Scribd
Upload
210 views2 pages

Concrete Design Coursework 4 Heriot Watt

concrete design coursework heriot watt

Uploaded by

Mustafa Hyali
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
210 views2 pages

Concrete Design Coursework 4 Heriot Watt

concrete design coursework heriot watt

Uploaded by

Mustafa Hyali
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Client Heriot-Watt University DESIGN OF CONCRETE

Sub Contractor: TATA STEEL

Coursework #4

1 2 OF

Question 1

Beam Length = 8 m Load on beam = 17.8 kN/m Fck = 35 N/mm2 Fyk = 500 N/mm2 Support width = 300 mm S = 175mm 2 H12 bars

Total Load on beam = 17.8 x 8 = 142.4 kN Support reaction = VEf = 71.2 [17.8 x (0.3/2)] = 68.53 kN

(shear at face of support) VEd = 53.4 17.8 x 0.65 = 41.83 kN Step 3: calculate additional longitudinal tensile forces*

Step 1: Check crushing strength Vrd,max


at = 22 VRd,max (22) = ( )

VRd,max (22) = 849.121 kN ( > VEf)

Step2: determine shear resistance

*This force can usually be allowed for by increasing the curtailment length of the tension bars.

Client Heriot-Watt University DESIGN OF CONCRETE

Sub Contractor: TATA STEEL

Coursework #4

2 2 OF

Question 2

Step 2: calculate torsional reinforcements

= 0.018
Beam Length = 8 m Load on beam = 17.8 kN/m Fck = 35 N/mm2 Fyk = 500 N/mm2 Support width = 300 mm S = 175mm 2 H12 bars

Use H8 @ 300mm Step 3: longitudinal reinforcements


( )

Step 4: torsion combined with bending and shear

= 0.0766 Step1: find Trd, max

2(350 + 650 2(113.75))

You might also like