760-11 SWITCH, KEY BOARD (VIDEO)
R814 1-216-055-00 METAL CHIP 1.8K 5% 1/10W S819 1-571-760-11 SWITCH, KEY BOARD (MD)
R815 1-216-051-00 METAL CHIP 1.2K 5% 1/10W S820 1-571-760-11 SWITCH, KEY BOARD (TAPE)
R816 1-216-047-00 RES, CHIP 820 5% 1/10W S821 1-571-760-11 SWITCH, KEY BOARD (CD)
R817 1-216-045-00 METAL CHIP 680 5% 1/10W S822 1-571-760-11 SWITCH, KEY BOARD (TUNER)
R819 1-216-069-00 METAL CHIP 6.8K 5% 1/10W S823 1-571-760-11 SWITCH, KEY BOARD (STANDBY ?/1)
S824 1-571-760-11 SWITCH, KEY BOARD (X)
R820 1-216-061-00 METAL CHIP 3.3K 5% 1/10W
R821 1-216-055-00 METAL CHIP 1.8K 5% 1/10W S825 1-571-760-11 SWITCH, KEY BOARD (CD SYNC)
R822 1-216-051-00 METAL CHIP 1.2K 5% 1/10W S827 1-571-760-11 SWITCH, KEY BOARD (HI-SPEED DUBBING)
R823 1-216-047-00 RES, CHIP 820 5% 1/10W S828 1-571-760-11 SWITCH, KEY BOARD (TAPE A m)
R824 1-216-045-00 METAL CHIP 680 5% 1/10W S829 1-571-760-11 SWITCH, KEY BOARD (TAPE A M)
S830 1-571-760-11 SWITCH, KEY BOARD (TAPE A x)
58
CONTROL HEADPHONE LCD LEAF SWITCH LOADING MAIN
S831 1-571-760-11 SWITCH, KEY BOARD (TAPE A Y) S1009 1-571-281-21 SWITCH, LEAF (DECK B REC)
S832 1-771-290-11 SWITCH, SLIDE (BASS) **************************************************************
S833 1-771-290-11 SWITCH, SLIDE (TREBLE)
************************************************************** * 1-640-523-11 LOADING BOARD
**************
1-675-153-11 HEADPHONE BOARD
***************** < CONNECTOR >
< JACK > * CN900 1-568-943-11 PIN, CONNECTOR 5P
J301 1-785-925-11 JACK (PHONES) < SWITCH >

**************************************************************
S901 1-692-667-11 SWITCH, LEAF (DISC TRAY CLOSE DET)
1-675-150-11 LCD BOARD S902 1-692-667-11 SWITCH, LEAF (DISC TRAY OPEN DET)
********** **************************************************************
4-217-319-01 PLATE, LCD LIGHT A-4426-641-A MAIN BOARD, COMPLETE (AEP, UK, AED)
A-4426-844-A MAIN BOARD, COMPLETE (EA, SP)
< CONNECTOR > A-4428-617-A MAIN BAORD, COMPLETE (AUS)
*********************
CN802 1-793-599-11 SOCKET, CONNECTOR 17P
CN804 1-793-601-11 SOCKET, CONNECTOR 21P A-4411-460-A TUNER PACK (AEP, UK, AED)
A-4426-617-A TUNER PACK (EA, SP, AUS)
< LED > 7-685-546-14 SCREW +BTP 3X8 TYPE2 N-S
D657 8-719-075-51 LED SELS6B14C-LF62 (LCD BACK LIGHT) < CAPACITOR >
D658 8-719-075-51 LED SELS6B14C-LF62 (LCD BACK LIGHT)
D659 8-719-075-51 LED SELS6B14C-LF62 (LCD BACK LIGHT) C101 1-126-963-11 ELECT 4.7uF 20% 50V
D660 8-719-075-51 LED SELS6B14C-LF62 (LCD BACK LIGHT) C102 1-126-963-11 ELECT 4.7uF 20% 50V
C103 1-126-963-11 ELECT 4.7uF 20% 50V
< SHORT > C104 1-126-963-11 ELECT 4.7uF 20% 50V
C105 1-126-963-11 ELECT 4.7uF 20% 50V
JR601 1-216-296-00 SHORT 0
C106 1-126-963-11 ELECT 4.7uF 20% 50V
< LIQUID CRYSTAL DISPLAY > C107 1-163-005-11 CERAMIC CHIP 470PF 10% 50V
C109 1-126-963-11 ELECT 4.7uF 20% 50V
LCD801 1-803-542-11 DISPLAY PANEL, LIQUID CRYSTAL C110 1-126-963-11 ELECT 4.7uF 20% 50V
************************************************************** C111 1-163-023-00 CERAMIC CHIP 0.015uF 5% 50V
* 1-650-669-11 LEAF SWITCH BOARD C112 1-163-023-00 CERAMIC CHIP 0.015uF 5% 50V
****************** C113 1-164-004-11 CERAMIC CHIP 0.1uF 10% 25V
< CONNECTOR > C115 1-163-014-00 CERAMIC CHIP 0.0027uF 10% 50V
* CN1001 1-695-372-31 PIN, CONNECTOR (PC BOARD) 11P
< PHOTO REFLECTOR > C118 1-163-005-11 CERAMIC CHIP 470PF 10% 50V
Q1001 8-749-010-90 PHOTO REFLECTOR NJL5165KA-H2 C130 1-104-664-11 ELECT 47uF 20% 16V
Q1002 8-749-010-90 PHOTO REFLECTOR NJL5165KA-H2 C131 1-163-117-00 CERAMIC CHIP 100PF 5% 50V
< RESISTOR > C201 1-126-963-11 ELECT 4.7uF 20% 50V

C202 1-126-963-11 ELECT 4.7uF 20% 50V
R1001 1-247-818-11 CARBON 300 5% 1/4W C203 1-126-963-11 ELECT 4.7uF 20% 50V
R1004 1-247-834-11 CARBON 1.3K 5% 1/4W
< SWITCH > C209 1-126-963-11 ELECT 4.7uF 20% 50V
C210 1-126-963-11 ELECT 4.7uF 20% 50V
S1001 1-692-832-11 SWITCH, PUSH (1KEY) (DECK A PLAY) C211 1-163-023-00 CERAMIC CHIP 0.015uF 5% 50V
S1002 1-692-832-11 SWITCH, PUSH (1KEY) (DECK B PLAY)
S1003 1-572-248-11 SWITCH, LEAF (DECK A HALF) C212 1-163-023-00 CERAMIC CHIP 0.015uF 5% 50V
S1004 1-571-281-21 SWITCH, LEAF (DECK A 120/70) C213 1-164-004-11 CERAMIC CHIP 0.1uF 10% 25V
S1005 1-571-281-21 SWITCH, LEAF (DECK A REC) C214 1-164-004-11 CERAMIC CHIP 0.1uF 10% 25V
S1006 1-572-248-11 SWITCH, LEAF (DECK B HALF) C216 1-163-005-11 CERAMIC CHIP 470PF 10% 50V
S1008 1-571-281-21 SWITCH, LEAF (DECK B 120/70)
59
MAIN
C217 1-163-005-11 CERAMIC CHIP 470PF 10% 50V C405 1-124-480-11 ELECT 470uF 20% 25V
C229 1-163-005-11 CERAMIC CHIP 470PF 10% 50V C800 1-163-021-11 CERAMIC CHIP 0.01uF 10% 50V
C230 1-104-664-11 ELECT 47uF 20% 16V C801 1-163-021-11 CERAMIC CHIP 0.01uF 10% 50V
C231 1-163-117-00 CERAMIC CHIP 100PF 5% 50V C802 1-104-664-11 ELECT 47uF 20% 16V
C303 1-130-495-00 MYLAR 0.1uF 5% 50V C805 1-104-664-11 ELECT 47uF 20% 16V
C307 1-124-907-11 ELECT 10uF 20% 50V
C308 1-124-907-11 ELECT 10uF 20% 50V C810 1-128-647-11 DOUBLE LAYER 0.1F
C310 1-124-443-00 ELECT 100uF 20% 10V C812 1-104-664-11 ELECT 47uF 20% 16V
(AEP, UK, AED)
C313 1-126-942-61 ELECT 1000uF 20% 25V (AEP, UK, AED)
C315 1-164-004-11 CERAMIC CHIP 0.1uF 10% 25V (AEP, UK, AED)
C316 1-104-666-11 ELECT 220uF 20% 16V
C318 1-104-666-11 ELECT 220uF 20% 16V C816 1-126-963-11 ELECT 4.7uF 20% 50V
C325 1-104-665-11 ELECT 100uF 20% 16V (AEP, UK, AED)
(AEP, UK, AED)
C328 1-104-665-11 ELECT 100uF 20% 16V
C329 1-164-004-11 CERAMIC CHIP 0.1uF 10% 25V < CONNECTOR >
C330 1-104-665-11 ELECT 100uF 20% 16V
C331 1-104-665-11 ELECT 100uF 20% 16V * CN301 1-569-935-11 SOCKET, CONNECTOR 19P
C332 1-124-480-11 ELECT 470uF 20% 25V * CN306 1-568-954-11 PIN, CONNECTOR 5P
C333 1-124-907-11 ELECT 10uF 20% 50V CN402 1-569-928-11 SOCKET, CONNECTOR 11P
C335 1-104-666-11 ELECT 220uF 20% 16V
C337 1-164-004-11 CERAMIC CHIP 0.1uF 10% 25V * CN805 1-506-984-11 PIN, CONNECTOR (PC BOARD) 2P
C339 1-124-907-11 ELECT 10uF 20% 50V * CN808 1-506-984-11 PIN, CONNECTOR (PC BOARD) 2P
C346 1-164-004-11 CERAMIC CHIP 0.1uF 10% 25V < DIODE >
C347 1-104-664-11 ELECT 47uF 20% 16V
C348 1-164-004-11 CERAMIC CHIP 0.1uF 10% 25V D301 8-719-991-33 DIODE 1SS133T-77
D304 8-719-991-33 DIODE 1SS133T-77
C351 1-163-017-00 CERAMIC CHIP 0.0047uF 5% 50V D314 8-719-109-89 DIODE MTZJ-T-77-5.6B
C352 1-163-005-11 CERAMIC CHIP 470PF 10% 50V D315 8-719-991-33 DIODE 1SS133T-77
C353 1-130-495-00 MYLAR 0.1uF 5% 50V D317 8-719-921-75 DIODE MTZN-T-77-10B
C355 1-124-903-11 ELECT 1uF 20% 50V
C357 1-124-907-11 ELECT 10uF 20% 50V D318 8-719-991-33 DIODE 1SS133T-77
D319 8-719-921-63 DIODE MTZJ-T-77-7.5B
C380 1-104-665-11 ELECT 100uF 20% 16V
C401 1-162-851-11 CERAMIC 0.1uF 16V D323 8-719-929-15 DIODE MTZJ-T-77-9.1B
D324 8-719-981-95 DIODE MTZJ-T-77-2.7B
C402 1-162-851-11 CERAMIC 0.1uF 16V D325 8-719-991-33 DIODE 1SS133T-77
C403 1-162-851-11 CERAMIC 0.1uF 16V D330 8-719-991-33 DIODE 1SS133T-77
60
MAIN
D804 8-719-991-33 DIODE 1SS133T-77 JR343 1-216-296-00 SHORT 0
D805 8-719-982-11 DIODE MTZJ-T-77-4.3B (AEP, UK, AED) JR344 1-216-296-00 SHORT 0
D808 8-719-991-33 DIODE 1SS133T-77
JR354 1-216-295-00 SHORT 0
D815 8-719-991-33 DIODE 1SS133T-77
D816 8-719-991-33 DIODE 1SS133T-77 < JACK >
< IC > PJ303 1-785-926-11 JACK, PIN 6P (LINE OUT, MD IN, VIDEO IN)
IC301 8-759-585-01 IC TDA7439 < TRANSISTOR >

IC302 8-759-909-71 IC BA4558F-E2
IC304 8-759-584-41 IC K1A7808PI Q101 8-729-920-31 TRANSISTOR DTC343TK-T-146
IC305 8-759-584-40 IC KA7908 Q102 8-729-920-31 TRANSISTOR DTC343TK-T-146
IC306 8-759-347-19 IC KIA7812PI Q103 8-729-920-31 TRANSISTOR DTC343TK-T-146
Q106 8-729-920-31 TRANSISTOR DTC343TK-T-146
IC308 8-749-921-12 IC GP1F32T (OPTICAL DIGITAL OUT (CD)) Q201 8-729-920-31 TRANSISTOR DTC343TK-T-146
IC309 8-759-584-65 IC KA3082
IC310 8-759-324-40 IC KIA7805PI Q202 8-729-920-31 TRANSISTOR DTC343TK-T-146
IC311 8-759-584-41 IC K1A7808PI Q203 8-729-920-31 TRANSISTOR DTC343TK-T-146
IC401 8-759-363-21 IC HA12203 Q206 8-729-920-31 TRANSISTOR DTC343TK-T-146
Q303 8-729-027-31 TRANSISTOR DTA124EKA-T146
IC402 8-759-584-65 IC KA3082 Q304 8-729-900-53 TRANSISTOR DTC114EKA-T146
IC800 8-759-153-90 IC uPD7225GB-3B7
IC801 8-759-584-64 IC BMR0301H Q310 8-729-019-00 TRANSISTOR 2SD2394-G
IC802 8-752-908-92 IC CXP84332-168Q Q311 8-729-027-23 TRANSISTOR DTA114EKA-T146
IC803 8-759-557-36 IC BU1924F-E2 (AEP, UK, AED) Q312 8-729-901-00 TRANSISTOR DTC124EKA-T146
Q313 8-729-028-54 TRANSISTOR KTC3205-Y-AT
< SHORT> Q314 8-729-028-54 TRANSISTOR KTC3205-Y-AT
JR301 1-216-296-00 SHORT 0 Q315 8-729-027-23 TRANSISTOR DTA114EKA-T146

JR302 1-216-296-00 SHORT 0 Q316 8-729-901-00 TRANSISTOR DTC124EKA-T146

JR309 1-216-296-00 SHORT 0 Q323 8-729-801-84 TRANSISTOR 2SB1013-TP-34

JR323 1-216-296-00 SHORT 0 Q804 8-729-801-84 TRANSISTOR

2SB1013-TP-34
DTC114EKA-T146
DTC114EKA-T146
2SC2412K-T-146-R
JR329 1-216-296-00 SHORT 0 (AEP, UK, AED)
Q850 8-729-801-84 TRANSISTOR 2SB1013-TP-34
JR330 1-216-296-00 SHORT 0
JR332 1-216-296-00 SHORT 0
JR333 1-216-296-00 SHORT 0 < RESISTOR >
JR334 1-216-296-00 SHORT 0
R103 1-216-057-00 METAL CHIP 2.2K 5% 1/10W
JR341 1-216-296-00 SHORT 0
R109 1-216-057-00 METAL CHIP 2.2K 5% 1/10W
61
MAIN
R111 1-216-049-11 RES, CHIP 1K 5% 1/10W R355 1-216-057-00 METAL CHIP 2.2K 5% 1/10W
R113 1-216-089-00 RES, CHIP 47K 5% 1/10W R357 1-216-079-00 METAL CHIP 18K 5% 1/10W
R358 1-216-069-00 METAL CHIP 6.8K 5% 1/10W
R114 1-216-057-00 METAL CHIP 2.2K 5% 1/10W R359 1-216-059-00 METAL CHIP 2.7K 5% 1/10W
R115 1-216-067-00 METAL CHIP 5.6K 5% 1/10W
R116 1-216-069-00 METAL CHIP 6.8K 5% 1/10W R390 1-216-089-00 RES, CHIP 47K 5% 1/10W
R117 1-216-089-00 RES, CHIP 47K 5% 1/10W R401 1-216-065-00 RES, CHIP 4.7K 5% 1/10W
R118 1-216-073-00 METAL CHIP 10K 5% 1/10W R402 1-216-065-00 RES, CHIP 4.7K 5% 1/10W
R403 1-216-065-00 RES, CHIP 4.7K 5% 1/10W
R133 1-216-049-11 RES, CHIP 1K 5% 1/10W
R134 1-216-025-00 RES, CHIP 100 5% 1/10W R405 1-216-089-00 RES, CHIP 47K 5% 1/10W
R408 1-216-089-00 RES, CHIP 47K 5% 1/10W
R138 1-216-073-00 METAL CHIP 10K 5% 1/10W
R205 1-216-055-00 METAL CHIP 1.8K 5% 1/10W R414 1-216-073-00 METAL CHIP 10K 5% 1/10W
R417 1-216-097-00 RES, CHIP 100K 5% 1/10W
R208 1-216-072-00 METAL CHIP 9.1K 5% 1/10W
R209 1-216-057-00 METAL CHIP 2.2K 5% 1/10W R454 1-216-065-00 RES, CHIP 4.7K 5% 1/10W
R211 1-216-049-11 RES, CHIP 1K 5% 1/10W R456 1-216-037-00 METAL CHIP 330 5% 1/10W
R457 1-216-069-00 METAL CHIP 6.8K 5% 1/10W
R212 1-216-049-11 RES, CHIP 1K 5% 1/10W R458 1-216-073-00 METAL CHIP 10K 5% 1/10W
R213 1-216-089-00 RES, CHIP 47K 5% 1/10W
R501 1-216-065-00 RES, CHIP 4.7K 5% 1/10W
R218 1-216-073-00 METAL CHIP 10K 5% 1/10W
R234 1-216-025-00 RES, CHIP 100 5% 1/10W R505 1-216-065-00 RES, CHIP 4.7K 5% 1/10W
R506 1-216-065-00 RES, CHIP 4.7K 5% 1/10W
R236 1-216-055-00 METAL CHIP 1.8K 5% 1/10W
R511 1-216-065-00 RES, CHIP 4.7K 5% 1/10W
R302 1-216-035-00 METAL CHIP 270 5% 1/10W R512 1-216-065-00 RES, CHIP 4.7K 5% 1/10W
R304 1-216-067-00 METAL CHIP 5.6K 5% 1/10W
R516 1-216-097-00 RES, CHIP 100K 5% 1/10W
R309 1-216-059-00 METAL CHIP 2.7K 5% 1/10W
R314 1-216-047-00 RES, CHIP 820 5% 1/10W R518 1-216-065-00 RES, CHIP 4.7K 5% 1/10W
R316 1-216-033-00 METAL CHIP 220 5% 1/10W R519 1-216-065-00 RES, CHIP 4.7K 5% 1/10W
R521 1-216-065-00 RES, CHIP 4.7K 5% 1/10W
R320 1-216-065-00 RES, CHIP 4.7K 5% 1/10W R522 1-216-049-11 RES, CHIP 1K 5% 1/10W
R321 1-216-065-00 RES, CHIP 4.7K 5% 1/10W
R526 1-216-049-11 RES, CHIP 1K 5% 1/10W
R337 1-216-041-00 METAL CHIP 470 5% 1/10W R527 1-216-049-11 RES, CHIP 1K 5% 1/10W
R338 1-216-001-00 METAL CHIP 10 5% 1/10W
R351 1-216-081-00 METAL CHIP 22K 5% 1/10W R529 1-216-049-11 RES, CHIP 1K 5% 1/10W
62
MAIN
R592 1-216-049-11 RES, CHIP 1K 5% 1/10W
R535 1-216-049-11 RES, CHIP 1K 5% 1/10W
R597 1-216-049-11 RES, CHIP 1K 5% 1/10W
R541 1-216-049-11 RES, CHIP 1K 5% 1/10W
R602 1-216-049-11 RES, CHIP 1K 5% 1/10W
R546 1-216-065-00 RES, CHIP 4.7K 5% 1/10W
R607 1-216-049-11 RES, CHIP 1K 5% 1/10W
R552 1-216-065-00 RES, CHIP 4.7K 5% 1/10W
R612 1-216-049-11 RES, CHIP 1K 5% 1/10W
R557 1-216-073-00 METAL CHIP 10K 5% 1/10W
R617 1-216-049-11 RES, CHIP 1K 5% 1/10W
R562 1-216-049-11 RES, CHIP 1K 5% 1/10W
R622 1-216-049-11 RES, CHIP 1K 5% 1/10W
R566 1-216-089-00 RES, CHIP 47K 5% 1/10W
R567 1-216-065-00 RES, CHIP 4.7K 5% 1/10W R624 1-247-812-11 CARBON 160 5% 1/4W
R568 1-216-049-11 RES, CHIP 1K 5% 1/10W R626 1-216-035-00 METAL CHIP 270 5% 1/10W
R569 1-216-065-00 RES, CHIP 4.7K 5% 1/10W (AEP, UK, AED)
R633 1-216-027-00 METAL CHIP 120 5% 1/10W
R571 1-216-013-00 METAL CHIP 33 5% 1/10W
R572 1-216-065-00 RES, CHIP 4.7K 5% 1/10W R637 1-216-041-00 METAL CHIP 470 5% 1/10W
R640 1-216-065-00 RES, CHIP 4.7K 5% 1/10W
R575 1-216-065-00 RES, CHIP 4.7K 5% 1/10W R641 1-216-065-00 RES, CHIP 4.7K 5% 1/10W
R576 1-216-065-00 RES, CHIP 4.7K 5% 1/10W
R579 1-216-065-00 RES, CHIP 4.7K 5% 1/10W R853 1-216-113-00 METAL CHIP 470K 5% 1/10W
(AEP, UK, AED)
R580 1-216-065-00 RES, CHIP 4.7K 5% 1/10W R854 1-216-043-00 RES, CHIP 560 5% 1/10W
R581 1-216-065-00 RES, CHIP 4.7K 5% 1/10W (AEP, UK, AED)
R583 1-216-041-00 METAL CHIP 470 5% 1/10W (AEP, UK, AED)
R584 1-216-065-00 RES, CHIP 4.7K 5% 1/10W
R856 1-216-097-00 RES, CHIP 100K 5% 1/10W
R585 1-216-041-00 METAL CHIP 470 5% 1/10W (AEP, UK, AED)
63
HCD-CP2
MAIN POWER Replace only with part number specified.
< VARIABLE RESISTOR > 0 F903 1-533-468-11 FUSE, TIME-LAG (DIA.5) (T2AL/250V)
RV301 1-225-213-21 RES, ADJ, CARBON 2.2K < RELAY >

RV351 1-225-213-21 RES, ADJ, CARBON 2.2K
0 RY901 1-755-321-11 RELAY (AEP, UK, AED, AUS)
< VIBRATOR >
< SWITCH >
X800 1-567-098-41 VIBRATOR, CRYSTAL (32.768kHz)
X801 1-767-184-11 VIBRATOR, CERAMIC (4.19MHz) 0 S901 1-552-921-00 SWITCH, POWER (VOLTAGE CHANGE)
X803 1-579-242-41 VIBRATOR, CRYSTAL (4.332MHz) (VOLTAGE SELECTOR) (EA, SP)
(AEP, UK, AED)
************************************************************** < TRANSFORMER >
1-675-155-11 POWER BOARD 0 T901 1-435-100-11 TRANSFORMER, POWER (AEP, UK, AED, AUS)
************* 0 T901 1-435-101-11 TRANSFORMER, POWER (EA, SP)
0 T902 1-433-811-11 TRANSFORMER, POWER (AEP, UK, AED, AUS)
1-533-313-11 HOLDER, FUSE **************************************************************
< CAPACITOR >

MISCELLANEOUS
0 C901 1-113-925-11 CERAMIC 0.01uF 20% 250V **************
(AEP, UK, AED, AUS)
C903 1-101-005-00 CERAMIC 22000PF 50V 57 1-791-437-11 WIRE (FLAT TYPE) (17 CORE)
(AEP, UK, AED, AUS) 58 1-791-438-11 WIRE (FLAT TYPE) (21 CORE) (180mm)
C904 1-101-005-00 CERAMIC 22000PF 50V 62 1-418-482-11 ILLUMINATION BLOCK, LED
(AEP, UK, AED, AUS) 66 1-791-435-11 WIRE (FLAT TYPE) (21 CORE) (105mm)
(AEP, UK, AED, AUS)
(AEP, UK, AED, AUS) 0 114 1-696-169-11 CORD, POWER
0 115 1-770-019-11 ADAPTOR, CONVERSION PLUG 3P (UK)
C907 1-101-005-00 CERAMIC 22000PF 50V 159 1-452-493-21 MAGNET
C909 1-101-005-00 CERAMIC 22000PF 50V
C910 1-101-005-00 CERAMIC 22000PF 50V 0 206 8-820-070-02 OPTICAL PICK-UP KSM-213CCP/K1N
C911 1-161-494-00 CERAMIC 0.022uF 25V 209 1-773-113-11 WIRE, FLAT TYPE (16 CORE)
HP101 1-500-093-11 HEAD, MAGNETIC (PLAY BACK) (DECK A)
C912 1-161-494-00 CERAMIC 0.022uF 25V HRPE1011-500-094-11 HEAD, MAGNETIC (REC/PB/ERASE) (DECK B)
C913 1-161-494-00 CERAMIC 0.022uF 25V M1 X-3371-223-1 MOTOR ASSY, CAPSTAN
C914 1-161-494-00 CERAMIC 0.022uF 25V
M2 A-2004-410-A MOTOR ASSY, DC (TRIGGER)
< CONNECTOR > M701 X-2646-381-1 MOTOR CHASSIS ASSY (MB) (SPINDLE)
M702 X-2625-769-1 MOTOR GEAR ASSY (MB) (RP) (SLED)
CN901 1-766-276-11 PIN, CONNECTOR (PC BOARD) 3P M901 X-2625-117-1 MOTOR ASSY, LOADING
CN902 1-766-279-11 PIN, CONNECTOR (PC BOARD) 6P 0 T901 1-435-100-11 TRANSFORMER, POWER (AEP, UK, AED, AUS)
CNP901 1-564-321-00 PIN, CONNECTOR 2P
0 T901 1-435-101-11 TRANSFORMER, POWER (EA, SP)
< DIODE > **************************************************************
D902 8-719-200-82 DIODE 11ES2-TA1B (AEP, UK, AED, AUS) **************

D903 8-719-200-82 DIODE 11ES2-TA1B (AEP, UK, AED, AUS) HARDWARE LIST
D904 8-719-200-82 DIODE 11ES2-TA1B (AEP, UK, AED, AUS) **************
D905 8-719-200-82 DIODE 11ES2-TA1B (AEP, UK, AED, AUS)
D906 8-719-200-82 DIODE 11ES2-TA1B (AEP, UK, AED, AUS) #1 7-685-546-14 SCREW +BTP 3X8 TYPE2 N-S
#2 7-685-245-14 SCREW +KTP 3X6 TYPE2 NON-SLIT
D907 8-719-902-17 DIODE 1N5401 #3 7-685-647-79 SCREW +PTP DIA.12 WH 3
D908 8-719-902-17 DIODE 1N5401 #4 7-685-659-14 SCREW +BVTP 4X8 TYPE2 N-S
D909 8-719-902-17 DIODE 1N5401 #5 7-685-135-19 SCREW +P 2.6X10 TYPE2 NON-SLIT
D910 8-719-902-17 DIODE 1N5401
D911 8-719-046-07 DIODE 2A02M #6 7-621-255-32 SCREW +P 2X5
#7 7-685-533-19 SCREW +BTP 2.6X6 TYPE2 N-S
D912 8-719-046-07 DIODE 2A02M #8 7-685-131-19 SCREW +BTP 2.6X4 TYPE2 N-S
D913 8-719-046-07 DIODE 2A02M #9 7-685-862-09 SCREW +BVTT 2.6X6 (S)
D914 8-719-046-07 DIODE 2A02M #10 7-685-534-19 SCREW +BTP 2.6X8 TYPE2 N-S
< FUSE > #11 7-623-921-01 RING, RETAINING, CAPSTAN

#12 7-621-775-00 SCREW +B 2.6X3
0 F901 1-533-464-11 FUSE, TIME-LAG (DIA.5) (T0.8AL/250V) #13 7-621-775-10 SCREW +B 2.6X4
0 F902 1-533-468-11 FUSE, TIME-LAG (DIA.5) (T2AL/250V)
9-928-969-12 Sony Corporation

2000E0030020-1F
Audio Entertainment Group Printed in Japan © 2000. 5
64 Published by HA Quality Assurance Dept.

Sony HCD-CP2

Uploaded by

Copyright:

Available Formats

Sony HCD-CP2

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Sony HCD-CP2

Uploaded by

Copyright:

Available Formats

HCD-CP2

SERVICE MANUAL AEP Model

HCD-CP2 is the Amplifier, CD player,

– Continued on next page –

MICRO HiFi COMPONENT SYSTEM

1. SERVICING NOTES ............................................... 3

4. TEST MODE .............................................................. 11

5. MECHANICAL ADJUSTMENTS ....................... 14

6. ELECTRICAL ADJUSTMENTS ......................... 14

8. EXPLODED VIEWS ................................................ 47

9. ELECTRICAL PARTS LIST ............................... 54

SAFETY-RELATED COMPONENT WARNING!!

NOTES ON LASER DIODE EMISSION CHECK VOLTAGE SELECTOR

Notes on chip component replacement

Flexible Circuit Board Repairing

This appliance is classified as a CLASS 1 LASER product.

Laser component in this product is capable of emitting radiation

The following caution label is located inside the unit.

CAUTION : INVISIBLE LASER RADIATION WHEN OPEN AND

1 two case screws

FRONT PANEL ASSY

1 two flat cables

6 front panel assy (To page 8)

4 Push these buttons.

2 screws (DIA. 12)

3 Break the soldering of

1 Break the soldering of

CD MECHANISM DECK (KSL-2130CCP/K1N)

3 coil spring (front)

3 coil spring (front)

2 chucking yoke (K)

4 Pull the tray (2130).

3 Rotate the control cam

2 Install the drive gear with gear

4 sub chassis (2130)

1 Install the control cam

Procedure: Shut off

REC pause for 3 seconds

Open the disc tray

Close the disc tray

[Liquid Crystal Display All Lit Check Mode]

[Tape Deck Aging Mode] Procedure:

Note: TRACKING GAIN UP mode is not used in servicing.

3. Confirm the RF level of waveform satisfy specified value as

5. LPC OFF Mode

6. Releasing the CD Test Mode

Sample Value of Wow and flutter: 0.3% or less W. RMS (JIS)

Deck A is RV311 (L-CH) and RV411 (R-CH), Deck B is RV301

Pin rs (GND) of IC401 on the MAIN

2. Mode: Playback RECORD

IC401 (Pin 8 : L-CH)

Confirm playback the signal recorded in step 1 become adjustable

Pin 6 (L-CH) of IC401 on the MAIN board.

Pin rs (GND) of IC401 on the MAIN board.

IC401 (Pin 8 : L-CH)

Confirm playback the signal recorded in step 1 become adjustable

Focus Bias Check

center of the waveform can be clearly distinguished.

DIGITAL SIGNAL PROCESSOR, FILTER

SERVO AUTO SEQUENCER