Scribd Logo
Upload

Welcome to Scribd!

  • 3K views

    INTECONT® Tersus For Measuring Systems: % Compact Weighing Electronics For

    Uploaded by

    gnazareth_
    INTECONT(r) Tersus weighing electronics is specially designed for weighing in continuous production processes. It is the right solution whenever material flows have to be measured and acquired with high accuracy. The colour LCD-display shows clearly measuring values and status information.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd

    INTECONT® Tersus For Measuring Systems: % Compact Weighing Electronics For

    Uploaded by

    gnazareth_
    3K views4 pages
    INTECONT(r) Tersus weighing electronics is specially designed for weighing in continuous production processes. It is the right solution whenever material flows have to be measured and acquired with high accuracy. The colour LCD-display shows clearly measuring values and status information.

    Original Title

    Intecont Tersus

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    INTECONT(r) Tersus weighing electronics is specially designed for weighing in continuous production processes. It is the right solution whenever material flows have to be measured and acquired with high accuracy. The colour LCD-display shows clearly measuring values and status information.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    3K views4 pages

    INTECONT® Tersus For Measuring Systems: % Compact Weighing Electronics For

    Uploaded by

    gnazareth_
    INTECONT(r) Tersus weighing electronics is specially designed for weighing in continuous production processes. It is the right solution whenever material flows have to be measured and acquired with high accuracy. The colour LCD-display shows clearly measuring values and status information.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 4

    INTECONT Tersus for Measuring Systems

    Compact weighing electronics for continuous measuring systems High resolution colour LCD-Display User language selectable and loadable Optimal communication structures for fieldbuses and Ethernet-Networks EasyServe PC program for convenient commissioning and service High operating convenience, automatic calibration programs

    % % % % %

    % Optional legal-for-trade variant

    Application
    The INTECONT Tersus weighing electronics is specially designed for weighing in continuous production processes. It is the right solution whenever material flows have to be measured and acquired with high accuracy with the use of % % % Belt weighers (MULTIBELT) Solids flow meters (MULTISTREAM) [in 2012] Coriolis mass flow meters (MULTICOR) [in 2012]

    Equipment
    The electronics is supplied as front-ofpanel mounting unit or with an optional wall-mounting housing for installation at site. The system is operated via an ergonomically styled keyboard organised into operating and service functions. The colour LCD-display shows clearly measuring values and status information. Equipped with appropriate communication module, INTECONT Tersus optimally fits into any automated environment. The Ethernet network connection is included in the basic equipment. % % % % % % % High electromagnetic compatibility Galvanically isolated outputs Totalizing counter pulses Fail-safe data memory Integrated diagnostics and self-testing functions Preset with default values for easy and quick commissioning User language in German, English, Italian, Spanish and French. More languages loadable including Chinese or Russian (Cyrillic) Automatic calibration programs, theoretical span calibration without auxiliaries Configurable and selectable display modes Simulation mode for testing and learning Status, event, calibration and quantity reports

    This also covers special applications, e.g. legal-for-trade weighing or use in the hazardous area [in 2012]. The INTECONT Tersus weighing electronics is primarily designed for applications with a need for convenient and elaborate display, control and monitoring, in addition to basic measuring functions. The weighing electronics ensures repeatability and transparency of the production process.

    Operating principle

    Although the INTECONT Tersus functions vary with every scale type, the basic % equipment is always the same: % % % System accuracy for weighing tasks better than 0.05 % Manual and/or automatic zero setting Full feed/dribble feed control for accurate batching % %

    BV-D2407GB

    Weighing functions
    As a function of mechanical system used, the actual feed rate is acquired using: % Belt load and belt speed (belt weighers) % Reactive force (solids flow meters) % Direct mass flow measurement on the Coriolis principle (mass flow meters) In addition to the comprehensive basic equipment, the following weighing functions are available: % Belt weighers
    - Accurate belt speed

    Dimensions (mm) INTECONT Tersus


    for Front-of-Panel Mounting Panel cut-out 282 + 0,5 x 88 + 0,5

    297

    102

    max. 10 16 203

    measurement
    - Belt influence compensation

    (BIC)
    - Belt run monitoring - Shifting of weighing to point of

    discharge
    - Legal-for-trade variant (upon

    Wall-mounting Housing
    Selected in accordance with application

    request) % Solids Flow Meters


    - Adaption to varying measuring

    chute characteristics % Coriolis Mass Flow Meters


    - Accurate speed and torque

    600

    630

    acquisition

    430 500

    300

    Technical Data
    Display Keyboard Power supply Temperatures Graphical LCD display, adjustable brightness 22 keys 24 VDC +50 % / -25 %, max. 20 VA Operating temperature: -40 C +60 C Storage temperature: -40 C +80 C Legal-for-trade operating temperature: -10 C +40 C Power supply: Load cell impedance: Cable length: 6 VAC R min 80 max. 1000 m

    Load cell input Housing Binary inputs Binary outputs Pulse output Analog outputs Analog input Serial Connections Power supply VNT0650 Internal (optional) Fieldbus (optional) Analog board (optional) VEA 20451

    Panel mount, optional clamps for IP65 5 x Optocoupler 18 36 VDC, typ. 5 mA 1 x NAMUR and 1 x NAMUR/Power 0,04 3000 Hz 8 x Relays, max. 230 V, 8 A ohm. / 1 A inductive load 1 x Optocoupler for the totalizing counter 24 V, 0,1 A, max. 10 Hz 2 x 0(4) 20 mA, load max. 500 0(4) 20 mA, input impedance 100 , or 0 10 V Interface 1: EasyServe Interface 2: Printer Interface 3: Large display 85 264 VAC / 24 VDC, 1,1 A Selectable: Modbus, PROFIBUS DP, DeviceNet, Ethernet/IP 2 Analog outputs 0(4 20 mA, load max. 500 , potential free, common reference 2 Analog inputs 0(4) 20 mA, input impedance 100 , potential free, common reference Wall housing IP65, 380 mm x 300 mm x 236 mm Netzteil 85 264 VAC / 24 VDC, 2 A 85 264 VAC / 24 VDC, 2 A, Panel mount unit 85 264 VAC / 24 VDC, 1,25 A, Tabletop device Printer with serial interface RS232 and system cable Selectable: VLD 20100 (LED, 100 mm); VLZ 20045 (LCD, 45 mm); VLZ 20100 (LCD, 100 mm)

    Wall housing Power supply Power supply Event printer Large displays

    Equipment supplied
    Designation Front-of-panel unit with software VBW 20650 for beltweigher Front-of-panel unit Front-of-panel unit with option Modbus Front-of-panel unit with option PROFIBUS Front-of-panel unit with option DeviceNet Front-of-panel unit with option Ethernet/IP Front-of-panel unit with software VBW 20660 for legal-for-trade beltweigher Front-of-panel unit Front-of-panel unit with option Modbus Front-of-panel unit with option PROFIBUS Front-of-panel unit with option DeviceNet Front-of-panel unit with option Ethernet/IP Communication modules Modbus PROFIBUS DeviceNet Ethernet/IP (software activation key) Options Power supply for assembly inside the device Analog board with 2 analog inputs and 2 analog outputs Protection class IP65 to front panel (set of clamps) Software EasyServe Large displays Large display 5-digit, LED, 100 mm digit height Large display 6-digit, LCD, 45 mm digit height Large display 5-digit, LCD, 100 mm digit height VSS 28020 VPB 28020 VCB 28020
    VET 20700 V081902.B01 V081901.B01 V081903.B01 V040035.B01 VEG 20650 V082002.B31 V082002.B32 V082002.B33 V082002.B34 V082002.B35

    Type

    Material number
    V082002.B01

    VEG 20650

    V082002.B02 V082002.B03 V082002.B04


    BV-D2407GB 1130.2 All information is given without obligation. All specifications are subject to change. by Schenck Process GmbH, 2011

    V082002.B05

    VNT0650 VEA 20451

    V082050.B01 V054098.B01 V082039.B01

    VPC 20150

    E144541.01

    VLD 20100 VLZ 20045 VLZ 20100

    V090252.B01 V067304.B01 V066611.B01

    Schenck Process GmbH Pallaswiesenstr. 100 64293 Darmstadt, Germany


    T +49 6151 1531-1216 F +49 6151 1531-1172

    [email protected] wwww.schenckprocess.com

    You might also like