This document provides specifications and part lists for a compact disc stereo radio cassette recorder. It includes:
- A list of accessories and their part numbers.
- Cautions about laser safety when servicing due to a laser beam, including keeping a distance of 30cm or more from the optical pickup block.
- Electrical main parts lists including integrated circuits, transistors, diodes, and capacitors along with their part numbers and descriptions.
This document provides specifications and part lists for a compact disc stereo radio cassette recorder. It includes:
- A list of accessories and their part numbers.
- Cautions about laser safety when servicing due to a laser beam, including keeping a distance of 30cm or more from the optical pickup block.
- Electrical main parts lists including integrated circuits, transistors, diodes, and capacitors along with their part numbers and descriptions.
This document provides specifications and part lists for a compact disc stereo radio cassette recorder. It includes:
- A list of accessories and their part numbers.
- Cautions about laser safety when servicing due to a laser beam, including keeping a distance of 30cm or more from the optical pickup block.
- Electrical main parts lists including integrated circuits, transistors, diodes, and capacitors along with their part numbers and descriptions.
This document provides specifications and part lists for a compact disc stereo radio cassette recorder. It includes:
- A list of accessories and their part numbers.
- Cautions about laser safety when servicing due to a laser beam, including keeping a distance of 30cm or more from the optical pickup block.
- Electrical main parts lists including integrated circuits, transistors, diodes, and capacitors along with their part numbers and descriptions.
Copyright:
Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online from Scribd
Download as pdf or txt
You are on page 1/ 10
CSD-TD31
CSD-TD32
LHS US UW
SERVICE MANUAL BASIC TAPE MECHANISM : TN-21ZVC-2000 BASIC CD MECHANISM : DA11T3C
S/M Code No. 09-003-342-8N1
DA TA
COMPACT DISC STEREO RADIO
CASSETTE RECORDER
SPECIFICATIONS
Design and specifications are subject to change without
notice .
ACCESSORIES/PACKAGE LIST
REF. NO
! ! !
PART NO.
KANRI DESCRIPTION NO. 1 8A-CHB-902-010 IB,LH(ESP)FM<1LH> 1 8A-CHB-903-010 IB,U(ESF)FM<2UW,1US> 2 87-A80-036-010 AC CORD SET ASSY,E W/FLTR VOL <1LH> 2 87-A80-109-010 AC CORD,HK7281 BLK U<2UW,1US> 3 87-A91-017-010 PLUG,CONVERSION JT-0476<1LH>
PROTECTION OF EYES FROM LASER BEAM DURING SERVICING
This set employs laser. Therefore, be sure to follow carefully the instructions below when servicing.
CAUTION Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.
WARNING! WHEN SERVICING, DO NOT APPROACH THE LASER EXIT WITH THE EYE TOO CLOSELY. IN CASE IT IS NECESSARY TO CONFIRM LASER BEAM EMISSION. BE SURE TO OBSERVE FROM A DISTANCE OF MORE THAN 30cm FROM THE SURFACE OF THE OBJECTIVE LENS ON THE OPTICAL PICK-UP BLOCK.
ATTENTION L'utilisation de commandes, rglages ou procdures autres que ceux spcifis peut entraner une dangereuse exposition aux radiations.
ADVARSEL!
Caution: Invisible laser radiation when
open and interlocks defeated avoid exposure to beam. Advarsel:Usynling laserstling ved bning, nr sikkerhedsafbrydere er ude af funktion. Undg udsttelse for strling.
Usynlig laserstling ved bning, nr sikkerhedsafbrydereer ude
af funktion. Undg udsttelse for strling. This Compact Disc player is classified as a CLASS 1 LASER product. The CLASS 1 LASER PRODUCT label is located on the rear exterior.
VAROITUS! Laiteen Kyttminen muulla kuin tss kyttohjeessa mainitulla tavalla saattaa altistaa kyt-tjn turvallisuusluokan 1 ylittvlle nkymttmlle lasersteilylle.
CLASS 1 KLASSE 1 LUOKAN 1 KLASS 1
VARNING!
LASER PRODUCT LASER PRODUKT LASER LAITE LASER APPARAT
Om apparaten anvnds p annat stt n vad som specificeras i
denna bruksanvising, kan anvndaren utsttas fr osynling laserstrlning, som verskrider grnsen fr laserklass 1.
Precaution to replace Optical block
(SF-P101NR)
PICK-UP Assy P.C.B
Body or clothes electrostatic potential could ruin
laser diode in the optical block. Be sure ground body and workbench, and use care the clothes do not touch the diode. 1) After the connection, remove solder shown in the right figure.
Solder
ELECTRICAL MAIN PARTS LIST
REF. NO
PART NO.
KANRI NO.
DESCRIPTION
REF. NO
IC 87-A21-550-010 87-A21-185-040 87-A21-064-010 87-A21-520-040 87-A20-446-010
CERA-SOL 0.022 CERA-SOL 0.022 CERA-SOL 0.022 CERA-SOL 0.022 ASSY,3P POWER
MOTOR C.B M2 PIN3 SW1 BATT C.B
Regarding connectors, they are not stocked as they are not the initial order items. The connectors are available after they are supplied from connector manufacturers upon the order is received.
